Humidity-Induced Degradation Processes of Halide Perovskites Unveiled by Correlative Analytical Electron Microscopy.

Improving the stability of lead halide perovskite solar cells (PSCs) for industrialization is currently a major challenge. It is shown that moisture induces changes in global PSC performance, altering the nature of the absorber through phase transition or segregation. Understanding how the material evolves in a wet environment is crucial for optimizing device performance and stability. Here, the chemical and structural evolution of state-of-the-art hybrid perovskite thin-film Cs0.05 (MA0.15 FA0.85 )0.95 Pb(I0.84 Br0.16 )3 (CsMAFA) is investigated after aging under controlled humidity with analytical characterization techniques. The analysis is performed at different scales through Photoluminescence, X-ray Diffraction Spectroscopy, Cathodoluminescence, Selected Area Electron Diffraction, and Energy Dispersive X-ray Spectroscopy. From the analysis of the degradation products from the perovskite layer and by the correlation of their optical and chemical properties at a microscopic level, different phases such as lead-iodide (PbI2 ), inorganic mixed halide CsPb(I0.9 Br0.1 )3 and lead-rich CsPb2 (I0.74 Br0.26 )5 perovskite are evidenced. These phases demonstrate a high degree of crystallinity that induces unique geometrical shapes and drastically affects the optoelectronic properties of the thin film. By identifying the precise nature of these specific species, the multi-scale approach provides insights into the degradation mechanisms of hybrid perovskite materials, which can be used to improve PSC stability.

Influence of X-Ray Irradiation During Photoemission Studies on Halide Perovskite-Based Devices.

Metal halide perovskites (MHPs) are semiconductors with promising application in optoelectronic devices, particularly, in solar cell technologies. The chemical and electronic properties of MHPs at the surface and interfaces with adjacent layers dictate charge transfer within stacked devices and ultimately the efficiency of the latter. X-ray photoelectron spectroscopy is a powerful tool to characterize these material properties. However, the X-ray radiation itself can potentially affect the MHP and therefore jeopardize the reliability of the obtained information. In this work, the effect of X-ray irradiation is assessed on Cs0.05 MA0.15 FA0.8 Pb(I0.85 Br0.15 )3  (MA for CH3 NH3 , and FA for CH2 (NH2 )2 ) MHP thin-film samples in a half-cell device. There is a comparison of measurements acquired with synchrotron radiation and a conventional laboratory source for different times. Changes in composition and core levels binding energies are observed in both cases, indicating a modification of the chemical and electronic properties. The results suggest that changes observed over minutes with highly brilliant synchrotron radiation are likely occurring over hours when working with a lab-based source providing a lower photon flux. The possible degradation pathways are discussed, supported by steady-state photoluminescence analysis. The work stresses the importance of beam effect assessment at the beginning of XPS experiments of MHP samples.

Assessment and comparison of image quality between two real-time sequences for dynamic MRI of distal joints at 3.0 Tesla.

BACKGROUND: Real-time sequences allow functional evaluation of various joint structures during a continuous motion and help understand the pathomechanics of underlying musculoskeletal diseases. PURPOSE: To assess and compare the image quality of the two most frequently used real-time sequences for joint dynamic magnetic resonance imaging (MRI), acquired during finger and ankle joint motion. MATERIAL AND METHODS: A real-time dynamic acquisition protocol, including radiofrequency (RF)-spoiled and balanced steady-state free precession (bSSFP) sequences, optimized for temporal resolution with similar spatial resolution, was performed using a 3.0-T MRI scanner on 10 fingers and 12 ankles from healthy individuals during active motion. Image quality criteria were evaluated on each time frame and compared between these two sequences. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were determined and compared from regions of interest placed on cortical bone, tendon, fat, and muscle. Visualization of anatomical structures and overall image quality appreciation were rated by two radiologists using a 0-10 grading scale. RESULTS: Mean CNR was significantly higher with bSSFP sequence compared to RF-spoiled sequence. The grading score was in the range of 5-9.3 and was significantly higher with RF-spoiled sequence for bone and joint evaluation and overall image appreciation on the two joints. The standard deviation for SNR, CNR, and grading score during motion was smaller with RF-spoiled sequence for both the joints. The inter-reader reliability was excellent (>0.75) for evaluating anatomical structures in both sequences. CONCLUSION: A RF-spoiled real-time sequence is recommended for the in vivo clinical evaluation of distal joints on a 3.0-T MRI scanner.

