Phenotypic plasticity of growth ring traits in Pinus hartwegii at the ends of its elevational gradient.

Introduction: Phenotypic plasticity (PP) could be an important short-term mechanism to modify physiological and morphological traits in response to climate change and global warming, particularly for high-mountain tree species. The objective was to evaluate PP response of growth ring traits to temperature and precipitation in Pinus hartwegii Lindl. populations located at the ends of its elevational gradient on two volcanic mountains in central Mexico (La Malinche and Nevado de Toluca). Methods: Increment cores collected from 274 P. hartwegii trees were used to estimate their PP through reaction norms (RN), which relate the ring width and density traits with climate variables (temperature and precipitation). We estimated the trees' sensitivity (significant RN) to climatic variables, as well as the relative proportion of RN with positive and negative slope. We also estimated the relationship between the PP of ring width and density traits using correlation and Principal Component (PC) analyses. Results: Over 70% of all trees showed significant RN to growing season and winter temperatures for at least one growth ring trait, with a similar proportion of significant RN at both ends of the gradient on both mountains. Ring width traits had mostly negative RN, while ring density traits tended to have positive RN. Frequency of negative RN decreased from lower to higher elevation for most traits. Average PP was higher at the lower end of the gradient, especially on LM, both for ring width and ring density traits, although high intrapopulation variation in PP was found on both mountains. Discussion: Results indicate that P. hartwegii presents spatially differentiated plastic responses in width and density components of radial growth. PP was particularly strong at the lower elevation, which has higher temperature and water stress conditions, putting these populations at risk from the continuing global warming driven by climate change.

Use of near-infrared spectroscopy to estimate physical, anatomical and hydraulic properties of Eucalyptus wood.

Tree breeding programs and wood industries require simple, time- and cost-effective techniques to process large volumes of samples. In recent decades, near-infrared spectroscopy (NIRS) has been acknowledged as one of the most powerful techniques for wood analysis, making it the most used tool for high-throughput phenotyping. Previous studies have shown that a significant number of anatomical, physical, chemical and mechanical wood properties can be estimated through NIRS, both for angiosperm and gymnosperm species. However, the ability of this technique to predict functional traits related to drought resistance has been poorly explored, especially in angiosperm species. This is particularly relevant since determining xylem hydraulic properties by conventional techniques is complex and time-consuming, clearly limiting its use in studies and applications that demand large amounts of samples. In this study, we measured several wood anatomical and hydraulic traits and collected NIR spectra in branches of two Eucalyptus L'Hér species. We developed NIRS calibration models and discussed their ability to accurately predict the studied traits. The models generated allowed us to adequately calibrate the reference traits, with high R2 (≥0.75) for traits such as P12, P88, the slope of the vulnerability curves to xylem embolism or the fiber wall fraction, and with lower R2 (0.39-0.52) for P50, maximum hydraulic conductivity or frequency of ray parenchyma. We found that certain wavenumbers improve models' calibration, with those in the range of 4000-5500 cm-1 predicting the highest number of both anatomical and functional traits. We concluded that the use of NIRS allows calibrating models with potential predictive value not only for wood structural and chemical variables but also for anatomical and functional traits related to drought resistance in wood types with complex structure as eucalypts. These results are promising in light of the required knowledge about species and genotypes adaptability to global climatic change.

Common microgeographical selection patterns revealed in four European conifers.

Microgeographical adaptation occurs when the effects of directional selection persist despite gene flow. Traits and genetic loci under selection can then show adaptive divergence, against the backdrop of little differentiation at other traits or loci. How common such events are and how strong the selection is that underlies them remain open questions. Here, we discovered and analysed microgeographical patterns of genomic divergence in four European and Mediterranean conifers with widely differing life-history traits and ecological requirements (Abies alba MIll., Cedrus atlantica [Endl.] Manetti, Pinus halepensis Mill. and Pinus pinaster Aiton) by screening pairs from geographically close forest stands sampled along steep ecological gradients. We inferred patterns of genomic divergence by applying a combination of divergence outlier detection methods, demographic modelling, Approximate Bayesian Computation inferences and genomic annotation to genomic data. Surprisingly for such small geographical scales, we showed that selection is strong in all species but generally affects different loci in each. A clear signature of selection was systematically detected on a fraction of the genome, of the order of 0.1%-1% of the loci depending on the species. The novel modelling method we designed for estimating selection coefficients showed that the microgeographical selection coefficient scaled by population size (Ns) was 2-30. Our results convincingly suggest that selection maintains within-population diversity at microgeographical scales in spatially heterogeneous environments. Such genetic diversity is likely to be a major reservoir of adaptive potential, helping populations to adapt under fluctuating environmental conditions.

