Evaluating the utility of the Threshold of Toxicological Concern (TTC) and its exclusions in the biocompatibility assessment of extractable chemical substances from medical devices.

The Threshold of Toxicological Concern (TTC) is a pragmatic approach used to establish safe thresholds below which there can be no appreciable risk to human health. Here, a large inventory of ~45,000 substances (referred to as the LRI dataset) was profiled through the Kroes TTC decision module within Toxtree v3.1 to assign substances into their respective TTC categories. Four thousand and two substances were found to be not applicable for the TTC approach. However, closer examination of these substances uncovered several implementation issues: substances represented in their salt forms were automatically assigned as not appropriate for TTC when many of these contained essential metals as counter ions which would render them TTC applicable. High Potency Carcinogens and dioxin-like substances were not fully captured based on the rules currently implemented in the software. Phosphorus containing substances were considered exclusions when many of them would be appropriate for TTC. Refinements were proposed to address the limitations in the current software implementation. A second component of the study explored a set of substances representative of those released from medical devices and compared them to the LRI dataset as well as other toxicity datasets to investigate their structural similarity. A third component of the study sought to extend the exclusion rules to address application to substances released from medical devices that lack toxicity data. The refined rules were then applied to this dataset and the TTC assignments were compared. This case study demonstrated the importance of evaluating the software implementation of an established TTC workflow, identified certain limitations and explored potential refinements when applying these concepts to medical devices.

Integrated approach to elucidate metal-implant related adverse outcome pathways.

Exogenous metal particles and ions from implant devices are known to cause severe toxic events with symptoms ranging from adverse local tissue reactions to systemic toxicities, potentially leading to the development of cancers, heart conditions, and neurological disorders. Toxicity mechanisms, also known as Adverse Outcome Pathways (AOPs), that explain these metal-induced toxicities are severely understudied. Therefore, we deployed in silico structure- and knowledge-based approaches to identify proteome-level perturbations caused by metals and pathways that link these events to human diseases. We captured 177 structure-based, 347 knowledge-based, and 402 imputed metal-gene/protein relationships for chromium, cobalt, molybdenum, nickel, and titanium. We prioritized 72 proteins hypothesized to directly contact implant surfaces and contribute to adverse outcomes. Results of this exploratory analysis were formalized as structured AOPs. We considered three case studies reflecting the following possible situations: (i) the metal-protein-disease relationship was previously known; (ii) the metal-protein, protein-disease, and metal-disease relationships were individually known but were not linked (as a unified AOP); and (iii) one of three relationships was unknown and was imputed by our methods. These situations were illustrated by case studies on nickel-induced allergy/hypersensitivity, cobalt-induced heart failure, and titanium-induced periprosthetic osteolysis, respectively. All workflows, data, and results are freely available in https://github.com/DnlRKorn/Knowledge_Based_Metallomics/. An interactive view of select data is available at the ROBOKOP Neo4j Browser at http://robokopkg.renci.org/browser/.

Subacute Pulmonary Toxicity of Glutaraldehyde Aerosols in a Human In Vitro Airway Tissue Model.

Glutaraldehyde (GA) has been cleared by the Center for Devices and Radiological Health (CDRH) of the Food and Drug Administration (FDA) as a high-level disinfectant for disinfecting heat-sensitive medical equipment in hospitals and healthcare facilities. Inhalation exposure to GA is known to cause respiratory irritation and sensitization in animals and humans. To reproduce some of the known in vivo effects elicited by GA, we used a liquid aerosol exposure system and evaluated the tissue responses in a human in vitro airway epithelial tissue model. The cultures were treated at the air interface with various concentrations of GA aerosols on five consecutive days and changes in tissue function and structure were evaluated at select timepoints during the treatment phase and after a 7-day recovery period. Exposure to GA aerosols caused oxidative stress, inhibition of ciliary beating frequency, aberrant mucin production, and disturbance of cytokine and matrix metalloproteinase secretion, as well as morphological transformation. Some effects, such as those on goblet cells and ciliated cells, persisted following the 7-day recovery period. Of note, the functional and structural disturbances observed in GA-treated cultures resemble those found in ortho-phthaldehyde (OPA)-treated cultures. Furthermore, our in vitro findings on GA toxicity partially and qualitatively mimicked those reported in the animal and human survey studies. Taken together, observations from this study demonstrate that the human air-liquid-interface (ALI) airway tissue model, integrated with an in vitro exposure system that simulates human inhalation exposure, could be used for in vitro-based human hazard identification and the risk characterization of aerosolized chemicals.

