Recycled or Bio-Based Solvents for the Synthesis of ZnO Nanoparticles: Characterization and Validation in Organic Solar Cells.

Among solution-processable metal oxides, zinc oxide (ZnO) nanoparticle inks are widely used in inverted organic solar cells for the preparation, at relatively low temperatures (<120 °C), of highly efficient electron-transporting layers. There is, however, a recent interest to develop more sustainable and less impacting methods/strategies for the preparation of ZnO NPs with controlled properties and improved performance. To this end, we report here the synthesis and characterization of ZnO NPs obtained using alternative reaction solvents derived from renewable or recycled sources. In detail, we use (i) recycled methanol (r-MeOH) to close the loop and minimize wastes or (ii) bioethanol (b-EtOH) to prove the effectiveness of a bio-based solvent. The effect of r-MeOH and b-EtOH on the optical, morphological, and electronic properties of the resulting ZnO NPs, both in solution and thin-films, is investigated, discussed, and compared to an analogous reference material. Moreover, to validate the properties of the resulting materials, we have prepared PTB7:PC71BM-based solar cells containing the different ZnO NPs as a cathode interlayer. Power conversion efficiencies comparable to the reference system (≈7%) were obtained, validating the proposed alternative and more sustainable approach.

Eco-Sustainable Silk Fibroin/Pomegranate Peel Extract Film as an Innovative Green Material for Skin Repair.

Skin disorders are widespread around the world, affecting people of all ages, and oxidative stress represents one of the main causes of alteration in the normal physiological parameters of skin cells. In this work, we combined a natural protein, fibroin, with antioxidant compounds extracted in water from pomegranate waste. We demonstrate the effective and facile fabrication of bioactive and eco-sustainable films of potential interest for skin repair. The blended films are visually transparent (around 90%); flexible; stable in physiological conditions and in the presence of trypsin for 12 days; able to release the bioactive compounds in a controlled manner; based on Fickian diffusion; and biocompatible towards the main skin cells, keratinocytes and fibroblasts. Furthermore, reactive oxygen species (ROS) production tests demonstrated the high capacity of our films to reduce the oxidative stress induced in cells, which is responsible for various skin diseases.

Core-shell graphene oxide-polymer hollow fibers as water filters with enhanced performance and selectivity.

Commercial hollow fiber filters for micro- and ultrafiltration are based on size exclusion and do not allow the removal of small molecules such as antibiotics. Here, we demonstrate that a graphene oxide (GO) layer can be firmly immobilized either inside or outside polyethersulfone-polyvinylpyrrolidone hollow fiber (Versatile PES®, hereafter PES) modules and that the resulting core-shell fibers inherits the microfiltration ability of the pristine PES fibers and the adsorption selectivity of GO. GO nanosheets were deposited on the fiber surface by filtration of a GO suspension through a PES cartridge (cut-off 0.1-0.2 µm), then fixed by thermal annealing at 80 °C, rendering the GO coating stably fixed and unsoluble. The filtration cut-off, retention selectivity and efficiency of the resulting inner and outer modified hollow fibers (HF-GO) were tested by performing filtration on water and bovine plasma spiked with bovine serum albumin (BSA, 66 kDa, ≈15 nm size), monodisperse polystyrene nanoparticles (52 nm and 303 nm sizes), with two quinolonic antibiotics (ciprofloxacin and ofloxacin) and rhodamine B (RhB). These tests showed that the microfiltration capability of PES was retained by HF-GO, and in addition the GO coating can capture the molecular contaminants while letting through BSA and smaller polystyrene nanoparticles. Combined XRD, molecular modelling and adsorption experiments show that the separation mechanism does not rely only on physical size exclusion, but involves intercalation of solute molecules between the GO layers.

Polydopamine Nanoparticle-Coated Polysulfone Porous Granules as Adsorbents for Water Remediation.

Water purification technologies possibly based on eco-sustainable, low cost, and multifunctional materials are being intensively pursued to resolve the current water scarcity and pollution. In this scenario, polysulfone hollow porous granules (PS-HPGs) prepared from scraps of the industrial production of polysulfone hollow fiber membranes were recently introduced as adsorbents and filtration materials for water and air treatment. Here, we report the functionalization of PS-HPGs with polydopamine (PD) nanoparticles for the preparation of a new versatile and efficient adsorbent material, namely, PSPD-HPGs. The in situ growth of PD under mild alkaline oxidative polymerization allowed us to stably graft PD on polysulfone granules. Enhanced removal efficiency of ofloxacin, an antibiotic drug, with an improvement up to 70% with respect to the pristine PS-HPGs, and removal of Zn(II) and Ni(II) were also observed after PD modification. Remarkably, removal of Cu(II) ions with an efficiency up to 80% was observed for PSPD-HPGs, whereas no adsorption was found for the PD-free precursor. Collectively, these data show that modification with a biocompatible polymer such as PD provides a simple and valuable tool to enlarge the field of application of polysulfone hollow granules for water remediation from both organic and metal cation contaminants.

