SET-LRP of the Hydrophobic Biobased Menthyl Acrylate.

Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) of (-)-menthyl acrylate, a biobased hydrophobic monomer, was investigated at 25 °C in ethanol, isopropanol, ethyl lactate, 2,2,2-trifluoroethanol (TFE), and 2,2,3,3-tetrafluoropropanol (TFP). All solvents are known to promote, in the presence of N ligands, the mechanistically required self-regulated disproportionation of Cu(I)Br into Cu(0) and Cu(II)Br2. Both fluorinated alcohols brought out their characteristics of universal SET-LRP solvents and showed the proper polarity balance to mediate an efficient polymerization of this bulky and hydrophobic monomer. Together with the secondary alkyl halide initiator, methyl 2-bromopropionate (MBP), and the tris(2-dimethylaminoethyl)amine (Me6-TREN) ligand, TFE and TPF mediated an efficient SET-LRP of MnA at room temperature that proceeds through a self-generated biphasic system. The results presented here demonstrate that Cu(0) wire-catalyzed SET-LRP can be used to target polyMnA with different block lengths and narrow molecular weight distribution at room temperature. Indeed, the use of a combination of techniques that include GPC, 1H NMR, MALDI-TOF MS performed before and after thioetherification of bromine terminus via "thio-bromo" click chemistry, and in situ reinitiation copolymerization experiments supports the near perfect chain end functionality of the synthesized biobased hydrophobic polymers. These results expand the possibilities of SET-LRP into the area of renewable resources where hydrophobic compounds are widespread.

SET-LRP in the Neoteric Ethyl Lactate Alcohol.

Ethyl lactate (EtLa), a green and safe agrochemical solvent, is gifted with some properties that make it a good candidate for SET-LRP. It dissolves CuBr2, mediates an efficient disproportionation of CuBr in the presence of tris(2-(dimethylamino)ethyl)amine (Me6-TREN), and is capable to dissolve both aqueous (polar) and hydrocarbon (nonpolar) soluble monomers and polymers. Here, we report that EtLa is an excellent solvent for the Cu(0) wire-catalyzed SET-LRP to produce both hydrophilic and hydrophobic polyacrylates that exhibit precise chain end functionality. These results will expand the table of SET-LRP solvents with a new green member of biological origin that is also biodegradable and, therefore, are expected to contribute to continue expanding the use of SET-LRP in the field of biomacromolecules, bioconjugates, and other biology and medicine related disciplines.

Thermoplastic polyurethanes from undecylenic acid-based soft segments: structural features and release properties.

A set of thermoplastic polyurethanes is synthesized, combining undecylenic acid-derived telechelic diols as soft segments and 1,4-butanediol/4,4'-methylenebis(phenylisocyanate) as a hard segment (HS). These polymers are fully chemically and physically characterized by means of NMR and Fourier transform IR (FTIR) spectroscopy, size-exclusion chromatography (SEC), DSC, thermogravimetric analysis (TGA), tensile testing, and contact angle measurements. The obtained results reveal that both the molecular weight of the diol and the HS content greatly influence the physical and mechanical properties of these polymers. In addition, given the potential use of these materials for biomedical applications, hydrolytic degradation, their biocompatibility using a human fibroblast cell line, and performance as drug delivery carriers are evaluated.

"Click" synthesis of fatty acid derivatives as fast-degrading polyanhydride precursors.

Fast-degrading linear and branched polyanhydrides are obtained by melt-condensation of novel di- and tri-carboxylic acid monomers based on oleic and undecylenic acid synthesized using photoinitiated thiol-ene click chemistry. (1)H NMR spectroscopy, size exclusion chromatography, differential scanning calorimetry, thermogravimetric analysis, and FT-IR spectroscopy have been used to fully characterize these polymers. The hydrolytic degradation of these polymers was studied by means of weight loss, anhydride bond loss, and changes in molecular weight, showing fast degrading properties. Drug release studies from the synthesized polyanhydrides have also been conducted, using rhodamine B as a hydrophobic model drug, to evaluate the potential of these polymers in biomedical applications.

Light-induced switching of the wettability of novel asymmetrical poly(vinyl alcohol)-co-ethylene membranes blended with azobenzene polymers.

Novel composite asymmetrical membranes based on poly(vinyl alcohol)-co-ethylene (EVAL) as the host material and new polyethers that contain azobenzene moieties in the side chain were prepared by dry-cast phase inversion after dissolving the azo polymers in tetrahydrofuran and EVAL in dimethylsulfoxide and subsequently mixing the resulting solutions. By taking advantage of the proper temperature variation in the oven used for solvent evaporation, asymmetrical membranes that exhibited a dense, crystalline layer on the bottom and a porous, mainly amorphous layer on the top were obtained. Remarkable changes in the surface morphology and the contact angle with water were observed on the top surfaces of the composite membranes. This was ascribed not only to the enhanced concentration of azo polymer on the top surface but mostly to a conformational change in EVAL induced by the photoisomerization of the guest azo groups, as shown by HRMAS (1)H NMR. The morphological and structural changes in EVAL could be reversed on exposing the membrane to visible light for 24 h.

