Lateral Femoral Cutaneous Nerve Block or Wound Infiltration Combined with Pericapsular Nerve Group (PENG) Block for Postoperative Analgesia following Total Hip Arthroplasty through Posterior Approach: A Randomized Controlled Trial.

Background: Pericapsular nerve group (PENG) block, although effective for pain management following total hip arthroplasty (THA), does not cover skin analgesia. In this randomized controlled trial, we compared the effectiveness of PENG block combined with lateral femoral cutaneous nerve (LFCN) block or wound infiltration (WI) on postoperative analgesia and functional outcomes. Methods: Fifty patients undergoing posterior-approached THA under spinal anesthesia were randomly allocated to receive LFCN block with 10 mL of 0.5% ropivacaine or WI with 20 mL of 0.5% ropivacaine. In both groups, PENG block was performed by injecting 20 mL of 0.5% ropivacaine. Primary outcomes were static and dynamic pain scores (0-10 numeric rating scale) measured in the first 24 h after surgery. Secondary outcomes included postoperative opioid consumption, functional assessment and length of hospital stay. Results: Postoperative static NRS of patients receiving LFCN was higher than that of patients receiving WI at 6 h but lower at 24 h, with a median (IQR) of 3 (2-4) vs. 2 (1-2) (p < 0.001) and 2 (2-3) vs. 3 (3-4) (p = 0.02), respectively. Static pain scores at 12 h did not show significant differences, with an NRS of 3 (2-4) for WI vs. 3 (3-4) for LFCN (p = 0.94). Dynamic pain and range of movement followed a similar trend. No significant differences were detected in other outcomes. Conclusions: LFCN block was not inferior to WI for postoperative analgesia and functional recovery in association with PENG block during the first postoperative day, although it had worse short-term pain scores. Based on these results, it is reasonable to consider LFCN block as a valid alternative to WI or even a complementary technique added to WI to enhance skin analgesia during the first 24 h after THA. Future studies are expected to confirm this hypothesis and find the best combination between PENG block and other techniques to enhance analgesia after THA.

Deep Learning-based Segmentation of CT Scans Predicts Disease Progression and Mortality in IPF.

RATIONALE: Despite evidence demonstrating a prognostic role for CT scans in IPF, image-based biomarkers are not routinely used in clinical practice or trials. OBJECTIVES: Develop automated imaging biomarkers using deep learning based segmentation of CT scans. METHODS: We developed segmentation processes for four anatomical biomarkers which were applied to a unique cohort of treatment-naive IPF patients enrolled in the PROFILE study and tested against a further UK cohort. The relationship between CT biomarkers, lung function, disease progression and mortality were assessed. MEASUREMENTS AND MAIN RESULTS: Data was analysed from 446 PROFILE patients. Median follow-up was 39.1 months (IQR 18.1-66.4) with cumulative incidence of death of 277 over 5 years (62.1%). Segmentation was successful on 97.8% of all scans, across multiple imaging vendors at slice thicknesses 0.5-5mm. Of 4 segmentations, lung volume showed strongest correlation with FVC (r=0.82, p<0.001). Lung, vascular and fibrosis volumes were consistently associated across cohorts with differential five-year survival, which persisted after adjustment for baseline GAP score. Lower lung volume (HR 0.98, CI 0.96-0.99, p=0.001), increased vascular volume (HR 1.30, CI 1.12-1.51, p=0.001) and increased fibrosis volume (HR 1.17, CI 1.12-1.22, p=<0.001) were associated with reduced two-year progression-free survival in the pooled PROFILE cohort. Longitudinally, decreasing lung volume (HR 3.41; 95% CI 1.36-8.54; p=0.009) and increasing fibrosis volume (HR 2.23; 95% CI 1.22-4.08; p=0.009) were associated with differential survival. CONCLUSIONS: Automated models can rapidly segment IPF CT scans, providing prognostic near and long-term information, which could be used in routine clinical practice or as key trial endpoints. This article is open access and distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/).

