Characterizing Natural Frequencies of the Hybrid III and NOCSAE Headforms.

The vibrational characteristics of the Hybrid III and NOCSAE headforms are not well understood. It is hypothesized that they may perform differently in certain loading environments due to their structural differences; their frequency responses may differ depending on the impact characteristics. Short-duration impacts excite a wider range of headform frequencies than longer-duration (padded) impacts. While headforms generally perform similarly during padded head impacts where resonant frequencies are avoided, excitation of resonant frequencies during short-duration impacts can result in differences in kinematic measurements between headforms for the matched impacts. This study aimed to identify the natural frequencies of each headform through experimental modal analysis techniques. An impulse hammer was used to excite various locations on both the Hybrid III and NOCSAE headforms. The resulting frequency response functions were analyzed to determine the first natural frequencies. The average first natural frequency of the NOCSAE headform was 812 Hz. The Hybrid III headform did not exhibit any natural frequencies below 1000 Hz. Comparisons of our results with previous studies of the human head suggest that the NOCSAE headform's vibrational response aligns more closely with that of the human head, as it exhibits lower natural frequencies. This insight is particularly relevant for assessing head injury risk in short-duration impact scenarios, where resonant frequencies can influence the injury outcome.

Mechanisms of Injury Leading to Concussions in Collegiate Soccer Players: A CARE Consortium Study.

BACKGROUND: Few previous studies have investigated how different injury mechanisms leading to sport-related concussion (SRC) in soccer may affect outcomes. PURPOSE: To describe injury mechanisms and evaluate injury mechanisms as predictors of symptom severity, return to play (RTP) initiation, and unrestricted RTP (URTP) in a cohort of collegiate soccer players. STUDY DESIGN: Cohort study; Level of evidence, 2. METHODS: The Concussion Assessment, Research and Education (CARE) Consortium database was used. The mechanism of injury was categorized into head-to-ball, head-to-head, head-to-body, and head-to-ground/equipment. Baseline/acute injury characteristics-including Sports Concussion Assessment Tool-3 total symptom severity (TSS), loss of consciousness (LOC), and altered mental status (AMS); descriptive data; and recovery (RTP and URTP)-were compared. Multivariable regression and Weibull models were used to assess the predictive value of the mechanism of injury on TSS and RTP/URTP, respectively. RESULTS: Among 391 soccer SRCs, 32.7% were attributed to a head-to-ball mechanism, 27.9% to a head-to-body mechanism, 21.7% to a head-to-head mechanism, and 17.6% to a head-to-ground/equipment mechanism. Event type was significantly associated with injury mechanism [χ2(3) = 63; P < .001), such that more head-to-ball concussions occurred in practice sessions (n = 92 [51.1%] vs n = 36 [17.1%]) and more head-to-head (n = 65 [30.8%] vs n = 20 [11.1]) and head-to-body (n = 76 [36%] vs n = 33 [18.3%]) concussions occurred in competition. The primary position was significantly associated with injury mechanism [χ2(3) = 24; P < .004], with goalkeepers having no SRCs from the head-to-head mechanism (n = 0 [0%]) and forward players having the least head-to-body mechanism (n = 15 [19.2%]). LOC was also associated with injury mechanism (P = .034), with LOC being most prevalent in head-to-ground/equipment. Finally, AMS was most prevalent in head-to-ball (n = 54 [34.2%]) and head-to-body (n = 48 [30.4%]) mechanisms [χ2(3) = 9; P = .029]. In our multivariable models, the mechanism was not a predictor of TSS or RTP; however, it was associated with URTP (P = .044), with head-to-equipment/ground injuries resulting in the shortest mean number of days (14 ± 9.1 days) to URTP and the head-to-ball mechanism the longest (18.6 ± 21.6 days). CONCLUSION: The mechanism of injury differed by event type and primary position, and LOC and AMS were different across mechanisms. Even though the mechanism of injury was not a significant predictor of acute symptom burden or time until RTP initiation, those with head-to-equipment/ground injuries spent the shortest time until URTP, and those with head-to-ball injuries had the longest time until URTP.

When to Pull the Trigger: Conceptual Considerations for Approximating Head Acceleration Events Using Instrumented Mouthguards.

