In-House 3D Printed Positioning and Cutting Guide System for Mandibular Reconstruction. Protocol and case report.

Maxillofacial surgery planning has been improved by technological advances in 3D printing. The use of customized cutting and positioning guides allows intraoperative reproduction of pre-planned osteotomy cuts, resulting in increased surgical accuracy, reduced surgical time and improved esthetic and functional outcomes. Our paper presents a new method for creating and printing in-house cutting and positioning guides. A computer program (Brainlab iPlan) was used to segment the mandible for three-dimensional planning from imported conventional computed tomography (CT) scans. The virtual model of the mandible was printed on a stereolithography (SLA) 3D printer and a reconstruction plate was adapted to the printed model. The surface of the model and the screw-retained plate was scanned using a structured light surface 3D scanner (Artec Eva). The obtained scan of the jaw and plate in position was processed and transformed into an STL file. Free software (Autodesk Meshmixer) superimposes the initial jaw on the scanned jaw with the plate, designing a customized hybrid cutting guide that allows accurate intraoperative positioning, knowing the exact position of the reconstruction plate screws in the jaw. The total design, fabrication and 3D printing time for the in-house hybrid guide was 595 min. The average total printing cost was EUR 16. We found the technique to be simple and repeatable. We present and describe here a novel and simple technique for in-house 3D printed positioning and cutting guide system which can be applied to overall maxillofacial area. In cases of mandibular reconstruction, this protocol guarantees an adequate esthetic and functional result. Key words:Oral cancer, 3D surgery, CAD/CAM, personalized medicine, surgical guides, in house.

Microtia Ear Reconstruction with Patient-Specific 3D Models-A Segmentation Protocol.

(1) Background: In recent years, three-dimensional (3D) templates have replaced traditional two-dimensional (2D) templates as visual guides during intra-operative carving of the autogenous cartilage framework in microtia reconstruction. This study aims to introduce a protocol of the fabrication of patient-specific, 3D printed and sterilizable auricular models for autogenous auricular reconstruction. (2) Methods: The patient's unaffected ear was captured with a high-resolution surface 3D scan (Artec Eva) and post-processed in order to obtain a clean surface model (STL format). In the next step, the ear was digitally mirrored, segmented and separated into its component auricle parts for reconstruction. It was disassembled into helix, antihelix, tragus and base and a physical model was 3D printed for each part. Following this segmentation, the cartilage was carved in the operating room, based on the models. (3) Results: This segmentation technique facilitates the modeling and carving of the scaffold, with adequate height, depth, width and thickness. This reduces both the surgical time and the amount of costal cartilage used. (4) Conclusions: This segmentation technique uses surface scanning and 3D printing to produce sterilizable and patient-specific 3D templates.

Ameloblastic fibroma: a report of 4 clinical cases and review of the literature / Fibroma ameloblástico: reporte de 4 casos clínicos y revisión de la literatura

Introduction: Ameloblastic fibroma is a rare benign mixed odontogenic tumor that usually presents as a painless swelling in young patients. In this article we performed a literature review and present our experience in the management of fibroblastic ameloblastoma in 4 cases. Material and methods: We performed a review of cases published in the literature in PubMed between 2015 and 2022. Regarding our experience, research in the Anatomical Pathology department was done to find cases of ameloblastic fibroma that had been histologically confirmed. Results: The search rendered 29 results, of which only 9 were selected. All articles were single case reports, and most of them were located in the mandible (77,7 %). Most patients underwent enucleation and curettage, and no recurrence were reported by any of the authors. We found 4 cases operated in our department in the last 15 years. Two lesions were located in the maxilla and 2 in the mandible. In all cases, enucleation and curettage was performed, including extraction of the teeth involved, with a very favorable evolution and no recurrences. Discussion: Management can be conservative, performing enucleation and curettage with a very favorable evolution. Variable rates of recurrence have been described and a malignant variant has been identified, so long-term follow-up must be done. In the literature we found only single case reports, with most of the cases presenting in the mandible and undergoing conservative treatment with favorable results. In our series we did not observe recurrences, with good bone regeneration and receiving subsequent orthodontic treatment. (AU)