Interventional treatments for low back pain due to sacroiliac joint dysfunction: a systematic review of the literature.

PURPOSE: This systematic review aimed to report the current evidence in the literature about the efficacy of interventional treatments in the management of low back pain (LBP) due to sacroiliac joint dysfunction. METHODS: A systematic review was performed using the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. Medline, EMBASE, Scopus, CINAHL, Cochrane Library, and CENTRAL bibliographic databases were searched. The search was performed from October to December 2021, and articles from the inception of the database to December 2021 were searched. RESULTS: Fourteen studies were included for qualitative synthesis. Five studies used the traditional radiofrequency approach (tRF), five studies used cooled radiofrequency approach (cRF), one study used botulinum toxin (BT), two studies used steroid injection, triamcinolone (TA) and local anesthetics injections, and one study used pulsed radiofrequency (PRF) denervation. Two studies used sham as a comparator. CONCLUSIONS: Cooled radiofrequency seems to be the most effective treatment in improving pain and functionality, while intra-articular injections are helpful only as diagnostic tools. However, due to the lack of high-quality studies, it was not possible to draw significant conclusions.

Stress-strain and fatigue life numerical evaluation of two different dental implants considering isotropic and anisotropic human jaw.

Dental prostheses are currently a valid solution for replacing potential missing tooth or edentulism clinical condition. Nevertheless, the oral cavity is a dynamic and complex system: occlusal loads, external agents, or other unpleasant events can impact on implants functionality and stability causing a future revision surgery. One of the failure origins is certainly the dynamic loading originated from daily oral activities like eating, chewing, and so on. The aim of this paper was to evaluate, by a numerical analysis based on Finite Elements Method (FEM), and to discuss in a comparative way, firstly, the stress-strain of two different adopted dental implants and, subsequently, their fatigue life according to common standard of calculations. For this investigation, the jawbone was modeled accounting for either isotropic or anisotropic behavior. It was composed of cortical and cancellous regions, considering it completely osseointegrated with the implants. The impact of implants' fixture design, loading conditions, and their effect on the mandible bone was finally investigated, on the basis of the achieved numerical results. Lastly, the life cycle of the investigated implants was estimated according to the well-established theories of Goodman, Soderberg, and Gerber by exploiting the outcomes obtained by the numerical simulations, providing interesting conclusions useful in the dental practice.

Natural history of chronic thromboembolic pulmonary disease with no or mild pulmonary hypertension.

BACKGROUND: We describe baseline characteristics, disease progression and mortality in chronic thromboembolic pulmonary disease patients as a function of mean pulmonary artery pressure (mPAP) according to new and previous definitions of pulmonary hypertension. METHODS: All patients diagnosed with chronic thromboembolic pulmonary disease between January, 2015 and December, 2019 were dichotomized according to initial mPAP: ≤ 20 mmHg ('normal') vs 21-24 mmHg ('mildly-elevated'). Baseline features were compared between the groups, and pairwise analysis performed to determine changes in clinical endpoints at 1-year, excluding those who underwent pulmonary endarterectomy or did not attend follow-up. Mortality was assessed for the whole cohort over the entire study period. RESULTS: One hundred thirteen patients were included; 57 had mPAP ≤ 20 mmHg and 56 had mPAP 21-24 mmHg. Normal mPAP patients had lower pulmonary vascular resistance (1.6 vs 2.5WU, p < 0.01) and right ventricular end-diastolic pressure (5.9 vs 7.8 mmHg, p < 0.01) at presentation. At 3 years, no major deterioration was seen in either group. No patients were treated with pulmonary artery vasodilators. Eight had undergone pulmonary endarterectomy. Over 37 months median follow-up, mortality was 7.0% in the normal mPAP group and 8.9% in the mildly-elevated mPAP group. Cause of death was malignancy in 62.5% of cases. CONCLUSIONS: Chronic thromboembolic pulmonary disease patients with mild pulmonary hypertension have statistically higher right ventricular end-diastolic pressure and pulmonary vascular resistance than those with mPAP ≤ 20 mmHg. Baseline characteristics were otherwise similar. Neither group displayed disease progression on non-invasive tests up to 3 years. Mortality over 37 months follow-up is 8%, and mainly attributable to malignancy. Further prospective study is required to validate these findings.

