Duration-Specific Peak Acceleration Demands During Professional Female Basketball Matches.

Purpose: Describing the most intense periods of match-play is important in player monitoring and the development of specific training programs. The aim of this study was to extract maximum accelerations during basketball match-play and describe those as a function over time durations. Methods: Twelve professional female basketballers were monitored during 13 official matches to calculate acceleration profiles. Moving medians of time durations ranging from 0.3 to 1,800 s were computed to extract peak acceleration and deceleration magnitudes for the resultant (|accres|), horizontal (|acchor|), and vertical (|accvert|) planes. The relationship between peak magnitudes and time durations was modeled by an exponential function. Distinct curve characteristics can be described by the function parameters scale and decrease rate, which refer to an athlete's ability to perform maximum acceleration intensities over short-time (scale) and middle-time intervals (decrease rate). Generalized linear mixed-models were calculated to determine plane-specific differences in acceleration and deceleration capacities. Results: Function parameters differed significantly between |accres|, |acchor| and |accvert| [effect size (ES) = 0.33-1.15]. Comparisons within each movement plane revealed significant differences between positive and negative |accres| for the parameters scale (ES = 0.34) and decrease rate (ES = 0.39). All function parameters differed significantly between |accvert|+ and |decvert| (ES = 0.39-0.71). Rank analyses between players revealed significant inter-individual differences for all function parameters in all groups. Conclusions: Modeling peak acceleration magnitudes as a function over log-transformed time durations provides an opportunity to systematically quantify the most intense periods of match-play over short, middle and long time intervals (0.3-1,800 s). Detailed knowledge about these periods may positively contribute to training prescriptions, which intend to prepare players for highest intensities experienced during match-play in order to improve performance and prevent injuries. Derived function parameters allow inter-individual comparisons and provide insights into players' physical capabilities. This study further examines plane-specific intensity demands of professional female basketball, emphasizing the need for coaches to prepare players for maximum decelerations in the vertical plane.

Validation of Wearable Sensors during Team Sport-Specific Movements in Indoor Environments.

The aim of this study was to determine possible influences, including data processing and sport-specific demands, on the validity of acceleration measures by an inertial measurement unit (IMU) in indoor environments. IMU outputs were compared to a three-dimensional (3D) motion analysis (MA) system and processed with two sensor fusion algorithms (Kalman filter, KF; Complementary filter, CF) at temporal resolutions of 100, 10, and 5 Hz. Athletes performed six team sport-specific movements whilst wearing a single IMU. Mean and peak acceleration magnitudes were analyzed. Over all trials (n = 1093), KF data overestimated MA resultant acceleration by 0.42 ± 0.31 m∙s-2 for mean and 4.18 ± 3.68 m∙s-2 for peak values, while CF processing showed errors of up to 0.57 ± 0.41 m∙s-2 and -2.31 ± 2.25 m∙s-2, respectively. Resampling to 5 Hz decreased the absolute error by about 14% for mean and 56% for peak values. Still, higher acceleration magnitudes led to a large increase in error. These results indicate that IMUs can be used for assessing accelerations in indoor team sports with acceptable means. Application of a CF and resampling to 5 Hz is recommended. High-acceleration magnitudes impair validity to a large degree and should be interpreted with caution.

Player Monitoring in Indoor Team Sports: Concurrent Validity of Inertial Measurement Units to Quantify Average and Peak Acceleration Values.

The increasing interest in assessing physical demands in team sports has led to the development of multiple sports related monitoring systems. Due to technical limitations, these systems primarily could be applied to outdoor sports, whereas an equivalent indoor locomotion analysis is not established yet. Technological development of inertial measurement units (IMU) broadens the possibilities for player monitoring and enables the quantification of locomotor movements in indoor environments. The aim of the current study was to validate an IMU measuring by determining average and peak human acceleration under indoor conditions in team sport specific movements. Data of a single wearable tracking device including an IMU (Optimeye S5, Catapult Sports, Melbourne, Australia) were compared to the results of a 3D motion analysis (MA) system (Vicon Motion Systems, Oxford, UK) during selected standardized movement simulations in an indoor laboratory (n = 56). A low-pass filtering method for gravity correction (LF) and two sensor fusion algorithms for orientation estimation [Complementary Filter (CF), Kalman-Filter (KF)] were implemented and compared with MA system data. Significant differences (p < 0.05) were found between LF and MA data but not between sensor fusion algorithms and MA. Higher precision and lower relative errors were found for CF (RMSE = 0.05; CV = 2.6%) and KF (RMSE = 0.15; CV = 3.8%) both compared to the LF method (RMSE = 1.14; CV = 47.6%) regarding the magnitude of the resulting vector and strongly emphasize the implementation of orientation estimation to accurately describe human acceleration. Comparing both sensor fusion algorithms, CF revealed slightly lower errors than KF and additionally provided valuable information about positive and negative acceleration values in all three movement planes with moderate to good validity (CV = 3.9 - 17.8%). Compared to x- and y-axis superior results were found for the z-axis. These findings demonstrate that IMU-based wearable tracking devices can successfully be applied for athlete monitoring in indoor team sports and provide potential to accurately quantify accelerations and decelerations in all three orthogonal axes with acceptable validity. An increase in accuracy taking magnetometers in account should be specifically pursued by future research.