Silver route to cuprate analogs.

The parent compound of high-[Formula: see text] superconducting cuprates is a unique Mott insulator consisting of layers of spin-[Formula: see text] ions forming a square lattice and with a record high in-plane antiferromagnetic coupling. Compounds with similar characteristics have long been searched for without success. Here, we use a combination of experimental and theoretical tools to show that commercial [Formula: see text] is an excellent cuprate analog with remarkably similar electronic parameters to [Formula: see text] but larger buckling of planes. Two-magnon Raman scattering and inelastic neutron scattering reveal a superexchange constant reaching 70% of that of a typical cuprate. We argue that structures that reduce or eliminate the buckling of the [Formula: see text] planes could have an antiferromagnetic coupling that matches or surpasses the cuprates.

AC parallel local oxidation of silicon.

Here, we present a suitable advancement of parallel local oxidation nanolithography, demonstrating its feasibility in alternate current mode (AC-PLON). For demonstration, we fabricated model structures consisting of an array of parallel nanostripes of electrochemical SiO x with a controlled roughness. Besides, we proved the repeatability of AC-PLON and its integrability with conventional parallel local oxidation nanolithography.

Highly Ordered Organic Ferroelectric DIPAB-Patterned Thin Films.

Ferroelectric molecular compounds present great advantages for application in electronics because they combine high polarization values, comparable to those of inorganic materials, with the flexibility and low-cost properties of organic ones. However, some limitations to their applicability are related to the high crystallinity required to deploy ferroelectricity. In this article, highly ordered ferroelectric patterned thin films of diisopropylammonium bromide have been successfully fabricated by a lithographically controlled wetting technique. Confinement favors the self-organization of ferroelectric crystals, avoiding the formation of polymorphs and promoting the long-range orientation of crystallographic axes. Patterned structures present high stability, and the polarization can be switched to be arranged in stable domain pattern for application in devices.

Long-Lived Photoinduced Polarons in Organohalide Perovskites.

The long diffusion length of charge carriers in the CH3NH3PbI3 perovskite is one of the most relevant properties for explaining the high photovoltaic efficiency of perovskite solar cells. As a possible mechanism for the large diffusion length of electrons and holes, several authors suggested a reduced coulomb attraction of the carriers due to the formation of polarons. Here we performed continuous wave far-infrared photoinduced absorption (PIA) experiments on CH3NH3PbI3; spectral changes are associated with local deformation of the lattice around the photogenerated long-lived charges, a typical signature of photoinduced polarons. Ab initio calculations show confinement of charge carriers at the interface between structural domains characterized by a different tilting of the PbI6 octahedra. The differential IR spectrum between unperturbed and perturbed simulated structures shows a close pattern to the experimental PIA. Positive and negative charges are confined in different varieties of the perovskites coherent with the low recombination and long diffusion length of photogenerated carriers.

Vibrational Response of Methylammonium Lead Iodide: From Cation Dynamics to Phonon-Phonon Interactions.

The dynamic evolution of the vibrational interactions in the prototypical CH3 NH3 PbI3 was studied through a comprehensive experimental and theoretical investigation with a focus on the interactions between the organic cations and the inorganic cage. To date, no clear picture has emerged on the critical and fundamental interactions between the two perovskite components, despite the relevance of phonons to the electronic properties of several classes of perovskites. For the first time, we have monitored the IR and nonresonant Raman response in the broad frequency range 30-3400 cm-1 and in the temperature interval 80-360 K. Strong changes in the energies of different vibrational modes with temperature are observed and examined in the framework of phonon-phonon interactions considering a significant anharmonic contribution to the phonon relaxation process. The vibrational relaxation of the bending modes and their reorientation activation energies identify that such mechanisms are governed by medium-to-strong hydrogen bonds in the orthorhombic phase; however, any ferroelectric ordering in the orthorhombic phase is governed mostly by dipole interactions. These changes imply that charge localization mechanisms play a primary role, and our study enriches the fundamental knowledge of phonon interactions and charge transport in CH3 NH3 PbI3 for the further development of optoelectronic applications.

Silk fibroin film from golden-yellow Bombyx mori is a biocomposite that contains lutein and promotes axonal growth of primary neurons.

