Exploring the use of the desirability function to optimize the separation of oligonucleotide impurities by ion pair-RP LCMS.

The use of small alkyl amines as ion pair reagents permits enhanced separation of impurities of phosphate diester oligonucleotides, which can be beneficial to quality control applications, and aid elucidation of the mechanisms of impurity formation. In general, however, separation of the individual components that comprise the majority of oligonucleotide impurities requires development of several independent chromatographic methods. Ideally, a single method capable of separating the individual components of all impurity classes would be developed. The mathematical concept of the desirability function has been explored here for its ability to determine the combination of experimental factors that result in a single, globally optimized chromatographic method. The optimized mobile phase, consisting of 1 mM propylamine (PA), 30 mM ammonium bicarbonate (ABC), and 1 mM octanoic acid (C8A), produced excellent agreement between measured and predicted peak resolution values for a set of n - 1 impurities. The relative importance of the mobile phase constituents on the mechanism of separation has been discussed. The approach holds great promise for the improved separation of components in complex chromatographic systems.

Separation of phosphorothioate oligonucleotide impurities by WAX HPLC under high organic content elution conditions.

The separation of impurities in phosphorothioate diester (PS) oligonucleotides is complicated by (1) the presence of a very large number of diastereoisomers, e.g., 219 for a 20-mer oligonucleotide, (2) peak broadening due to the hydrophobic character of the sulfur atom, and (3) the chemical similarity of the impurities to the parent oligonucleotide and each other. Further difficulties arise due to the chemical nature of oligonucleotides, which display a complex mixture of ionic, hydrophobic, H-bonding, and other functionalities. To minimize hydrophobic interactions and peak broadening due to the PS modification, we have developed a novel method that combines a weak anion exchange (WAX) column with a mobile phase elution system designed to maximize separation by a single ionic/electrostatic interaction. We found that although chaotropes are helpful, the most significant beneficial effect of the hydrophilic WAX column is that high-organic, low-salt mobile phase is required for product elution. Separations are also benefitted by pH gradient effects on stationary phase electrostatic potential and analyte ionization. An extraordinary degree of separation is achieved by the new WAX method in comparison to SAX (strong anion exchange) chromatography. For the first time, the extent of deamination of PS oligonucleotides is directly determined by a chromatography-only method. The approach, representative results, and the mechanisms of separation are discussed.

Characterizing the Diastereoisomeric Distribution of Phosphorothioate Oligonucleotides by Metal Ion Complexation Chromatography, In-Series Reversed Phase-Strong Anion Exchange Chromatography, and 31P NMR.

Replacement of a non-bridging oxygen atom of the phosphate diester linkage of an oligonucleotide by sulfur conveys pharmacokinetic benefits, such as increased nuclease resistance and enhanced protein binding. Substitution renders the internucleotide linkages chiral, and so phosphorothioate diester (PS) oligonucleotides comprise complex mixtures of diastereoisomers. Currently, chromatographic separation of individual diastereoisomers is limited to oligonucleotides that contain no more than about four or five PS linkages. The development of therapeutic PS oligonucleotides, which often contain >15 PS linkages, would be greatly aided by methods useful for assessing batch-to-batch stereo-reproducibility. To this effect, the relative sensitivities of metal ion complexation chromatography (MICC), in-series reversed phase-strong anion exchange chromatography (RP-SAX), and 31P NMR toward changes in the diastereoisomeric distributions of therapeutic PS oligonucleotides were compared. Model oligonucleotides synthesized under conditions known to impact PS stereochemistry were used to evaluate the method performance, and all three methods showed excellent sensitivity toward changes in the diastereoisomeric composition. Interactions via the solvent-accessible areas and a combination of hydrophobic and electrostatic forces may be responsible for the selectivity demonstrated by MICC and in-series RP-SAX, respectively.

Determination of individual oligonucleotide impurities by small amine ion pair-RP HPLC MS and MS/MS: n - 1 impurities.

