Exploring the impact of alignment media on RDC analysis of phosphorus-containing compounds: a molecular docking approach.

Residual dipolar couplings (RDCs) are employed in NMR analysis when conventional methods, such as J-couplings and nuclear Overhauser effects (NOEs) fail. Low-energy (optimized) conformers are often used as input structures in RDC analysis programs. However, these low-energy structures do not necessarily resemble conformations found in anisotropic environments due to interactions with the alignment medium, especially if the analyte molecules are flexible. Considering interactions with alignment media in RDC analysis, we developed and evaluated a molecular docking-based approach to generate more accurate conformer ensembles for compounds in the presence of the poly-γ-benzyl-L-glutamate alignment medium. We designed chiral phosphorus-containing compounds that enabled us to utilize 31P NMR parameters for the stereochemical analysis. Using P3D/PALES software to evaluate diastereomer discrimination, we found that our conformer ensembles outperform moderately the standard, low-energy conformers in RDC analysis. To further improve our results, we (i) averaged the experimental values of the molecular docking-based conformers by applying the Boltzmann distribution and (ii) optimized the structures through normal mode relaxation, thereby enhancing the Pearson correlation factor R and even diastereomer discrimination in some cases. Nevertheless, we presume that significant differences between J-couplings in isotropic and in anisotropic environments may preclude RDC measurements for flexible molecules. Therefore, generating conformer ensembles based on molecular docking enhances RDC analysis for mildly flexible systems while flexible molecules may require applying more advanced approaches, in particular approaches including dynamical effects.

Palladium(II) and Platinum(II) Bis(Stibinidene) Complexes with Intramolecular Hydrogen-Bond Enforced Geometries.

The coordination capability of two N,C,N pincer coordinated stibinidenes, i. e. bis(imino)- [2,6-(DippN=CH)2 C6 H3 ]Sb (1) or imino-amino- [2-(DippN=CH)-6-(DippNHCH2 )C6 H3 ]Sb (2) toward palladium(II) and platinum(II) centers was examined. In the course of this study, seven new square-planar bis(stibinidene) complexes were synthesized and characterized by NMR, IR, Raman, UV-vis spectroscopy and single crystal (sc)-X-ray diffraction analysis. In all cases, both stibinidene ligands 1 or 2 adopt trans positions, but differ significantly in the torsion angle describing mutual orientation of aromatic rings of the stibinidenes along the Sb-Pd/Pt-Sb axes. Furthermore, majority of complexes form isomers in solution most probably due to a hindered rotation around Sb-Pd/Pt bonds caused by bulkiness of 1 and 2. This phenomenon also seems to be influenced by the absence/presence of a pendant -CH2 NH- group in 1/2 that is able to form intramolecular hydrogen bonds with the adjacent chlorine atom(s) attached to the metal centers. The whole problem was subjected to a theoretical study focusing on the role of hydrogen bonds in structure architecture of the complexes. To describe the UV-vis spectra of these highly coloured complexes, TD-DFT calculations were employed. These outline differences between the stibinidene ligands, the transition metals as well as between the charge of the complexes (neutral or anionic).

B-substituted group 1 phosphides: synthesis and reactivity.

