BaCoO2 with Tetrahedral Cobalt Coordination: The Missing Element to Understand Energy Storage and Conversion Applications in BaCoO3-δ-Based Materials.

Barium-cobaltate-based perovskite (BaCoO3-δ) and barium-cobaltate-based nanocomposites have been intensively studied in energy storage and conversion devices mainly due to flexible oxygen stoichiometry and tunable nonprecious transition metal oxidation states. Although a rich and complex family of structural polymorphs has already been reported for these perovskites in the literature, the potential structural evolution that may occur during the oxygen reduction reaction and the oxygen evolution reaction has not been investigated so far. In this study, we synthesized and characterized the lowest Co-oxidation state possible in the compound, BaCoO2, which exhibits a quartz-derived, trigonal structure with a helicoidally corner-sharing, CoO4-tetrahedral-framework as already proposed by Spitsbergen et al. Oxygen can reversibly be inserted in such a crystal structure to form BaCoO3-δ, i.e., with 0 ≤ δ ≤ 1, based on the results of an in situ coupled thermogravimetric - neutron diffraction study and which presents therefore giant oxygen capacity storage due to the extreme tunability of the electronic configuration of the cobalt cations which defines the fundamental origins of the materials performance. The reversible conversion of BaCoO2 to BaCoO3-δ associated with a similar electronic conductivity above 900 K permits to clarify the high potential of BaCoO3-δ-based energy storage and conversion devices.

Strong Swelling and Symmetrization in Siliceous Zeolites due to Hydrogen Insertion at High Pressure.

Hydrogen and helium saturate the 1D pore systems of the high-silica (Si/Al>30) zeolites Theta-One (TON), and Mobile-Twelve (MTW) at high pressure based on x-ray diffraction, Raman spectroscopy and Monte Carlo simulations. In TON, a strong 22% volume increase occurs above 5 GPa with a transition from the collapsed P21 to a symmetrical, swelled Cmc21 form linked to an increase in H2 content from 12 H2/unit cell in the pores to 35 H2/unit cell in the pores and in the framework of the material. No transition and continuous collapse of TON is observed in helium indicating that the mechanism of H2 insertion is distinct from other fluids. The insertion of hydrogen in the larger pores of MTW results in a strong 11% volume increase at 4.3 GPa with partial symmetrization followed by a second volume increase of 4.5% at 7.5 GPa, corresponding to increases in hydrogen content from 43 to 67 and then to 93 H2/unit cell. Flexible 1D siliceous zeolites have a very high H2 capacity (1.5 and 1.7 H2/SiO2 unit for TON and MTW, respectively) due to H2 insertion in the pores and the framework, in contrast to other atoms and molecules, thereby providing a mechanism for strong swelling.

Preparation of Confined One-Dimensional Boron Nitride Chains in the 1-D Pores of Siliceous Zeolites under High-Pressure, High-Temperature Conditions.

Low-dimensional boron nitride (BN) chains were prepared in the one-dimensional pores of the siliceous zeolites theta-one (TON) and Mobil-twelve (MTW) by the infiltration, followed by the dehydrocoupling and pyrolysis of ammonia borane under high-pressure, high-temperature conditions. High-pressure X-ray diffraction in a diamond anvil cell and in a large-volume device was used to follow in situ these different steps in order to determine the optimal conditions for this process. Based on these results, millimeter-sized samples of BN/TON and BN/MTW were synthesized. Characteristic B-N stretching vibrations of low-dimensional BN were observed by infrared and Raman spectroscopies. The crystal structures were determined using a combination of X-ray diffraction and density functional theory with one and two one-dimensional zig-zag (BN)x chains per pore in BN/TON and BN/MTW, respectively. These 1-D BN chains potentially have interesting photoluminescence properties in the far ultraviolet region of the electromagnetic spectrum.

High-Pressure Synthesis and Gas-Sensing Tests of 1-D Polymer/Aluminophosphate Nanocomposites.

