Differential outcomes of venous and arterial tissue engineered vascular grafts highlight the importance of coupling long-term implantation studies with computational modeling.

Electrospinning is commonly used to generate polymeric scaffolds for tissue engineering. Using this approach, we developed a small-diameter tissue engineered vascular graft (TEVG) composed of poly-ε-caprolactone-co-l-lactic acid (PCLA) fibers and longitudinally assessed its performance within both the venous and arterial circulations of immunodeficient (SCID/bg) mice. Based on in vitro analysis demonstrating complete loss of graft strength by 12 weeks, we evaluated neovessel formation in vivo over 6-, 12- and 24-week periods. Mid-term observations indicated physiologic graft function, characterized by 100% patency and luminal matching with adjoining native vessel in both the venous and arterial circulations. An active and robust remodeling process was characterized by a confluent endothelial cell monolayer, macrophage infiltrate, and extracellular matrix deposition and remodeling. Long-term follow-up of venous TEVGs at 24 weeks revealed viable neovessel formation beyond graft degradation when implanted in this high flow, low-pressure environment. Arterial TEVGs experienced catastrophic graft failure due to aneurysmal dilatation and rupture after 14 weeks. Scaffold parameters such as porosity, fiber diameter, and degradation rate informed a previously described computational model of vascular growth and remodeling, and simulations predicted the gross differential performance of the venous and arterial TEVGs over the 24-week time course. Taken together, these results highlight the requirement for in vivo implantation studies to extend past the critical time period of polymer degradation, the importance of differential neotissue deposition relative to the mechanical (pressure) environment, and further support the utility of predictive modeling in the design, use, and evaluation of TEVGs in vivo. STATEMENT OF SIGNIFICANCE: Herein, we apply a biodegradable electrospun vascular graft to the arterial and venous circulations of the mouse and follow recipients beyond the point of polymer degradation. While venous implants formed viable neovessels, arterial grafts experienced catastrophic rupture due to aneurysmal dilation. We then inform a previously developed computational model of tissue engineered vascular graft growth and remodeling with parameters specific to the electrospun scaffolds utilized in this study. Remarkably, model simulations predict the differential performance of the venous and arterial constructs over 24 weeks. We conclude that computational simulations should inform the rational selection of scaffold parameters to fabricate tissue engineered vascular grafts that must be followed in vivo over time courses extending beyond polymer degradation.

Magnetic Resonance Imaging of Shear Stress and Wall Thickness in Tissue-Engineered Vascular Grafts.

OBJECTIVES: Tissue-engineered vascular grafts (TEVGs) have demonstrated potential for treating congenital heart disease (CHD); however, quantitative imaging for tracking functional and structural remodeling of TEVGs has not been applied. Therefore, we evaluated the potential of magnetic resonance (MR) imaging for assessing TEVG wall shear stress (WSS) and wall thickness in a large animal model. METHODS: Cell-seeded (n = 3) or unseeded (n = 3) TEVGs were implanted as inferior vena cava interposition grafts in juvenile lambs. Six months following implantation, two-dimensional phase-contrast MR imaging was performed at 3 slice locations (proximal, middle, and distal) to assess normalized WSS (i.e., WSS-to-cross sectional area). T2-weighted MR imaging was performed to assess TEVG wall thickness. Histology was qualitatively assessed, whereas immunohistochemistry was semiquantitatively assessed for smooth muscle cells (αSMA), macrophage lineage cells (CD11b), and matrix metalloproteinase activity (MMP-2 and MMP-9). Picrosirius Red staining was performed to quantify collagen content. RESULTS: TEVG wall thickness was significantly higher for proximal, middle, and distal slices in unseeded versus cell-seeded grafts. Significantly higher WSS values existed for proximal versus distal slice locations for cell-seeded TEVGs, whereas no differences in WSS existed between slices for unseeded TEVGs. Additionally, no differences in WSS existed between cell-seeded and unseeded groups. Both groups demonstrated elastin formation, without vascular calcification. Unseeded TEVGs possessed greater content of smooth muscle cells when compared with cell-seeded TEVGs. No differences in macrophage, MMP activity, or collagen content existed between groups. CONCLUSION: MR imaging allows for in vivo assessment of functional and anatomical characteristics of TEVGs and may provide a nonionizing approach that is clinically translatable to children undergoing treatment for CHD.

