Production of pharmaceutical grade [201Tl]Thallous chloride using 30 MeV cyclotron.

Multiple patient doses of [201Tl]TlCl has been produced using electrodeposited enriched 203Tl in 30 MeV cyclotron (Cyclone-30) with 28 MeV proton energy at 50 µA beam current for 8 h. Ion Exchange Column Chromatography (IECC) and liquid-liquid extraction has been employed for semi-automated radiochemical separation and purification of produced [201Tl]TlCl. The produced [201Tl]TlCl was used in coronary artery disease (CAD) patients.

Copper coordinated ligand thioether-S and NO2(-) oxidation: relevance to the CuM site of hydroxylases.

In order to gain insight into the coordination site and oxidative activity of the CuM site of hydroxylases such as peptidylglycine α-hydroxylating monooxygenase (PHM), dopamine ß-monooxygenase (DßM), and tyramine ß-monooxygenase (TßM), we have synthesized, characterized and studied the oxidation chemistry of copper complexes chelated by tridentate N2Sthioether, N2Osulfoxide or N2Osulfone donor sets. The ligands are those of N-2-methylthiophenyl-2'-pyridinecarboxamide (HL1), and the oxidized variants, N-2-methylsulfenatophenyl-2'-pyridinecarboxamide (HL1(SO)), and N-2-methylsulfinatophenyl-2'-pyridinecarboxamide (HL1(SO2)). Our studies afforded the complexes [(L1)Cu(II)(H2O)](ClO4)·H2O (1·H2O), {[(L1(SO))Cu(II)(CH3CN)](ClO4)}n (2), [(L1)Cu(II)(ONO)] (3), [(L1(SO))Cu(II)(ONO)]n (4), [(L1)Cu(II)(NO3)]n (5), [(L1(SO))Cu(II)(NO3)]n (6) and [(L1(SO2))Cu(II)(NO3)] (7). Complexes 1 and 3 were described in a previous publication (Inorg. Chem., 2013, 52, 11084). The X-ray crystal structures revealed either distorted octahedral (in 2, 4-6) or square-pyramidal (in 1, 3) coordination geometry around Cu(II) ions of the complexes. In the presence of H2O2, conversion of 1→2, 3-5→6 and 6→7 occurs quantitatively via oxidation of thioether-S and/or Cu(ii) coordinated NO2(-) ions. Thioether-S oxidation of L1 also occurs when [L1](-) is reacted with [Cu(I)(CH3CN)4](ClO4) in DMF under O2, albeit low in yield (20%). Oxidations of thioether-S and NO2(-) were monitored by UV-Vis spectroscopy. Recovery of the sulfur oxidized ligands from their metal complexes allowed for their characterization by elemental analysis, (1)H NMR, FTIR and mass spectrometry.

Precision phase control for the radio frequency system of K500 superconducting cyclotron at Variable Energy Cyclotron Centre, Kolkata.

Variable Energy Cyclotron Centre (VECC) has commissioned K500 Superconducting cyclotron (SCC) based on MSU and Texas A&M university cyclotrons. The radio frequency (RF) system of SCC has been commissioned with the stringent requirement of various RF parameters. The three-phase RF system of Superconducting cyclotron has been developed in the frequency range 9-27 MHz with amplitude and phase stability of 100 ppm and ±0.1°, respectively. The phase control system has the option to change the relative phase difference between any two RF cavities and maintain the phase stability within ±0.1° during round-the-clock cyclotron operation. The said precision phase loop consists of both analogue In-phase∕Quadrature modulator to achieve faster response and also Direct Digital Synthesis based phase shifter to achieve wide dynamic range as well. This paper discusses detail insights into the various issues of phase control for the K500 SCC at VECC, Kolkata.

Copper complexes relevant to the catalytic cycle of copper nitrite reductase: electrochemical detection of NO(g) evolution and flipping of NO2 binding mode upon Cu(II) → Cu(I) reduction.

Copper complexes of the deprotonated tridentate ligand, N-2-methylthiophenyl-2'-pyridinecarboxamide (HL1), were synthesized and characterized as part of our investigation into the reduction of copper(II) o-nitrito complexes into the related copper nitric oxide complexes and subsequent evolution of NO(g) such as occurs in the enzyme copper nitrite reductase. Our studies afforded the complexes [(L1)Cu(II)Cl]n (1), [(L1)Cu(II)(ONO)] (2), [(L1)Cu(II)(H2O)](ClO4)·H2O (3·H2O), [(L1)Cu(II)(CH3OH)](ClO4) (4), [(L1)Cu(II)(CH3CO2)]·H2O (5·H2O), and [Co(Cp)2][(L1)Cu(I)(NO2)(CH3CN)] (6). X-ray crystal structure determinations revealed distorted square-pyramidal coordination geometry around Cu(II) ion in 1-5. Substitution of the H2O of 3 by nitrite quantitatively forms 2, featuring the κ(2)-O,O binding mode of NO2(-) to Cu(II). Reduction of 2 generates two Cu(I) species, one with κ(1)-O and other with the κ(1)-N bonded NO2(-) group. The Cu(I) analogue of 2, compound 6, was synthesized. The FTIR spectrum of 6 reveals the presence of κ(1)-N bonded NO2(-). Constant potential electrolysis corresponding to Cu(II) → Cu(I) reduction of a CH3CN solution of 2 followed by reaction with acids, CH3CO2H or HClO4 generates 5 or 3, and NO(g), identified electrochemically. The isolated Cu(I) complex 6 independently evolves one equivalent of NO(g) upon reaction with acids. Production of NO(g) was confirmed by forming [Co(TPP)NO] in CH2Cl2 (λ(max) in CH2Cl2: 414 and 536 nm, ν(NO) = 1693 cm(-1)).