Narrow vessels cavitate first during a simulated drought in Eucalyptus camaldulensis.

Establishing drying-limits for mortality of different tree species and understanding the anatomical and physiological traits involved is crucial to predict forests' responses to climate change. The xylem of Eucalyptus camaldulensis presents a complex of solitary vessels surrounded by different imperforate tracheary elements and parenchyma that influence, in a poorly known way, its hydraulic functioning. We aimed at describing the dynamics of embolism propagation in this type of xylem, seeking any vessel-size pattern, and unraveling the threshold of xylem embolism leading to nonrecovery after drought in E. camaldulensis. We assigned potted saplings to a protracted water-stress for 70 days. We relied on colorimetric and hydraulic methods to test for links between xylem anatomy and embolism propagation in the main stem. On average, the occurrence of embolism was randomly distributed in the stem xylem, but the probability of embolized vessels was higher than predicted by chance in the narrowest vessels of individuals that experienced low to moderate water-stress. The saplings could recover from severe water-stress if their percentage loss of conductance (PLC) was <77%, but not when the PLC was ˃ 85%. We concluded that, contrary to results reported for most species, the narrowest vessels are the most vulnerable to cavitation in E. camaldulensis, suggesting a lack of tradeoff between xylem efficiency and safety (in response to drought) at the tissue level. These results challenge the well-established paradigm of the effect of vessel size on cavitation, which states that the widest conduits are the most vulnerable to both freeze-thaw and drought-induced cavitation.

Environmental and developmental factors driving xylem anatomy and micro-density in black spruce.

Wood density is the product of carbon allocation for structural growth and reflects the trade-off between mechanical support and water conductivity. We tested a conceptual framework based on the assumption that micro-density depends on direct and indirect relationships with endogenous and exogenous factors. The dynamics of wood formation, including timings and rates of cell division, cell enlargement, and secondary wall deposition, were assessed from microcores collected weekly between 2002 and 2016 from five black spruce stands located along a latitudinal gradient in Quebec, Canada. Cell anatomy and micro-density were recorded by anatomical analyses and X-ray measurements. Our structural equation model explained 80% of micro-density variation within the tree-ring with direct effects of wall thickness (σ = 0.61), cell diameter (σ = -0.51), and photoperiod (σ = -0.26). Wood formation dynamics had an indirect effect on micro-density. Micro-density increased under longer periods of cell-wall deposition and shorter durations of enlargement. Our results fill a critical gap in understanding the relationships underlying micro-density variation in conifers. We demonstrated that short-term responses to environmental variations could be overridden by plastic responses that modulate cell differentiation. Our results point to wood formation dynamics as a reliable predictor of carbon allocation in trees.

Phenotypic plasticity of European larch radial growth and wood density along a-1,000 m elevational gradient.

Phenotypic plasticity is a key mechanism for sedentary long-living species to adjust to changing environment. Here, we use mature Larix decidua tree-ring variables collected along an elevational transect in the French Alps to characterize the range of individual plastic responses to temperature. Stem cores from 821 mature Larix decidua trees have been collected from four plots distributed along a 1,000-m elevational gradient in a natural forest to build up individual linear reaction norms of tree-ring microdensity traits to temperature. The sign, magnitude and spread of variations of the slopes of the individual reaction norms were used to characterize variation of phenotypic plasticity among plots and traits. Results showed a large range of phenotypic plasticity (with positive and negative slopes) at each elevational plot and for each tree-ring variable. Overall, phenotypic plasticity tends to be larger but positive at higher elevation, negative at the warmer lower sites, and more variable in the center of the elevation distribution. Individual inter-ring reaction norm is a valuable tool to retrospectively characterize phenotypic plasticity of mature forest trees. This approach applied to Larix decidua tree-ring micro-density traits along an elevation gradient showed the existence of large inter-individual variations that could support local adaptation to a fast-changing climate.