Engineered Tissue-Stent Biocomposites as Tracheal Replacements.

Here we report the creation of a novel tracheal construct in the form of an engineered, acellular tissue-stent biocomposite trachea (TSBT). Allogeneic or xenogeneic smooth muscle cells are cultured on polyglycolic acid polymer-metal stent scaffold leading to the formation of a tissue comprising cells, their deposited collagenous matrix, and the stent material. Thorough decellularization then produces a final acellular tubular construct. Engineered TSBTs were tested as end-to-end tracheal replacements in 11 rats and 3 nonhuman primates. Over a period of 8 weeks, no instances of airway perforation, infection, stent migration, or erosion were observed. Histological analyses reveal that the patent implants remodel adaptively with native host cells, including formation of connective tissue in the tracheal wall and formation of a confluent, columnar epithelium in the graft lumen, although some instances of airway stenosis were observed. Overall, TSBTs resisted collapse and compression that often limit the function of other decellularized tracheal replacements, and additionally do not require any cells from the intended recipient. Such engineered TSBTs represent a model for future efforts in tracheal regeneration.

Biomimetic Culture Reactor for Whole-Lung Engineering.

Decellularized organs are now established as promising scaffolds for whole-organ regeneration. For this work to reach therapeutic practice, techniques and apparatus are necessary for doing human-scale clinically applicable organ cultures. We have designed and constructed a bioreactor system capable of accommodating whole human or porcine lungs, and we describe in this study relevant technical details, means of assembly and operation, and validation. The reactor has an artificial diaphragm that mimics the conditions found in the chest cavity in vivo, driving hydraulically regulated negative pressure ventilation and custom-built pulsatile perfusion apparatus capable of driving pressure-regulated or volume-regulated vascular flow. Both forms of mechanical actuation can be tuned to match specific physiologic profiles. The organ is sealed in an elastic artificial pleura that mounts to a support architecture. This pleura reduces the fluid volume required for organ culture, maintains the organ's position during mechanical conditioning, and creates a sterile barrier allowing disassembly and maintenance outside of a biosafety cabinet. The combination of fluid suspension, negative-pressure ventilation, and physiologic perfusion allows the described system to provide a biomimetic mechanical environment not found in existing technologies and especially suited to whole-organ regeneration. In this study, we explain the design and operation of this apparatus and present data validating intended functions.

PPAR-γ agonist attenuates inflammation in aortic aneurysm patients.

BACKGROUND AND OBJECTIVE: Peroxisome proliferator-activated receptor (PPAR) -γ agonist, which is an anti-diabetes drug and reduces expression of tumor necrosis factor (TNF)-α, reported to have the effects for anti-inflammation in our body. In cardiovascular fields, this PPAR-γ agonist already reported to suppress progression of coronary atherosclerosis. Various cytokines, which is secreted from fat tissues around artery, promote atherosclerosis and/or aneurysmal changes in aorta/artery. Objective of our study is to clarify whether PPAR-γ agonist has anti-inflammatory effects in aorta of patients with aortic aneurysm (AA). PATIENTS AND METHODS: The medical ethics committee in Tokushima University Hospital approved protocol for this study. Sixteen patients with AA (more than 5 cm in diameter, scheduled open surgery) were divided into two groups; one is PPAR-γ agonist administrating group [Formula: see text] n = 6, group P[Formula: see text], and another is the without group [Formula: see text] n = 10, group C[Formula: see text]. PPAR-γ agonist, whose dose was 15 mg/day, was administrated in the group P for more than 2 months before aneurysectomy and grafting (mean; 4.2 ± 3.4 months) (Supplemental Table 1). Biopsy specimens were obtained from abdominal subcutaneous fat, greater omentum, retroperitoneal periaortic fat and aneurysmal wall in surgical procedure. Blood examination also achieved before/after procedure. Harvested specimens were analyzed with histology (HE and EVG), immunohistochemistry (macrophage) and RT-PCR (adiponectin, MCP-1, TNF-α, CD68, matrix metalloprotease (MMP)-2, MMP-9). RESULTS: Macrophage infiltration in aortic wall and retroperitoneal periaortic fat among group P was significantly decreased compared to that among group C. Adiponectin expressions in both subcutaneous fat and retroperitoneal periaortic fat among the group P (adiponectin/ß-actin) were significantly increased compared to those among the group C [subcutaneous fat; 16.8 ± 13.9 vs. 5.82 ± 2.94 (P = 0.04), retroperitoneal periaortic fat; 21.3 ± 24.1 vs. 2.12 ± 1.69 (P = 0.04)]. On the other hand, expressions of TNF-α, and MMP-9 in both aortic aneurysmal wall and retroperitoneal periaortic fat among group P were significantly decreased. [(Aortic aneurysmal wall; TNF-α; 0.45 ± 0.15 vs. 5.18 ± 3.49 (P = 0.02), MMP-9; 39.6 ± 69.0 vs. 721 ± 741 (P = 0.04)], [retroperitoneal periaortic fat; TNF-α; 1.14 ± 0.36 vs. 26.4 ± 25.0 (P = 0.048), MMP-9; 0.18 ± 0.21 vs. 50.0 ± 41.8 (P = 0.047)]. CONCLUSION: These data may indicate that PPAR-γ agonist become the way for preventing or delaying aortic aneurysm progression in patients. More studies will be needed to clarify this drug effects in detail.