PreS/MD: Predictor of Sensitization Hazard for Chemical Substances Released From Medical Devices.

In the United States, a pre-market regulatory submission for any medical device that comes into contact with either a patient or the clinical practitioner must include an adequate toxicity evaluation of chemical substances that can be released from the device during its intended use. These substances, also referred to as extractables and leachables, must be evaluated for their potential to induce sensitization/allergenicity, which traditionally has been done in animal assays such as the guinea pig maximization test (GPMT). However, advances in basic and applied science are continuously presenting opportunities to employ new approach methodologies, including computational methods which, when qualified, could replace animal testing methods to support regulatory submissions. Herein, we developed a new computational tool for rapid and accurate prediction of the GPMT outcome that we have named PreS/MD (predictor of sensitization for medical devices). To enable model development, we (1) collected, curated, and integrated the largest publicly available dataset for GPMT results; (2) succeeded in developing externally predictive (balanced accuracy of 70%-74% as evaluated by both 5-fold external cross-validation and testing of novel compounds) quantitative structure-activity relationships (QSAR) models for GPMT using machine learning algorithms, including deep learning; and (3) developed a publicly accessible web portal integrating PreS/MD models that can predict GPMT outcomes for any molecule of interest. We expect that PreS/MD will be used by both industry and regulatory scientists in medical device safety assessments and help replace, reduce, or refine the use of animals in toxicity testing. PreS/MD is freely available at https://presmd.mml.unc.edu/.

Evaluating the Sub-Acute Toxicity of Formaldehyde Fumes in an In Vitro Human Airway Epithelial Tissue Model.

Formaldehyde (FA) is an irritating, highly reactive aldehyde that is widely regarded as an asthmagen. In addition to its use in industrial applications and being a product of combustion reaction and endogenous metabolism, FDA-regulated products may contain FA or release FA fumes that present toxicity risks for both patients and healthcare workers. Exposure to airborne FA is associated with nasal neoplastic lesions in both animals and humans. It is classified as a Group 1 carcinogen by International Agency for Research on Cancer (IARC) based on the increased incidence of cancer in animals and a known human carcinogen in the Report on Carcinogens by National Toxicology Program (NTP). Herein, we systematically evaluated the tissue responses to FA fumes in an in vitro human air-liquid-interface (ALI) airway tissue model. Cultures were exposed at the air interface to 7.5, 15, and 30 ppm of FA fumes 4 h per day for 5 consecutive days. Exposure to 30 ppm of FA induced sustained oxidative stress, along with functional changes in ciliated and goblet cells as well as possible squamous differentiation. Furthermore, secretion of the proinflammatory cytokines, IL-1ß, IL-2, IL-8, GM-CSF, TNF-a and IFN-γ, was induced by repeated exposures to FA fumes. Expression of MMP-1, MMP-3, MMP-7, MMP-10, MMP-12, and MMP-13 was downregulated at the end of the 5-day exposure. Although DNA-damage was not detected by the comet assay, FA exposures downregulated the DNA repair enzymes MGMT and FANCD2, suggesting its possible interference in the DNA repair capacity. Overall, a general concordance was observed between our in vitro responses to FA fume exposures and the reported in vivo toxicity of FA. Our findings provide further evidence supporting the application of the ALI airway system as a potential in vitro alternative for screening and evaluating the respiratory toxicity of inhaled substances.