In-Depth Chemical and Optoelectronic Analysis of Triple-Cation Perovskite Thin Films by Combining XPS Profiling and PL Imaging.

The investigation of chemical and optoelectronic properties of halide perovskite layers and associated interfaces is crucial to harness the full potential of perovskite solar cells. Depth-profiling photoemission spectroscopy is a primary tool to study the chemical properties of halide perovskite layers at different scales from the surface to the bulk. The technique employs ionic argon beam thinning that provides accurate layer thicknesses. However, there is an urgent need to corroborate the reliability of data on chemical properties of halide perovskite thin films to better assess their stability. The present study addresses the question of the Ar+ sputtering thinning on the surface chemical composition and the optoelectronic properties of the triple-cation mixed-halide perovskite by combining X-ray photoemission spectroscopy (XPS) and photoluminescence (PL) spectroscopy. First, XPS profiling is performed by Ar+ beam sputtering on a half-cell: glass/FTO/c-TiO2/perovskite. The resulting profiles show a very homogeneous and reproducible element distribution until near the buried interface; therefore, the layer is considered as quasihomogeneous all over its thickness, and the sputtering process is stable. Second, we evaluated a set of thinned perovskite layers representative of selected steps along the profile by means of PL imaging optical measurements in both steady-state and transient regimes to assess possible perturbation of the optical properties from the surface to bulk. Obtained PL spectra inside the resulting craters show no peak shift nor phase segregation. Accordingly, the transient PL measurements do not reveal any changes of the surface recombination rate in the sputtered areas. This demonstrates that there is no cumulative effect of sputtering nor drastic chemical and optoelectronic modifications, validating the determination of the in-depth composition of the perovskite layer. Combining XPS profiling with PL characterization can be a precise tool to be applied for an extensive study of the multiple layers and mixed organic/inorganic interfaces of photovoltaic devices.

Industrially Compatible Fabrication Process of Perovskite-Based Mini-Modules Coupling Sequential Slot-Die Coating and Chemical Bath Deposition.

To upscale the emerging perovskite photovoltaic technology to larger-size modules, industrially relevant deposition techniques need to be developed. In this work, the deposition of tin oxide used as an electron extraction layer is established using chemical bath deposition (CBD), a low-cost and solution-based fabrication process. Applying this simple low-temperature deposition method, highly homogeneous SnO2 films are obtained in a reproducible manner. Moreover, the perovskite layer is prepared by sequentially slot-die coating on top of the n-type contact. The symbiosis of these two industrially relevant deposition techniques allows for the growth of high-quality dense perovskite layers with large grains. The uniformity of the perovskite film is further confirmed by scanning electron microscopy (SEM)/scanning transmission electron microscopy (STEM) analysis coupled with energy dispersive X-ray spectroscopy (EDX) and cathodoluminescence measurements allowing us to probe the elemental composition at the nanoscale. Perovskite solar cells fabricated from CBD SnO2 and slot-die-coated perovskite show power conversion efficiencies up to 19.2%. Furthermore, mini-modules with an aperture area of 40 cm2 demonstrate efficiencies of 17% (18.1% on active area).

N3 (> 6 cm) squamous cell carcinoma of the head and neck: outcomes and predictive factors in 104 patients.

OBJECTIVE: To report outcome and predictive factors in patients with N3 (> 6 cm) non-metastatic locally advanced head and neck squamous cell carcinoma (LAHNSCC) treated with a conservative approach or with initial surgery. METHODS: 104 patients were included: 69 treated with radiotherapy (RT) ± chemotherapy (CT) and 35 with nodal surgery with or without primary tumour resection, which was completed in 30 patients by adjuvant RT ± CT. Positron-emission tomography-computed tomography (PET-CT) guided surveillance after RT ± CT was standard. RESULTS: Two-year overall survival (OS) and locoregional control (LRC) were 39.4% and 37.5%, respectively. In univariate analysis, body mass index (BMI), performance status (PS), p16 status and haemoglobin value influenced OS and disease-free survival (DFS). In multivariate analysis, p16 positive status and BMI ≥ 25 remained independent prognostic factors for better OS (p = 0.023) and DFS (p = 0.002). Only under/normal weight remained an independent and adverse significant prognostic factor in multivariate analysis for regional control (RC). Patients treated with primary RT ± CT had slightly better 2-year OS (43.5% versus 33.3%, p = 0.31). CONCLUSIONS: Patients with N3 LAHNSCC have poor prognosis, but long term LRC is achievable, especially in overweight patients and those with a good PS.