Head acceleration events (HAEs) are acceleration responses of the head following external short-duration collisions. The potential risk of brain injury from a single high-magnitude HAE or repeated occurrences makes them a significant concern in sport. Instrumented mouthguards (iMGs) can approximate HAEs. The distinction between sensor acceleration events, the iMG datum for approximating HAEs and HAEs themselves, which have been defined as the in vivo event, is made to highlight limitations of approximating HAEs using iMGs. This article explores the technical limitations of iMGs that constrain the approximation of HAEs and discusses important conceptual considerations for stakeholders interpreting iMG data. The approximation of HAEs by sensor acceleration events is constrained by false positives and false negatives. False positives occur when a sensor acceleration event is recorded despite no (in vivo) HAE occurring, while false negatives occur when a sensor acceleration event is not recorded after an (in vivo) HAE has occurred. Various mechanisms contribute to false positives and false negatives. Video verification and post-processing algorithms offer effective means for eradicating most false positives, but mitigation for false negatives is less comprehensive. Consequently, current iMG research is likely to underestimate HAE exposures, especially at lower magnitudes. Future research should aim to mitigate false negatives, while current iMG datasets should be interpreted with consideration for false negatives when inferring athlete HAE exposure.

Choosing Optimal Cutoff Frequencies for Filtering Linear Acceleration and Angular Velocity Signals Associated with Head Impacts Measured by Instrumented Mouthguards.

Head impact sensors worn in the mouth are popular because they couple directly to the teeth and provide six-degree-of-freedom head measurements. Mouthpiece signal filters have conventionally used cutoff frequencies lower than recommended practices (Society of Automotive Engineers, SAE J211-1) to eliminate extraneous noise when measuring with live subjects. However, there is little information about the effects of filter choice on the accuracy of signals measured by instrumented mouthpieces. Lack of standardization in head impact measurement device post-processing techniques can result in data that are not comparable across studies or device brands. This study sought optimal filter cutoff frequencies for six-degree-of-freedom measurements made at the teeth using instrumented mouthguards. We collected linear acceleration and angular velocity signals at the head center of gravity (CG) using laboratory-grade instrumentation. We also collected and filtered similar six-degree-of-freedom measurements from an instrumented mouthguard using 24 cutoff frequencies, from 25 to 600 Hz. We transformed the measurements to linear acceleration at the center of gravity of the head (CG) using all kinematic variables at the teeth, optimizing linear and angular mouthguard cutoff frequencies with one equation. We calculated the percent error in transformed peak resultant linear acceleration and minimized the mean and standard deviation in error. The optimal cutoff frequencies were 175 Hz for linear acceleration and 250 Hz for angular velocity. Rigid impacts (3-5 ms duration) had higher optimal cutoff frequencies (175 Hz linear acceleration, 275 Hz angular velocity) than padded impacts (10-12 ms duration; 100 Hz linear acceleration, 175 Hz angular velocity), and all impacts together (3-12 ms duration; 175 Hz linear acceleration, 250 Hz angular velocity). Instrumented mouthpiece manufacturers and researchers using these devices should consider these optimal filter cutoff frequencies to minimize measurement error. Sport-specific filter criteria for teeth-based sensors may be warranted to account for the difference in optimal cutoff frequency combination by impact duration.

Human Head and Helmet Interface Friction Coefficients with Biological Sex and Hair Property Comparisons.

Dummy headforms used for impact testing have changed little over the years, and frictional characteristics are thought not to represent the human head accurately. The frictional interface between the helmet and head is an essential factor affecting impact response. However, few studies have evaluated the coefficient of friction (COF) between the human head and helmet surface. This study's objectives were to quantify the human head's static and dynamic COF and evaluate the effect of biological sex and hair properties. Seventy-four participants slid their heads along a piece of helmet foam backed by a fixed load cell at varying normal force levels. As normal force increased, static and dynamic human head COF decreased following power-law curves. At 80 N, the static COF is 0.32 (95% CI 0.30-0.34), and the dynamic friction coefficient is 0.27 (95% CI 0.26-0.28). Biological sex and hair properties were determined not to affect human head COF. The COFs between the head and helmet surface should be used to develop more biofidelic head impact testing methods, define boundary conditions for computer simulations, and aid decision-making for helmet designs.

Whitewater Helmet STAR: Evaluation of the Biomechanical Performance and Risk of Head Injury for Whitewater Helmets.