Toxicity of Ortho-phthalaldehyde Aerosols in a Human In Vitro Airway Tissue Model.

Ortho-phthalaldehyde (OPA) is a chemical disinfectant used for the high-level sterilization of heat-sensitive medical instruments. Although OPA is considered a safer alternative to glutaraldehyde, no exposure limits have been established for respiratory exposures to ensure the safety of OPA sterilization and the safe use of OPA-treated medical instruments. In order to address data gaps in the toxicological profile of OPA, we treated human in vitro air-liquid-interface (ALI) airway cultures at the air interface with various concentrations of OPA aerosols for 10 consecutive days. Temporal tissue responses were evaluated at multiple time points during the treatment phase as well as 10 days following the last exposure. The disturbance of glutathione (GSH) homeostasis occurred as early as 20 min following the first exposure, while oxidative stress persisted throughout the treatment phase, as indicated by the sustained induction of heme oxygenase-1 (HMOX-1) expression. Repeated exposures to OPA aerosols resulted in both functional and structural changes, including the inhibition of ciliary beating frequency, aberrant mucin production, decreases in airway secretory cells, and tissue morphological changes. While OPA-induced oxidative stress recovered to control levels after a 10 day recovery period, functional and structural alterations caused by the high concentration of OPA aerosols failed to fully recover over the observation period. These findings indicate that aerosolized OPA induces both transient and relatively persistent functional and structural abnormalities in ALI cultures under the conditions of the current study.

The Body's Cellular and Molecular Response to Protein-Coated Medical Device Implants: A Review Focused on Fibronectin and BMP Proteins.

Recent years have seen a marked rise in implantation into the body of a great variety of devices: hip, knee, and shoulder replacements, pacemakers, meshes, glucose sensors, and many others. Cochlear and retinal implants are being developed to restore hearing and sight. After surgery to implant a device, adjacent cells interact with the implant and release molecular signals that result in attraction, infiltration of the tissue, and attachment to the implant of various cell types including monocytes, macrophages, and platelets. These cells release additional signaling molecules (chemokines and cytokines) that recruit tissue repair cells to the device site. Some implants fail and require additional revision surgery that is traumatic for the patient and expensive for the payer. This review examines the literature for evidence to support the possibility that fibronectins and BMPs could be coated on the implants as part of the manufacturing process so that the proteins could be released into the tissue surrounding the implant and improve the rate of successful implantation.

Suboptimal UVA attenuation by broad spectrum sunscreens under outdoor solar conditions contributes to lifetime UVA burden.

BACKGROUND: Broad spectrum sunscreens with a sun protection factor (SPF) of 15 or greater are indicated to decrease the risk of skin cancer and early skin aging caused by the sun if used as directed with other sun protection measures. To determine whether sunscreen product performance is compromised under solar exposure and to test spectral uniformity of protection across the UVA spectrum, we tested broad spectrum sunscreens with a variety of active pharmaceutical ingredients (APIs) and in a variety of dosage forms. METHODS: A cross-sectional market survey of 32 sunscreen drug products containing either organic or inorganic APIs with SPFs of 15, 30, 50, and 70 was tested. UV doses were delivered via natural sun in Silver Spring, Maryland between June and September of 2017. RESULTS: Of the 32 sunscreen drug products, 6 products failed to meet their broad spectrum claim under solar exposure. Using FDA's new proposal to strengthen sunscreen broad spectrum requirements, spectral uniformity based on the mean sunscreen absorbance of UVA1(340-400 nm)/UV (290-400 nm) indicated that ~40% of sunscreen drug products tested had suboptimal UVA protection. CONCLUSION: US consumers may unknowingly be receiving up to 36% more transmitted UVA when selecting between similarly labeled broad spectrum sunscreen drug products with equivalent SPF values. FDA's new proposal may help decrease consumers' overall lifetime UVA burden. Spectral absorbance data on sunscreen performance can be used to further improve the coupling of broad spectrum protection to a product's SPF value so that consumers have improved proportional increases in UV protection.

