Nanofeather ruthenium nitride electrodes for electrochemical capacitors.

Fast charging is a critical concern for the next generation of electrochemical energy storage devices, driving extensive research on new electrode materials for electrochemical capacitors and micro-supercapacitors. Here we introduce a significant advance in producing thick ruthenium nitride pseudocapacitive films fabricated using a sputter deposition method. These films deliver over 0.8 F cm-2 (~500 F cm-3) with a time constant below 6 s. By utilizing an original electrochemical oxidation process, the volumetric capacitance doubles (1,200 F cm-3) without sacrificing cycling stability. This enables an extended operating potential window up to 0.85 V versus Hg/HgO, resulting in a boost to 3.2 F cm-2 (3,200 F cm-3). Operando X-ray absorption spectroscopy and transmission electron microscopy analyses reveal novel insights into the electrochemical oxidation process. The charge storage mechanism takes advantage of the high electrical conductivity and the morphology of cubic ruthenium nitride and Ru phases in the feather-like core, leading to high electrical conductivity in combination with high capacity. Accordingly, we have developed an analysis that relates capacity to time constant as a means of identifying materials capable of retaining high capacity at high charge/discharge rates.

Solar-Driven Ammonia Production through Engineering of the Electronic Structure of a Zr-Based MOF.

As a hydrogen carrier and a vital component in fertilizer production, ammonia (NH3) is set to play a crucial role in the planet's future. While its industrial production feeds half of the global population, it uses fossil fuels and emits greenhouse gases. To tackle this issue, photocatalytic nitrogen fixation using visible light is emerging as an effective alternative method. This strategy avoids carbon dioxide (CO2) emissions and harnesses the largest share of sunlight. In this work, we successfully incorporated a 5-nitro isophthalic acid linker into MOF-808 to introduce structural defects and open metal sites. This has allowed modulation of the electronic structure of the MOF and effectively reduced the band gap energy from 3.8 to 2.6 eV. Combination with g-C3N4 enhanced further NH3 production, as these two materials possess similar band gap energies, and g-C3N4 has shown excellent performance for this reaction. The nitro groups serve as acceptors, and their integration into the MOF structure allowed effective interaction with the free electron pairs on N-(C)3 in the g-C3N4 network nodes. Based on DFT calculations, it was concluded that the adsorption of N2 molecules on open metal sites caused a decrease in their triple bond energy. The modified MOF-808 showed superior performance compared with the other MOFs studied in terms of N2 photoreduction under visible light. This design concept offers valuable information about how to engineer band gap energy in MOF structures and their combination with appropriate semiconductors for solar-powered photocatalytic reactions, such as N2 or CO2 photoreduction.

Ruthenium Oxide Nanoparticles Immobilized on Ti3C2 MXene Nanosheets for Boosting Seawater Electrolysis.

Seawater electrolysis represents a viable alternative for large-scale synthesis of hydrogen (H2), which is recognized as the most promising clean energy source, without relying on scarce fresh water. However, high energy cost and harmful chlorine chemistry in seawater limited its development. Herein, an effective catalyst based on a ruthenium nanoparticle-Ti3C2 MXene composite loaded on nickel foam (RuO2-Ti3C2/NF) with an open, fine, and homogeneous nanostructure was devised and synthesized by electrodeposition for high performance and stable overall seawater splitting. To drive a current density of 100 mA cm-2, the RuO2-Ti3C2/NF electrode required a small overpotential of 85 and 351 mV for HER and OER in 1 M KOH with only a slight increase in 1 M KOH seawater (156 and 378 mV for, respectively, HER and OER). An assembled RuO2-Ti3C2/NF-based two-electrode cell required an overpotential of only 1.84 V to acquire 100 mA cm-2 in 1 M KOH seawater and maintained its activity for over 25 h. This low cell voltage effectively prevented chlorine electrochemical evolution without anode protection. These promising results open up new avenues for the effective conversion of abundant seawater resources to hydrogen fuel.

Regioselective and Stereoselective Synthesis of Parthenolide Analogs by Acyl Nitroso-Ene Reaction and Their Biological Evaluation against Mycobacterium tuberculosis.

