Hot and Cold: Photochemical Weathering Mediates Oil Properties and Fate Differently Depending on Seawater Temperature.

Photochemical weathering transforms petroleum oil and changes its bulk physical properties, as well as its partitioning into seawater. This transformation process is likely to occur in a cold water marine oil spill, but little is known about the behavior of photochemically weathered oil in cold water. We quantified the effect of photochemical weathering on oil properties and partitioning across temperatures. Compared to weathering in the dark, photochemical weathering increases oil viscosity and water-soluble content, decreases oil-seawater interfacial tension, and slightly increases density. Many of these photochemical changes are much larger than changes caused by evaporative weathering. Further, the viscosity and water-soluble content of photochemically weathered oil are more temperature-sensitive compared to evaporatively weathered oil, which changes the importance of key fate processes in warm versus cold environments. Compared to at 30 °C, photochemically weathered oil at 5 °C would have a 16× higher viscosity and a 7× lower water-soluble content, resulting in lower entrainment and dissolution. Collectively, the physical properties and thus fate of photochemically weathered oil in a cold water spill may be substantially different from those in a warm water spill. These differences could affect the choice of oil spill response options in cold, high-light environments.

Advances in Chemical Analysis of Oil Spills Since the Deepwater Horizon Disaster.

Analytical techniques for chemical analysis of oil, oil photochemical and biological transformation products, and dispersants and their biodegradation products benefited significantly from research following the 2010 Deepwater Horizon (DWH) disaster. Crude oil and weathered-oil matrix reference materials were developed based on the Macondo well oil and characterized for polycyclic aromatic hydrocarbons, hopanes, and steranes for use to assure and improve the quality of analytical measurements in oil spill research. Advanced gas chromatography (GC) techniques such as comprehensive two-dimensional GC (GC × GC), pyrolysis GC with mass spectrometry (MS), and GC with tandem MS (GC-MS/MS) provide a greater understanding at the molecular level of composition and complexity of oil and weathering changes. The capabilities of high-resolution MS (HRMS) were utilized to extend the analytical characterization window beyond conventional GC-based methods to include polar and high molecular mass components (>400 Da) and to provide new opportunities for discovery, characterization, and investigation of photooxidation and biotransformation products. Novel separation approaches to reduce the complexity of the oil and weathered oil prior to high-resolution MS and advanced fluorescence spectrometry have increased the information available on spilled oil and transformation products. HRMS methods were developed to achieve the required precision and sensitivity for detection of dispersants and to provide molecular-level characterization of the complex surfactants. Overall, research funding following the DWH oil spill significantly advanced and expanded the use of analytical techniques for chemical analysis to support petroleum and dispersant characterization and investigations of fate and effects of not only the DWH oil spill but future spills.

Complex Mixture Analysis of Emerging Contaminants Generated from Coal Tar- and Petroleum-Derived Pavement Sealants: Molecular Compositions and Correlations with Toxicity Revealed by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry.

Pavement sealants are of environmental concern because of their complex petroleum-based chemistry and potential toxicity. Specifically, coal tar-derived sealants contain high concentrations of toxic/carcinogenic polycyclic aromatic hydrocarbons (PAHs) that, when weathered, can be transferred into the surrounding environment. Previous studies have demonstrated the effects of coal tar sealants on PAH concentration in nearby waterways and their harmful effects in aquatic ecosystems. Here, we investigate and compare the molecular composition of two different pavement sealants, petroleum asphalt- and coal tar-derived, and their photoproducts, by positive-ion (+) atmospheric pressure photoionization (APPI) and negative-ion (-) electrospray ionization (ESI) coupled with ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry to address species (high-boiling and/or high oxygen content) that lie outside the analytical window of other techniques due to ultra-high molecular complexity. In addition, we evaluate the toxicity of the water-soluble photoproducts by use of Microtox bioassay. The results demonstrate that the coal tar sealant contains higher amounts of PAHs and produces abundant water-soluble compounds, relative to unweathered materials, with a high abundance of PAH-like molecules of high toxicity. By comparison, the asphalt sealant produces fewer toxic water-soluble species, with molecular compositions that are consistent with natural dissolved organic matter. These results capture the mass, chemical diversity, toxicity, and source/photoproduct relationship of these compositionally complex emerging contaminants from the built environment.