1-Boryl-8-phosphinonaphthalenes 1-BCy2-8-PCl2-C10H6 (1) and 1-BCy2-8-PPhCl-C10H6 (2) were prepared and used as starting materials for the synthesis of B-substituted phosphides. The reduction of 1 and 2 by Mg provided neutral compounds [1-BCy-8-PCy-C10H6]2 (3) and [1-BCy2-8-PPh-C10H6]2 (4). Compound 3 represents the dimer of phosphinoborane 1-BCy-8-PCy-C10H6 while complex 4 is a rare example of a discrete B ← P coordinated diphosphine. The reduction of 2 by Na or K in THF yielded B-substituted group 1 phosphides [Na(THF)3]+[1-BCy2-8-PPh-C10H6]- (5) and {[K(THF)2]+[1-BCy2-8-PPh-C10H6]-}∞ (6), which structurally resembled bulky group 1 phosphides. Complex 5 showed easy activation of elemental chalcogens E (E = O, S, Se) to give B-substituted chalcogenophosphinites {[Na(THF)2]+[1-BCy2-8-P(E)Ph-C10H6]}2 (E = O (7), S (8), Se (9)) as the products of chalcogen insertion into the P-Na bond. Importantly no oxidation to dichalcogenophosphinates was observed. Compound 5 is tolerant of the CO polar bonds in organic substrates and the reactions of 5 with 2,3-butanedione or an acyl chloride provided {[Na(THF)2]+[1-BCy2-8-P{CHC(O)C(Me)O}Ph-C10H6]-}2 (10) and [1-BCy2-8-P{C(O)tBu}Ph-C10H6] (11). Finally, B-coordinated phosphatetrylenes [1-BCy2-8-P(SnL)Ph-C10H6] (12) and [1-BCy2-8-P(PbL)Ph-C10H6] (13) (L is {2,6-(Me2NCH2)C6H3}-) were also prepared by substitution reactions of 5.

N-Coordinated tellurenium(II) and telluronium(IV) cations: synthesis, structure and hydrolysis.

A set of N-coordinated tellurium(II) compounds containing either C,N-chelating ligands CNR (where CN = 2-(RNCH)C6H4, R = tBu or Dipp; Dipp = 2,6-iPr2C6H3) or N,C,N pincer ligands NCNR (where NCN = 2,6-(RNCH)2C6H4, R = tBu or Dipp) were synthesized. In the case of C,N-chelated compounds, the reaction of CNDippLi with Te(dtc)2 (where dtc = Et2NCS2) in a 1 : 1 molar ratio smoothly provided the carbamate CNDippTe(dtc) which upon treatment with 2 eq. of HCl provided the chloride CNDippTeCl. In contrast, the analogous conversion of NCNRLi with Te(dtc)2 surprisingly furnished ionic bromides [NCNRTe]Br as a result of the exchange of dtc by Br coming from nBuBr present in the reaction mixture. Furthermore, the reaction of CNDippTeCl or [NCNRTe]Br with silver salts AgX (X = OTf or SbF6) provided the expected tellurenium cations [CNDippTe]SbF6 and [NCNRTe]X. To further increase the Lewis acidity of the central atom, the oxidation of selected compounds with 1 eq. of SO2Cl2 was examined yielding stable compounds [CNtBuTeCl2]X and [NCNtBuTeCl2]X. The oxidation of the Dipp substituted compounds proved to be more challenging and an excess of SO2Cl2 was necessary to obtain the oxidized products [CNDippTeCl2]SbF6 and [NCNDippTeCl2]SbF6, which could solely be characterized in solution. Compounds [CNtBuTeCl2]OTf and [NCNtBuTeCl2]OTf were shown to undergo a controlled hydrolysis to the corresponding telluroxanes. All compounds were studied by multinuclear NMR spectroscopy in solution and for selected compounds solid state 125Te NMR spectroscopy and single-crystal X-ray diffraction analysis were performed. The Lewis acidity of the studied cations was examined by the Gutmann-Beckett method using Et3PO as the probing agent. The Te-N chalcogen bonding situation of selected compounds has also been examined computationally by a set of real-space bonding indicators.

Direct Cyclopalladation of Fluorinated Benzyl Amines by Pd3(OAc)6: The Coexistence of Multinuclear Pdn Reaction Pathways Highlights the Importance of Pd Speciation in C-H Bond Activation.