Ion pair-reversed phase (IP-RP) HPLC is one of the most widely used methods for the analysis of oligonucleotide impurities. The method is compatible with mass spectrometry and has been used to guide the development of improved synthesis and purification approaches. The ability to detect and characterize impurities depends on the reagents and the IP buffer system employed, as each can directly affect the degree of chromatographic separation and the sensitivity of detection by MS. Previous work in our laboratory has shown that small alkyl amines are suitable IP reagents for the analysis of impurities in phosphate diester oligonucleotides and can be used to differentiate among individual members of composite impurity families. The addition of an alkyl acid often further enhances peak separation, but at the detriment of ion signal. An improved method with increased chromatographic performance and sensitivity of detection is presented here. Improvements were mainly realized through the use of lower concentrations of small alkyl amine (i.e., 5 mM) and acid (0.5 mM) IP reagents, and ammonium bicarbonate (20 mM) as a buffer. The improved capabilities of the new method are demonstrated by separation of the individual components of the composite n - 1 impurity in a set of four production-scale batches of a single oligonucleotide. Addition of the alkyl acid resulted in resolution of most individual n - 1 impurities. The observed enhanced sensitivity of detection allowed multiple reaction monitoring (MRM) experiments, which were used to differentiate among unresolved impurities.

Automated determination of early eluting oligonucleotide impurities using ion-pair reversed-phase liquid chromatography high resolution-mass spectrometry.

A new method is presented for the automated determination of early eluting (E.E.) oligonucleotide impurities analyzed by IP-RP HPLC HRMS. E.E. are impurities shorter than the main drug component and are primarily formed by the mechanisms of coupling failure, and depurination. The method is based on the detection of the theoretically derived most abundant mass of an impurity in the experimental data. An exhaustive list of candidate impurities and their formulas is automatically generated using the parent sequence and the known mechanisms of impurity formation. The approach accounts for possible modifications in the individual oligonucleotide sequence moieties (e.g., linkage, sugar, and base, 3', and 5' ends). The detected ion signal is summed to provide four nested levels of impurity breakdown information. The approach allows for the rapid determination of relationships and trends of impurities in samples generated by different manufacturing processes and conditions. Representative examples are given to illustrate the capabilities and utility of the approach in synthesis and purification process optimization applications.

Small alkyl amines as ion-pair reagents for the separation of positional isomers of impurities in phosphate diester oligonucleotides.

In an effort to improve separation of impurities in oligonucleotide drugs, alkyl amines of different length and carbon content were evaluated as reagents in ion pair-reversed phase (IP-RP) HPLC with mass spectrometric detection. A range of columns was tested in combination with different buffers, ion-pair modifiers and varying pH adjustments. For phosphorothioate oligonucleotides, larger amines, like tributyl and hexyl amine provided the best chromatography, as small amines tended to broaden peaks due to the separation of diastereoisomers. For phosphate diester oligonucleotides, the best separations were obtained using small alkyl amines, like propyl-, isopropyl- and diethylamine. Conditions optimized for oligonucleotide sequence and type of impurity enabled full separation of the individual components of composite impurities, such as n-1, N3-(2-cyanoethyl)thymine (CNET), deaminated and 3-(2-oxopropyl)imidazopyrimidinone (OPC) impurities. The addition of long-chain alkyl acids like hexanoic acid to the IP buffer resulted in further improvements in peak separation.

Semi-quantitative determination of co-eluting impurities in oligonucleotide drugs using ion-pair reversed-phase liquid chromatography mass spectrometry.

Continued improvements in understanding RNA biology have led to significant success in the development of antisense oligonucleotide therapeutics, and several oligonucleotide drugs have now been approved. Manufacturing of oligonucleotides may be associated with the production of impurities. Current methods for quantification of impurities that co-elute with the main drug component rely on manual ion extraction and integration of the characteristic mass signal of each impurity. For certain applications however, especially those involving large sets of samples such as those generated in the optimization of oligonucleotide manufacturing processes, a rapid method that provides semi-quantitative determination of impurity levels would be sufficient. In this work, an automated approach has been developed to rapidly determine the relative amounts of co-eluting impurities in oligonucleotide samples. The most abundant mass in the isotopic distribution is automatically calculated from the impurity formula and used to detect the presence of the impurities. The principles of the approach are described, and representative examples are given. Impurities determined in different manufacturing lots are compared directly, and by principal component analysis. The ability of the method to determine impurity levels across large sample sets is illustrated for an oligonucleotide drug purification study.

Two-dimensional liquid chromatography-mass spectrometry for the characterization of modified oligonucleotide impurities.

