Multiresponse optimization of the extrusion process for ready-to-eat snacks from pineapple byproducts and maize flour.

This research aimed to optimize the processing conditions to obtain ready-to-eat extruded snacks with a high fiber content from mixtures of pineapple byproduct powder (PBP) and nixtamalized maize flour (PBP-NMF) or maize flour (PBP-MF). The effects of barrel temperature, feed moisture content, and PBP were evaluated. The increase in barrel temperature has a negative effect on the bulk density, the water absorption index, and the texture in both mixtures (PBP-MF and PBP-NMF) and increases the expansion index and the water solubility index in the mixture with MF. The increase in the feed moisture content increased the bulk density and water absorption index in both mixtures and the texture in the mixtures with MF. The increasing PBP decreases the expansion index and increases the water solubility index in both mixtures. The increase in PBP in the mixtures with MF decreases the water absorption index, texture, and bulk density. From the optimization, four products were obtained, two for the NMF mixture and two for the MF mixtures. The optimal formulations can be considered a good source of total fiber (12.46-12.78 g/100 g) and protein (8.27-8.85 g/100 g) with good acceptance by consumers. PRACTICAL APPLICATION: Pineapple byproducts in combination with nixtamalized and nonnixtamalized maize flour are viable raw materials for the development of ready-to-eat extruded snacks with a high content of dietary fiber and good acceptance by consumers. Due to their characteristic nutritional properties, the consumption of this ready-to-eat snack could present potential benefits for human health.

Effects of COVID-19 on sensory and cognitive perception of mild and severe diagnosed and recovered patients versus healthy consumers.

The objective of this research was to analyze the effects of the SARS-CoV-2 virus on the sensory and cognitive perception of mild and severe COVID-19 diagnosed and recovered consumers versus healthy consumers. Three groups of 50 consumers each (healthy vs. mild and severe COVID-19 diagnosed with 30 days after recovery) were used for the evaluation of instant coffee stimuli in concentrations: 4.40, 2.93, 2.20, 1.76, and 1.47% weight (w)/volume (v) and determine their discriminating power, emotions, and memories. Sensory tests were performed remotely. Results indicated that healthy consumers perceived higher intensities in most of the sensory attributes (with the exception of Burnt-A, Bitter-T, Acid-T, and Astringent-T attributes) compared to consumers who presented mild and severe COVID-19. Therefore, consumers diagnosed with mild and severe COVID-19 had a higher discrimination power in the attributes smell, basic tastes, and flavor. Healthy consumers could only discriminate two attributes that correspond to basic flavors. Consumers with mild and severe COVID-19 diagnosis elicited the highest number of negatives emotions (such as bored, disgusted, worried, guilty, wild, and aggressive) and negative memories (disease, pain, death, hurt, obesity, conflict personal, addiction, stench poverty, and accident) than healthy consumers. It is concluded that there were no significant differences between the consumer panels for the identification of sensory attributes. However, P-Healthy consumers perceived the highest intensities in most sensory attributes compared to those in the PCOVID19-Mild and PCOVID19-Severe panels. Finally, consumers diagnosed with mild or severe COVID-19 used a higher number of emotions and memories than those of the healthy panel. Practical applications: Investigating the effects of COVID-19 on sensory and cognitive perception can be useful for industry and researchers in the sensory field who wish to understand the effects of the disease in order to generate new protocols for the selection and training of people, as well as the possible development and innovation of new products focused on perception of consumers recovered from COVID-19.

Effect of ultrasound on the techno-functional properties of food components/ingredients: A review.

Ultrasound (US) has been used in many food systems and model systems, such as starch, whey protein concentrates and soy, to modify their chemical and techno-functional properties. At present, the use of ultrasound has yielded diverse results, ranging from potentiating the technological and functional properties of various foods to different operating conditions. Similarly, the results that were obtained vary according to the ultrasonic equipment used and the power, frequency and times of sonication, as well as the characteristics of the food system used. However, not all results have been favourable because US can cause damage to the structure of some food components, such as starch, and affect the technological and functional properties of the food. In the literature, there is little research on the effect of sonication on fibre; this gap in the literature is worrisome because fibre is found in a wide variety of foods and provides health benefits. Such research would represent an opportunity for researchers to make use of this technology for the generation of knowledge and improve the techno-functional properties in fibre, which could benefit the human population and the food industry. In this review, we present current results obtained with US in different treatments affecting processes of strong importance in the food industry, emphasizing the effects in the different model systems.