Shuttling of nickel oxidation states in N4S2 coordination geometry versus donor strength of tridentate N2S donor ligands.

Seven bis-Ni(II) complexes of a N(2)S donor set ligand have been synthesized and examined for their ability to stabilize Ni(0), Ni(I), Ni(II) and Ni(III) oxidation states. Compounds 1-5 consist of modifications of the pyridine ring of the tridentate Schiff base ligand, 2-pyridyl-N-(2'-methylthiophenyl)methyleneimine ((X)L1), where X = 6-H, 6-Me, 6-p-ClPh, 6-Br, 5-Br; compound 6 is the reduced amine form (L2); compound 7 is the amide analog (L3). The compounds are perchlorate salts except for 7, which is neutral. Complexes 1 and 3-7 have been structurally characterized. Their coordination geometry is distorted octahedral. In the case of 6, the tridentate ligand coordinates in a facial manner, whereas the remaining complexes display meridional coordination. Due to substitution of the pyridine ring of (X)L1, the Ni-N(py) distances for 1~5 < 3 < 4 increase and UV-vis λ(max) values corresponding to the (3)A(2g)(F)→(3)T(2g)(F) transition show an increasing trend 1~5 < 2 < 3 < 4. Cyclic voltammetry of 1-5 reveals two quasi-reversible reduction waves that correspond to Ni(II)→Ni(I) and Ni(I)→Ni(0) reduction. The E(1/2) for the Ni(II)/Ni(I) couple decreases as 1 > 2 > 3 > 4. Replacement of the central imine N donor in 1 by amine 6 or amide 7 N donors reveals that complex 6 in CH(3)CN exhibits an irreversible reductive response at E(pc) = -1.28 V, E(pa) = +0.25 V vs saturated calomel electrode (SCE). In contrast, complex 7 shows a reversible oxidation wave at E(1/2) = +0.84 V (ΔE(p) = 60 mV) that corresponds to Ni(II)→Ni(III). The electrochemically generated Ni(III) species, [(L3)(2)Ni(III)](+) is stable, showing a new UV-vis band at 470 nm. EPR measurements have also been carried out.

First structural example of a metal uncoordinated mesoionic imidazo[1,5-a]pyridine and its precursor intermediate copper complex: an insight to the catalytic cycle.

Four copper complexes of a tridentate Schiff base ligand, 2-pyridyl-N-(2'-methylthiophenyl) methyleneimine, L(1) have been synthesized. All theses species, namely, [L(1)Cu(2)(SCN)(3)](n) (1), [Cu(SCN)(CH(3)CN)](n) (3), [(L(1))Cu(N(3))(Cl)] (4) and [(L(1))Cu(N(3))(SCN)] (5) have been structurally characterized. Complex 1 in acetonitrile promotes cycloaddition of a Cu(II) bound SCN(-) ion to L(1) that exclusively and stoichiometrically forms a mesoionic imidazo[1,5-a]pyridine, namely, 3-(imino-N'-2-methylthiophenyl)imidazo[1,5-a]pyridinium-1-thiolate (2) and a thiocyanato bridged Cu(i) complex, [Cu(SCN)(CH(3)CN)](n) (3). The X-ray crystal structure of 1 confirms the presence of square-pyramidal Cu(II) and tetrahedral Cu(I) ions in N(3)S(2) and N(2)S(2) coordination environments, respectively, bridged to each other via thiocyanate anion. The Cu(II) ions are bonded to a tridentate ligand L(1) and two SCN(-) ions occupy the remaining equatorial and an axial coordination site to adopt a square-pyramidal coordination geometry. To investigate which SCN(-) ion, axially or equatorially bound to Cu(II) center, underwent cycloaddition to L(1) to form 2, two mononuclear Cu(II) complexes 4 and 5 have been synthesized and their reactivity towards externally added KSCN was studied. The molecular structures of 4 and 5 feature a meridionally bound L(1) and an azide ion (N(3)(-)) in the square plane, while a Cl(-) or SCN(-) ion are occupying the axial site, respectively, to fulfill square-pyramidal coordination geometry. Complex 4 reacts with SCN(-) ion to form 5. That an MeCN solution of 5 itself, or of 5 in the presence of KSCN, does not produce 2, supports that possibly the Cu(II) bound equatorial SCN(-) ion is responsible for cycloaddition to L(1). Dark purple solid 2 has also been prepared (turnover number ~4 or 41% yield) efficiently following an alternative and easier one-pot synthesis procedure, that is from a mixture of KSCN and L(1) in the presence of a catalytic amount of anhydrous CuCl(2) (10 mol%) in MeCN in air. The X-ray crystal structure, (1)H NMR spectrum and solution conductivity measurements strongly support that 2 is mesoionic. An MeCN solution of 2 fluoresces at room temperature upon excitation at 240 nm with an emission maximum λ(em) at 470 nm, associated with a quantum yield of 0.16 with respect to a standard Rhodamine-6G fluorophore.