Clinical study with sandblasted dental implants: a 17-year retrospective follow up.

Sandblasting is a standard procedure used for treating dental implant (DI) surfaces to enhance the osseointegration with known clinical success. This clinical study aimed to evaluate the long-term clinical outcomes of DIs with external hexagon connections and a surface sandblasted with calcium phosphate. Two hundred and seventy-five Mg-osseous™ (Mozo-Grau™) screw DIs were placed in 86 patients using a two-stage surgical technique and conventional loading protocol (at three months). Dental implants and prosthetic clinical findings were evaluated during a 17-year follow up. Four DIs were lost during the healing period, and 108 prostheses were placed over the 271 DIs left: 58 unitary implant-supported prosthesis (ISP), 31 partially ISP, 14 full-arch ISP, and five overdentures. Fourteen DIs were lost during the follow-up period. Clinical results indicated a DI survival rate of 93.50%. A total of 11.80% of DIs showed peri-implantitis as the primary biological complication. The mean (SD) marginal bone loss was 1.78 (0.40) mm, ranging from 0.90 to 2.80 mm. The most frequent complication was mechanical prosthodontic complications (24.40%). Sandblasted surface DIs inserted in both maxillary and mandibular areas produce favourable long-term (17-year follow up) outcomes and stable tissue conditions when a delayed loading protocol is followed.

Immediate Loading of Implants with Fixed Rehabilitations in Geriatric Edentulous Patients; Biological Complications.

BACKGROUND: This study aimed to report the outcomes of the immediate loading of implants with fixed rehabilitations in edentulous geriatric patients. METHODS: Edentulous geriatric patients were diagnosed with an oral examination, radiographic evaluation, and intermaxillary relations and treated with fixed rehabilitation over several implants. After immediate surgery, the implants were immediately loaded with a fully fixed prosthesis. RESULTS: Twenty-four patients (20 females and 4 males) were treated using a total 210 implants. All patients (100%) had a previous history of periodontitis. Eleven patients (45.8%) were smokers. Eleven patients (45.8%) suffered from chronic medical diseases (i.e., diabetes, cardiovascular diseases). The study's clinical follow-up period extended for three years, during which thirty-three fixed prostheses were installed over the implants in 24 patients. The average marginal bone loss measured was 1.33 ± 0.17 mm. The success rate of the implants and prosthodontics being placed in this study yielded 98.5% and 97%, respectively. One patient (4.2%) showed some kind of technical complications. Eleven patients (45.8%) showed mucositis, and 25 implants (11.9%) in 10 patients (41.7%) were associated with peri-implantitis. CONCLUSIONS: This study shows that the treatment of edentulous geriatric patients by immediate loading of implants with fixed rehabilitations is a clinically successful protocol but with a high prevalence of peri-implant diseases.

Early Loading of Two Implants Supporting Mandibular Overdentures in Geriatric Edentulous Patients: A 12-Year Follow-Up Study.

Background: This study aims to show the clinical outcomes of implants supporting mandibular overdentures in edentulous patients. Methods: Mandibular edentulous patients were diagnosed with an oral examination, panoramic radiograph, and diagnostic casts for intermaxillary relations and treated with overdentures over two implants. After two-stage surgery, implants were early loaded with an overdenture at 6 weeks. Results: Fifty-four patients (28 females and 24 males) were treated with 108 implants. Thirty-two patients (59.2%) had a previous history of periodontitis. Twenty-three patients (46%) were smokers. Forty patients (74.1%) suffered from systemic diseases (i.e., diabetes, cardiovascular diseases). The clinical follow-up of the study was 147.8 ± 10.4 months. The clinical outcomes showed a global success of 94.5% of implants. Fifty-four overdentures were placed in the patients over the implants. The mean marginal bone loss was 1.12 ± 0.34 mm. Nineteen patients (35.2%) showed some kind of mechanical prosthodontic complication. Sixteen implants (14.8%) were associated with peri-implantitis. Conclusions: Based on the clinical results obtained, we can determine that the treatment of elderly edentulous patients with mandibular overdentures through the early loading of two placed implants is a successful implant protocol.

Silver coating on dental implant-abutment connection screws as potential strategy to prevent loosening and minimizing bacteria adhesion.