Time-dependent molecular progression and acute toxicity of oil-soluble, interfacially-active, and water-soluble species reveals their rapid formation in the photodegradation of Macondo Well Oil.

Photodegradation is a significant weathering process that transforms spilled oil, yet, the fate, degradation rate, and molecular transformations that occur through photoinduced pathways remain relatively unknown. The molecular complexity combined with the increased polarity of photoproducts challenges conventional analytical techniques. Here, we catalogue the molecular progression of photochemical transformation products of Macondo Well Oil by negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). We track the molecular compositions of oil-soluble, interfacially-active, and water-soluble oil species formed at varying time intervals in photomicrocosm experiments. Short photoirradiation periods (<24 h), not previously reported, are included to reveal rapid photooxidation of native oil components. Surface oil films exposed to solar irradiation were shown to increasingly contribute to the dissolved organic carbon pool as a function of increased irradiation time. FT-ICR MS analysis of acidic species of each fraction identifies tens of thousands of oil-soluble, interfacially-active, and water-soluble phototransformation products, including Ox, NOx, and SOx species. Oil-soluble species incorporate oxygen as a function of irradiation periods. After 96 h of irradiation, ~14 wt% of the photooxidized oil film was interfacially active and contained phototransformed species with up to 12 oxygen atoms per molecule. Water-soluble species correspond to highly oxygenated compounds. Importantly, photochemical oxidation is shown to occur within the first hour. Beyond 24 h, photoproducts remain compositionally similar, highlighting the rapid effect of photodegradation to transform oil species into water-soluble compounds. Molecular fingerprints provided by FT-ICR MS highlight the oxygen dependence on oil/water solubility. Microtox® analysis indicates that the toxicity of water-soluble photoproducts rapidly increases at early irradiation time points (first 24 h) compared to the dark control and reaches a maximum at 6 h of irradiation. Results highlight the temporal, molecular progression of photoproducts as they partition from oil-soluble to oil-soluble interfacially-active, and finally to water-soluble species.

Online Coupling of Liquid Chromatography with Fourier Transform Ion Cyclotron Resonance Mass Spectrometry at 21 T Provides Fast and Unique Insight into Crude Oil Composition.

High magnetic field Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry provides the highest mass resolving power and mass measurement accuracy for detailed characterization of complex chemical mixtures. Here, we report the coupling of online liquid chromatography of complex mixtures with a 21 tesla FT-ICR mass spectrometer. The high magnetic field enables large ion populations to be analyzed for each spectrum for a high dynamic range, with 3.2 million mass resolving power at m/z 400 (6.2 s transient duration) or 1.6 million (3.1 s transient duration) while maintaining high mass accuracy for molecular formula assignment (root-mean-square assignment error < 0.150 ppm). Thousands of unique elemental compositions are assigned per mass spectrum, which can be grouped by the heteroatom class, double bond equivalents (the number of rings and double bonds to carbon), and carbon number. Figures of merit are discussed, as well as characterization of an Arabian heavy vacuum gas oil in terms of the ring number, compound class, double bond equivalents, and ion type. Consideration of elemental composition and retention order provides additional structural information.

Role of Molecular Structure in the Production of Water-Soluble Species by Photo-oxidation of Petroleum.