Development of small diameter nanofiber tissue engineered arterial grafts.

The surgical repair of heart and vascular disease often requires implanting synthetic grafts. While synthetic grafts have been successfully used for medium-to-large sized arteries, applications for small diameter arteries (<6 mm) is limited due to high rates of occlusion by thrombosis. Our objective was to develop a tissue engineered vascular graft (TEVG) for small diameter arteries. TEVGs composed of polylactic acid nanofibers with inner luminal diameter between 0.5 and 0.6 mm were surgically implanted as infra-renal aortic interposition conduits in 25 female C17SCID/bg mice. Twelve mice were given sham operations. Survival of mice with TEVG grafts was 91.6% at 12 months post-implantation (sham group: 83.3%). No instances of graft stenosis or aneurysmal dilatation were observed over 12 months post-implantation, assessed by Doppler ultrasound and microCT. Histologic analysis of explanted TEVG grafts showed presence of CD31-positive endothelial monolayer and F4/80-positive macrophages after 4, 8, and 12 months in vivo. Cells positive for α-smooth muscle actin were observed within TEVG, demonstrating presence of smooth muscle cells (SMCs). Neo-extracellular matrix consisting mostly of collagen types I and III were observed at 12 months post-implantation. PCR analysis supports histological observations. TEVG group showed significant increases in expressions of SMC marker, collagen-I and III, matrix metalloproteinases-2 and 9, and itgam (a macrophage marker), when compared to sham group. Overall, patency rates were excellent at 12 months after implantation, as structural integrity of these TEVG. Tissue analysis also demonstrated vessel remodeling by autologous cell.

Efficient intratracheal delivery of airway epithelial cells in mice and pigs.

Cellular therapy via direct intratracheal delivery has gained interest as a novel therapeutic strategy for treating various pulmonary diseases including cystic fibrosis lung disease. However, concerns such as insufficient cell engraftment in lungs and lack of large animal model data remain to be resolved. This study aimed to establish a simple method for evaluating cell retention in lungs and to develop reproducible approaches for efficient cell delivery into mouse and pig lungs. Human lung epithelial cells including normal human bronchial/tracheal epithelial (NHBE) cells and human lung epithelial cell line A549 were infected with pSicoR-green fluorescent protein (GFP) lentivirus. GFP-labeled NHBE cells were delivered via a modified intratracheal cell instillation method into the lungs of C57BL/6J mice. Two days following cell delivery, GFP ELISA-based assay revealed a substantial cell-retention efficiency (10.48 ± 2.86%, n = 7) in mouse lungs preinjured with 2% polidocanol. When GFP-labeled A549 cells were transplanted into Yorkshire pig lungs with a tracheal intubation fiberscope, a robust initial cell attachment (22.32% efficiency) was observed at 24 h. In addition, a lentiviral vector was developed to induce the overexpression and apical localization of cystic fibrosis transmembrane conductance regulator (CFTR)-GFP fusion proteins in NHBE cells as a means of ex vivo CFTR gene transfer in nonprogenitor (relatively differentiated) lung epithelial cells. These results have demonstrated the convenience and efficiency of direct delivery of exogenous epithelial cells to lungs in mouse and pig models and provided important background for future preclinical evaluation of intratracheal cell transplantation to treat lung diseases.