Historically, natural products have played a major role in the development of antibiotics. Their complex chemical structures and high polarity give them advantages in the drug discovery process. In the broad range of natural products, sesquiterpene lactones are interesting compounds because of their diverse biological activities, their high-polarity, and sp3-carbon-rich chemical structures. Parthenolide (PTL) is a natural compound isolated from Tanacetum parthenium, of the family of germacranolide-type sesquiterpene lactones. In recent years, parthenolide has been studied for its anti-inflammatory, antimigraine, and anticancer properties. Recently, PTL has shown antibacterial activities, especially against Gram-positive bacteria. However, few studies are available on the potential antitubercular activities of parthenolide and its analogs. It has been demonstrated that parthenolide's biological effects are linked to the reactivity of α-exo-methylene-γ-butyrolactone, which reacts with cysteine in targeted proteins via a Michael addition. In this work, we describe the ene reaction of acylnitroso intermediates with parthenolide leading to the regioselective and stereoselective synthesis of new derivatives and their biological evaluation. The addition of hydroxycarbamates and hydroxyureas led to original analogs with higher polarity and solubility than parthenolide. Through this synthetic route, the Michael acceptor motif was preserved and is thus believed to be involved in the selective activity against Mycobacterium tuberculosis.

Designing Visible-Light Photoactive Thioapatites Using Thiovanadate Groups: The Ba5(VO4-αSα)3X (X = F, Cl, I) Phases.

The new thioapatite Ba5(VO4-αSα)3X (X = F, Cl, I) series of compounds was prepared and characterized. Compared to known apatite phases built from unconnected vanadate VO4 groups separated by Ba2+ cations delimiting halide-filled channels, their crystal structure is built from mixed anion thiovanadate VO4-αSα, where V5+ is surrounded by both O and S, therefore exhibiting a triple anion lattice. Here, the strategy consisting in incorporating a chalcogenide anion aims at raising the valence band to bring the band gap to the visible range in order to reach photoactive materials under visible light. Both the halide anion nature and the S/O ratio impact the materials' photoconductivity. While the photocurrent response is comparable to that found in the recently investigated apatite phase Pb5(VO4)3I, a short carrier lifetime is detected as well as a shift of the activity toward the visible light. This apatite series combining thiovanadate and halide-filled channels opens new perspectives in the extended field of apatites and their applications.

Stereo/regio-selective access to substituted 3-hydroxy-oxindoles with anti-proliferative assessment and in silico validation.

The manuscript focuses on a highly stereo-/regioselective approach for synthesizing a diverse array of substituted-3-hydroxy-2-oxindoles. The synthesized compounds were subsequently subjected to anti-proliferative assessment against various cell lines, including colorectal carcinoma, ovarian cancer, and human metastatic melanoma cancer. The structural characterization of the synthesized scaffolds was unambiguously confirmed using X-ray diffraction analysis. Among the synthesized compounds, one compound demonstrated exceptional potency within the series. It exhibited 1.2, 2.12, and 1.55 times greater potency than cisplatin against the HCT116, OVCAR10, and 1205Lu cell lines, respectively. These results were further supported by in vitro caspase-mediated apoptosis studies. Molecular docking studies of these compounds on the target VEGFR2 protein revealed their binding capability.

Discovery, Structure-Activity Relationships, and In Vivo Activity of Dihydropyridone Agonists of the Bile Acid Receptor TGR5.

A novel series of potent agonists of the bile acid receptor TGR5 bearing a dihydropyridone scaffold was developed from a high-throughput screen. Starting from a micromolar hit compound, we implemented an extensive structure-activity-relationship (SAR) study with the synthesis and biological evaluation of 83 analogues. The project culminated with the identification of the potent nanomolar TGR5 agonist 77A. We report the GLP-1 secretagogue effect of our lead compound ex vivo in mouse colonoids and in vivo. In addition, to identify specific features favorable for TGR5 activation, we generated and optimized a three-dimensional quantitative SAR model that contributed to our understanding of our activity profile and could guide further development of this dihydropyridone series.

Petroleum Coke Embedded in Cigarette Butts: All Waste-Derived Solar Evaporator for Effective Water Evaporation.