More than six million people participate in whitewater kayaking and rafting in the United States each year. Unfortunately, with these six million whitewater participants come 50 deaths annually, making it one of the highest fatality rates of all sports. As the popularity in whitewater activities grows, the number of injuries, including concussions, also increases. The objective of this study was to create a new rating system for whitewater helmets by evaluating the biomechanical performance and risk of head injury of whitewater helmets using the Summation of Tests for the Analysis of Risk (STAR) system. All watersport helmets that passed the EN: 1385: 2012 standard and that were clearly marketed for whitewater use were selected for this study. Two samples of each helmet model were tested on a custom pendulum impactor under conditions known to be associated with the highest risk of head injury and death. A 50th percentile male NOCSAE headform instrumented with three linear accelerometers and a triaxial angular rate sensor coupled with a Hybrid III 50th percentile neck were used for data collection. A total of 126 tests were performed using six different configurations. These included impacts to the front, side, and rear using two speeds of 3.1 and 4.9 m/s that modeled whitewater river flow rates. Each helmet's STAR score was calculated using the combination of exposure and injury risk that was determined from the linear and rotational head accelerations. The resulting head impact accelerations predicted a very high risk of concussion for all impact locations at the 4.9 m/s speed. The STAR score varied between helmets indicating that some helmets provide better protection than others. Overall, these results show a clear need for improvement in whitewater helmets, and the methodologies developed in this research project should provide manufacturers a design tool for improving these products.

Consensus Head Acceleration Measurement Practices (CHAMP): Study Design and Statistical Analysis.

Head impact measurement devices enable opportunities to collect impact data directly from humans to study topics like concussion biomechanics, head impact exposure and its effects, and concussion risk reduction techniques in sports when paired with other relevant data. With recent advances in head impact measurement devices and cost-effective price points, more and more investigators are using them to study brain health questions. However, as the field's literature grows, the variance in study quality is apparent. This brief paper aims to provide a high-level set of key considerations for the design and analysis of head impact measurement studies that can help avoid flaws introduced by sampling biases, false data, missing data, and confounding factors. We discuss key points through four overarching themes: study design, operational management, data quality, and data analysis.

Football Shoulder Pad Design and Its Effect on Head Kinematics in Shoulder-to-Helmet Impacts.

Shoulder-to-helmet (STH) impacts have been shown to cause approximately twenty percent of concussions in football yet little research has investigated shoulder pad design and STH impacts. This study aimed to characterize STH impacts and identify the effect of shoulder pad design on the struck head kinematics. Additional padding was added to a shoulder pad, and was then compared to an unmodified control shoulder pad. Participants performed a series of tests where they struck a helmeted Hybrid III dummy with both shoulder pad variations to compare struck head linear and rotational kinematics. The study found the modified shoulder pad reduced peak linear acceleration by 31% (Δµ = - 9.13 g's (- ∞, - 7.25), (p = 4.10e-08)), rotational acceleration by 28% (Δµ = - 565 rad s-2(- ∞, - 435), (p = 2.10e-07)), peak rotational velocity by 10% (Δµ = - 2.42 rad s-1 (- ∞, - 1.54), (p = 6.9e-05)), and increased impact duration by 40% (Δµ = 9.96 ms (8.06, ∞), (p = 1.142e-08)). Impact response corridors were developed for both shoulder pad conditions and can be used to establish a controlled lab test setup that replicates STH impacts. Our findings suggest that shoulder pads have the potential to reduce head injury in football and warrant further research.

Optimizing Concussion Care Seeking: The Influence of Previous Concussion Diagnosis Status on Baseline Assessment Outcomes.