An LDV based method to quantify the error of PC-MRI derived Wall Shear Stress measurement.

Wall Shear Stress (WSS) has been demonstrated to be a biomarker of the development of atherosclerosis. In vivo assessment of WSS is still challenging, but 4D Flow MRI represents a promising tool to provide 3D velocity data from which WSS can be calculated. In this study, a system based on Laser Doppler Velocimetry (LDV) was developed to validate new improvements of 4D Flow MRI acquisitions and derived WSS computing. A hydraulic circuit was manufactured to allow both 4D Flow MRI and LDV velocity measurements. WSS profiles were calculated with one 2D and one 3D method. Results indicated an excellent agreement between MRI and LDV velocity data, and thus the set-up enabled the evaluation of the improved performances of 3D with respect to the 2D-WSS computation method. To provide a concrete example of the efficacy of this method, the influence of the spatial resolution of MRI data on derived 3D-WSS profiles was investigated. This investigation showed that, with acquisition times compatible with standard clinical conditions, a refined MRI resolution does not improve WSS assessment, if the impact of noise is unreduced. This study represents a reliable basis to validate with LDV WSS calculation methods based on 4D Flow MRI.

Light-Induced Passivation in Triple Cation Mixed Halide Perovskites: Interplay between Transport Properties and Surface Chemistry.

Mixed halide perovskites have attracted a strong interest in the photovoltaic community as a result of their high power conversion efficiency and the solid opportunity to realize low-cost and industry-scalable technology. Light soaking represents one of the most promising approaches to reduce non-radiative recombination processes and thus to optimize device performances. Here, we investigate the effects of 1 sun illumination on state-of-the-art triple cation halide perovskite thin films Cs0.05(MA0.14, FA0.86)0.95 Pb (I0.84, Br0.16)3 by a combined optical and chemical characterization. Competitive passivation and degradation effects on perovskite transport properties have been analyzed by spectrally and time-resolved quantitative imaging luminescence analysis and by X-ray photoemission spectroscopy (XPS). We notice a clear improvement of the optoelectronic properties of the material, with a increase of the quasi fermi level splitting and a corresponding decrease of methylammonium MA+ for short (up to 1 h) light soaking time. However, after 5 h of light soaking, phase segregation and in-depth oxygen penetration lead to a decrease of the charge mobility.

Integration of 18-FDG PET/CT in the Initial Work-Up to Stage Head and Neck Cancer: Prognostic Significance and Impact on Therapeutic Decision Making.

Background: The objective of this study was to assess the therapeutic and prognostic impact of integrating18F-fluorodeoxyglucose (18-FDG) positron emission tomography (PET)/computed tomography (CT) into work-up (WU) at initial staging of patients with head and neck squamous cell carcinoma (HNSCC). Method: 477 consecutive patients (414M/63F, mean age 62.3 ± 9.7 years) with newly diagnosed HNSCC who underwent pre-treatment 18-FDG PET/CT were retrospectively included. The 18-FDG PET/CT stage (sPET) was compared to the conventional work-up stage (sCWU). A group of cancer specialists determined whether integrating PET/CT into WU at initial staging had an impact on the therapeutic decision, classifying the clinical impact as high (change in therapeutic modality), medium (change in the radiotherapy or surgical procedure), or low (modification of TNM staging and/or detection of synchronous cancer without high or medium impact). Three-year overall survival (OS) was considered as primary endpoint of the prognostic analysis. Results: 18-FDG PET/CT had a clinical impact in 221 patients (46.3%) with a medium or high impact on management in 94 (19.5%) patients. Medium and high impact of 18-FDG PET/CT was statistically equivalent between sCWU-stage I/II and III/IV subgroups (p = 0.02). 42 patients were PET/CT-upstaged from early stage I/II to advanced stage III/IV and had a significantly lower 3-year OS than those with concordant CWU and 18-FDG PET/CT early stage (54.8 vs. 82.6%, p = 0.001). Conclusion: This study demonstrated that implementing 18-FDG PET/CT in the initial WU of HNSCC provides valuable staging information with a better prognostic stratification. Patient management was modified for any disease stage, even for early stage I-II, with consequences on survival.