Solar-driven interfacial evaporation is an eco-friendly solution for tackling the impending water scarcity the world is facing in our century. In this work, a solar-driven interfacial evaporator was prepared from cigarette butts loaded with petroleum coke powder (Filter-PetCoke), a by-product of the oil refinery processes, for the improvement of the absorption of the incident solar light. A comparison between a flat 2D and a 3D evaporator with a surface composed of orderly patterned protrusions of 2.1 cm was carried out to assess the influence of the evaporator configuration on the evaporation performance. The 3D evaporator (3D Filter-PetCoke) achieved by far the best performance (evaporation rate: 1.97 ± 0.08 kg m-2 h-1 and solar conversion efficiency: 93.2 ± 5.4%) among the prepared samples (3D Filter-PetCoke, 3D Filter, 2D Filter-PetCoke, and 2D Filter). In addition, this configuration seems to be adaptable for real and more massive operation because of the geometry of the evaporator. The high efficiency was ascribed to the good heat generation of the petroleum coke and the excellent heat management of the 3D structure of the evaporator. Moreover, this evaporator was resistant to multiple repeated usages without significant efficiency loss and capable of producing drinking water from seawater and Escherichia coli (E. coli)-contaminated water. The findings in this work indicate that this evaporator is pertinent to real situations to supply safe freshwater very efficiently from chemically/biologically contaminated water.

Ferrocene-based nitroheterocyclic sulfonylhydrazones: design, synthesis, characterization and trypanocidal properties.

A series of new ferrocenyl nitroheterocyclic sulfonylhydrazones (1a-4a and 1b-2b) were prepared by the reaction between formyl (R = H) or acetyl (R = CH3) nitroheterocyclic precursors [4/5-NO2(C5H2XCOR), where X = O, S)] and ferrocenyl tosyl hydrazine [(η5-C5H5)Fe(η5-C5H4SO2-NH-NH2)]. All compounds were characterized by conventional spectroscopic techniques. In the solid state, the molecular structures of compounds 1a, 2b, and 3a were determined by single-crystal X-ray diffraction. The compounds showed an E-configuration around the C=N moiety. Evaluation of trypanocidal activity, measured in vitro against the Trypanosoma cruzi and Trypanosoma brucei strains, indicated that all organometallic tosyl hydrazones displayed activity against both parasite species with a higher level of potency toward T. brucei than T. cruzi. Moreover, the biological evaluation showed that the 5-nitroheterocyclic derivatives were more efficient trypanocidal agents than their 4-nitroheterocyclic counterparts.

Versatile Interplay of Chalcogenide and Dichalcogenide Anions in the Thiovanadate Ba7S(VS3O)2(S2)3 and Its Selenide Derivatives: Elaboration and DFT Meta-GGA Study.

Oxychalcogenides are emerging as promising alternative candidates for a variety of applications including for energy. Only few phases among them show the presence of Q-Q bonds (Q = chalcogenide anion) while they drastically alter the electronic structure and allow further structural flexibility. Four original oxy(poly)chalcogenide compounds in the system Ba-V-Q-O (Q = S, Se) were synthesized, characterized, and studied using density functional theory (DFT). The new structure type found for Ba7V2O2S13, which can be written as Ba7S(VS3O)2(S2)3, was substituted to yield three selenide derivatives Ba7V2O2S9.304Se3.696, Ba7V2O2S7.15Se5.85, and Ba7V2O2S6.85Se6.15. They represent original multiple-anion lattices and first members in the system Ba-V-Se-S-O. They exhibit in the first layer heteroleptic tetrahedra V5+S3O and isolated Q2- anions and in the second layer dichalcogenide pairs (Q2)2- with Q = S or Se. Selenide derivatives were attempted by targeting the selective substitution of isolated Q2- or (Q2)2- (in distinct layers) or both by selenide, but it systematically led to concomitant and partial substitution of both sites. A DFT meta-GGA study showed that selective substitution yields local constraints due to rigid VO3S and pairs. Experimentally, incorporation of selenide in both layers avoids geometrical mismatch and constraints. In such systems, we show that the interplay between the O/S anionic ratio around V5+, together with the presence/nature of the dichalcogenides (Q2)2- and isolated Q2-, impacts in unique manners the band gap and provides a rich background to tune the band gap and the symmetry.