Exploring current read-across applications and needs among selected U.S. Federal Agencies.

Read-across is a well-established data gap-filling technique applied for regulatory purposes. In US Environmental Protection Agency's New Chemicals Program under TSCA, read-across has been used extensively for decades, however the extent of application and acceptance of read-across among U.S. federal agencies is less clear. In an effort to build read-across capacity, raise awareness of the state of the science, and work towards a harmonization of read-across approaches across U.S. agencies, a new read-across workgroup was established under the Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM). This is one of several ad hoc groups ICCVAM has convened to implement the ICCVAM Strategic Roadmap. In this article, we outline the charge and scope of the workgroup and summarize the current applications, tools used, and needs of the agencies represented on the workgroup for read-across. Of the agencies surveyed, the Environmental Protection Agency had the greatest experience in using read-across whereas other agencies indicated that they would benefit from gaining a perspective of the landscape of the tools and available guidance. Two practical case studies are also described to illustrate how the read-across approaches applied by two agencies vary on account of decision context.

Particle Size Distribution Analysis of OTC Aerosol or Powder Drug Products With Potential for Inadvertent Inhalation Exposure to Consumers.

The potential for inadvertent inhalation of over-the-counter (OTC) aerosol/powder drug products for topical application requires understanding of the characteristic size distributions of the airborne particles or droplets generated when these products are used as per the directions on the product label. Particle/droplet size is an important factor in determining the depth of particle penetration into the respiratory system after inhalation. Because particles penetrating beyond the larynx into the lung may lead to adverse respiratory effects, OTC aerosol or powder drug product particle size distribution is important to characterize. In this study, laser diffraction was used to analyze the particle size distribution of 32 currently marketed OTC drug products as emitted after actuation or air dispersion from their final package. Among the products surveyed were sunscreens, antiperspirants, topical analgesics, skin protectants, and acne products. The results may be useful to the U.S. Food and Drug Administration in its mission to protect as well as promote public health.

Identification of a compound isolated from German chamomile (Matricaria chamomilla) with dermal sensitization potential.

German chamomile is one of the most popular herbal ingredients used in cosmetics and personal care products. Allergic skin reactions following topical application of German chamomile have been occasionally reported, although it is not fully understood which of the chemical constituents is responsible for this adverse effect. In the present work, three candidate sensitizers were isolated from German chamomile based on activity-guided fractionation of chamomile extracts tested using the in vitro KeratinoSens™ assay. The compounds were identified as the polyacetylene tonghaosu (1), and both trans- and cis-glucomethoxycinnamic acids (2 and 3). These three compounds were classified as non- to weakly reactive using in chemico methods; however, aged tonghaosu was found to be more reactive when compared to freshly isolated tonghaosu. The polyacetylene (1) constituent was determined to be chemically unstable, generating a small electrophilic spirolactone, 1,6-dioxaspiro[4.4]non-3-en-2-one (4), upon aging. This small lactone (4) was strongly reactive in both in chemico HTS- and NMR-DCYA methods and further confirmed as a potential skin sensitizer by Local Lymph Node Assay (LLNA).

Consensus Modeling for Prediction of Estrogenic Activity of Ingredients Commonly Used in Sunscreen Products.