Mandibular Reconstruction after Resection of Ameloblastoma by Custom-Made CAD/CAM Mandibular Titanium Prosthesis: Two Case Reports, Finite Element Analysis and Discussion of the Technique.

Virtual surgical planning for CAD/CAM mandibular reconstruction by titanium prosthesis was recently reported for resected cases. Even if some advantages are evident, difficulties that may arise for TMJ function after reconstruction originate from prosthesis contamination through oral mucosa dehiscence. In these two cases reported of mandibular reconstruction after resection of ameloblastoma by custom-made CAD/CAM titanium prosthesis, the procedures were aimed to preserve the TMJ glenoid cavity and articular disc avoiding functional problems for hemi-mandibular resections that included the condyle (as in case #1) or with condylar preservation (as in case #2) and avoiding intraoral incisions in both cases. The entire surgical planning and prosthetic fabrication were explained with specifications and the sequence of the surgical procedure. Finite elements analysis (FEA) was performed to check the force distribution and efficacy of the prosthetic device (case 1 with hemi-mandibular resection and rehabilitation). Although successful in these two cases, surgical reconstruction of the mandibular defect after resection by a CAD-CAM custom-made prosthesis still shows some drawbacks and failure risks. Several advantages of this technique and the surgical success in these two cases were presented, but limitations and side effects must be considered when cases are selected.

Ultrasound predictors of difficult spinal anesthesia: a prospective single-blind observational study.

BACKGROUND: Ultrasound showed to improve the precision and efficacy of spinal anesthesia (SA) through the identification of specific structures surrounding the intrathecal space, such as the anterior and posterior complex of dura mater (DM). The aim of this study was to verify the efficacy of ultrasonography in predicting difficult SA trough the analysis of different ultrasound patterns. METHODS: This prospective single-blind observational study involved 100 patients undergoing orthopedic or urological surgery. A first operator chose by landmarks the intervertebral space where he wanted to perform SA. Then a second operator recorded the visibility of DM complexes at ultrasound. Subsequently, the first operator, blinded to the ultrasound evaluation, performed SA, defined as "difficult" in case of failure, change of intervertebral space, operator exchange, duration >400 seconds or more than 10 needle passes. RESULTS: The ultrasound visualization of only posterior complex or the failure in visualization of both complexes showed a positive predictive value of 76% and 100%, respectively, towards difficult SA vs. 6% when both complexes were visible; P<0.001. A negative correlation was found between the number of visible complexes and both patients' age and BMI. Landmark-guided evaluation underestimated the intervertebral level in 30% of cases. CONCLUSIONS: Ultrasound showed a high accuracy in detecting difficult spinal anesthesia and its use should be recommended in the daily clinical practice in order to increase success rate and minimize patient discomfort. The absence of both DM complexes at ultrasound should lead the anesthetist to evaluate other intervertebral levels or consider alternative techniques.

Interventional Minimally Invasive Treatments for Chronic Low Back Pain Caused by Lumbar Facet Joint Syndrome: A Systematic Review.