A Three-Step Process to Isolate Large Quantities of Bioactive Sesquiterpene Lactones from Cichorium intybus L. Roots and Semisynthesis of Chicory STLs Standards.

Sesquiterpene lactones (STLs) are a large group of terpenoids most commonly found in plants of the Asteraceae family, e.g., in chicory plants, displaying a wide range of interesting biological activities. However, further studies on the biological potential of chicory-derived STLs and analogues are challenging as only four of these molecules are commercially available (as analytical standards), and to date, there are no published or patented simple extraction-purification processes capable of large-scale STLs isolation. In this work, we describe a novel three-step large-scale extraction and purification method for the simultaneous purification of 11,13-dihydrolactucin (DHLc) and lactucin (Lc) starting from a chicory genotype rich in these STLs and the corresponding glucosyl and oxalyl conjugated forms. After a small-scale screening on 100 mg of freeze-dried chicory root powder, the best results were achieved with a 17 h water maceration at 30 °C. With these conditions, we managed to increase the content of DHLc and Lc, at the same time favoring the hydrolysis of their conjugated forms. On a larger scale, the extraction of 750 g of freeze-dried chicory root powder, followed by a liquid-liquid extraction step and a reversed-phase chromatography, allowed the recovery of 642.3 ± 76.3 mg of DHLc and 175.3 ± 32.9 mg of Lc. The two pure STLs were subsequently used in the context of semisynthesis to generate analogues for biological evaluation as antibacterial agents. In addition, other described chicory STLs that are not commercially available were also synthesized or extracted to serve as analytical standards for the study. In particular, lactucin-oxalate and 11,13-dihydrolactucin-oxalate were synthesized in two steps starting from Lc and DHLc, respectively. On the other hand, 11ß,13-dihydrolactucin-glucoside was obtained after a MeOH/H2O (70/30) extraction, followed by a liquid-liquid extraction step and a reversed-phase chromatography. Together, this work will help facilitate the evaluation of the biological potential of chicory-derived STLs and their semisynthetic analogues.

Photoelectrochemical properties of copper pyrovanadate (Cu2V2O7) thin films synthesized by pulsed laser deposition.

Polymorphic phases of copper pyrovanadate (α- and ß-Cu2V2O7) were synthesized by solid state reaction and the mechanisms governing the phase transitions have been highlighted by the ThermoGravimetric Analysis (TGA) and the Differential Scanning Calorimetry (DSC). The thermal evolution of the lattice parameters was determined by high temperature X-ray Diffraction revealing negative thermal expansion coefficients. The thermogravimetric analysis coupled with differential scanning calorimetry was also used to determine the optimal conditions to obtain a dense target in order to produce thin films by the Pulsed Laser Deposition (PLD) technique. Thin films elaborated under different oxygen pressures and temperatures exhibit a ß-Cu2V2O7 polycrystalline phase and their band gap indicates absorption in the visible range. These oxides can be used as photoanodes and their photoelectrochemical properties were studied for both bulk (α-Cu2V2O7) and thin films (ß-Cu2V2O7), as a function of the wavelength and/or intensity of the luminous flux. The best photocurrent efficiency was obtained under 450 nm illumination. Moreover, in the case of thin films, we have observed a linear evolution of the current density with the luminous flux. Finally, the photostability of thin films was measured and shows a reduction in the photocurrent of 8% after 1 h of measurement. This photocorrosion phenomenon was also highlighted by the elemental mapping performed on thin films by Scanning Electron Microscopy (SEM) coupled with Energy Dispersive X-ray Spectrometry (EDS).

Advances on Microsupercapacitors: Real Fast Miniaturized Devices toward Technological Dreams for Powering Embedded Electronics?