The use of doped silk fibroin (SF) films and substrates from Bombyx mori cocoons for green nanotechnology and biomedical applications has been recently highlighted. Cocoons from coloured strains of B. mori, such as Golden-Yellow, contain high levels of pigments that could have a huge potential for the fabrication of SF based biomaterials targeted to photonics, optoelectronics and neuroregenerative medicine. However, the features of extracted and regenerated SF from cocoons of B. mori Golden-Yellow strain have never been reported. Here we provide a chemophysical characterization of regenerated silk fibroin (RSF) fibers, solution, and films obtained from cocoons of a Golden-Yellow strain of B. mori, by SEM, (1) H-NMR, HPLC, FT-IR, Raman and UV-Vis spectroscopy. We found that the extracted solution and films from B. mori Golden-Yellow fibroin displayed typical Raman spectroscopic and optical features of carotenoids. HPLC-analyses revealed that lutein was the carotenoid contained in the fiber and RSF biopolymer from yellow cocoons. Notably, primary neurons cultured on yellow SF displayed a threefold higher neurite length than those grown of white SF films. The results we report pave the way to expand the potential use of yellow SF in the field of neuroregenerative medicine and provide green chemistry approaches in biomedicine.

Surface induces different crystal structures in a room temperature switchable spin crossover compound.

We investigated the influence of surfaces in the formation of different crystal structures of a spin crossover compound, namely [Fe(L)2] (LH: (2-(pyrazol-1-yl)-6-(1H-tetrazol-5-yl)pyridine), which is a neutral compound thermally switchable around room temperature. We observed that the surface induces the formation of two different crystal structures, which exhibit opposite spin transitions, i.e. on heating them up to the transition temperature, one polymorph switches from high spin to low spin and the second polymorph switches irreversibly from low spin to high spin. We attributed this inversion to the presence of water molecules H-bonded to the complex tetrazolyl moieties in the crystals. Thin deposits were investigated by means of polarized optical microscopy, atomic force microscopy, X-ray diffraction, X-ray absorption spectroscopy and micro Raman spectroscopy; moreover the analysis of the Raman spectra and the interpretation of spin inversion were supported by DFT calculations.

Structural and electronic properties of organo-halide lead perovskites: a combined IR-spectroscopy and ab initio molecular dynamics investigation.

Organo-halide lead perovskites are revolutionizing the photovoltaic scenario, with efficiencies exceeding 15%. The orientational dynamics disorder of the methylammonium cations (MA) is one of the most peculiar features of these materials. Here, we perform ab initio molecular dynamics simulations and IR spectroscopic measurements on lead halide hybrid perovskites to elucidate the rotational motion of the MA cations in these systems and its effects on the structural and electronic properties of hybrid perovskites. In the investigated time frame, the MA cations are found to rotate within the inorganic framework on a timescale of a few ps. A variation of ±0.1 to 0.2 eV of the electronic properties with the ion dynamics is found, which increases upon increasing the temperature.

Innovative multifunctional silk fibroin and hydrotalcite nanocomposites: a synergic effect of the components.

Novel hybrid functional materials are formed by combining hydrotalcite-like compounds and silk fibroin (SF-HTlc) via an environmental friendly aqueous process. The nanocomposites can be prepared with different weight ratio of the constituting components and preserve the conformational properties of the silk protein and the lamellar structure of hydrotalcites. Optical microscopy, scanning electron microscopy, and atomic force microscopy analyses show a good dispersion degree of the inorganic nanoparticles into the organic silk matrix. A mutual benefit on the stability of both organic and inorganic components was observed in the nanocomposites. SF-HTlc displayed limited dissolution of hydrotalcite in acidic medium, enhanced mechanical properties, and higher protease resistance of silk protein. The transparency, flexibility, and acidic environment resistance of silk fibroin combined to the protective and reinforcing properties of hydrotalcites generate a hybrid material, which is very attractive for applications in recently reported silk based opto-electronic and photonics technologies.

A nanostructured conductive bio-composite of silk fibroin-single walled carbon nanotubes.

Silk fibroin (SF), a protein core fibre from the silkworm Bombyx mori, has huge potential to become a sustainable, biocompatible, and biodegradable material platform that can pave the way towards the replacement of plastic in the fabrication of bio-derived materials for a variety of technological and biomedical applications. SF has remarkable mechanical flexibility, controllable biodegradability, biocompatibility and is capable of drug/doping inclusion, stabilization and release. However, the dielectric properties of SF limit its potential as a direct bioelectronic interface in biomedical devices intended to control the bioelectrical activity of the cell for regenerative purposes. In this work, a novel wet templating method is proposed to generate nanostructured, conductive Silk Fibroin (SF) composite films. We combine the unusual properties of SF, such as its mechanical properties, its convenience and biocompatibility with the electrical conductivity and stiffness of Single Walled Carbon Nanotubes (SWCNTs). The presented SF-SWCNT composite displays a periodic architecture where SWCNTs are regularly and homogeneously distributed in the SF protein matrix. The morphological and chemo-physical properties of the nanocomposite are analysed and defined by SEM, Raman Spectroscopy, ATR-IR, UFM and contact angle analyses. Notably, the SF-SWCNT composite film is conductive, showing additional functionality compared to the dielectric properties of the bare SF film. Finally, SF-SWCNT is biocompatible and enables the growth of primary rat Dorsal Root Ganglion (DRG) neurons. Collectively our results demonstrate that the nanostructured, conductive, robust and biocompatible SF-SWCNT composite can be fabricated using a wet templating method, paving the way towards the fabrication and development of silk-based electronic devices for use in bioelectronic and biomedical applications.