Comparison of the biological equivalence of two methods for isolating bone marrow mononuclear cells for fabricating tissue-engineered vascular grafts.

Our approach for fabricating tissue-engineered vascular grafts (TEVG), applied in the surgical management of congenital heart disease, is accomplished by seeding isolated bone marrow-derived mononuclear cells (BM-MNCs) onto biodegradable scaffolds. The current method used for isolation of BM-MNCs is density centrifugation in Ficoll. This is a time-consuming, labor-intensive, and operator-dependent method. We previously demonstrated that a simpler, faster, and operator-independent method for isolating BM-MNCs using a filter elution technique was feasible. In this study, we compare the use of each technique to determine if the BM-MNCs isolated by the filtration elution method are biologically equivalent to BM-MNCs isolated using density centrifugation. Scaffolds were constructed from a nonwoven poly(glycolic acid) fiber mesh coated with 50:50 poly(l-lactide-co-ɛ-caprolactone) sealant. BM-MNCs were isolated from the bone marrow of syngeneic C57BL/6 mice by either density centrifugation with Ficoll or filtration (Ficoll vs. Filter), then statically seeded onto scaffolds, and incubated overnight. The TEVG were implanted in 10-week-old C57BL/6 mice (n=23 for each group) as inferior vena cava interposition grafts and explanted at 14 days for analysis. At 14 days after implantation, there were no significant differences in graft patency between groups (Ficoll: 87% vs. Filter: 78%, p=0.45). Morphometric analysis by hematoxylin and eosin staining showed no difference of graft luminal diameter or neointimal thickness between groups (luminal diameter, Ficoll: 620.3±82.9 µm vs. Filter: 633.3±131.0 µm, p=0.72; neointimal thickness, Ficoll: 37.9±7.8 µm vs. Filter: 37.9±11.2 µm, p=0.99). Histologic examination demonstrated similar degrees of cellular infiltration and extracellular matrix deposition, and endothelial cell coverage on the luminal surface, in either group. Macrophage infiltration showed no difference in the number of F4/80-positive cells or macrophage phenotypes between the two experimental groups (Ficoll: 2041±1048 cells/mm(2) vs. Filter: 1887±907.7 cells/mm(2), p=0.18). We confirmed the biological equivalence of BM-MNCs, isolated using either density centrifugation or filtration, for making TEVG.

Evaluation of remodeling process in small-diameter cell-free tissue-engineered arterial graft.

OBJECTIVE: Autologous grafts are used to repair atherosclerotic cardiovascular diseases; however, many patients lack suitable donor graft tissue. Recently, tissue engineering techniques have emerged to make biologically active blood vessels. We applied this technique to produce arterial grafts using established biodegradable materials without cell seeding. The grafts were evaluated in vivo for vessel remodeling during 12 months. METHODS: Poly(L-lactide-co-ε-caprolactone) scaffolds reinforced by poly(lactic acid) (PLA) fiber were prepared as arterial grafts. Twenty-eight cell-free grafts were implanted as infrarenal aortic interposition grafts in 8-week-old female SCID/Bg mice. Serial ultrasound and micro computed tomography angiography were used to monitor grafts after implantation. Five grafts were harvested for histologic assessments and reverse transcription-quantitative polymerase chain reaction analysis at time points ranging from 4 months to 1 year after implantation. RESULTS: Micro computed tomography indicated that most implanted mice displayed aneurysmal changes (three of five mice at 4 months, four of five mice at 8 months, and two of five mice at 12 months). Histologic assessments demonstrated extensive tissue remodeling leading to the development of well-circumscribed neovessels with an endothelial inner lining, a neointima containing smooth muscle cells and elastin, and a collagen-rich extracellular matrix. There were a few observed calcified deposits, located around residual PLA fibers at 12 months after implantation. Macrophage infiltration into the scaffold, as evaluated by F4/80 immunohistochemical staining, remained after 12 months and was focused mostly around residual PLA fibers. Reverse transcription-quantitative polymerase chain reaction analysis revealed that gene expression of Itgam, a marker for macrophages, and of matrix metalloproteinase 9 was higher than in native aorta during the course of 12 months, indicating prolonged inflammation (Itgam at 8 months: 11.75 ± 0.99 vs native aorta, P < .01; matrix metalloproteinase 9 at 4 months: 4.35 ± 3.05 vs native aorta, P < .05). CONCLUSIONS: In this study, we demonstrated well-organized neotissue of cell-free biodegradable arterial grafts. Although most grafts experienced aneurysmal change, such findings provide insight into the process of tissue-engineered vascular graft remodeling and should allow informed rational design of the next generation of arterial grafts.