Palladacycles are key intermediates in catalytic C-H bond functionalization reactions and important precatalysts for cross-couplings. It is commonly believed that palladacycle formation occurs through the reaction of a substrate bearing a C-H bond ortho to a suitable metal-directing group for interaction with, typically, mononuclear "Pd(OAc)2" species, with cyclopalladation liberating acetic acid as the side product. In this study, we show that N,N-dimethyl-fluoro-benzyl amines, which can be cyclopalladated either ortho or para to fluorine affording two regioisomeric products, can occur by a direct reaction of Pd3(OAc)6, proceeding via higher-order cyclopalladated intermediates. Regioselectivity is altered subtly depending on the ratio of substrate:Pd3(OAc)6 and the solvent used. Our findings are important when considering mechanisms of Pd-mediated reactions involving the intermediacy of palladacycles, of particular relevance in catalytic C-H bond functionalization chemistry.

Synthesis and reactivity of alkali metal aluminates bearing bis(organoamido)phosphane ligand.

In this study, we report a group of alkali metal aluminates bearing bis(organoamido)phosphane ligand. The starting complex {[PhP(NtBu)2]AlMe2}Li·OEt2 (1) was prepared by stepwise deprotonation of the parent PhP(NHtBu)2 by nBuLi and AlMe3. Further derivatization of aluminate 1 was performed by the virtual substitution of lithium -{[PhP(NtBu)2]AlMe2}K (2), methyl substituents - {[PhP(NtBu)2]AlH2}Li·THF (3), modification of steric bulk and induction effects on the phosphorus atom - {[tBuP(N-2,6-iPr2C6H3)2]AlMe2}Li·(OEt2)2 (4), and phosphorus atom oxidation state {[Ph(Y)P(NtBu)2]AlMe2}Li (Y = O (5), S (6), Se (7), Te (8)). The structure causing non-covalent interactions in 1-4 were evaluated with the help of theoretical calculations and topological analysis ranging from π-electron system-metal to agostic interactions of various types. The further reactions of 1 with various nucleophiles were found to be a versatile tool for the preparation of iminophosphonamides via the formation of P-E bond (E = Si, Ge, Sn, Pb, P, and C) and followed by P(III) → P(V) tautomeric shift.

Carbazole-Fluorene Copolymers with Various Substituents at the Carbazole Nitrogen: Structure-Properties Relationship.

Carbazole derivatives, carbazole-containing polymers and iridium complexes are of interest due to many possible applications in photonics, electronics and biology, particularly as active or hole-transporting layers in organic as well as perovskite devices due to their interesting properties. Here, a series of carbazole-fluorene conjugated copolymers with various substituents at the N-carbazole position (2-methoxycarbonylethyl, 2-carboxyethyl, 2-ethylhexyl, and nonan-2,4-dionatoiridium(III)bis(2-phenylpyridine-N,C2')-9-yl) was prepared by Suzuki coupling. Their photophysical, electrochemical and electroluminescence (EL) properties were studied. Effects of molecular weight and substituents attached to carbazole unit on their properties are reported. The carbazole-fluorene copolymers in dilute solutions exhibited intense photoluminescence (PL) emission in the blue spectral region with high PL quantum yields (78-87%) except for the copolymer with the iridium complex (23%). Similar PL spectra were observed in dilute solutions. More pronounced differences were found in thin film PL and EL properties due to excimer/aggregate formation. Light-emitting devices (LEDs) made of copolymers with 2-ethylhexyl as N-carbazole substituent exhibited efficient EL emission with the best performance and the lowest EL onset voltages (3-4 V), while the LEDs made of copolymers with other substituents were not as efficient, but showed anomalous behavior and memory effects in current-voltage characteristics promising also for bio-inspired electronics.

Switchable cyclopalladation of substrates containing two directing groups: on the way to non-symmetrical [2.2]-dipalladaparacyclophanes.