Asphaltenes are high-boiling and recalcitrant compounds that are generally minor components of crude oil (∼0.1-15.0 wt %) but dominate the composition of heavily weathered spilled petroleum. These solid residues exhibit a high structural complexity, comprised of polycyclic aromatic hydrocarbons (PAHs) that are a mixture of single-core (island) and multicore (archipelago) structural motifs. The mass fraction of each motif is sample-dependent. Thus, knowledge of a potential structural dependence (single- versus multicore) on the production of water-soluble species from asphaltene samples is key to understanding the contribution of photochemically generated dissolved organic matter from oil spills. In this work, asphaltene samples with enriched mass fractions of either island (single-core) or archipelago (multicore) structural motifs are photo-oxidized on artificial seawater by the use of a solar simulator. Molecular characterization of oil- and water-soluble photoproducts, conducted by Fourier transform ion cyclotron resonance mass spectrometry, reveals that island motifs exhibit very limited production of water-soluble species, and their oil-soluble products reflect the molecular composition of the starting material. Conversely, archipelago motifs yield a water-soluble compositional continuum of Ox, SxOy, and NxOy containing hydrocarbons species that exhibit the typical molecular fingerprint of dissolved organic matter (DOM). The lower carbon number and aromaticity of the archipelago-derived asphaltene photoproducts suggest the occurrence of photofragmentation (or photolysis) reactions. To investigate the possibility of the opposite reaction (photopolymerization), the photo-oxidation of small PAHs isolated from a low-boiling petroleum distillation cut was also performed. It yielded water-soluble compounds with carbon number and aromaticity up to 2-fold higher than the starting material, strongly suggesting that polymerization (addition reactions) occurs. Collectively, the results indicate that the presence of archipelago motifs and the occurrence of cracking/polymerization reactions are central in the production of dissolved organic matter from fossil fuels.

Characterization of an Asphalt Binder and Photoproducts by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Abundant Water-Soluble Hydrocarbons.

Road asphalt is comprised of aggregate (rocks) mixed with a binder composed of high-boiling petroleum-derived compounds, which have been thought to be relatively inert (unreactive) and thus leach small amounts of polyaromatic hydrocarbons (PAHs) into water from the built environment. However, recent studies have demonstrated that petroleum readily undergoes photooxidation and generates water-soluble oxygen-containing hydrocarbons. Therefore, here, we investigate the effects of solar irradiation on an asphalt binder. Upon irradiation in a photooxidation microcosm, thin films of the asphalt binder produce abundant oil- and water-soluble oxygenated hydrocarbons, which we hypothesize are also leached from roads and highways through photooxidation reactions. Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) enables extensive compositional characterization of the virgin asphalt binder, irradiated asphalt binder, and the water-soluble photoproducts. The results reveal the production of water-soluble species that resemble the molecular composition of petroleum-derived dissolved organic matter, including abundant hydrocarbons and S-containing species with up to 18 oxygen atoms. The results also confirm photo-induced oxidation, fragmentation, and potentially polymerization as active processes involved in the production of water-soluble organic pollutants from asphalt.

Combating selective ionization in the high resolution mass spectral characterization of complex mixtures.

Direct "dilute and shoot" mass spectral analysis of complex naturally-occurring mixtures has become the "standard" analysis in environmental and petrochemical science, as well as in many other areas of research. Despite recent advances in ionization methods, that approach still suffers several limitations for the comprehensive characterization of compositionally complex matrices. Foremost, the selective ionization of highly acidic (negative electrospray ionization ((-) ESI)) and/or basic (positive electrospray ionization ((+) ESI)) species limits the detection of weakly acidic/basic species, and similar issues (matrix effects) complicate atmospheric pressure photo-ionization (APPI)/atmospheric pressure chemical ionization (APCI) analyses. Furthermore, given the wide range of chemical functionalities and structural motifs in these compositionally complex mixtures, aggregation can similarly limit the observed species to a small (10-20%) mass fraction of the whole sample. Finally, irrespective of the ionization method, the mass analyzer must be capable of resolving tens-of-thousands of mass spectral peaks and provide the mass accuracy (typically 50-300 ppb mass measurement error) required for elemental composition assignment, and thus is generally limited to high-field Fourier transform ion cyclotron mass spectrometry (FT-ICR MS). Here, we describe three approaches to combat the above issues for (+) ESI, (-) ESI, and (+) APPI FT-ICR MS analysis of petroleum samples. Each approach relies on chromatographic fractionation to help reduce selective ionization discrimination and target either specific chemical functionalities (pyridinic and pyrrolic species (nitrogen) or carboxylic acids (oxygen)) or specific structural motifs (single aromatic core (island) or multi-core aromatics (archipelago)) known to be related to ionization efficiency. Each fractionation method yields a 2-10-fold increase in the compositional coverage, exposes species that are undetectable using direct "dilute and shoot" analysis, and provides coarse selectivity in chemical functionalities that can both increase the assignment confidence and optimize ionization conditions to maximize compositional coverage.