Introduction: One of the main problems for the long-term behavior of dental implants are loosening of the implant-abutment connection screws and bacterial infiltration. The aim of this work is to increase the screw fixation by silver coating, providing superior mechanical retaining and antibacterial effect. Methods: Eighty dental implants with their abutments and screws have been studied. Twenty screws were not coated and were used as a control while the rest of screws were silver coated by sputtering, with three different thickness: 10, 20 and 40 µm and 20 screws per each thickness. Coating morphology and thickness were determined by scanning electron microscopy using image analysis systems. The screws were tightened for each of the thicknesses and the control with two torques 15 Ncm and 20 Ncm and tested under mechanical fatigue simulating oral stresses up to a maximum of 500,000 cycles. The remaining torques at different cycles were determined with a high-sensitivity torquemeter. Cell viability assays were performed with SaOs-2 osteoblasts and microbiological studies were performed against Streptococcus gordonii and Enterococcus faecalis bacteria strains, determining their metabolic activity and viability using live/dead staining. Results: It was observed a decrease in torque as cycles increase. For a preload of 15 Ncm at 100,000 cycles, the loosening was complete and, for 20 Ncm at 500,000 cycles, 85% of torque was lost. The silver coatings retained the torque, especially the one with a thickness of 40 µm, retaining 90% of the initial torque at 500,000 cycles. It was observed that osteoblastic viability values did not reach 70%, which could indicate a slight cytotoxic effect in contact with cells or tissues; however, the screw should not be in direct contact with tissue or living cells. Silver coating induced a significant reduction of the bacteria metabolic activity for Streptococcus gordonii and Enterococcus faecalis, around 90% and 85% respectively. Discussion: Therefore, this coating may be of interest to prevent loosening of implant systems with a worthy antibacterial response.

Immediate Functional Loading with Full-Arch Fixed Implant-Retained Rehabilitation in Periodontal Patients: Clinical Study.

(1) Background. The immediate functional loading of implants is a clinical procedure used for treating periodontal edentulous patients. This clinical study aimed to evaluate the clinical outcomes of the immediate functional loading of implants with fully fixed rehabilitations in compromised periodontal patients. (2) Methods. Three hundred and five implants IPX screw implants were placed in 27 periodontal patients using an immediate functional loading protocol with fixed rehabilitations. All patients had a previous history of periodontitis, four patients (14.8%) were smokers and seven patients (25.9%) suffered from chronic medical conditions. (3) Results. Implant and prosthetic clinical findings were evaluated during a mean period of 41.3 ± 19.6 months. No implants were lost during the clinical follow-up. The cumulative survival rate for all implants was 100%. Regarding the prostheses designed, a total of 54 fixed prostheses were placed in the 27 patients immediately after the surgery. Forty-four hybrid fixed prostheses (81.5%) and 10 fixed rehabilitations (18.5%) were placed in the patients. The mean marginal bone loss was 1.51 ± 1.16 mm, ranging from 0 to 3.5 mm during the follow-up evaluation. Thirty-one implants (10.2%) in 10 patients (37%) were associated with peri-implantitis. Five patients (18.5%) showed some kind of technical complications (loss/fracture of the prosthetic screw, acrylic resin fracture, ceramic chipping). (4) Conclusions. The clinical outcomes of this study demonstrate that fixed rehabilitation by immediate functional loading of implants is considered a predictable procedure.

Long-Term Treatment Outcomes of Implant Prostheses in Partially and Totally Edentulous Patients.

Implant dental therapy is a clinical procedure used for treating patients with tooth loss with known clinical success. This clinical study aimed to evaluate the long-term clinical outcomes of dental implants in partially and totally edentulous patients. A total of 544 Microdent (Microdent SU, Implant Microdent System®, Santa Eulàlia de Ronçana Barcelona, Spain) screw implants were placed in 111 patients using a two-stage surgical technique and a conventional loading protocol (lasting 3 months). Implant and prosthetic clinical findings were evaluated during a 15-year follow-up. A total of 6 implants were lost during the healing period, and 124 prostheses were placed over the 538 implants that remained: 20 single crowns, 52 partially fixed bridges, 45 full-arch fixed restorations, and 7 overdentures. A total of 20 of these were lost during the follow-up period. The cumulative survival rate for all implants was 96.4%. The data underwent statistical analysis (significance level: p < 0.05). The mean marginal bone loss was 1.82 ± 0.54 mm, ranging from 1.2 to 3.1 mm. The most frequent complications were mechanical prosthodontic complications (16.2%). In all, 11.8% of implants showed periimplantitis as the primary biological complication. Dental implants inserted in both the maxillary and mandibular areas produce long-term favorable outcomes and stable tissue conditions when a delayed loading protocol is followed.