Simple switching of the site-selectivity of C-H activation reactions of substrates containing multiple directing groups is particularly important for the so-called late stage functionalization synthetic approach. In this work, we verified the possibility of achieving this by adding acids of different strengths. Using a substrate containing two differently strong (and basic) directing groups, the influence of the addition of acids on the regioselectivity of the C-H activation step of the reaction with palladium acetate was thoroughly studied. The addition of no or weak acids results in cyclopalladation being controlled by a stronger directing group. However, the addition of a strong acid causes protonation of this group and the reaction is then controlled by a weaker directing group. Finally, this approach enables double C-H activation leading to a unique class of compounds: "non-symmetrical" [2.2]-dipalladaparacyclophanes.

Can Copper(I) and Silver(I) be Hydrogen Bond Acceptors?

Gold(I) centers can form moderately strong (Au⋅⋅⋅H) hydrogen bonds with tertiary ammonium groups, as has been demonstrated in the 3AuCl+ (3+ =1-(tert-butyl)-3-phenyl-4-(2-((dimethylammonio)methyl)phenyl)-1,2,4-triazol-5-ylidene) complex. However, similar hydrogen bonding interactions with isoelectronic silver(I) or copper(I) centers are unknown. Herein, we first explored whether the Au⋅⋅⋅H bond originally observed in 3AuCl+ can be strengthened by replacing Cl with Br or I. Experimental gas-phase IR spectra in the ∼3000 cm-1 region showed only a small effect of the halogen on the Au⋅⋅⋅H bond. Next, we measured the spectra of 3AgCl+ , which exhibited significant differences compared to its 3AuX+ counterparts. The difference has been explained by DFT calculations which indicated that the Ag⋅⋅⋅H interaction is only marginal in this complex, and a Cl⋅⋅⋅H hydrogen bond is formed instead. Calculations predicted the same for the 3CuCl+ complex. However, we noticed that for Ag and Cu complexes with less flexible ligands, such as dimethyl(2-(dimethylammonio)phenyl)phosphine (L7 H+ ), the computations predict the presence of the respective Ag⋅⋅⋅H and Cu⋅⋅⋅H hydrogen bonds, with a strength similar to the Au⋅⋅⋅H bond in 3AuCl+ . We, therefore, propose possible complexes where the presence of (Ag/Cu)⋅⋅⋅H bonds could be experimentally verified to broaden our understanding of these unusual interactions.

Oxidations of N-coordinated Arsinidene and Stibinidene by Substituted Quinones: A Remarkable Follow-Up Reactivity.

The reactivity of pnictinidenes [2-(DippN=CH)-6-(DippNHCH2 )C6 H3 ]E (where E=As (1) or Sb (2)) toward substituted ortho- and para-quinones is reported. The central pnictogen atom is easily oxidized by ortho-quinones closing five-membered EO2 C2 ring. The oxidized antimony derivatives are stable species, while in the case of arsenic compounds the hydrogen of the pendant amino NHCH2 group cleaves one newly formed As-O bonds leading to the closure of a new azaarsole ring. Furthermore, a heating of these arsenic heterocycles resulted in a C-H bond activation at the NCH2 group involved in this heterocycle followed by a reductive elimination of corresponding catechols and arsinidene [2,6-(DippN=CH)C6 H3 ]As. Using of para-quinones, resulted in the oxidation of the central atom with a concomitant hydrogen migration from NHCH2 group even in the case of the antimony derivatives. The reductive elimination of hydroquinones is in this case feasible for all compounds. Studied compounds were characterized by multi-nuclear NMR, IR and Raman spectroscopy and single-crystal X-ray diffraction analysis. The theoretical study focusing the key compounds and reactions is also included.

The reactivity of antimony and bismuth N,C,N-pincer compounds toward K[BEt3H] - the formation of heterocyclic compounds vs. element-element bonds vs. stable terminal Sb-H bonds.