STUDY DESIGN: Systematic review. OBJECTIVE: To investigate the efficacy of nonsurgical interventional treatments for chronic low back pain (LBP) caused by facet joint syndrome (FJS). METHODS: A systematic review of the literature was conducted to identify studies that compared interventional treatments for LBP due to FJS among them, with usual care or sham procedures. Studies were evaluated for pain, physical function, disability, quality of life and employment status. The RoB-2 and MINORS tools were utilized to assess the risk of bias in included studies. RESULTS: Eighteen studies published between January 2000 and December 2021 were included (1496 patients, mean age: 54.31 years old). Intraarticular (IA) facet joint (FJ) injection of hyaluronic acid (HA) did not show significant difference compared to IA corticosteroids (CCS) in terms of pain and satisfaction. FJ denervation using radiofrequency (RF) displayed slightly superior or similar outcomes compared to IA CCS, physical therapy, or sham procedure. IA CCS showed better outcomes when combined with oral diclofenac compared to IA CCS or oral diclofenac alone but was not superior to IA local anesthetic and Sarapin. IA platelet-rich plasma (PRP) led to an improvement of pain, disability and satisfaction in the long term compared to IA CCS. CONCLUSION: FJS is a common cause of LBP that can be managed with several different strategies, including nonsurgical minimally invasive approaches such as IA HA, CCS, PRP and FJ denervation. However, available evidence showed mixed results, with overall little short-term or no benefits on pain, disability, and other investigated outcomes.

Acute lung injury after balloon pulmonary angioplasty results in a similar haemodynamic response and possible clinical advantage at follow-up.

Acute lung injury (ALI) is a common but poorly defined and understood complication of balloon pulmonary angioplasty (BPA) for chronic thromboembolic pulmonary hypertension (CTEPH). Little data are available on the medium term clinical outcomes of BPA complicated by ALI. We analyzed per-procedure data from 282 procedures in 109 patients and per-patient data from 85 patients. Serial right heart catheterization at baseline, after each BPA and at 3-month follow-up measured pulmonary vascular resistance (PVR), mean pulmonary artery pressure (mPAP), and cardiac output (CO). ALI (ALI+) was identified by chest radiography alone (ALIr+) or in association with hypoxia clinically (ALIcr+). Procedural predictors of ALI and patient outcomes at 3-months were compared no ALI (ALI-). ALI+ occurred in 17/282 (6.0%) procedures (ALIcr+: 2.5%, ALIr+: 3.5%). Prevailing haemodynamics (PVR: p < 0.01; mPAP: p < 0.05) at a procedural and patient level, as well as number of BPA sessions (p < 0.01), total number of vessels (p < 0.05), and occlusions (p < 0.05) treated at a patient level predicted ALI+. Those with ALI had greater percentage improvement in ΔCAMPHOR symptoms score (ALI+: -63.5 ± 35.7% (p < 0.05); ALIcr+: -84.4 ± 14.5% (p < 0.01); ALI-: -27.2 ± 74.2%) and ΔNT-proBNP (ALIcr+: -78.4 ± 11.9% (p < 0.01); ALI-: -42.9 ± 36.0%) at follow-up. There was no net significant difference in haemodynamic changes in ALI+ versus ALI- at follow-up. ALI is predicted by haemodynamic severity, number of vessels treated, number of BPA sessions, and treating occlusive disease. ALI in this cohort was associated with a clinical advantage at follow-up.

Tribo-corrosive behavior of additive manufactured parts for orthopaedic applications.

Background: Additive manufacturing (AM) being an integral component of the production offers a wide variety of applications in the production of different components. The medical industry after the introduction of Additive Manufacturing has resulted in several advancements. The production of intricate patient-specific implants is one of such advancements which greatly assist a surgeon during a surgery. Orthopedic implants apart from possessing good mechanical strength are also expected to exhibit good tribological and corrosion behavior. As a result, the development of various orthopaedic implants and tools has become simple with the use of additive manufacturing. Objectives and Rationale: In the current paper an effort has been made to discuss actual scientific knowledge on the tribo-corrosive behavior of additive manufactured parts for orthopedic applications. Different studies dealing with the mechanisms of lubrication and friction in synovial joints have also been considered. A special focus has also been laid down to study the corrosive effect of implants on the human body. A section dedicated to texturing of orthopedic implants has also been provided. The paper further elaborates the different research challenges and issues related to the use of additive manufacturing for the production of optimized orthopedic implants. Conclusion: The study revealed that additive manufacturing has greatly aided in the manufacture of different orthopaedic implants with enhanced properties. However, a detailed study of the effect of processes like friction, wear, lubrication and corrosion in these implants needs to be done. The performance of these implants in the presence of various synovial fluids also needs to be addressed. However, the lack of more biocompatible materials, scalability and cost issues hinder the widespread use of AM in the different orthopaedic applications.