Sunscreen products are predominantly regulated as over-the-counter (OTC) drugs by the US FDA. The "active" ingredients function as ultraviolet filters. Once a sunscreen product is generally recognized as safe and effective (GRASE) via an OTC drug review process, new formulations using these ingredients do not require FDA review and approval, however, the majority of ingredients have never been tested to uncover any potential endocrine activity and their ability to interact with the estrogen receptor (ER) is unknown, despite the fact that this is a very extensively studied target related to endocrine activity. Consequently, we have developed an in silico model to prioritize single ingredient estrogen receptor activity for use when actual animal data are inadequate, equivocal, or absent. It relies on consensus modeling to qualitatively and quantitatively predict ER binding activity. As proof of concept, the model was applied to ingredients commonly used in sunscreen products worldwide and a few reference chemicals. Of the 32 chemicals with unknown ER binding activity that were evaluated, seven were predicted to be active estrogenic compounds. Five of the seven were confirmed by the published data. Further experimental data is needed to confirm the other two predictions.

In Chemico Evaluation of Tea Tree Essential Oils as Skin Sensitizers: Impact of the Chemical Composition on Aging and Generation of Reactive Species.

Tea tree oil (TTO) is an essential oil obtained from the leaves of Melaleuca alternifolia, M. linariifolia, or M. dissitiflora. Because of the commercial importance of TTO, substitution or adulteration with other tea tree species (such as cajeput, niaouli, manuka, or kanuka oils) is common and may pose significant risks along with perceived health benefits. The distinctive nature, qualitative and quantitative compositional variation of these oils, is responsible for the various pharmacological as well as adverse effects. Authentic TTOs (especially aged ones) have been identified as potential skin sensitizers, while reports of adverse allergic reactions to the other tea trees essential oils are less frequent. Chemical sensitizers are usually electrophilic compounds, and in chemico methods have been developed to identify skin allergens in terms of their ability to bind to biological nucleophiles. However, little information is available on the assessment of sensitization potential of mixtures, such as essential oils, due to their complexity. In the present study, 10 "tea tree" oils and six major TTO constituents have been investigated for their sensitization potential using a fluorescence in chemico method. The reactivity of authentic TTOs was found to correlate with the age of the oils, while the majority of nonauthentic TTOs were less reactive, even after aging. Further thio-trapping experiments with DCYA and characterization by UHPLC-DAD-MS led to the identification of several possible DCYA-adducts which can be used to deduce the structure of the candidate reactive species. The major TTO components, terpinolene, α-terpinene, and terpinene-4-ol, were unstable under accelerated aging conditions, which led to the formation of several DCYA-adducts.

Simultaneous determination of cosmetics ingredients in nail products by fast gas chromatography with tandem mass spectrometry.

A rapid and sensitive gas chromatography with tandem mass spectrometry (GC-MS/MS) method has been developed and validated to quantitatively determine cosmetic ingredients, such as toluene, N-methylpyrrolidone, 2,4-dihydroxybenzophenone (benzophenone-1, BP-1), and diethylene glycol dimethacrylate, in nail products. In this procedure, test portions were extracted with acetone, followed by vortexing, sonication, centrifugation, and filtration. During the extraction procedure, BP-1 was derivatized making it amenable to GC-MS analysis, using N,O-​bis(trimethylsilyl)​trifluoroacetamide. The four ingredients were quantified by GC-MS/MS in an electron ionization mode. Four corresponding stable isotopically labeled analogues were selected as internal standards, which were added at the beginning of the sample preparation to correct for recoveries and matrix effects. The validated method was used to screen 34 commercial nail products for these four cosmetic ingredients. The most common ingredients detected in the nail products were toluene and BP-1. Toluene was detected in 26 products and ranged from 1.36 to 173,000µg/g. BP-1 ranged from 18.3 to 2,370µg/g in 10 products.

A fluorescence high throughput screening method for the detection of reactive electrophiles as potential skin sensitizers.