BACKGROUND: The prevalence of unreported concussions is high, and undiagnosed concussions can lead to worse postconcussion outcomes. It is not clear how those with a history of undiagnosed concussion perform on subsequent standard concussion baseline assessments. PURPOSE: To determine if previous concussion diagnosis status was associated with outcomes on the standard baseline concussion assessment battery. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: Concussion Assessment, Research, and Education (CARE) Consortium participants (N = 29,934) self-reported concussion history with diagnosis status and completed standard baseline concussion assessments, including assessments for symptoms, mental status, balance, and neurocognition. Multiple linear regression models were used to estimate mean differences and 95% CIs among concussion history groups (no concussion history [n = 23,037; 77.0%], all previous concussions diagnosed [n = 5315; 17.8%], ≥1 previous concussions undiagnosed [n = 1582; 5.3%]) at baseline for all outcomes except symptom severity and Brief Symptom Inventory-18 (BSI-18) score, in which negative binomial models were used to calculate incidence rate ratios (IRRs). All models were adjusted for sex, race, ethnicity, sport contact level, and concussion count. Mean differences with 95% CIs excluding 0.00 and at least a small effect size (≥0.20), and those IRRs with 95% CIs excluding 1.00 and at least a small association (IRR, ≥1.10) were considered significant. RESULTS: The ≥1 previous concussions undiagnosed group reported significantly greater symptom severity scores (IRR, ≥1.38) and BSI-18 (IRR, ≥1.31) scores relative to the no concussion history and all previous concussions diagnosed groups. The ≥1 previous concussions undiagnosed group performed significantly worse on 6 neurocognitive assessments while performing better on only 2 compared with the no concussion history and all previous concussions diagnosed groups. There were no between-group differences on mental status or balance assessments. CONCLUSION: An undiagnosed concussion history was associated with worse clinical indicators at future baseline assessments. Individuals reporting ≥1 previous undiagnosed concussions exhibited worse baseline clinical indicators. This may suggest that concussion-related harm may be exacerbated when injuries are not diagnosed.

A Two-Phased Approach to Quantifying Head Impact Sensor Accuracy: In-Laboratory and On-Field Assessments.

Measuring head impacts in sports can further our understanding of brain injury biomechanics and, hopefully, advance concussion diagnostics and prevention. Although there are many head impact sensors available, skepticism on their utility exists over concerns related to measurement error. Previous studies report mixed reliability in head impact sensor measurements, but there is no uniform approach to assessing accuracy, making comparisons between sensors and studies difficult. The objective of this paper is to introduce a two-phased approach to evaluating head impact sensor accuracy. The first phase consists of in-lab impact testing on a dummy headform at varying impact severities under loading conditions representative of each sensor's intended use. We quantify in-lab accuracy by calculating the concordance correlation coefficient (CCC) between a sensor's kinematic measurements and headform reference measurements. For sensors that performed reasonably well in the lab (CCC ≥ 0.80), we completed a second phase of evaluation on-field. Through video validation of impacts measured by sensors on athletes, we classified each sensor measurement as either true-positive and false-positive impact events and computed positive predictive value (PPV) to summarize real-world accuracy. Eight sensors were tested in phase one, but only four sensors were assessed in phase two. Sensor accuracy varied greatly. CCC from phase one ranged from 0.13 to 0.97, with an average value of 0.72. Overall, the four devices that were implemented on-field had PPV that ranged from 16.3 to 91.2%, with an average value of 60.8%. Performance in-lab was not always indicative of the device's performance on-field. The methods proposed in this paper aim to establish a comprehensive approach to the evaluation of sensors so that users can better interpret data collected from athletes.

Estimated age of first exposure to American football and outcome from concussion.

OBJECTIVE: To examine the association between estimated age at first exposure (eAFE) to American football and clinical measures throughout recovery following concussion. METHODS: Participants were recruited across 30 colleges and universities as part of the National Collegiate Athletic Association (NCAA)-Department of Defense Concussion Assessment, Research and Education Consortium. There were 294 NCAA American football players (age 19 ± 1 years) evaluated 24-48 hours following concussion with valid baseline data and 327 (age 19 ± 1 years) evaluated at the time they were asymptomatic with valid baseline data. Participants sustained a medically diagnosed concussion between baseline testing and postconcussion assessments. Outcome measures included the number of days until asymptomatic, Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT) composite scores, Balance Error Scoring System (BESS) total score, and Brief Symptom Inventory 18 (BSI-18) subscores. The eAFE was defined as participant's age at the time of assessment minus self-reported number of years playing football. RESULTS: In unadjusted regression models, younger eAFE was associated with lower (worse) ImPACT Visual Motor Speed (R 2 = 0.031, p = 0.012) at 24-48 hours following injury and lower (better) BSI-18 Somatization subscores (R 2 = 0.014, p = 0.038) when the athletes were asymptomatic. The effect sizes were very small. The eAFE was not associated with the number of days until asymptomatic, other ImPACT composite scores, BESS total score, or other BSI-18 subscores. CONCLUSION: Earlier eAFE to American football was not associated with longer symptom recovery, worse balance, worse cognitive performance, or greater psychological distress following concussion. In these NCAA football players, longer duration of exposure to football during childhood and adolescence appears to be unrelated to clinical recovery following concussion.