Influence of Environment and Light-Stress on the Optoelectronic Properties of Triple-Cation Perovskite Thin Films.

In this work, we study the transport properties of triple-cation halide perovskite thin films and their evolution when exposed to air or vacuum and after light-soaking. Transport parameters were investigated by steady-state dark and photocurrent methods as well as by the steady-state photocarrier grating experiment (SSPG) from which the ambipolar diffusion length of thin film materials is estimated. Combined with other characterization measurements, such as photoluminescence and Fourier transform photocurrent spectroscopy, these techniques demonstrate that air plays an important role in the passivation of the surface trap states of the perovskite films. The competition between passivation and degradation of the films under light-soaking was also deeply investigated. Moreover, we show that the degradation of the transport parameters upon light-soaking could be linked mainly to a degradation of the carrier mobility instead of their lifetime.

Nanometric NaYF4 as an Unconventional Support for Gold Catalysts for Oxidation Reactions.

The metal-support interaction plays an important role in gold catalysis. We employ here crystalline cubic (α-) and hexagonal (ß-) phases of heterometallic fluoride NaYF4 nanoparticles (NPs), obtained by the decomposition of a single source precursor [NaY(TFA)4(diglyme)] (TFA = trifluoroacetate), as nonoxide supports for gold catalysts. Using an isostructural gadolinium analogue, we also obtained doped α-NaYF4:Gd3+ and ß-NaYF4:Gd3+ NPs. A successful deposition of ∼1% by weight gold NPs of average size 5-6.5 nm on these doped and undoped metal fluorides using HAuCl4·3H2O afforded Au/NaYF4 catalysts which were thoroughly characterized by using several physicochemical techniques such as X-ray diffraction, Brunauer-Emmett-Teller analysis, high-resolution transmission electron microscopy, energy-dispersive X-ray spectrometry, and X-ray photoelectron spectroscopy. A comparative study of the above catalysts for different oxidation reactions show that while for the aerobic oxidation of trans-stilbene in solution phase, they are either better (in terms of stilbene conversion) or at par (in terms of trans-stilbene oxide yield) in comparison to the reference catalyst Au/TiO2 of the World Gold Council, their activity toward CO oxidation reactions in gas phase remains much less than that of gold catalysts supported on metal oxides.

Dispersion relation of the collective excitations in a resonantly driven polariton fluid.

Exciton-polaritons in semiconductor microcavities constitute the archetypal realization of a quantum fluid of light. Under coherent optical drive, remarkable effects such as superfluidity, dark solitons or the nucleation of vortices have been observed, and can be all understood as specific manifestations of the condensate collective excitations. In this work, we perform a Brillouin scattering experiment to measure their dispersion relation [Formula: see text] directly. The results, such as a speed of sound which is apparently twice too low, cannot be explained upon considering the polariton condensate alone. In a combined theoretical and experimental analysis, we demonstrate that the presence of an excitonic reservoir alongside the polariton condensate has a dramatic influence on the characteristics of the quantum fluid, and explains our measurement quantitatively. This work clarifies the role of such a reservoir in polariton quantum hydrodynamics. It also provides an unambiguous tool to determine the condensate-to-reservoir fraction in the quantum fluid, and sets an accurate framework to approach ideas for polariton-based quantum-optical applications.

High Versatility and Stability of Mechanochemically Synthesized Halide Perovskite Powders for Optoelectronic Devices.