Comparison of a closed system to a standard open technique for preparing tissue-engineered vascular grafts.

We developed a prototype for a closed apparatus for assembling tissue-engineered vascular grafts (TEVGs) with the goal of creating a simple operator-independent method for making TEVGs to optimize safety and enable widespread application of this technology. The TEVG is made by seeding autologous bone marrow-derived mononuclear cells onto a biodegradable tubular scaffold and is the first man-made vascular graft to be successfully used in humans. A critical barrier, which has prevented the widespread clinical adoption of the TEVG, is that cell isolation, scaffold seeding, and incubation are performed using an open method. To reduce the risk of contamination, the TEVG is assembled in a clean room. Clean rooms are expensive to build, complex to operate, and are not available in most hospitals. In this investigation, we used an ovine model to compare the safety and efficacy of TEVGs created using either a standard density centrifugation-based open method or the new filter-based closed system. We demonstrated no graft-related complications and maintenance of growth capacity in TEVGs created using the closed apparatus. In addition, the use of the closed system reduced the amount of time needed to assemble the TEVG by ∼ 50%. Adaptation of similar methodologies may facilitate the safe translation and the widespread use of other tissue engineering technologies.

Well-organized neointima of large-pore poly(L-lactic acid) vascular graft coated with poly(L-lactic-co-ε-caprolactone) prevents calcific deposition compared to small-pore electrospun poly(L-lactic acid) graft in a mouse aortic implantation model.

OBJECTIVE: Tissue engineering techniques have emerged that allow bioresorbable grafts to be implanted that restore function and transform into biologically active arteries. However, these implants are susceptible to calcification during the remodeling process. The objective of this study was to evaluate the role of pore size of bioabsorbable grafts in the development of calcification. METHODS: Two types of grafts were prepared: a large-pore graft constructed of poly(L-lactic acid) (PLA) fibers coated with poly(L-lactide-co-ε-caprolactone) (PLCL) (PLA-PLCL), and a small-pore graft made of electrospun PLA nanofibers (PLA-nano). Twenty-eight PLA-PLCL grafts and twenty-five PLA-nano grafts were implanted as infra-renal aortic interposition conduits in 8-week-old female SCID/Bg mice, and followed for 12 months after implantation. RESULTS: Large-pore PLA-PLCL grafts induced a well-organized neointima after 12 months, and Alizarin Red S staining showed neointimal calcification only in the thin neointima of small-pore PLA-nano grafts. At 12 months, macrophage infiltration, evaluated by F4/80 staining, was observed in the thin neointima of the PLA-nano graft, and there were few vascular smooth muscle cells (VSMCs) in this layer. On the other hand, the neointima of the PLA-PLCL graft was composed of abundant VSMCs, and a lower density of macrophages (F4/80 positive cells, PLA-PLCL; 68.1 ± 41.4/mm(2) vs PLA-nano; 188.3 ± 41.9/mm(2), p = 0.007). The VSMCs of PLA-PLCL graft expressed transcription factors of both osteoblasts and osteoclasts. CONCLUSION: These findings demonstrate that in mouse arterial circulation, large-pore PLA-PLCL grafts created a well-organized neointima and prevented calcific deposition compared to small-pore, electrospun PLA-nano grafts.

Targeted imaging of matrix metalloproteinase activity in the evaluation of remodeling tissue-engineered vascular grafts implanted in a growing lamb model.