Roadmap for 2D materials in biotribological/biomedical applications - A review.

The human body involves a large number of systems subjected to contact stresses and thus experiencing wear and degradation. The limited efficacy of existing solutions constantly puts a significant financial burden on the healthcare system, more importantly, patients are suffering due to the complications following a partial or total system failure. More effective strategies are highly dependent on the availability of advanced functional materials demonstrating excellent tribological response and good biocompatibility. In this article, we review the recent progress in implementing two-dimensional (2D) materials into bio-applications involving tribological contacts. We further summarize the current challenges for future progress in the field.

Gender and AB0 Blood Type Differences in a Unicentric Group of University Professors in Southern Italy Who Received the Vaxzevria COVID-19 Vaccine: A Cross-Sectional Survey of Vaccine Side Effects, Attitudes, and Hesitation.

Vaccination has been a key protective behavior for COVID-19. This study investigated the clinical status of university professors administered the Vaxzevria COVID-19 vaccine, to monitor for any adverse reaction, and to understand attitude and hesitancy to vaccination. Data were collected through an online survey. The study received approval from the relevant ethics committee "Comitato Etico Campania Sud". Multivariate logistic regressions were used to calculate significant predictors of the outcomes of interest. A gender and AB0 blood type difference in adverse vaccine reactions was found. The multivariate logistic regression model showed that female gender, city residence, blood type A+ and B-, and chronic underlying medical conditions or comorbidities were more strongly implicated in the occurrence of adverse reactions, whereas blood type 0 Rh+ or blood type A Rh- were protective factors of adverse reactions to the Vaxzevria vaccine. Both genders did not show serious adverse reactions to the Vaxzevria vaccine. Based on our results, we are able to support the hypothesis that AB0 blood type and gender difference appear as predictors of Vaxzevria COVID-19 vaccine reactogenicity. Furthermore, in the study population, the degree of concern and hesitation to undergo vaccination was minimal.

A Musculoskeletal Multibody Algorithm Based on a Novel Rheonomic Constraints Definition Applied to the Lower Limb.

In this paper, a multibody model was developed in the framework of biotribology of lower limb artificial joints. The presented algorithm performs the inverse dynamics of musculoskeletal systems with the aim to achieve a tool for the calculation of the joint reaction forces. The revolute joint, the cam joint, the spherical joint and the free joint were considered in the analyzed lower limb system by introducing a novel analytical formulation of the rheonomic constraint equations based on the quaternions theory. Within the kinematical analysis, the curved muscle paths were modeled by simulating their geodesic wrapping over bony surfaces while the muscle actuations were formulated through the Hill muscle model. The developed theoretical model was developed in matlab environment allowing to follow the classical musculoskeletal analysis pipeline: kinematical analysis, inverse dynamics, and static optimization, applied to the lower limb during the gait kinematics. The validation of the results was obtained by comparing the calculated hip joint reactions with the ones obtained in vivo by Bergmann and calculated by Opensim software, showing a satisfactory agreement. The proposed model and algorithm represent a fully open and controllable synovial joint tribological configuration generator tool, useful to be coupled with numerical lubrication/contact models in the framework of the in silico artificial joints tribological optimization.

Prognostic significance of CTNNB1 mutation in early stage endometrial carcinoma: a systematic review and meta-analysis.

