RESUMO
Permanent marker deposition (PMD), which creates permanent writing on an object with a permanent marker, was investigated as a method to deposit a protection layer against focused ion beam damage. PMD is a simple, fast and cheap process. Further, PMD is excellent in filling in narrow and deep trenches, enabling damage-free observation of high aspect ratio structures with atomic resolution in transmission electron microscopy (TEM). The microstructure, composition, gap filling ability and planarization of the PMD layer were studied using dual beam focused ion beam, transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy loss spectroscopy. It was found that a PMD layer is basically an amorphous carbon structure, and that such a layer should be at least 65 nm thick to protect a surface against 30 keV focused ion beam damage. We suggest that such a PMD layer can be an excellent protection layer to maintain a pristine sample structure against focused ion beam damage during transmission electron microscopy specimen preparation.
RESUMO
It was demonstrated that the severe plastic deformation of a surface induced by repeated ball collisions can be effectively used for fabrication of the nanocrystalline surface composite layers. The Cu disk was fixed at the top of a vibration chamber and ball treated. Al, Zr, Ni, Co and Fe were introduced into a Cu plate as contaminants from the grinding media one after the other by 15-min ball treatment. The composite structure was formed as a result of mechanical intermixing of the components. The particle size in as-fabricated layer ranged from 2 nm to 20 nm, with average values of about 7 nm. As-fabricated layer contained non-equilibrium multicomponent solid solution based on FCC Cu crystal structure, Zr-based phase, nanosized steel debris and amorphous phase. The hardness of the as-fabricated composite was almost ten times that of the initial Cu plate.