A transparent organic transistor structure for bidirectional stimulation and recording of primary neurons.

Real-time stimulation and recording of neural cell bioelectrical activity could provide an unprecedented insight in understanding the functions of the nervous system, and it is crucial for developing advanced in vitro drug screening approaches. Among organic materials, suitable candidates for cell interfacing can be found that combine long-term biocompatibility and mechanical flexibility. Here, we report on transparent organic cell stimulating and sensing transistors (O-CSTs), which provide bidirectional stimulation and recording of primary neurons. We demonstrate that the device enables depolarization and hyperpolarization of the primary neuron membrane potential. The transparency of the device also allows the optical imaging of the modulation of the neuron bioelectrical activity. The maximal amplitude-to-noise ratio of the extracellular recording achieved by the O-CST device exceeds that of a microelectrode array system on the same neuronal preparation by a factor of 16. Our organic cell stimulating and sensing device paves the way to a new generation of devices for stimulation, manipulation and recording of cell bioelectrical activity in vitro and in vivo.

N-type perylene-based organic semiconductors for functional neural interfacing.

The bioelectrical signalling within neural networks has to be monitored in real-time and localized in space in order to unravel the mechanisms behind pathologies and diseases of the nervous systems. Organic materials have significant potential for bio-functional neural interfacing given that their "soft" nature offers better mechanical compatibility with the nerve tissues than conventional semiconductors, and their flexibility allows realization of the non-planar forms typically required for biomedical implants. The integration of living cells into organic semiconductors is an important step towards the development of bio-organic electronic transducers of cellular activity from neurons. Here, we report on the use and characterization of n-type perylene derivatives as a suitable interface platform for organic neuro-electronic devices. We demonstrate that primary neurons can adhere, grow and differentiate on a suitably engineered perylene-based field-effect transistor platform, while maintaining their firing properties even after a prolonged time of cell-culturing. It is noteworthy that the field-effect transistors preserve their electrical characteristics even after 10 days of incubation in cell culture media. These results validate n-type perylene derivatives as a suitable long-term interface platform for organic neuro-electronic devices, which is particularly relevant in view of the recently reported perylene-based field-effect transistor structure capable of providing bidirectional stimulation and recording of primary neurons.

WITHDRAWN: Silk fibroin films are a bio-active interface for neuroregenerative medicine.

Ahead of print article withdrawn by publisher

Thin deposits and patterning of room-temperature-switchable one-dimensional spin-crossover compounds.

We present a study on thin deposits and patterning of 1-D spin-crossover compounds Fe(II)-(L)(2)H](ClO(4))(3)·MeOH [L = 4'-(4'''-pyridyl)-1,2':6'1''-bis- (pyrazolyl) pyridine] (1) that exhibit a reversible, thermally driven spin transition at room temperature. Micrometric rodlike crystals of 1 on silicon surfaces are achieved by drop casting and solvent annealing. We observed that the crystallinity of thin deposits and spin-transition properties critically depends on the deposition procedure. Furthermore, we proved processability and patterning using unconventional wet lithography that reduces the crystallite formation time by 1 order of magnitude. Thin deposits of 1 were characterized by atomic force microscopy, polarized optical microscopy and X-rays, and the switching properties were characterized by Raman spectroscopy.

Template evaporation method for controlling anatase nanocrystal size in ordered macroporous TiO2.

The importance of pure-phase titanium oxide materials as catalysts, sensors, and photonic band-gap materials has been growing steadily. Recently, more attention has been focused on nanostructured titanium oxide showing controlled and periodic porosity on a nanometric scale. The nanocrystal size control of porous nanostructured titanium oxide in an anatase form is a crucial step for the organic template method. Simple template removal by evaporation in an inert atmosphere is reported in this article and compared with the calcination technique usually reported in the literature. The proposed method allows the formation of a double-porous (macro and meso) anatase phase. We demonstrate that it highly preserves the macropore order into a titanium oxide material and induces narrowly dispersed mesopores by controlling the nano-crystal size that is kept around 6 nm. For the proposed method, polystyrene beads are particularly suitable as templates, being evaporated in the temperature range of anatase existence. The final high surface area makes the materials appealing for applications as photocatalysts or sensors.