The oxidative addition of CF3SO3CH2Si(CH3)3 (NpSiOTf) toward organopnictogen(I) N,C,N-pincer compounds, i.e. [2,6-(DippNCH)2C6H3]E (1-E, where E = Sb, Bi; Dipp = 2,6-iPr2C6H3) produced compounds [2,6-(DippNCH)2C6H3]E(NpSi)(OTf) (2-E, where E = Sb, Bi). By analogy, the in situ reduction of [2,6-(Me2NCH2)2C6H3]ECl2 (3-E, where E = Sb, Bi) followed by treatment with NpSiOTf or MeI gave compounds [2,6-(Me2NCH2)2C6H3]E(R)(X) (R/X = NpSi/OTf 4-E, where E = Sb, Bi; R/X = Me/I 5-Sb). The reactivity of these compounds toward 1 eq. of K[BEt3H] was examined showing remarkable differences depending both on the ligand backbone and the pnictogen used. Thus in the case of 2-E, the addition of the hydride across the imino-function was achieved thereby yielding azapnicta-heterocyclic compounds [2-(DippNCH2)-6-(DippNCH)C6H3]E(NpSi) (6-E, where E = Sb, Bi). The same reaction of 4-Bi produced dibismuthine {[2,6-(Me2NCH2)2C6H3]Bi(NpSi)}2 (7-Bi), but in the case of 4/5-Sb the analogous distibines {[2,6-(Me2NCH2)2C6H3]Sb(R)}2 (R = NpSi7-Sb, Me 8-Sb) were not formed directly and hydrides [2,6-(Me2NCH2)2C6H3]Sb(R)H (R = NpSi9-Sb, Me 10-Sb) could be isolated instead. Nevertheless, heating of both 9-Sb and 10-Sb led to an activation of a labile Sb-H bond and the formation of distibines 7/8-Sb.

Colour-tuneable solid-state fluorescence of crystalline powders formed from push-pull substituted 2,5-diphenyl-stilbenes.

The solid-state fluorescence (SSF) of eight DPA-DPS-EWG derivatives (DPA = diphenylamino, DPS = 2,5-diphenyl-stilbene building block, EWG = electron withdrawing group) was studied. Varying the strength of the EWG enabled the tuning of the LUMO energy within a range broader than 1 eV, while the simultaneous changes of HOMO energy were less than 0.1 eV, according to cyclic voltammetry. The fluorescence maxima in dichloromethane laid between 483 and 752 nm and exhibited monoexponential decay and a photoluminescence quantum yield (PLQY) always higher than 35%. Six derivatives with a SSF PLQY higher than 10% in polycrystalline powder form continuously covered the range from 475 to 733 nm. Three components of SSF multiexponential decay, obtained by time-resolved fluorescence spectroscopy, were ascribed to exciton migration to nonfluorescent traps, and monomer-like and aggregate fluorescence. The character of the emitting aggregates was evaluated by quantum chemical modelling based on time-dependent density functional theory computations, carried out on the dimer arrangements obtained by X-ray diffractometry of the single crystals.

Beyond simple hetero Diels-Alder cycloadditions. A new type of element-ligand cooperativity at N,C,N-coordinated arsinidene and stibinidene centres in the reaction with an electron-deficient alkyne.

The reactivity of two types of organopnictogen(I) N,C,N-pincer ligand coordinated compound, i.e. [2,6-(DippNCH)2C6H3]E (1-E, where E = As, Sb, Bi; Dipp = 2,6-iPrC6H3) and [2-(DippNCH)-6-(DippNHCH2)C6H3]E (6-E, where E = As or Sb), toward an electron-deficient alkyne, i.e. dimethyl acetylenedicarboxylate (DMAD), is reported. All reactions represent remarkable examples of element-ligand cooperation (ELC). In the first step, all compounds react via dearomatization of a latent heteropnictole ring producing rare examples of hetero Diels-Alder (DA) adducts. These compounds then smoothly convert to 1-arsanaphthalenes via hydrogen migration, thereby recovering the aromatic 10π-electron system. Furthermore, in the case of bis(imino) derivatives of 1-E, heating of DA adducts in pyridine led to a hydrogenation of the triple bond of DMAD with the concomitant recovery of the univalent pnictinidene centre, which is in turn able to activate the second molecule of DMAD. In contrast, the non-symmetric derivative of 6-As upon heating in pyridine produced bicyclic trivalent arsenic compounds as a result of an attack of the pendant secondary NH group into the arsa-heterocyclic system. For 6-Sb, a remarkable stoichiometric hydrogenation of the DMAD molecule was observed by NMR spectroscopy involving the reductive elimination of dimethylfumarate in the final step of the reaction sequence. The whole study is accompanied by a theoretical survey that describes the main thermodynamic parameters of the reported reactions and explains the reaction pathways observed in the experiments.