Introducción: El fibroma ameloblástico es un tumor odontogénico mixto benigno y poco frecuente que generalmente se presenta como un abombamiento indoloro en pacientes jóvenes. En este artículo realizamos una revisión de la literatura y presentamos nuestra experiencia en el manejo del ameloblastoma fibroblástico en 4 casos. Material y métodos: Realizamos una revisión de los casos publicados en la literatura en Pub-Med entre 2015 y 2022. En cuanto a nuestra experiencia, se realizó una búsqueda en el departamento de Anatomía Patológica de los casos de fibroma ameloblástico confirmados histológicamente. Resultados: La búsqueda arrojó 29 resultados, de los cuales solo 9 fueron seleccionados. Todos los artículos fueron reportes de casos únicos, y la mayoría de ellos se localizaron en la mandíbula (77,7 %). La mayoría de los pacientes se sometieron a enucleación y curetaje, y ninguno de los autores informó de recurrencia. Encontramos 4 casos operados en nuestro departamento en los últimos 15 años. Dos lesiones se localizaron en el maxilar y dos en la mandíbula. En todos los casos se realizó enucleación y curetaje, incluyendo exodoncia de los dientes afectados, con evolución muy favorable y sin recidivas. Discusión: El manejo puede ser conservador, realizándose enucleación y curetaje con una evolución muy favorable. Se han descrito tasas variables de recurrencia y se ha identificado una variante maligna, por lo que se debe realizar un seguimiento a largo plazo. En la literatura encontramos solo informes de casos únicos, la mayoría de los casos se presentaron en la mandíbula y se sometieron a un tratamiento conservador con resultados favorables. En nuestra serie no observamos recidivas, con buena regeneración ósea y recibiendo tratamiento de ortodoncia posterior. (AU)

Clinical Outcomes and Cost Analysis of Fibula Free Flaps: A Retrospective Comparison of CAD/CAM versus Conventional Technique.

(1) Background: A decrease in operative time can not only improve patient outcomes through a reduction in the risk of developing complications but can also result in cost savings. The aim of this study is to determine whether there an intraoperative time gain can be achieved by using the preoperative virtual planning of mandibular reconstruction using a free fibula flap compared with freehand plate bending and osteotomies. (2) Methods: A retrospective comparative study was carried out in the Oral and Maxillofacial Department of La Paz University Hospital, Madrid, Spain. The study compared 18 patients in the CAD/CAM group with 19 patients in the conventional freehand group. A comparison was made between the total surgical time, the comorbidities, and the hospital stay. The resource consumption was estimated using a cost analysis. (3) Results: Although CAD/CAM was a statistically more expensive procedure in the perioperative phase, no significant differences were observed in total health care costs between the two groups. There was a non-significant trend towards an increase in complications with conventional reconstruction plates compared to patient-specific plates (PSI). (4) Conclusions: CAD/CAM technology and a 3D printed cutting guide offer a significantly shorter surgical time, which is associated with a reduction in hospital days, PACU days, and complications. The cost of CAD/CAM technology is comparable to that of the conventional freehand technique.

Endoscopic-assisted approach in the treatment of subcondylar fractures: our experience / Abordaje endoscópico en el tratamiento de las fracturas subcondíleas: nuestra experiencia

Introduction: The management of subcondylar fractures has been very controversial in the maxillofacial literature. The open reduction and internal fixation (ORIF) technique has been considered by many authors the gold standard in selected cases. However, with the rise in endoscopic techniques in the craniomaxillofacial area, new boundaries and less invasive techniques are being explored. The endoscopic approach of subcondylar fractures has proved overall good and similar results to open approaches whilst reducing complications such as facial nerve injury. In this article we purpose to describe our experience with the endoscopic approach to subcondylar fractures. Patients and methods: We retrospectively analyzed 11 patients with subcondylar fractures treated at our department via an endoscopic approach. The number and type of plates used in each patient is recorded. Results and complications observed for all patients are described as well as functional outcomes in terms of mouth opening at 1 week, 3 months and 6 months postoperatively. Results: One patient presented with transient damage to the marginal and frontal branches of the facial nerve. 18.2 % of patients had their hardware removed due to pain or infection at the fracture site. No cases of salivary fistula or sialocele were found in this study. Mean mouth opening at one week postoperatively was 31.8 mm which increased to 37.8 mm at 6 months after surgery, meaning an increase of 18.86 % through the follow-up. Also, 18.2 % of patients presented with persistent deviation with mouth opening and one patient presented with postoperative persistent malocclusion that was treated with intermaxillary fixation and elastics. (AU)