We show that mechanochemically synthesized halide perovskite powders from a ball milling approach can be employed to fabricate a variety of lead halide perovskites with exceptional intrinsic stability. Our MAPbI3 powder exhibits higher thermal stability than conventionally processed thin films, without degradation after more than two and a half years of storage and only negligible degradation after heat treatment at 220 °C for 14 h. We further show facile recovery strategies of nonphase-pure powders by simple remilling or mild heat treatment. Moreover, we demonstrate the mechanochemical synthesis of phase-pure mixed perovskite powders, such as (Cs0.05FA0.95PbI3)0.85(MAPbBr3)0.15, from either the individual metal and organic halides or from readily prepared ternary perovskites, regardless of the precursor phase purity. Adding potassium iodide (KI) to the milling process successfully passivated the powders. We also succeeded in preparing a precursor solution on the basis of the powders and obtained uniform thin films for integration into efficient perovskite solar cells from spin-coating this solution. We find the KI passivation remains in the devices, leading to improved performance and significantly reduced hysteresis. Our work thus demonstrates the potential of mechanochemically synthesized halide perovskite powders for long-time storage and upscaling, further paving the way toward commercialization of perovskite-based optoelectronic devices.

Patent Foramen Ovale and Ischemic Stroke in Patients With Pulmonary Embolism: A Prospective Cohort Study.

Background: Pulmonary embolism (PE) is associated with increased risk for ischemic stroke, but the underlying mechanism remains unclear. The authors hypothesized that paradoxical embolism through patent foramen ovale (PFO) should be the main mechanism. Objective: To determine the frequency of recent ischemic stroke in patients with symptomatic PE according to whether PFO was detected. Design: Prospective cohort study with masked assessment of stroke outcomes. (ClinicalTrials.gov: NCT01216423). Setting: 4 French hospital centers. Participants: 361 consecutive patients with symptomatic acute PE from 13 November 2009 through 21 December 2015. Intervention: Systematic contrast transthoracic echocardiography (TTE) and cerebral magnetic resonance imaging (MRI) within 7 days after enrollment. Measurements: Recent symptomatic or silent ischemic stroke was diagnosed on the basis of clinical examination and cerebral MRI showing a hypersignal on the trace diffusion-weighted image with reduction or pseudonormalization of apparent diffusion coefficient. Results: Contrast TTE was conclusive in 324 of 361 patients and showed PFO in 43 patients (13%). The median age was 66 years (interquartile range, 54 to 77 years). In total, 51% of patients (145/284) had associated deep venous thrombosis, 91% (279/306) had cardiovascular risk factors, and 10% (16/151) presented with arrhythmia (no difference between PFO and non-PFO groups). Cerebral MRI was conclusive in 315 patients. Recent ischemic stroke was more frequent in the PFO group than in the non-PFO group (9 of 42 patients [21.4%] vs. 15 of 273 patients [5.5%]; difference in proportions, 15.9 percentage points [95% CI, 4.7 to 30.7 percentage points]). Limitation: Because of inconclusive contrast TTE or MRI, 46 patients were excluded from analysis. Conclusion: Frequency of recent ischemic stroke in patients with symptomatic PE was higher in patients with PFO than in those without PFO. This finding supports the hypothesis that paradoxical embolism is an important mechanism of ischemic stroke in patients with PFO. Primary Funding Source: French Ministry of Health.

Quantitative optical assessment of photonic and electronic properties in halide perovskite.

The development of high efficiency solar cells relies on the management of electronic and optical properties that need to be accurately measured. As the conversion efficiencies increase, there is a concomitant electronic and photonic contribution that affects the overall performances. Here we show an optical method to quantify several transport properties of semiconducting materials and the use of multidimensional imaging techniques allows decoupling and quantifying the electronic and photonic contributions. Example of application is shown on halide perovskite thin film for which a large range of transport properties is given in the literature. We therefore optically measure pure carrier diffusion properties and evidence the contribution of optical effects such as the photon recycling as well as the photon propagation where emitted light is laterally transported without being reabsorbed. This latter effect has to be considered to avoid overestimated transport properties such as carrier mobility, diffusion length or diffusion coefficient.

Atmosphere-dependent stability and mobility of catalytic Pt single atoms and clusters on γ-Al2O3.