Reactivity of a N-Coordinated Germylene-Borane Complex: From Ge→B to Ge→Ga Coordination.

Reactivity studies of the GeII →B complex L(Cl)Ge⋅BH3 (1; L=2-Et2 NCH2 -4,6-tBu2 -C6 H2 ) were performed to determine the effect on the GeII →B donation. N-coordinated compounds L(OtBu)Ge⋅BH3 (2) and [LGe⋅BH3 ]2 (3) were prepared. The possible tuning of the GeII →B interaction was proved experimentally, yielding compounds 1-PPh2 -8-(LGe)-C10 H6 (4) and L(Cl)Ge⋅GaCl3 (5) without a GeII →B interaction. In 5, an unprecedented GeII →Ga coordination was revealed. The experimental results were complemented by a theoretical study focusing on the bonding in 1-5. The different strength of the GeII →E (E=B, Ga) donation was evaluated by using energy decomposition analysis. The basicity of different L(X)Ge groups through proton affinity is also assessed.

Lithium, Magnesium, and Zinc Centers N,N'-Chelated by an Amine-Amide Hybrid Ligand.

The synthesis and structure of lithium, magnesium, and zinc complexes N,N'-chelated by a hybrid amine-amido ligand ([2-(Me2NCH2)C6H4NR]-, abbreviated as LNR, where R = H, SiMe3, or Bn) are reported. The reaction of the least sterically demanding LNH with various magnesium sources gives the hexameric imide [LNMg]6 (4) by the elimination of n-butane from LNHMgnBu (2) or by the reaction of LNHLi (1) with MeMgBr. [LNH]2Mg (3) is obtained through the addition of 0.5 equiv of nBu2Mg or Mg[N(SiMe3)2]2 to LNH2 and with 1 equiv of nBu2Mg reacting to 2. Both LNHMgN(SiMe3)2 (6) and isostructural LNHZnN(SiMe3)2 (16) have been prepared using two different approaches: monodeprotonation of LNH2 by Zn/Mg[N(SiMe3)2]2 in a 1:1 ratio or ligand substitution of 2 or LNHZnEt (12) by 0.5 equiv of Sn[N(SiMe3)2]2. The reactions of 2 or 3 with 1 provide the heterotrimetallic complex [LNH]4Li2Mg (5). Benzyl- or trimethylsilyl-substituted anilines [LN(SiMe3)H (7) and LN(Bn)H (8)] with 0.5 equiv of nBu2Mg allow the formation of homoleptic bis(amides) of the [LN(R)]2Mg type (10 and 11). Nevertheless, only the silylated secondary amine 7 is able to provide the heteroleptic n-butylmagnesium amide LN(SiMe3)MgnBu (9) upon reaction with an equimolar amount of nBu2Mg. Similarly, 12, [LNH]2Zn (13), LN(R)ZnEt (17 and 18), and [LN(R)]2Zn [R = SiMe3 (19) and Bn (20)] were prepared by the monodeprotonation of LNH2 or LN(R)H using Et2Zn in the corresponding stoichiometric ratio. LNHZnI was prepared by the nucleophilic substitution of an ethyl chain in 12 by molecular iodine. A heterometallic complex, [LNH]4Li2Zn (14), analogous to 5 was prepared from 12 or 13 with 1 or 2 equiv of 1, respectively.