BACKGROUND: In the last years, mutations in the exon 3 of CTNNB1 have emerged as a possible prognostic factor for recurrence in early stage endometrioid endometrial carcinoma, especially in cases with no specific molecular profile (NSMP). OBJECTIVE: To define the prognostic value of CTNNB1 mutations in early stage endometrioid endometrial carcinoma, through a systematic review and meta-analysis. METHODS: Electronic databases were searched from their inception to November 2020 for all studies assessing the prognostic value of CTNNB1 mutation in early stage (FIGO I-II) endometrioid endometrial carcinoma. Odds ratio (OR) for tumor recurrence and hazard ratio (HR) for disease-free survival (DFS) were calculated with a significant p value < 0.05. RESULTS: Seven studies with 1031 patients were included. Four studies were suitable for meta-analysis of OR and showed significant association between CTNNB1 mutation and the absolute number of recurrence (OR = 3.000; p = 0.019); the association became stronger after excluding patients with known molecular status other than NSMP (HR = 5.953; p = 0.012). Three studies were suitable for meta-analysis of HR and showed no significant association between CTNNB1 mutation and decreased DFS (HR = 1.847; p = 0.303); the association became significant after excluding patients with known molecular status other than NSMP (HR = 2.831; p = 0.026). CONCLUSION: CTNNB1 mutation is significantly associated with recurrence in early stage endometrioid endometrial carcinomas, especially in the NSMP, appearing potentially useful in directing adjuvant treatment.

Vascular Thrombosis in Severe COVID-19 Requiring Extracorporeal Membrane Oxygenation: A Multicenter Study.

OBJECTIVES: Coronavirus disease 2019 has been reported to be a prothrombotic condition; however, multicenter data comparing this with other viral pneumonias in those requiring extracorporeal membrane oxygenation are lacking. We conducted a multicenter study using whole-body CT to examine the prevalence, severity, and nature of vascular complications in coronavirus disease 2019 in comparison with patients with other viral pneumonias. DESIGN: We analyzed whole-body CT scans for the presence of vascular thrombosis (defined as pulmonary artery thrombus, venous thrombus, systemic arterial thrombus, or end-organ infarct). The severity, distribution, and morphology of pulmonary artery thrombus were characterized. Competing risk cumulative incidence analysis was used to compare survival with discharge. SETTING: Three centers of the English national extracorporeal membrane oxygenation service. PATIENTS: Consecutive patients admitted with either coronavirus disease 2019 or noncoronavirus disease 2019 viral pneumonia admitted from January 2019. INTERVENTIONS: None. MEASUREMENTS AND MAIN RESULTS: One-hundred thirty-six patients (45.2 ± 10.6 yr old, 39/146 [27%] female) requiring extracorporeal membrane oxygenation support underwent whole-body CT scans at admission. Of these, 86 had coronavirus disease 2019 pneumonia, and 50 had noncoronavirus disease 2019 viral pneumonia. Vascular thrombosis was seen more often in patients with coronavirus disease 2019 (odds ratio, 12.9 [95% CI 4.5-36.8]). In those with coronavirus disease 2019, 57 (73%) demonstrated pulmonary artery thrombus or pulmonary perfusion defects. Eighty-two percent of thrombus exhibited emboli-like morphology. The location of pulmonary artery thrombus and parenchymal perfusion defects was only concordant in 30% of cases. The risk of mortality was higher in those with coronavirus disease 2019 compared with noncoronavirus disease 2019 pneumonia (χ2 = 3.94; p = 0.047). Mortality was no different in coronavirus disease 2019 patients with or without vascular thrombosis (χ2 = 0.44; p = 0.51). CONCLUSIONS: In patients who received extracorporeal membrane oxygenation, coronavirus disease 2019 is associated with a higher prevalence of vascular thrombosis compared with noncoronavirus disease viral pneumonias. The pattern of pulmonary vascular changes suggests concurrent embolic disease and small vessel disease. Despite this, vascular thrombosis was not linked to poorer short-term prognosis in those with coronavirus disease 2019.

Rising COVID-19 related acute pulmonary emboli but falling national chronic thromboembolic pulmonary hypertension referrals from a large national dataset.

The average rate of new #CTEPH referrals has dropped by 32% in the UK during the pandemic, despite the high incidence of #COVID19 related pulmonary emboli. There have been no recorded new cases of CTEPH caused by COVID-19. A prospective study is underway. https://bit.ly/37msP2G.