Angiotensin-Converting Enzyme Inhibition In Vitro by Protein Hydrolysates and Peptide Fractions from Mojarra of Nile Tilapia (Oreochromis niloticus) Skeleton.

Mojarra of Nile tilapia (Oreochromis niloticus) skeleton was used as protein source for the preparation of protein hydrolysates and peptide fractions with angiotensin-converting enzyme (ACE) inhibitory activity. The flour presented a content of 34.92% protein and a brightness (luminosity, L*) of 82.29. Protein hydrolysates were obtained from the protein-rich flour with the enzymes Flavourzyme® and Alcalase® reaching degree of hydrolysis (%DH) of 52% and 67% at 100 min of reaction, respectively. Both hydrolysates showed low-molecular-weight (MW) peptides estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The hydrolysates obtained with Flavourzyme at 60 min and at 80 min with Alcalase showed greater ACE inhibitory activity with IC50 values of 0.238 and 0.344 mg/mL, respectively. The peptide fraction A (MW >10 kDa) with Flavourzyme and fraction B (MW = 10-5 kDa) with Alcalase obtained by ultrafiltration of hydrolysates with higher DH presented IC50 of 0.728 and 0.354 mg/mL, respectively, whereas peptide fraction C (MW = 5-3 kDa) with both enzymes hydrolysates with greater ACE inhibitory activity showed IC50 values of 0.470 and 0.634 mg/mL. The components obtained in this study could be used as functional ingredients in the design and development of functional foods.

Physical, mechanical, functional and chemical properties of Mexican pink pinion (Pinus pinea L.).

The aim of the study was to evaluate the physical and mechanical properties of the nut and kernel of the Mexican pink pinion (Pinus pinea L.), as well as the physicochemical and functional properties of whole pink pinion meal (WPPM) as well defatted pink pinion meal (DPPM). The length, width, thickness, geometric diameter, arithmetic diameter, sphericity, aspect ratio, surface area, volume, density and hardness of the nut were higher than those of the kernels. The kernel had the highest coefficient of friction, while the nut had the highest angle of repose. WPPM had high fat and protein contents, at 40.5 g/100 g and 41.1 g/100 g, respectively. The major component of DPPM was protein (64.85 g/100 g). The DPPM had higher water absorption, oil absorption, emulsifying and lower gelation capacities (4%), indicating that the meal is a potential source of protein isolates or additives for functional foods and WPPM in food formulations.

Effect of frying and storage on oxidative quality of conjugated linoleic-acid-rich soybean oil produced by photoisomerization using plantain as a model system.

BACKGROUND: Conjugated linoleic acid (CLA) is known to have beneficial properties to health. Naturally, in foods it is found in very low concentrations, and so these beneficial properties cannot be obtained. This study investigated the enrichment of soybean oil by photoisomerization, as well as assessing its oxidative stability during the frying process using plantain slices as a model system and after a storage period of 20 days at 60 °C. RESULTS: The oxidative stability of soybean oil enriched with CLA by photoirradiation was measured based on the peroxide, p-anisidine, and Totox values, as well as by the polyphenol content, tocopherol content and DPPH· scavenging capacity. The results obtained showed that a substantial amount of CLA was obtained by photoirradiation (31.73%). The oxidative stability values of the oil enriched with CLA showed good stability during a frying cycle; however, this stability decreased when it was stored and during the final frying cycles. CONCLUSIONS: The results obtained indicated that photoirradiation is a good technique for obtaining oils enriched with CLA, and in this way CLA can be incorporated into foods; however, it is necessary to add antioxidants to improve their stability. © 2019 Society of Chemical Industry.

Comparison of performance and quantitative descriptive analysis sensory profiling and its relationship to consumer liking between the artisanal cheese producers panel and the descriptive trained panel.