Immediate Removal From Activity After Sport-Related Concussion Is Associated With Shorter Clinical Recovery and Less Severe Symptoms in Collegiate Student-Athletes.

BACKGROUND: Timely removal from activity after concussion symptoms remains problematic despite heightened awareness. Previous studies indicated potential adverse effects of continuing to participate in physical activity immediately after sustaining a concussion. Hypothesis/Purpose: The purpose was to determine the effect of timing of removal from play after concussion on clinical outcomes. It was hypothesized that immediate removal from activity after sport-related concussion (SRC) would be associated with less time missed from sport, a shorter symptomatic period, and better outcomes on acute clinical measures. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: Data were reported from the National Collegiate Athletic Association and Department of Defense Grand Alliance: Concussion Awareness, Research, and Education (CARE) Consortium. Participants with 506 diagnosed SRCs from 18 sports and 25 institutions and military service academies were analyzed and classified as either immediate removal from activity (I-RFA) or delayed removal from activity (D-RFA). Outcomes of interest included time missed from sport attributed to their SRC, symptom duration, and clinical assessment scores. RESULTS: There were 322 participants (63.6%) characterized as D-RFA. I-RFA status was associated with significantly less time missed from sport ( R2 change = .022-.024, P < .001 to P = .001) and shorter symptom duration ( R2 change = .044-.046, P < .001 [all imputations]) while controlling for other SRC recovery modifiers. These athletes missed approximately 3 fewer days from sport participation. I-RFA athletes had significantly less severe acute SRC symptoms and were at lower risk of recovery taking ≥14 days (relative risk = .614, P < .001, small-medium effect size) and ≥21 days (relative risk = .534, P = .010, small effect size). CONCLUSION: I-RFA is a protective factor associated with less severe acute symptoms and shorter recovery after SRC. Conveying this message to athletes, coaches, and others involved in the care of athletes may promote timely injury reporting.

Magnitude of head impact exposures in individual collegiate football players.

The purpose of this study was to quantify the severity of head impacts sustained by individual collegiate football players and to investigate differences between impacts sustained during practice and game sessions, as well as by player position and impact location. Head impacts (N = 184,358) were analyzed for 254 collegiate players at three collegiate institutions. In practice, the 50th and 95th percentile values for individual players were 20.0 g and 49.5 g for peak linear acceleration, 1187 rad/s2 and 3147 rad/s2 for peak rotational acceleration, and 13.4 and 29.9 for HITsp, respectively. Only the 95th percentile HITsp increased significantly in games compared with practices (8.4%, p = .0002). Player position and impact location were the largest factors associated with differences in head impacts. Running backs consistently sustained the greatest impact magnitudes. Peak linear accelerations were greatest for impacts to the top of the helmet, whereas rotational accelerations were greatest for impacts to the front and back. The findings of this study provide essential data for future investigations that aim to establish the correlations between head impact exposure, acute brain injury, and long-term cognitive deficits.

The tolerance of the maxilla to blunt impact.

This study reports the results of 38 infraorbital maxilla impacts performed on male cadavers. Impacts were performed using an unpadded, cylindrical impactor (3.2 kg) at velocities between 1 and 5 m/s. The peak force and acoustic emission data were used to develop a statistical relationship of fracture risk as a function of impact force. Acoustic emission sensors were used to provide a noncensored measure of the maxilla tolerance and were essential due to the increase in impactor force after fracture onset. Parametric and nonparametric techniques were used to estimate the risk of fracture tolerance. The nonparametric technique produced an estimated 50% risk of fracture between 970 and 1223 N. The results obtained from the parametric and nonparametric techniques were in good agreement. Peak force values achieved in this study were similar to those of previous work and were unaffected by impactor velocity. The results of this study suggest that an impact to the infraorbital maxilla is a load-limited event due to compromise of structural integrity.

The tolerance of the frontal bone to blunt impact.

The current understanding of the tolerance of the frontal bone to blunt impact is limited. Previous studies have utilized vastly different methods, which limits the use of statistical analyses to determine the tolerance of the frontal bone. The purpose of this study is to determine the tolerance of the frontal bone to blunt impact. Acoustic emission sensors were used to provide a noncensored measure of the frontal bone tolerance and were essential due to the increase in impactor force after fracture onset. In this study, risk functions for fracture were developed using parametric and nonparametric techniques. The results of the statistical analyses suggest that a 50% risk of frontal bone fracture occurs at a force between 1885 N and 2405 N. Subjects that were found to have a frontal sinus present within the impacted region had a significantly higher risk of sustaining a fracture. There was no association between subject age and fracture force. The results of the current study suggest that utilizing peak force as an estimate of fracture tolerance will overestimate the force necessary to create a frontal bone fracture.