Microsupercapacitors (MSCs) have emerged as the next generation of electrochemical energy storage sources for powering miniaturized embedded electronic and Internet of Things devices. Despite many advantages such as high-power density, long cycle life, fast charge/discharge rate, and moderate energy density, MSCs are not at the industrial level in 2022, while the first MSC was published more than 20 years ago. MSC performance is strongly correlated to electrode material, device configuration, and the used electrolyte. There are therefore many questions and scientific/technological locks to be overcome in order to raise the technological readiness level of this technology to an industrial stage: the type of electrode material, device topology/configuration, and use of a solid electrolyte with high ionic conductivity and photopatternable capabilities are key parameters that we have to optimize in order to fulfill the requirements. Carbon-based, pseudocapacitive materials such as transition metal oxide, transition metal nitride, and MXene used in symmetric or asymmetric configurations are extensively investigated. In this Review, the current progress toward the fabrication of MSCs is summarized. Challenges and prospectives to improve the performance of MSCs are discussed.

Development of a TiO2/Sepiolite Photocatalyst for the Degradation of a Persistent Organic Pollutant in Aqueous Solution.

A clay-based TiO2 nanocomposite material was synthesized by a facile method, to investigate its structure and photocatalytic efficiency. The supported TiO2 nanoparticles were generated using a sol-gel method, and subsequently, mixed with a suspension of sepiolite. The material was recovered in powder form (Mc-80) and then calcined to properly arrange the crystal lattice of the TiO2 particles for use in heterogeneous photocatalysis (Mc-80-500). A powder X-ray diffractogram of Mc-80-500 revealed a dispersion of anatase and rutile phase TiO2 particles on the clay surface, exhibiting a size in the order of 4-8 nm. TEM images of Mc-80-500 confirmed the presence of isolated TiO2 beads on the surface of the fibrous sepiolite. The specific surface area of Mc-80-500 was larger than that of raw sepiolite and that of free TiO2 nanoparticles. Mc-80-500 was found to be more efficient in heterogeneous photocatalysis compared to other TiO2 materials based on sepiolite. Total depollution of a reactive dye (Orange G) was achieved after 1 h irradiation time, which is relatively quick compared to previous reports. The photocatalyst material can be washed with distilled water without chemical additives or calcination, and can be reused several times for photocatalysis, without loss of efficiency.

Ultimate mechanical properties of enstatite.

The ultimate mechanical properties of MgSiO3 orthoenstatite (OEN), as characterized here by the ideal strengths, have been calculated under tensile and shear loadings using first-principles calculations. Both ideal tensile strength (ITS) and shear strength (ISS) are computed by applying homogeneous strain increments along high-symmetry directions ([100], [010], and [001]) and low index shear planes ((100), (010), and (001)) of the orthorhombic lattice. We show that the ultimate mechanical properties of OEN are highly anisotropic during tensile loading, with ITS ranging from 4.5 GPa along [001] to 8.7 GPa along [100], and quite isotropic during the shear loading with ISS ranging from 7.4 to 8.9 GPa. During tensile test along [100] and [001], a modified structure close to OEN has been found. This modified structure is more stable than OEN under stress (or strain). We have characterized its elastic and ultimate properties under tensile loading. With ITS ranging from 7.6 GPa along [010] to 25.6 GPa along [001], this modified structure appears to be very anisotropic with exceptional strength along [001]. Supplementary Information: The online version contains supplementary material available at 10.1007/s00269-022-01206-5.

Naphthoquinone-induced arylation inhibits Sirtuin 7 activity.

Natural or synthetic naphthoquinones have been identified to interfere with biological systems and, in particular, exhibit anticancer properties. As redox cyclers, they generate reactive oxygen species in cells and, as electrophiles, they react with nucleophiles, mainly thiols, and form covalent adducts. To further decipher the molecular mechanism of action of naphthoquinones in human cells, we analyzed their effects in HeLa cells. First, we demonstrated that the naphthoquinones menadione and plumbagin inhibited the nucleolar NAD+-dependent deacetylase Sirtuin 7 in vitro. As assessed by their inhibition of rDNA transcription, pre-rRNA processing and formation of etoposide-induced 53BP1 foci, menadione and plumbagin also inhibited Sirtuin 7 catalytic activity in vivo. Second, we established that when sulfhydryl arylation by menadione or plumbagin was prevented by the thiol reducing agent N-acetyl-L-cysteine, the inhibition of Sirtuin 7 catalytic activity was also blocked. Finally, we discuss how inhibition of Sirtuin 7 might be crucial in defining menadione or plumbagin as anti-tumor agents that can be used in combination with other anti-tumor strategies.