Rapid approach to biobased telechelics through two one-pot thiol-ene click reactions.

The application of environmentally friendly thiol-ene chemistry to the preparation of biobased telechelics is presented in this work. This methodology is based on two one-pot photoinitiated thiol-ene click processes: step-growth polymerization using a 3,6-dioxa-1,8-octanedithiol and end-group postpolymerization modification with three functional thiols: 2-mercaptoethanol, 3-mercaptopropionic acid, and 3-mercaptopropyltrimethoxysilane. We applied this approach to a potentially 100% biomass-derived monomer, allyl ester of 10-undecenoic acid (UDA). To show the generality and scope of this methodology, a series of well-defined telechelics with molecular weight ranging from 1000-3000 g/mol and hydroxyl, carboxyl, or trimethoxysilyl groups at the polymer terminus were prepared. An exhaustive (1)H NMR and MALDI-TOF MS analyses demonstrates the highly end-group fidelity of this methodology being an interesting procedure for the accelerated preparation of telechelics derived from divinyl monomers. UDA-based thelechelic diol prepared using this methodology was reacted with 4,4'-methylenebis(phenylisocyanate) and 1,4-butanediol as the chain extender to obtain multiblock poly(ester urethane).

Silicon-containing soybean-oil-based copolymers. Synthesis and properties.

New silicon-containing soybean-oil-based copolymers were prepared from soybean oil, styrene, divinylbenzene, and p-trimethylsilylstyrene by cationic polymerization using boron trifluoride etherate as initiator. Soxhlet extraction and NMR spectroscopy indicate that the copolymers consist of a cross-linked network plasticized with varying amounts of oligomers and unreacted oil. This soluble fraction increases when the SiST content in the feed increases, according to a lower reactivity of this monomer. The thermal, dynamomechanical, and flame-retardant properties of these materials were examined. Thermosets with glass transition temperatures ranging from 50 to 62 degrees C, which are thermally stable below 350 degrees C, and with LOI values from 22.6 to 29.7 were obtained. Their properties suggest that these materials may prove to be useful alternatives for current non-renewable-based thermosets and that the flame-retardant properties of vegetable-oil-based thermosets can be improved by adding covalently bonded silicon to the polymer.

Polyurethane networks from fatty-acid-based aromatic triols: synthesis and characterization.

Novel biobased aromatic triols (1,3,5-(9-hydroxynonyl)benzene and 1,3,5-(8-hydroxyoctyl)-2,4,6-octylbenzene) were synthesized through the transition-metal-catalyzed cyclotrimerization of two alkyne fatty acid methyl esters (methyl 10-undecynoate and methyl 9-octadecynoate) followed by the reduction of the ester groups to give terminal primary hydroxyl groups. A series of biobased segmented polyurethanes based on these triols, 1,4-butanediol as a chain extender and 4,4'-methylenebis(phenyl isocyanate) as a coupling agent, were synthesized. Samples were prepared with hard-segment contents up to 50%. The morphologies and thermal properties of these polyurethanes were studied by Fourier transform infrared spectroscopy, wide-angle X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical thermal analysis. Partial crystallinity and phase separation were detected in samples with hard-segment content of 50%.

Poly(ether urethane) networks from renewable resources as candidate biomaterials: synthesis and characterization.

A series of poly(ether urethane) networks were synthesized from epoxidized methyl-oleate-based polyether polyol and 1,3-propandiol using l-lysine diisocyanate as a nontoxic coupling agent. Polyurethanes with different hard segment contents were prepared to tune the final properties of the materials. The polyurethanes were fully chemically and physically characterized, including water uptake and in vitro hydrolytic degradation measurements. The weight loss of the polyurethanes was traced, and the changes in the surface morphology with the degradation time were examined by scanning electron microscopy. The experimental results revealed that the hard segment content is the main factor that controls the physical, mechanical, and degradation properties of these polymers. The observed diversity in material properties suggests that these polyurethanes may be useful for a wide range of biomedical polymer applications.

Bionanocomposites from renewable resources: epoxidized linseed oil-polyhedral oligomeric silsesquioxanes hybrid materials.

This study is concerned with the preparation and properties of a new class of bionanocomposites from renewable resources. Epoxidized linseed oil (ELO) and 3-glycidylpropylheptaisobutyl-T8-polyhedral oligomeric silsesquioxane (G-POSS) (2, 5, and 10 wt %) were cross-linked, and Fourier transform infrared spectroscopy (FTIR), dynamic mechanical thermal analysis (DMTA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were employed to characterize the POSS-reinforced oil-based polymer networks. No POSS aggregates were observed for the 2 wt % G-POSS nanocomposite by SEM. POSS-rich particles with diameters of several nanometers were observed in the nanocomposites with 5 and 10 wt % G-POSS. Enhanced glass transition temperatures and storage moduli of the networks in the glassy state and rubber plateau were observed to be higher than those of the POSS-free oil based polymer network, due to the reinforcement effect of POSS cages.