Skin sensitization is an important toxicological end-point in the risk assessment of chemical allergens. Because of the complexity of the biological mechanisms associated with skin sensitization, integrated approaches combining different chemical, biological and in silico methods are recommended to replace conventional animal tests. Chemical methods are intended to characterize the potential of a sensitizer to induce earlier molecular initiating events. The presence of an electrophilic mechanistic domain is considered one of the essential chemical features to covalently bind to the biological target and induce further haptenation processes. Current in chemico assays rely on the quantification of unreacted model nucleophiles after incubation with the candidate sensitizer. In the current study, a new fluorescence-based method, 'HTS-DCYA assay', is proposed. The assay aims at the identification of reactive electrophiles based on their chemical reactivity toward a model fluorescent thiol. The reaction workflow enabled the development of a High Throughput Screening (HTS) method to directly quantify the reaction adducts. The reaction conditions have been optimized to minimize solubility issues, oxidative side reactions and increase the throughput of the assay while minimizing the reaction time, which are common issues with existing methods. Thirty-six chemicals previously classified with LLNA, DPRA or KeratinoSens™ were tested as a proof of concept. Preliminary results gave an estimated 82% accuracy, 78% sensitivity, 90% specificity, comparable to other in chemico methods such as Cys-DPRA. In addition to validated chemicals, six natural products were analyzed and a prediction of their sensitization potential is presented for the first time.

Alternative testing methods for skin sensitization: NMR spectroscopy for probing the reactivity and classification of potential skin sensitizers.

Evaluating consumer products for potentially harmful side effects of chemical ingredients is important for the protection of both the consumer and those involved in the manufacturing process. In order to assess the risk potential of chemicals, regulatory agencies have encouraged the development of several in silico, in vitro, and in chemico methods as alternatives to eliminate or minimize the use of animals. To add structural information to the existing in chemico methods, an NMR-based method is proposed for probing the reactivity and classification of the potential electrophiles (E) using a model thiol, DCYA, as a nucleophile. The major advantage of the NMR method is the quantitation of the actual adduct, DCYA-E. The degree of reaction is here provided as a direct measurement of adduct formation and/or electrophile depletion, in contrast to other in chemico assays, e.g., ADRA and DPRA, where the reactivity is inferred from the quantification of the test nucleophile depletion. Moreover, the developed NMR method should serve as a qualitative and quantitative tool in understanding the site of reaction and other structural information associated with test sensitizer. This is particularly valuable and advantageous over methods encouraged by regulatory agencies, which merely provide quantification of the reaction but lack any structural information. Several compounds with multiple reaction sites were successfully tested with the proposed NMR method. Otherwise, these compounds have proven to be a challenge to identify and classify using existing alternative methods.

Determination of methylisothiazolinone and methylchloroisothiazolinone in cosmetic products by ultra high performance liquid chromatography with tandem mass spectrometry.

Isothiazolinone biocides are broad-spectrum preservatives that are widely used in cosmetics, household, and industrial products. An increase in the number of cases of allergic contact dermatitis to isothiazolinone preservatives, namely, methylisothiazolinone and methylchloroisothiazolinone, have been recently noticed. The Food and Drug Administration relies on analytical methods to quantify levels of use of cosmetic ingredients and support enforcement action against products that are not in compliance with the law. In this study, an efficient ultra high performance liquid chromatography with tandem mass spectrometry method was developed and validated for the determination of methylisothiazolinone and methylchloroisothiazolinone in selected cosmetic products. The lower limit of quantitation was determined to be 0.1 µg/g for both preservatives. A survey of 24 cosmetic products was conducted and found concentrations of methylisothiazolinone and methylchloroisothiazolinone ranging from not quantified, or below the lower limit of quantitation, to 89.64 µg/g and not quantified to 10.31 µg/g, respectively.

Quantitative Determination of α-Arbutin, ß-Arbutin, Kojic Acid, Nicotinamide, Hydroquinone, Resorcinol, 4-Methoxyphenol, 4-Ethoxyphenol, and Ascorbic Acid from Skin Whitening Products by HPLC-UV.