Recently, filling zeolites with gaseous hydrocarbons at high pressures in diamond anvil cells has been carried out to synthesize novel polymer-guest/zeolite-host nanocomposites with potential, intriguing applications, although the small amount of materials, 10-7 cm3, severely limited true technological exploitation. Here, liquid phenylacetylene, a much more practical reactant, was polymerized in the 12 Å channels of the aluminophosphate Virginia Polytechnic Institute-Five (VFI) at about 0.8 GPa and 140 °C, with large volumes in the order of 0.6 cm3. The resulting polymer/VFI composite was investigated by synchrotron X-ray diffraction and optical and 1H, 13C, and 27Al nuclear magnetic resonance spectroscopy. The materials, consisting of disordered π-conjugated polyphenylacetylene chains in the pores of VFI, were deposited on quartz crystal microbalances and tested as gas sensors. We obtained promising sensing performances to water and butanol vapors, attributed to the finely tuned nanostructure of the composites. High-pressure synthesis is used here to obtain an otherwise unattainable true technological material.

Anomalous Volume Changes in the Siliceous Zeolite Theta-1 TON due to Hydrogen Insertion under High-Pressure, High-Temperature Conditions.

High-pressure X-ray diffraction and Raman spectroscopy in a diamond anvil cell were used to study the insertion of the chemical hydrogen storage material, ammonia borane, in the one-dimensional pores of the zeolite theta-1 TON. Heating of this material up to 300 °C under pressures up to 5 GPa resulted in the release of a significant amount of hydrogen due to the conversion of ammonia borane confined in the channels of TON and outside the zeolite to polyaminoborane and then polyiminoborane chains. The filling of TON with hydrogen resulted in a much greater increase in unit cell volume than that corresponding to thermal expansion of normal compact inorganic solids. This process at high temperature is accompanied by a phase transition from the collapsed high-pressure Pbn21 form to the more symmetric Cmc21 phase with expanded pores. This material has a high capacity for hydrogen adsorption under high-temperature, high-pressure conditions.

Effect of Extra-Framework Cations on Negative Linear Compressibility and High-Pressure Phase Transitions: A Study of KCd[Ag(CN)2]3.

The negative thermal expansion material potassium cadmium dicyanoargentate, KCd[Ag(CN)2]3, is studied at high pressure using a combination of X-ray single-crystal diffraction, X-ray powder diffraction, infrared and Raman spectroscopy, and density functional theory calculations. In common with the isostructural manganese analogue, KMn[Ag(CN)2]3, this material is shown to exhibit very strong negative linear compressibility (NLC) in the crystallographic c direction due to structure hinging. We find increased structural flexibility results in enhanced NLC and NTE properties, but this also leads to two pressure-induced phase transitions-to very large unit cells involving octahedral tilting and shearing of the structure-below 2 GPa. The presence of potassium cations has an important effect on the mechanical and thermodynamic properties of this family, while the chemical versatility demonstrated here is of considerable interest to tune unusual mechanical properties for application.

Room temperature magnetoelectric coupling in a molecular ferroelectric ytterbium(III) complex.

Magnetoelectric (ME) materials combine magnetic and electric polarizabilities in the same phase, offering a basis for developing high-density data storage and spintronic or low-consumption devices owing to the possibility of triggering one property with the other. Such applications require strong interaction between the constitutive properties, a criterion that is rarely met in classical inorganic ME materials at room temperature. We provide evidence of a strong ME coupling in a paramagnetic ferroelectric lanthanide coordination complex with magnetostrictive phenomenon. The properties of this molecular material suggest that it may be competitive with inorganic magnetoelectrics.

Mechanism of H2O insertion and chemical bond formation in AlPO(4)-54·xH2O at high pressure.

The insertion of H2O in AlPO4-54·xH2O at high pressure was investigated by single-crystal X-ray diffraction and Monte Carlo molecular simulation. H2O molecules are concentrated, in particular, near the pore walls. Upon insertion, the additional water is highly disordered. Insertion of H2O (superhydration) is found to impede pore collapse in the material, thereby strongly modifying its mechanical behavior. However, instead of stabilizing the structure with respect to amorphization, the results provide evidence for the early stages of chemical bond formation between H2O molecules and tetrahedrally coordinated aluminum, which is at the origin of the amorphization/reaction process.