Molecular-Level Composition and Acute Toxicity of Photosolubilized Petrogenic Carbon.

To examine the molecular-level composition and acute toxicity per unit carbon of the petroleum-derived dissolved organic matter (DOMHC) produced via photo-oxidation, heavy and light oils were irradiated over seawater with simulated sunlight. Increases in dissolved organic carbon concentrations as a function of time were associated with changes in the DOMHC composition and acute toxicity per unit carbon. Parallel factor analysis showed that the fluorescent dissolved organic matter (FDOM) composition produced from the heavy oil became more blue-shifted over time, while the light oil produced a mixture of blue- and red-shifted components similar to FDOM signatures. Ultrahigh-resolution mass spectrometry reveals that the composition of the DOMHC produced from both heavy and light oils was initially relatively reduced, with low O/C. With time, the composition of the DOMHC produced from the heavy oil shifted to unsaturated, high-oxygen compounds, while that produced from the light oil comprised a range of high O/C aliphatic, unsaturated, and aromatic compounds. Microtox assays suggest that the DOMHC initially produced is the most toxic (62% inhibition); however, after 24 h, a rapid decrease in toxicity decreased linearly to 0% inhibition for the heavy DOMHC and 12% inhibition for the light DOMHC at extended exposure periods.

Molecular-Level Characterization of Oil-Soluble Ketone/Aldehyde Photo-Oxidation Products by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Similarity Between Microcosm and Field Samples.

We present a solid-phase extraction method followed by derivatization with a charged tag to characterize ketone/aldehyde-containing functionalities (proposed photo-oxidation transformation products) in weathered petroleum by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). A photo-oxidation-only microcosm mimics solar irradiation of crude oil in the environment after an oil spill. A biodegradation-only microcosm enables independent determination as to which of the two weathering processes contributes to the formation of oil-soluble ketone/aldehyde species. Results confirm that photo-oxidation produces ketones/aldehydes in crude oil when exposed to solar radiation in laboratory experiments, whereas biodegraded oil samples do not produce ketone/aldehyde compounds. Field samples collected after different time periods and locations after the Deepwater Horizon oil spill are also shown to contain ketones/aldehydes, and comparison of field and photo-oxidation-only microcosm transformation products reveal remarkable similarity. These results indicate that the photo-oxidation microcosm comprehensively represents ketone/aldehyde-formation products in the field, whereas the biodegradation microcosm does not. Solid-phase extraction coupled with derivatization leads to selective identification of ketone/aldehyde species by MS. Although improved dynamic range and slightly reduced mass spectral complexity is achieved by separation/derivatization, comprehensive molecular characterization still requires mass resolving power and mass accuracy provided by FT-ICR MS.

Partial Photochemical Oxidation Was a Dominant Fate of Deepwater Horizon Surface Oil.

Following the Deepwater Horizon (DWH) blowout in 2010, oil floated on the Gulf of Mexico for over 100 days. In the aftermath of the blowout, substantial accumulation of partially oxidized surface oil was reported, but the pathways that formed these oxidized residues are poorly constrained. Here we provide five quantitative lines of evidence demonstrating that oxidation by sunlight largely accounts for the partially oxidized surface oil. First, residence time on the sunlit sea surface, where photochemical reactions occur, was the strongest predictor of partial oxidation. Second, two-thirds of the partial oxidation from 2010 to 2016 occurred in less than 10 days on the sunlit sea surface, prior to coastal deposition. Third, multiple diagnostic biodegradation indices, including octadecane to phytane, suggest that partial oxidation of oil on the sunlit sea surface was largely driven by an abiotic process. Fourth, in the laboratory, the dominant photochemical oxidation pathway of DWH oil was partial oxidation to oxygenated residues rather than complete oxidation to CO2. Fifth, estimates of partial photo-oxidation calculated with photochemical rate modeling overlap with observed oxidation. We suggest that photo-oxidation of surface oil has fundamental implications for the response approach, damage assessment, and ecosystem restoration in the aftermath of an oil spill, and that oil fate models for the DWH spill should be modified to accurately reflect the role of sunlight.