An HPLC-UV method was developed for the quantitative analysis of nine skin whitening agents in a single injection. These compounds are α-arbutin, ß-arbutin, kojic acid, nicotinamide, resorcinol, ascorbic acid, hydroquinone, 4-methoxyphenol, and 4-ethoxyphenol. The separation was achieved on a reversed-phase C18 column within 30 min. The mobile phase was composed of water and methanol, both containing 0.1% acetic acid (v/v). The stability of the analytes was evaluated at different pH values between 2.3 and 7.6, and the extraction procedure was validated for different types of skin whitening product matrixes, which included two creams, a soap bar, and a capsule. The best solvent system for sample preparation was 20 mM NaH2PO4 containing 10% methanol at pH 2.3. The analytical method was validated for accuracy, precision, LOD, and LOQ. The developed HPLC-UV method was applied for the quantitation of the nine analytes in 59 skin whitening products including creams, lotions, sera, foams, gels, mask sheets, soap bars, tablets, and capsules.

Quantitative determination of phenolic compounds by UHPLC-UV-MS and use of partial least-square discriminant analysis to differentiate chemo-types of Chamomile/Chrysanthemum flower heads.

A new rapid UHPLC-UV-QTOF/MS method has been developed for the simultaneous analysis of nine phenolic compounds [(Z)-2-ß-d-glucopyranosyloxy-4-methoxycinnamic acid (cis-GMCA), chlorogenic acid, (E)-2-ß-d-glucopyranosyloxy-4-methoxycinnamic acid (trans-GMCA), quercetagetin-7-O-ß-d-glucopyranoside, luteolin-7-O-ß-d-glucoside, apigenin-7-O-ß-d-glucoside, chamaemeloside, apigenin 7-O-(6″-O-acetyl-ß-d-glucopyranoside), apigenin] and one polyacetylene (tonghaosu) from the flower heads of Chamomile/Chrysanthemum samples. The chromatographic separation was achieved using a reversed phase C18 column with a mobile phase of water and acetonitrile, both containing 0.05% formic acid. The ten compounds were completely separated within 15min at a flow rate of 0.25mL/min with a 2µL injection volume. The different chemo-types of Chamomiles/Chrysanthemum displayed variations in the presence of chemical constituents. German Chamomile samples confirmed the presence of cis-GMCA, trans-GMCA, apigenin-7-O-ß-d-glucoside and tonghaosu as major constituents whereas Roman chamomile samples confirmed the presence of chamamaeloside and apigenin as major compounds. The Chrysanthemum morifolium samples showed the presence of luteolin-7-O-ß-d-glucose as the major compound. The method was applied for the analysis of various commercial products including capsules, tea bags, body and hair care products. LC-mass spectrometry with electrospray ionization (ESI) interface method is described for the evaluation of ten compounds in plant samples and commercial products. This method involved the detection of [M+Na](+) and [M+H](+) ions in the positive mode. Partial least squares discriminant analysis (PLS-DA) was used to visualize commercial samples quality and may be of value for discriminating between chamomile types and Chrysanthemum with regards to the relative content of individual constituents. The results indicated that the method is suitable as a quality control test for various Chamomile/Chrysanthemum samples and market products.

Human gene expression as a tool to determine horticultural maturity in a bioactive plant (Echinacea purpurea L. Moench).

A phenological study was conducted to determine the impact of harvest maturity on the immune-modulating properties of Echinacea purpurea. The aerial parts of this plant were collected during seven stages of development and were assayed for a common botanical marker for this species, cichoric acid. Plants of selected development stages were also assayed for total polysaccharides and compared for their immune-modulating effects on the THP-1 monocyte/macrophage cell line by means of a gene expression study. Although the concentration of cichoric acid did not change significantly during the course of the study, stage 1 (advanced vegetative) had the highest concentration of total polysaccharides and exhibited the most potent induction activity on immune-modulating cytokines such as interferon-gamma and tumor necrosis factor-alpha. These findings suggest that the use of gene expression may be an effective tool not only to standardize botanical extracts but also to optimize harvest time.