The tolerance of the nasal bone to blunt impact.

The nasal bone is among the most frequently broken facial bone due to all types of trauma and is the most frequently fractured facial bone due to motor vehicle collisions. This study reports the results of anterior-posterior impacts performed on male cadavers using a free-falling impactor with a flat impacting surface. The force at fracture onset was determined using an acoustic emission sensor. These non-censored data were utilized in parametric and non-parametric techniques to determine a relationship between applied force and fracture risk. Based on these analyses a 50% risk of fracture corresponded to an applied force of approximately 450 to 850 N. There was no correlation between fracture force and anthropometric measures of the nasal bone. Interestingly, age had a statistically significant relationship with the risk of nasal bone fracture. This study demonstrates the need for a non-censored measure of fracture occurrence when evaluating structures that can continue to support load after fracture onset.

Investigation of traumatic brain injuries using the next generation of simulated injury monitor (SIMon) finite element head model.

The objective of this study was to investigate potential for traumatic brain injuries (TBI) using a newly developed, geometrically detailed, finite element head model (FEHM) within the concept of a simulated injury monitor (SIMon). The new FEHM is comprised of several parts: cerebrum, cerebellum, falx, tentorium, combined pia-arachnoid complex (PAC) with cerebro-spinal fluid (CSF), ventricles, brainstem, and parasagittal blood vessels. The model's topology was derived from human computer tomography (CT) scans and then uniformly scaled such that the mass of the brain represents the mass of a 50th percentile male's brain (1.5 kg) with the total head mass of 4.5 kg. The topology of the model was then compared to the preliminary data on the average topology derived from Procrustes shape analysis of 59 individuals. Material properties of the various parts were assigned based on the latest experimental data. After rigorous validation of the model using neutral density targets (NDT) and pressure data, the stability of FEHM was tested by loading it simultaneously with translational (up to 400 g) combined with rotational (up to 24,000 rad/s2) acceleration pulses in both sagittal and coronal planes. Injury criteria were established in the manner shown in Takhounts et al. (2003a). After thorough validation and injury criteria establishment (cumulative strain damage measure--CSDM for diffuse axonal injuries (DAI), relative motion damage measure--RMDM for acute subdural hematoma (ASDH), and dilatational damage measure--DDM for contusions and focal lesions), the model was used in investigation of mild TBI cases in living humans based on a set of head impact data taken from American football players at the collegiate level. It was found that CSDM and especially RMDM correlated well with angular acceleration and angular velocity. DDM was close to zero for most impacts due to their mild severity implying that cavitational pressure anywhere in the brain was not reached. Maximum principal strain was found to correlate well with RMDM and angular head kinematic measures. Maximum principal stress didn't correlate with any kinematic measure or injury metric. The model was then used in the investigation of brain injury potential in NHTSA conducted side impact tests. It was also used in parametric investigations of various "what if" scenarios, such as side versus frontal impact, to establish a potential link between head kinematics and injury outcomes. The new SIMon FEHM offers an advantage over the previous version because it is geometrically more representative of the human head. This advantage, however, is made possible at the expense of additional computational time.

Lateral bending biomechanical analysis of neck protection devices used in football.

The objective of this study was to perform a dynamic biomechanical analysis of football neck collars in order to determine their effect on head and neck loading. A total of 48 tests were performed comparing the Cowboy Collar, Bullock Collar, and the Kerr Collar. A control and each collar was tested at two speeds (5 m/s and 7 m/s), three impact locations (front, top, and side of the helmet), and two shoulder pad positions (normal and raised). This paper specifically analyzes the load limiting capabilities of these collars during an impact to the side of the helmet. A 50 percentile male Hybrid III dummy was equipped with a helmet, shoulder pads, and the various neck collars mentioned. The dummy was instrumented with tri-axial accelerometers at the CG of the head. Angular rate sensors were used in the head and chest. In addition, both the upper and lower neck were instrumented with load cells. The helmet was struck with a pneumatic linear impactor to provoke rotation of the head and neck. With the side impact location, the Kerr Collar substantially reduced lower neck moment. These reductions in loads correlate with the degree to which each collar restricted the motion of the head and neck.