A 2D-LC system coupled with a TOF mass spectrometer has been evaluated for its capabilities to provide enhanced characterization of oligonucleotide impurities. To address loop limitations in the total volume (40 µL) sampled across 1D peaks, a column trap was incorporated between the 1D and 2D columns. The main advantages of the column trap include reduction of the total number of sequential 2D runs required to fully sample broad 1D peaks, and most importantly, reduction of the error in quantitative determination of the components in broad 1D peaks by avoiding the numerical stitching of data from several 2D runs. Comprehensive RP x IP provided orthogonal separation despite its lower 1D resolution. In contrast, IP x IP did not provide orthogonal separation. RP x IP using the direct on-line extended heart-cutting system with the column trap showed additional benefits, in the elimination of off-line fractionation and sample handling errors and was successfully applied in a pH stability study of a crude oligonucleotide. SAX x IP successfully separated the isobaric "n+16" doublet of the "n + O" and "[n + S-O]" impurity species, a feat not currently possible by mass spectrometry alone or 1D-LC, demonstrating the importance of the added capabilities of the 2D-LC approach.

Rapid Oligonucleotide Drug Impurity Determination by Direct Spectral Comparison of Ion Pair-Reversed Phase HPLC ESI MS Data.

RATIONALE: Quantitative Ion-Pair (IP)-HPLC MS methods are employed to determine the complex impurity profiles of oligonucleotide therapeutics. While impurities that co-elute with the main product are routinely monitored, the large number of early and late eluting impurities makes their individual measurements tedious and time-consuming. An improved method is needed for routine analyses. METHODS: A Combined Ranking (CR) index is developed to provide a composite value for both qualitative and quantitative impurity changes. Positive and Negative Impurity Change (PIC/NIC) indices are developed to determine the degree and direction of change. Optimized experimental conditions are determined for the characterization of trace levels of impurities. Replicate analysis, blank subtraction, and signal processing approaches are used to enhance the S/N. Dot-product and Euclidean distance equations monitor spectral changes. RESULTS: Spiking experiments with individual and complex impurity mixtures show the method can distinguish among samples differing in impurity content by 0.2% wt. The method has been applied to monitor changes in impurity profile among different batches of the same oligonucleotide and changes in the same batch over time (stability analysis). The method permits rapid determination of changes in the types and amounts (increases and decreases) of impurities present. CONCLUSIONS: A novel approach for the rapid determination of changes in the impurity profile of oligonucleotide therapeutics has been developed. The straightforward data treatment and the speed and simplicity of the approach make the method easy to implement and use. Possible quality control applications include drug substance and drug product stability studies, and the assessment of batch-to-batch variability.

A Novel and Intuitive Method of Displaying and Interacting with Mass Difference Information: Application to Oligonucleotide Drug Impurities.

A new method is presented for determining relationships between components in complex analytical systems. The method uses the mass differences between peaks in high resolution electrospray ionization (ESI) mass spectra. It relates peaks that share common mass differences. The method is based on the fundamental assumption that peaks in the spectra having the same exact mass difference are related by the same chemical moiety/substructure. Moreover, the presence (or absence/loss) of the same chemical moiety from a series of molecules may reflect similarities in the mechanisms of formation of each molecule. The determined mass differences in the spectra are used to automatically differentiate the types of components in the samples. Contour plots and summary plots of the summed total ion signal as a function of the mass difference are generated, which form powerful tools for the rapid and automated determination of the components in the samples and for comparisons with other samples. For the first time, in this work a unique profile contour plot has been developed that permits the interactive interrogation of the mass range by mass difference data matrix to obtain valuable information about components that share a common mechanism of formation, and all possible mechanisms of formation linked to a selected precursor molecule. The method can be used as an additional and complementary method to the existing analytical methods to determine relationships between components in complex chemical systems.

Probing the molecular weight distributions of non-boiling petroleum fractions by Ag+ electrospray ionization mass spectrometry.