The aim of this research was to compare the performance and sensory profiling of a panel of artisanal cheese producers against a trained panel and their relationship to consumer liking (external preference mapping). Performance was analyzed statistically at an individual level using the Fisher's test (F) for discrimination, the mean square error for repeatability, and Manhattan plots for visualizing the intra-panel homogeneity. At group level, performance was evaluated using ANOVA. External preference mapping technique was applied to determine the efficiency of each sensory profile. Results showed that the producers panel was discriminant and repetitive with a performance similar to that of the trained panel. Manhattan plots showed that the performance of artisanal cheese producers was more homogeneous than trained panelists. The correlation between sensory profiles (Rv = 0.95) demonstrated similarities in the generation and use of sensory profiles. The external preference maps generated individually with the profiles of each panel were also similar. Recruiting individuals familiar with the production of artisanal cheeses as panelists is a viable strategy for sensory characterization of artisanal cheeses within their context of origin because their results were similar to those from the trained panel and can be correlated with consumer liking data.

Effect of oil extraction assisted by ultrasound on the physicochemical properties and fatty acid profile of pumpkin seed oil (Cucurbita pepo).

The effects of amplitude and time of ultrasound-assisted extraction on the physicochemical properties and the fatty acid profile of pumpkin seed oil (Cucurbita pepo) were evaluated. Ultrasound time (5-30 min) and the response variables amplitude (25-100%), extraction yield, efficiency, oxidative stability in terms of the free fatty acids (FFA) of the plant design comprising two independent experiments variables, peroxide (PV), p-anisidine (AV), totox value (TV) and the fatty acid profile were evaluated. The results were analyzed by multiple linear regression. The time and amplitude showed significant differences (P<0.05) for all variables. The highest yield of extraction was achieved at 5 min and amplitude of 62.5% (62%). However, the optimal ultrasound-assisted extraction conditions were as follows: ultrasound time of 26.34 min and amplitude of 89.02%. All extracts showed low FFA (2.75-4.93% oleic acid), PV (1.67-4.68 meq/kg), AV (1.94-3.69) and TV (6.25-12.55) values. The main fatty acids in all the extracts were oleic and linoleic acid. Therefore, ultrasound-assisted oil extraction had increased performance and reduced extraction time without affecting the oil quality.

Physical properties of ebony seed (Pithecellobium flexicaule) and functional properties of whole and defatted ebony seed meal.

A partial characterization was done of ebony (Pithecellobium flexicaule) seed physical properties, and how defatting affected some functional properties of ebony seed meal. Average seed dimensions were 13.02 mm length, 8.78 mm width and 9.65 mm thickness. Geometric diameter was 10.76 mm, volume was 530 mm(3), surface area was 364.33 mm(2), sphericity was 83.26 % and aspect ratio was 68.24 %. Thousand-seed weight was 0.70 Kg, of which 0.42 Kg (60 %) represented the kernel. Defatted ebony seed meal differed from whole meal in all measured parameters, particularly in its protein (44.72 g/100 g) and carbohydrates (44.12 g/100 g) proportions. The defatted meal had higher water absorption capacity (1.28 g/g sample), water solubility capacity (26.06 %), oil absorption capacity (2.04 g/g sample), emulsifying capacity (53.78 %) and gelling capacity (8 % w/v) than the whole meal. Ebony seed physical properties may prove useful in designing post-harvest processing equipment and in quality control. The high protein content of defatted ebony seed meal suggests its use as a natural alternative ingredient in numerous food industry applications.

Impact of micronized starfruit (Averrhoa carambola L.) fiber concentrate on lipid metabolism in mice.

The objective of this study was to evaluate the effect of micronized insoluble fiber from starfruit bagasse as an ingredient of a functional food (FF) or as micronized insoluble fiber-rich fraction (IFRF) and its effects in vivo on lipids metabolism in a murine model. Experimental animals were divided in four isoproteic (15.8%) treatments differing on the fiber and cholesterol level used. The micronized IFRF particle size ranged from 37.5 to 149 µm. Treatments with added IFRF and those including the FF lowered serum triacylglycerols, total cholesterol (TC), high-density lipoproteins (HDL), and low-density lipoproteins (LDL) concentrations (IFRF: 14.2, 25.4, 55.06, and 12.18%, respectively; FF: 30.18, 39.47, 35.11, and 43.18%, respectively). IFRF produced the overall highest serum hypolipidemic effect and prevented the development of non-alcoholic fatty liver. Both the IFRF and the FF exhibited hypolipidemic effects that suggest a potential role of starfruit insoluble fiber as a component of FFs aimed against cardiovascular diseases.