3D LiMn2 O4 Thin Film Deposited by ALD: A Road toward High-Capacity Electrode for 3D Li-Ion Microbatteries.

Miniaturized electronics suffer from a lack of energy autonomy. In that context, the fabrication of lithium-ion solid-state microbatteries with high performance is mandatory for powering the next generation of portable electronic devices. Here, the fabrication of a thin film positive electrode for 3D Li-ion microbatteries made by the atomic layer deposition (ALD) method and in situ lithiation step is demonstrated. The 3D electrodes based on spinel LiMn2 O4 films operate at high working potential (4.1 V vs Li/Li+ ) and are capable of delivering a remarkable surface capacity (≈180 µAh cm-2 ) at low C-rate while maintaining more than 40 µAh cm-2 at C/2 (time constant = 2 h). Both the thickness of the electrode material and the 3D gain of the template are carefully tuned to maximize the electrode performance. Advanced characterization techniques such as transmission electron and X-ray transmission microscopies are proposed as perfect tools to study the conformality of the deposited films and the interfaces between each layer: no interdiffusion or segregation are observed. This work represents a major issue towards the fabrication of 3D-lithiated electrode by ALD-without any prelithiation step by electrochemical technique-making it an attractive solution for the fabrication of 3D Li-ion solid-state microbatteries with semiconductor processing methods.

An unusual O2-/F- distribution in the new pyrochlore oxyfluorides: Na2B2O5F2 (B = Nb, Ta).

Two new oxyfluorides with a pyrochlore-type structure, Na2Nb2O5F2 and Na2Ta2O5F2, have been obtained, for which the XRD crystallographic study coupled with 19F solid state NMR reveals an unusual O/F distribution. Both materials are n-type semiconductors exhibiting photoconductive properties.

In Situ Liquid Electrochemical TEM Investigation of LiMn1.5 Ni0.5 O4 Thin Film Cathode for Micro-Battery Applications.

Micro-batteries are attractive miniaturized energy devices for new Internet of Things applications, but the lack of understanding of their degradation process during cycling hinders improving their performance. Here focused ion beam (FIB)-lamella from LiMn1.5 Ni0.5 O4 (LMNO) thin-film cathode is in situ cycled in a liquid electrolyte inside an electrochemical transmission electron microscope (TEM) holder to analyze structural and morphology changes upon (de)lithiation processes. A high-quality electrical connection between the platinum (Pt) current collector of FIB-lamella and the microchip's Pt working electrode is established, as confirmed by local two-probe conductivity measurements. In situ cyclic voltammetry (CV) experiments show two redox activities at 4.41 and 4.58/4.54 V corresponding to the Ni2+/3+ and Ni3+/4+ couples, respectively. (S)TEM investigations of the cycled thin-film reveal formation of voids and cracks, loss of contact with current collector, and presence of organic decomposition products. The 4D STEM ASTAR technique highlights the emergence of an amorphization process and a decrease in average grain size from 20 to 10 nm in the in situ cycled electrode. The present findings, obtained for the first time through the liquid electrochemical TEM study, provide several insights explaining the capacity fade of the LMNO thin-film cathode typically observed upon cycling in a conventional liquid electrolyte.

Lactide Lactone Chain Shuttling Copolymerization Mediated by an Aminobisphenolate Supported Aluminum Complex and Al(OiPr)3: Access to New Polylactide Based Block Copolymers.

The chain shuttling ring-opening copolymerization of l-lactide with ε-caprolactone has been achieved using two aluminum catalysts presenting different selectivities and benzyl alcohol as chain transfer agent. A newly synthesized aminobisphenolate supported aluminum complex affords the synthesis of lactone rich poly(l-lactide-co-lactone) statistical copolymeric blocks, while Al(OiPr)3 produces semicrystalline poly(l-lactide) rich blocks. Transalkoxylation is shown to operate efficiently. The crystalline ratios and glass transition temperatures of these new classes of polylactide based block copolymers can be tuned by adjusting the catalysts and the comonomers ratio.