This work explores the possibility of Ag+ electrospray ionization mass spectrometry (ESI-MS) to determine the molecular weight distributions of non-boiling petroleum fractions. Information about the molecular weight distributions is needed for fundamental studies on the nature of heavy crude oils and bitumens and for the development of novel recovery and processing methods. The method does not depend on thermal processes for the introduction of the fractions into the gas phase of the mass spectrometer, which is a considerable advantage over most other ionization methods. The Ag+ electrospray mass spectra of the fractions analyzed by using a toluene/methanol/cyclohexane (60:28:12%) solvent system display bimodal distributions in the ranges m/z approximately 300 to approximately 3000 and m/z 3000 to approximately 20,000. The abundances of the high molecular weight peak distributions can be reduced by in-source collisional activation experiments. Comparisons with the results obtained for model heteroatom-containing compounds (molecular weight < 600 Da) and high molecular weight polystyrene standards (up to one million Da) indicate that the majority of the structures in the saturate, naphthenoaromatic and polar aromatic fractions, and a significant portion of the asphaltenes, are small molecules. However, a considerable portion of the asphaltenes and some portion of the other fractions contain high molecular weight structures bound by covalent or strong non-covalent bonds. The results obtained by the Ag+ ESI method in this study for the saturate, aromatic, and polar fractions in a bitumen are in qualitative agreement with published molecular weight average results obtained for Cold Lake bitumen fractions analyzed by conventional gel permeation chromatography and field desorption mass spectrometry. Further work is needed to study the nature of the bonds and the interactions of the molecules in the asphaltene fractions by Ag+ ESI-MS.

Reduction of chemical formulas from the isotopic peak distributions of high-resolution mass spectra.

A method has been developed for the reduction of the chemical formulas of compounds in complex mixtures from the isotopic peak distributions of high-resolution mass spectra. The method is based on the principle that the observed isotopic peak distribution of a mixture of compounds is a linear combination of the isotopic peak distributions of the individual compounds in the mixture. All possible chemical formulas that meet specific criteria (e.g., type and number of atoms in structure, limits of unsaturation, etc.) are enumerated, and theoretical isotopic peak distributions are generated for each formula. The relative amount of each formula is obtained from the accurately measured isotopic peak distribution and the calculated isotopic peak distributions of all candidate formulas. The formulas of compounds in simple spectra, where peak components are fully resolved, are rapidly determined by direct comparison of the calculated and experimental isotopic peak distributions. The singular value decomposition linear algebra method is used to determine the contributions of compounds in complex spectra containing unresolved peak components. The principles of the approach and typical application examples are presented. The method is most useful for the characterization of complex spectra containing partially resolved peaks and structures with multiisotopic elements.

Quantitative determination of polar and ionic compounds in petroleum fractions by atmospheric pressure chemical ionization and electrospray ionization mass spectrometry.

The capabilities of atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) methods for quantitative analysis of polar and ionic compounds in petroleum fractions have been examined. The requirements of the analysis for sensitivity, linear dynamic range, and structural characterization have been discussed. ESI was found to be approximately two orders of magnitude more sensitive than APCI and is most suitable for the detection of analytes in weak concentrations. Equivalent relative linear dynamic ranges were observed by the two methods (at least three orders of magnitude). For the relatively high analyte concentrations examined here (e.g., 1-100 ppm or higher), the absolute area counts increased linearly with the analyte amount only in APCI, making this method more attractive for quantitative liquid chromatography/mass spectrometry (LC/MS) applications. Nevertheless, a wider range of ionic compounds can be detected by ESI than by APCI.

Molecular weight distributions of heavy aromatic petroleum fractions by Ag+ electrospray ionization mass spectrometry.

The ability of electrospray ionization mass spectrometry (ESI MS) to analyze heavy aromatic petroleum fractions using silver nitrate as a reagent compound to form characteristic adduct ions has been examined. The complexation of aromatic compounds containing long alkyl substituents with the silver ion leads to the formation of abundant adduct ions such as [M + Ag]+ and [2M + Ag]+. The concentration of the [2M + Ag]+ ions can be reduced by increasing the sampling cone voltage. Molecular ions and other adduct ions may also be formed depending on the structure of the aromatic molecule. Results obtained from the analysis of representative heavy petroleum fractions and vacuum residues by the Ag+ ESI MS method and conventional ionization methods were in good agreement. The current method extends the applicability of electrospray ionization to the analysis of neutral hydrocarbons in heavy aromatic petroleum fractions. It is simple and compatible with widely available LC/MS instrumentation. The extreme complexity of the Ag