Introducción: El manejo de las fracturas subcondíleas ha sido muy controvertido en la literatura maxilofacial. La técnica de reducción abierta y fijación interna (RAFI) ha sido considerada por muchos autores como el gold standard en casos seleccionados. Sin embargo, con el auge de las técnicas endoscópicas en el área craneomaxilofacial se han puesto en marcha técnicas menos invasivas. El abordaje endoscópico de las fracturas subcondíleas ha demostrado en general buenos resultados, similares a los abordajes abiertos, al mismo tiempo que reduce complicaciones como la lesión del nervio facial. En este artículo nos proponemos describir nuestra experiencia con el abordaje endoscópico de las fracturas subcondíleas. Pacientes y métodos: Analizamos retrospectivamente 11 pacientes con fracturas subcondíleas tratados en nuestro servicio mediante abordaje endoscópico. Se recoge el número y tipo de placas utilizadas en cada paciente. Se describen los resultados y las complicaciones observadas para todos los pacientes, así como los resultados funcionales en términos de apertura oral a la semana, 3 meses y 6 meses después de la intervención. Resultados: Un paciente presentó lesión transitoria en las ramas marginal y frontal del nervio facial. Al 18,2 % de los pacientes se les retiraron las placas, por dolor o infección. En este estudio no se encontraron casos de fístula salival o sialocele. La apertura oral media a la semana del postoperatorio fue de 31,8 mm y aumentó a 37,8 mm a los 6 meses de la cirugía, lo que supuso un aumento del 18,86 % durante el seguimiento. Además, el 18,2 % de los pacientes presentó desviación persistente con la apertura de la boca y un paciente presentó maloclusión persistente postoperatoria que fue tratada con bloqueo intermaxilar y elásticos. (AU)

Tuberculosis oral. Revisión de la literatura. A propósito de un caso / Oral tuberculosis. Review of the literature. A case report

La tuberculosis (TB) es una enfermedad granulomatosa crónica que afecta de forma primordial a los pulmones. La afectación de la cavidad oral es rara, lo que hace que sea infradiagnosticada e infratratada. Dicha afectación puede ser primaria o secundaria, siendo más común la afectación secundaria. Exponemos el caso de un varón fumador de 39 años que presenta una lesión ulcerada en mucosa yugal izquierda de 3 semanas de evolución. Se tomó biopsia con resultado de mucosa escamosa con ulceración e intensa inflamación crónica granulomatosa no necrotizante. Además, presentaba una lesión cavitada a nivel pulmonar. Escribimos este artículo con el fin de determinar la importancia de realizar un buen diagnóstico diferencial de las lesiones ulcerativas de la cavidad oral y recalcar el manejo multidisciplinar de esta patología. (AU)

Tuberculosis (TB) is a chronic granulomatous disease which affects the lungs in majority of the cases. Tuberculosis of the oral cavity may be overlooked in the differential diagnosis of oral lesions and can be misdiagnosed and managed incorrectly. Oral manifestations of TB are seen both in primary and secondary stages of the disease but are most commonly associated with secondary TB. A 39-year-old smoker man with an ulcerative oral lesion came to the emergency room. A partial incisional biopsy was performed, with the result of squamous mucosa with ulceration and intense chronic non-necrotizing granulomatous inflammation. In addition, he had a cavitated lesion in the lung. We write this article in order to determine the importance of making a good differential diagnosis of ulcerative lesions of the oral cavity and emphasize the multidisciplinary management of this pathology. (AU)