OBJECTIVES: The clinical translation of tissue-engineered vascular grafts has been demonstrated in children. The remodeling of biodegradable, cell-seeded scaffolds to functional neovessels has been partially attributed to matrix metalloproteinases. Noninvasive assessment of matrix metalloproteinase activity can indicate graft remodeling and elucidate the progression of neovessel formation. Therefore, matrix metalloproteinase activity was evaluated in grafts implanted in lambs using in vivo and ex vivo hybrid imaging. Graft growth and remodeling was quantified using in vivo x-ray computed tomography angiography. METHODS: Cell-seeded and unseeded scaffolds were implanted in 5 lambs as inferior vena cava interposition grafts. At 2 and 6 months after implantation, in vivo angiography was used to assess graft morphology. In vivo and ex vivo single photon emission tomography/computed tomography imaging was performed with a radiolabeled compound targeting matrix metalloproteinase activity at 6 months. The neotissue was examined at 6 months using qualitative histologic and immunohistochemical staining and quantitative biochemical analysis. RESULTS: The seeded grafts demonstrated significant luminal and longitudinal growth from 2 to 6 months. In vivo imaging revealed subjectively greater matrix metalloproteinase activity in grafts versus native tissue. Ex vivo imaging confirmed a quantitative increase in matrix metalloproteinase activity and demonstrated greater activity in unseeded versus seeded grafts. The glycosaminoglycan content was increased in seeded grafts versus unseeded grafts, without significant differences in collagen content. CONCLUSIONS: Matrix metalloproteinase activity remained elevated in tissue-engineered grafts 6 months after implantation and could indicate remodeling. Optimization of in vivo imaging to noninvasively evaluate matrix metalloproteinase activity could assist in the serial assessment of vascular graft remodeling.

In vivo applications of electrospun tissue-engineered vascular grafts: a review.

There is great clinical demand for synthetic vascular grafts with improved long-term efficacy. The ideal vascular conduit is easily implanted, nonthrombogenic, biocompatible, resists aneurysmal dilatation, and ultimately degrades or is assimilated as the patient remodels the graft into tissue resembling native vessel. The field of vascular tissue engineering offers an opportunity to design the ideal synthetic graft, and researchers have evaluated a variety of methods and materials for use in graft construction. Electrospinning is one method that has received considerable attention within tissue engineering for constructing so-called tissue scaffolds. Tissue scaffolds are temporary, porous structures which are commonly composed of bioresorbable polymers that promote native tissue ingrowth and have degradation kinetics compatible with a patient's rate of extracellular matrix production in order to successfully transit from synthetic conduits into neovessels. In this review, we summarize the history of tissue-engineered vascular grafts (TEVG), focusing on scaffolds generated by the electrospinning process, and discuss in vivo applications. We review the materials commonly employed in this approach and the preliminary results after implantation in animal models in order to gauge clinical viability of the electrospinning process for TEVG construction. Scientists have studied electrospinning technology for decades, but only recently has it been orthotopically evaluated in animal models such as TEVG. Advantages of electrospun TEVG include ease of construction, favorable cellular interactions, control of scaffold features such as fiber diameter and pore size, and the ability to choose from a variety of polymers possessing a range of mechanical and chemical properties and degradation kinetics. Given its advantages, electrospinning technology merits investigation for use in TEVG, but an emphasis on long-term in vivo evaluation is required before its role in clinical vascular tissue engineering can be realized.

Vessel bioengineering.

The development of vascular bioengineering has led to a variety of novel treatment strategies for patients with cardiovascular disease. Notably, combining biodegradable scaffolds with autologous cell seeding to create tissue-engineered vascular grafts (TEVG) allows for in situ formation of organized neovascular tissue and we have demonstrated the clinical viability of this technique in patients with congenital heart defects. The role of the scaffold is to provide a temporary 3-dimensional structure for cells, but applying TEVG strategy to the arterial system requires scaffolds that can also endure arterial pressure. Both biodegradable synthetic polymers and extracellular matrix-based natural materials can be used to generate arterial scaffolds that satisfy these requirements. Furthermore, the role of specific cell types in tissue remodeling is crucial and as a result many different cell sources, from matured somatic cells to stem cells, are now used in a variety of arterial TEVG techniques. However, despite great progress in the field over the past decade, clinical effectiveness of small-diameter arterial TEVG (<6mm) has remained elusive. To achieve successful translation of this complex multidisciplinary technology to the clinic, active participation of biologists, engineers, and clinicians is required.