A high-temperature molecular ferroelectric Zn/Dy complex exhibiting single-ion-magnet behavior and lanthanide luminescence.

Multifunctional molecular ferroelectrics are exciting materials synthesized using molecular chemistry concepts, which may combine a spontaneous electrical polarization, switched upon applying an electric field, with another physical property. A high-temperature ferroelectric material is presented that is based on a chiral Zn(2+) /Dy(3+) complex exhibiting Dy(3+) luminescence, optical activity, and magnetism. We investigate the correlations between the electric polarization and the crystal structure as well as between the low-temperature magnetic slow relaxation and the optical properties.

Poroelastic theory applied to the adsorption-induced deformation of vitreous silica.

When vitreous silica is submitted to high pressures under a helium atmosphere, the change in volume observed is much smaller than expected from its elastic properties. It results from helium penetration into the interstitial free volume of the glass network. We present here the results of concurrent spectroscopic experiments using either helium or neon and molecular simulations relating the amount of gas adsorbed to the strain of the network. We show that a generalized poromechanical approach, describing the elastic properties of microporous materials upon adsorption, can be applied successfully to silica glass in which the free volume exists only at the subnanometer scale. In that picture, the adsorption-induced deformation accounts for the small apparent compressibility of silica observed in experiments.

Giant negative linear compressibility in zinc dicyanoaurate.

The counterintuitive phenomenon of negative linear compressibility (NLC) is a highly desirable but rare property exploitable in the development of artificial muscles, actuators and next-generation pressure sensors. In all cases, material performance is directly related to the magnitude of intrinsic NLC response. Here we show the molecular framework material zinc(II) dicyanoaurate(I), Zn[Au(CN)(2)](2), exhibits the most extreme and persistent NLC behaviour yet reported: under increasing hydrostatic pressure its crystal structure expands in one direction at a rate that is an order of magnitude greater than both the typical contraction observed for common engineering materials and also the anomalous expansion in established NLC candidates. This extreme behaviour arises from the honeycomb-like structure of Zn[Au(CN)(2)](2) coupling volume reduction to uniaxial expansion, and helical Au…Au 'aurophilic' interactions accommodating abnormally large linear strains by functioning as supramolecular springs.

Probing high-pressure phase transitions in Ti-based perovskite-type ferroelectrics using visible resonance Raman spectroscopy.

We report unprecedented dramatic changes in the 647.1 nm Raman signal of PbZr(0.6)Ti(0.4)O(3) occurring in the same pressure ranges as the critical pressures of the antiferrodistortive and ferroelectric-paraelectric phase transitions. This huge decrease in intensity of both the Raman modes and the background, observed for both pressure transmitting media used (glycerol or 4:1 methanol ethanol mixture), is shown to originate from the two-step loss of a resonance Raman effect and the concomitant fluorescence. Changes in the local titanium environment (first with the onset of octahedral tilting and then with the removal of polar cation displacements) alter the electronic band structure and modify the resonance conditions. Furthermore, the optimal resonance conditions are found to be particularly narrow, as shown by the fluorescence spectrum of PbZr(0.6)Ti(0.4)O(3) at atmospheric pressure characterized by the presence of a very well-defined sharp peak (fwhm = 8 nm) centered around 647.1 nm. These results thus demonstrate that visible resonance Raman spectroscopy can be used as a quick and efficient technique for probing phase transitions in PbZr(1-x)Ti(x)O(3) (PZT) and other technologically important perovskite-type materials such as PMN-xPT, PZN-xPT relaxors, lead free piezoelectrics, and ferroelectric nanopowders. This technique appears also a good alternative to UV Raman spectroscopy for probing the polar order at the nanoscale in ultrathinfilms and superlattices.