21 Tesla FT-ICR Mass Spectrometer for Ultrahigh-Resolution Analysis of Complex Organic Mixtures.

We describe complex organic mixture analysis by 21 tesla (T) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Ultrahigh mass-resolving power (m/Δm50% > 2 700 000 at m/z 400) and mass accuracy (80 ppb rms) enable resolution and confident identification of tens of thousands of unique elemental compositions. We demonstrate 2.2-fold higher mass-resolving power, 2.6-fold better mass measurement accuracy, and 1.3-fold more assigned molecular formulas compared to our custom-built, state-of-the-art 9.4 T FT-ICR mass spectrometer for petroleum and dissolved organic matter (DOM) analyses. Analysis of a heavy petroleum distillate exemplifies the need for ultrahigh-performance mass spectrometry (49 040 assigned molecular formulas for 21 T versus 29 012 for 9.4 T) and extends the identification of previously unresolved Oo, SsOo, and NOo classes. Mass selective ion accumulation (20 Thompson isolation) of an asphalt volcano sample yields 462 resolved mass spectral peaks at m/z 677 and reveals previously unresolved CcHhNnOoSs mass differences at high mass (m/z > 600). Similar performance gains are realized in the analysis of dissolved organic matter, where doubly charged Oo species are resolved from singly charged SOo species, which requires a mass-resolving power greater than 1 400 000 (at m/z 600). This direct comparison reveals the continued need for higher mass-resolving power and better mass accuracy for comprehensive molecular characterization of the most complex organic mixtures.

126 264 Assigned Chemical Formulas from an Atmospheric Pressure Photoionization 9.4 T Fourier Transform Positive Ion Cyclotron Resonance Mass Spectrum.

Here, we present atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance (FTICR) mass analysis of a volcanic asphalt sample by acquiring data for 20 Da wide mass segments across a 1000 Da range, stitched into a single composite mass spectrum, and compare to a broad-band mass spectrum for the same sample. The segmented spectrum contained 170 000 peaks with magnitude greater than 6σ of the root-mean-square (rms) baseline noise, for which 126 264 unique elemental compositions could be assigned. Approximately two-thirds of those compositions represent monoisotopic (i.e., chemically different) species. That complexity is higher than that for any previously reported mass spectrum and almost 3 times greater than that obtained from the corresponding broad-band spectrum (59 015). For the segmented mass spectrum, the signal-to-noise ratio (S/N) was significantly higher throughout the spectrum, but especially at the lower and upper ends of mass distribution relative to that of the near-Gaussian broad-band mass distribution. Despite this S/N improvement, mass measurement accuracy was noticeably improved only at lower masses. The increased S/N did, however, yield a higher number of peaks and higher dynamic range throughout the entire segmented spectrum relative to the conventional broad-band spectrum. The additional assigned peaks include higher heteroatom species, as well as additional radicals and isotopologues. Segmenting can require a significant investment in data acquisition and analysis time over broad-band spectroscopy (∼1775% in this case) making it best suited for targeted analysis and/or when complete compositional coverage is important. Finally, the present segmented spectrum contains, to our knowledge, more assigned peaks than any spectrum of any kind (e.g., UV-vis, infrared, microwave, magnetic resonance, etc.).

4 Years after the Deepwater Horizon Spill: Molecular Transformation of Macondo Well Oil in Louisiana Salt Marsh Sediments Revealed by FT-ICR Mass Spectrometry.