Overexpression of MADS-box Gene AGAMOUS-LIKE 12 Activates Root Development in Juglans sp. and Arabidopsis thaliana.

Until recently, the roles of plant MADS-box genes have mainly been characterized during inflorescence and flower differentiation. In order to precise the roles of AGAMOUS-LIKE 12, one of the few MADS-box genes preferentially expressed in roots, we placed its cDNA under the control of the double 35S CaMV promoter to produce transgenic walnut tree and Arabidopsis plants. In Juglans sp., transgenic somatic embryos showed significantly higher germination rates but abnormal development of their shoot apex prevented their conversion into plants. In addition, a wide range of developmental abnormalities corresponding to ectopic root-like structures affected the transgenic lines suggesting partial reorientations of the embryonic program toward root differentiation. In Arabidopsis, AtAGL12 overexpression lead to the production of faster growing plants presenting dramatically wider and shorter root phenotypes linked to increased meristematic cell numbers within the root apex. In the upper part of the roots, abnormal cell divisions patterns within the pericycle layer generated large ectopic cell masses that did not prevent plants to grow. Taken together, our results confirm in both species that AGL12 positively regulates root meristem cell division and promotes overall root vascular tissue formation. Genetic engineering of AGL12 expression levels could be useful to modulate root architecture and development.

Dissecting the space-time structure of tree-ring datasets using the partial triadic analysis.

Tree-ring datasets are used in a variety of circumstances, including archeology, climatology, forest ecology, and wood technology. These data are based on microdensity profiles and consist of a set of tree-ring descriptors, such as ring width or early/latewood density, measured for a set of individual trees. Because successive rings correspond to successive years, the resulting dataset is a ring variables × trees × time datacube. Multivariate statistical analyses, such as principal component analysis, have been widely used for extracting worthwhile information from ring datasets, but they typically address two-way matrices, such as ring variables × trees or ring variables × time. Here, we explore the potential of the partial triadic analysis (PTA), a multivariate method dedicated to the analysis of three-way datasets, to apprehend the space-time structure of tree-ring datasets. We analyzed a set of 11 tree-ring descriptors measured in 149 georeferenced individuals of European larch (Larix decidua Miller) during the period of 1967-2007. The processing of densitometry profiles led to a set of ring descriptors for each tree and for each year from 1967-2007. The resulting three-way data table was subjected to two distinct analyses in order to explore i) the temporal evolution of spatial structures and ii) the spatial structure of temporal dynamics. We report the presence of a spatial structure common to the different years, highlighting the inter-individual variability of the ring descriptors at the stand scale. We found a temporal trajectory common to the trees that could be separated into a high and low frequency signal, corresponding to inter-annual variations possibly related to defoliation events and a long-term trend possibly related to climate change. We conclude that PTA is a powerful tool to unravel and hierarchize the different sources of variation within tree-ring datasets.

Comprehensive genetic dissection of wood properties in a widely-grown tropical tree: Eucalyptus.

BACKGROUND: Eucalyptus is an important genus in industrial plantations throughout the world and is grown for use as timber, pulp, paper and charcoal. Several breeding programmes have been launched worldwide to concomitantly improve growth performance and wood properties (WPs). In this study, an interspecific cross between Eucalyptus urophylla and E. grandis was used to identify major genomic regions (Quantitative Trait Loci, QTL) controlling the variability of WPs. RESULTS: Linkage maps were generated for both parent species. A total of 117 QTLs were detected for a series of wood and end-use related traits, including chemical, technological, physical, mechanical and anatomical properties. The QTLs were mainly clustered into five linkage groups. In terms of distribution of QTL effects, our result agrees with the typical L-shape reported in most QTL studies, i.e. most WP QTLs had limited effects and only a few (13) had major effects (phenotypic variance explained > 15%). The co-locations of QTLs for different WPs as well as QTLs and candidate genes are discussed in terms of phenotypic correlations between traits, and of the function of the candidate genes. The major wood property QTL harbours a gene encoding a Cinnamoyl CoA reductase (CCR), a structural enzyme of the monolignol-specific biosynthesis pathway. CONCLUSIONS: Given the number of traits analysed, this study provides a comprehensive understanding of the genetic architecture of wood properties in this Eucalyptus full-sib pedigree. At the dawn of Eucalyptus genome sequence, it will provide a framework to identify the nature of genes underlying these important quantitative traits.