Molecular Rearrangement of Pyrazino[2,3-c]quinolin-5(6H)-ones during Their Reaction with Isocyanic Acid.

New tetrahydropyrazino[2,3-c]quinolin-5(6H)-ones were prepared from 3-chloroquinoline-2,4(1H,3H)-diones and ethylene diamine. In their reaction with HNCO, an unprecedented molecular rearrangement produced new types of hydantoin derivatives. All prepared compounds were characterized on the basis of their 1H, 13C, and 15N NMR and ESI mass spectra and some were authenticated by X-ray analysis of single crystalline material. A proposed mechanism for rearrangement is discussed in this essay. The CDK and ABL inhibition activity as well as in vitro cytotoxicity of the prepared compounds was also tested.

Reversible addition of tin(II) amides to nitriles.

Lappert's stannylene (Sn[N(SiMe3)2]2) has been reacted with various nitriles, dinitriles and trinitriles with the formation of heteroleptic amidotin(II) amidinates of the general formulae [RC(NSiMe3)2]SnN(SiMe3)2, R'{[C(NSiMe3)2]SnN(SiMe3)2}2 and R''{[C(NSiMe3)2]SnN(SiMe3)2}3, where R = Ph (1), 2-(CN)-C6H4 (2), 3-(CN)-C6H4 (3); R' = 1,3-C6H4 (4), 1,4-C6H4 (5) and R'' = 1,3,5-C6H3 (6). The reactions of amidotin(II) benzamidinate 1 with an excess of benzonitrile proceed to homoleptic tin(II) bis(benzamidinate) [PhC(NSiMe3)2]2Sn, which reversibly eliminates benzonitrile and 1 when warmed. The premise of reversibility has been supported by a multinuclear time-dependent NMR study and a theoretical (DFT) description. On the other hand, magnesium(II) bis(benzamidinate) [PhC(NSiMe3)2]2Mg (8) and lanthanum(II) tris(benzamidinate) [PhC(NSiMe3)2]3La (7) have been synthesised from appropriate metal hexamethyldisilazides and benzonitrile.

Tetrazene-Characterization of Its Polymorphs.

The reinvestigation of tetrazene single crystalline material by means of X-ray methods resulted in a slightly different structure when compared to previously published data. Reaction conditions responsible for different crystalline modification formation were investigated. Newly described C form was found to be the primary reaction product and the combined action of temperature and the presence of water over time is required for the transition to the A form. Both forms were described by X-ray powder diffraction. Tetrazene was also subjected to infrared and Raman spectroscopy, which allowed differentiating between the forms. The molecule was isotopically labeled with 15N atoms at two different locations (ring and nitrogen sidechain) and employed in assigning vibrational modes to the resulting bands. Differences between sensitivities to mechanical stimuli of the two modifications were investigated and found industrially insignificant. In the same vein, the performance of either modification in primer composition and primer was identical.

Sn,P-coordinated Ru cation: a robust catalyst for aerobic oxidations of benzylamine and benzyl alcohol.

A stable ionic κ2Sn,P-coordinated Ru complex shows excellent catalytic activity in aerobic oxidations of benzylamine and benzyl alcohol. This complex is stabilized by a stannylene-phosphine peri-substituted naphthalene ligand, which can act as either a reducing agent for a Ru(III) complex or as a κ2Sn,P-chelating ligand for Ru(II) compounds.

On the edge of the steric repulsion and reactivity of bulky anilines; a case study of chloro(imino)phosphine synthesis.

2-Benzhydryl-4-methyl-6-(1,1'-diphenyl-2-phenyl-ethyl)aniline was prepared by a three-step process. 2,6-Bis(benzhydryl)-4-methyl-aniline was protected by Schiff coupling, then benzylated and finally dealkylated by using hydrochloric acid and methanol. The resulting compound exhibits one of the highest buried volumes around the nitrogen atom of anilines prepared so far, but it reacts with phosphorus trichloride and triethylamine to give a monomeric chloro(imino)phosphine.