Atomically dispersed metals promise the ultimate catalytic efficiency, but their stabilization onto suitable supports remains challenging owing to their aggregation tendency. Focusing on the industrially-relevant Pt/γ-Al2O3 catalyst, in situ X-ray absorption spectroscopy and environmental scanning transmission electron microscopy allow us to monitor the stabilization of Pt single atoms under O2 atmosphere, as well as their aggregation into mobile reduced subnanometric clusters under H2. Density functional theory calculations reveal that oxygen from the gas phase directly contributes to metal-support adhesion, maximal for single Pt atoms, whereas hydrogen only adsorbs on Pt, and thereby leads to Pt clustering. Finally, Pt cluster mobility is shown to be activated at low temperature and high H2 pressure. Our results highlight the crucial importance of the reactive atmosphere on the stability of single-atom versus cluster catalysts.

Prognostic value of textural indices extracted from pretherapeutic 18-F FDG-PET/CT in head and neck squamous cell carcinoma.

BACKGROUND: This study aimed at assessing the prognostic value of textural indices extracted from 18F-fluorodeoxyglucose positron-emission tomography (FDG-PET)/CT in a large cohort of patients with head and neck squamous cell carcinomas (HNSCC) of any anatomic subsite and staging. METHODS: Consecutive patients with HNSCC referred for a pretreatment FDG-PET/CT were retrospectively included and followed up for a minimum of 2 years. Standardized uptake value, metabolic tumor volume (MTV), and textural indices were calculated using LIFEx software. Prognostic significance of parameters was assessed in univariate and multivariate analysis. RESULTS: Textural indices were extracted in 284 patients (mean age = 63.7±9.6 years). In univariate analysis, MTV and 4 textural indices-Correlation, Entropy, Energy, and Coarseness-were significantly correlated with overall survival (OS). In multivariate analysis, MTV (P = .008) and Correlation (P = .028) remained independently correlated to OS. CONCLUSION: This study showed that MTV and 1 textural index extracted from pretherapeutic FDG-PET/CT (Correlation) were independent prognostic factors of OS in patients with HNSCC.

Highly efficient MoOx-free semitransparent perovskite cell for 4 T tandem application improving the efficiency of commercially-available Al-BSF silicon.

In this work, the fabrication of MoOx-free semitransparent perovskite solar cells (PSC) with Power Conversion Efficiencies (PCE) up to 15.7% is reported. Firstly, opaque PSCs up to 19.7% were fabricated. Then, the rear metal contact was replaced by a highly transparent and conductive indium tin oxide (ITO) film, directly sputtered onto the hole selective layer, without any protective layer between Spiro-OMeTAD and rear ITO. To the best of our knowledge, this corresponds to the most efficient buffer layer-free semitransparent PSC ever reported. Using time-resolved photoluminescence (TRPL) technique on both sides of the semitransparent PSC, Spiro-OMeTAD/perovskite and perovskite/TiO2 interfaces were compared, confirming the great quality of Spiro-OMeTAD/perovskite interface, even after damage-less ITO sputtering, where degradation phenomena result less important than for perovskite/TiO2 one. Finally, a 4-terminal tandem was built combining semitransparent PSC with a commercially-available Aluminium Back Surface Field (Al-BSF) silicon wafer. That silicon wafer presents PCE = 19.52% (18.53% after being reduced to cell size), and 5.75% once filtered, to generate an overall 4 T tandem efficiency of 21.18% in combination with our champion large semitransparent PSC of 15.43%. It means an absolute increase of 1.66% over the original silicon wafer efficiency and a 2.65% over the cut Si cell.

Spin polarized semimagnetic exciton-polariton condensate in magnetic field.

Owing to their integer spin, exciton-polaritons in microcavities can be used for observation of non-equilibrium Bose-Einstein condensation in solid state. However, spin-related phenomena of such condensates are difficult to explore due to the relatively small Zeeman effect of standard semiconductor microcavity systems and the strong tendency to sustain an equal population of two spin components, which precludes the observation of condensates with a well defined spin projection along the axis of the system. The enhancement of the Zeeman splitting can be achieved by introducing magnetic ions to the quantum wells, and consequently forming semimagnetic polaritons. In this system, increasing magnetic field can induce polariton condensation at constant excitation power. Here we evidence the spin polarization of a semimagnetic polaritons condensate exhibiting a circularly polarized emission over 95% even in a moderate magnetic field of about 3 T. Furthermore, we show that unlike nonmagnetic polaritons, an increase on excitation power results in an increase of the semimagnetic polaritons condensate spin polarization. These properties open new possibilities for testing theoretically predicted phenomena of spin polarized condensate.