Gulf of Mexico saltmarsh sediments were heavily impacted by Macondo well oil (MWO) released from the 2010 Deepwater Horizon (DWH) oil spill. Detailed molecular-level characterization of sediment extracts collected over 48 months post-spill highlights the chemical complexity of highly polar, oxygen-containing compounds that remain environmentally persistent. Electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS), combined with chromatographic prefractionation, correlates bulk chemical properties to elemental compositions of oil-transformation products as a function of time. Carboxylic acid incorporation into parent MWO hydrocarbons detected in sediment extracts (corrected for mass loss relative to C30 hopane) proceeds with an increase of ∼3-fold in O2 species after 9 months to a maximum of a ∼5.5-fold increase after 36 months, compared to the parent MWO. More importantly, higher-order oxygenated compounds (O4-O6) not detected in the parent MWO increase in relative abundance with time as lower-order oxygenated species are transformed into highly polar, oxygen-containing compounds (Ox, where x > 3). Here, we present the first molecular-level characterization of temporal compositional changes that occur in Deepwater Horizon derived oil contamination deposited in a saltmarsh ecosystem from 9 to 48 months post-spill and identify highly oxidized Macondo well oil compounds that are not detectable by routine gas-chromatography-based techniques.

Gas Chromatography/Atmospheric Pressure Chemical Ionization Tandem Mass Spectrometry for Fingerprinting the Macondo Oil Spill.

We report the first application of a new mass spectrometry technique (gas chromatography combined to atmospheric pressure chemical ionization tandem mass spectrometry, GC/APCI-MS/MS) for fingerprinting a crude oil and environmental samples from the largest accidental marine oil spill in history (the Macondo oil spill, the Gulf of Mexico, 2010). The fingerprinting of the oil spill is based on a trace analysis of petroleum biomarkers (steranes, diasteranes, and pentacyclic triterpanes) naturally occurring in crude oil. GC/APCI enables soft ionization of petroleum compounds that form abundant molecular ions without (or little) fragmentation. The ability to operate the instrument simultaneously in several tandem mass spectrometry (MS/MS) modes (e.g., full scan, product ion scan, reaction monitoring) significantly improves structural information content and sensitivity of analysis. For fingerprinting the oil spill, we constructed diagrams and conducted correlation studies that measure the similarity between environmental samples and enable us to differentiate the Macondo oil spill from other sources.

High field electron paramagnetic resonance characterization of electronic and structural environments for paramagnetic metal ions and organic free radicals in Deepwater Horizon oil spill tar balls.

In the first use of high-field electron paramagnetic resonance (EPR) spectroscopy to characterize paramagnetic metal-organic and free radical species from tar balls and weathered crude oil samples from the Gulf of Mexico (collected after the Deepwater Horizon oil spill) and an asphalt volcano sample collected off the coast of Santa Barbara, CA, we are able to identify for the first time the various paramagnetic species present in the native state of these samples and understand their molecular structures and bonding. The two tar ball and one asphalt volcano samples contain three distinct paramagnetic species: (i) an organic free radical, (ii) a [VO](2+) containing porphyrin, and (iii) a Mn(2+) containing complex. The organic free radical was found to have a disc-shaped or flat structure, based on its axially symmetric spectrum. The characteristic spectral features of the vanadyl species closely resemble those of pure vanadyl porphyrin; hence, its nuclear framework around the vanadyl ion must be similar to that of vanadyl octaethyl porphyrin (VOOEP). The Mn(2+) ion, essentially undetected by low-field EPR, yields a high-field EPR spectrum with well-resolved hyperfine features devoid of zero-field splitting, characteristic of tetrahedral or octahedral Mn-O bonding. Although the lower-field EPR signals from the organic free radicals in fossil fuel samples have been investigated over the last 5 decades, the observed signal was featureless. In contrast, high-field EPR (up to 240 GHz) reveals that the species is a disc-shaped hydrocarbon molecule in which the unpaired electron is extensively delocalized. We envisage that the measured g-value components will serve as a sensitive basis for electronic structure calculations. High-field electron nuclear double resonance experiments should provide an accurate picture of the spin density distribution for both the vanadyl-porphyrin and Mn(2+) complexes, as well as the organic free radical, and will be the focus of follow-up studies.