Implant Treatment by Guided Surgery Supporting Overdentures in Edentulous Mandible Patients.

INTRODUCTION: This study aimed to show the clinical outcomes of implants inserted by guided surgery supporting mandibular overdentures in edentulous patients. PATIENTS AND METHODS: Mandibular edentulous patients were diagnosed with an oral examination, cone-beam computerized tomography, and diagnostic casts for intermaxillary relations and treated with overdentures over two implants by guided surgery. After flapless surgery, implants were early loaded with an overdenture at 6 weeks. RESULTS AND DISCUSSION: Fourteen patients (nine females and five males) were treated with 28 implants. Four patients (28.6%) had a previous history of periodontitis. Five patients (35.7%) were smokers. Nine patients (64.3%) suffered from systemic diseases (i.e., diabetes, cardiovascular diseases). The clinical follow-up of the study was 44.7 ± 31.4 months. Clinical outcomes showed a global success of 100% of implants. Fourteen overdentures were placed in the patients over the implants. Mean marginal bone loss was 1.25 mm ± 0.95 mm. Four patients (28.6%) showed some kind of mechanical prosthodontic complications. Six implants (21.4%) were associated with peri-implantitis. CONCLUSIONS: This study indicates that treatment of mandibular edentulous patients with overdentures by guided surgery and early loading of implants placed appears to be a successful implant protocol.

Long-Term Clinical Study of Implants Placed in Maxillary Sinus Floor Augmentation Using Beta-Tricalcium Phosphate.

INTRODUCTION: The aim of this study was to show the long-term clinical outcomes of implants placed in maxillary sinus floor augmentation (MFSA) using beta-tricalcium phosphate (ß-TCP). PATIENTS AND METHODS: Maxillary patients were diagnosed for MFSA and used beta- ß-TCP. After the lateral sinus surgery, implants were loaded at 6 months with restorations. The clinical follow-up was at 10 years. RESULTS: One hundred and one patients (58 females and 43 males) were treated with MFSA. Twenty-nine patients (28.7%) had a history of periodontitis. Thirty-three patients (32.7%) were smokers. One hundred and twenty-one MFSA, 81 unilateral and 20 bilateral sites, with 234 implants were performed. The average vertical bone height available was 4.92 ± 1.83 mm. The average vertical bone gain obtained was 6.95 ± 2.19 mm following MFSA. The implant cumulative survival rate was 97.2%. Three implants (1.3%) were lost during the healing period. Six implants (2.6%) were lost by peri-implantitis. One hundred and fifteen restorations were placed in the patients. Mean marginal bone loss was 1.93 mm ± 1.03 mm. Six patients (27.3%) showed technical complications. Thirty-six implants (15.3%) in 14 patients (13.9%) were associated with peri-implantitis. CONCLUSIONS: This study indicates that treatment with implant-supported restoration by MFSA using ß-TCP constitutes a successful implant approach.

Osseointegration of Sandblasted and Acid-Etched Implant Surfaces. A Histological and Histomorphometric Study in the Rabbit.

Titanium surface is an important factor in achieving osseointegration during the early wound healing of dental implants in alveolar bone. The purpose of this study was to evaluate sandblasted-etched surface implants to investigate the osseointegration. In the present study, we used two different types of sandblasted-etched surface implants, an SLA™ surface and a Nanoblast Plus™ surface. Roughness and chemical composition were evaluated by a white light interferometer microscope and X-ray photoelectron spectroscopy, respectively. The SLA™ surface exhibited the higher values (Ra 3.05 µm) of rugosity compared to the Nanoblast Plus™ surface (Ra 1.78 µm). Both types of implants were inserted in the femoral condyles of ten New Zealand white rabbits. After 12 weeks, histological and histomorphometric analysis was performed. All the implants were osseointegrated and no signs of infection were observed. Histomorphometric analysis revealed that the bone-implant contact % (BIC) ratio was similar around the SLA™ implants (63.74 ± 13.61) than around the Nanoblast Plus™ implants (62.83 ± 9.91). Both implant surfaces demonstrated a favorable bone response, confirming the relevance of the sandblasted-etched surface on implant osseointegration.