State-of-the-Art Polyurea Coatings: Synthesis Aspects, Structure-Properties Relationship, and Nanocomposites for Ballistic Protection Applications.

This review presents polyurea (PU) synthesis, the structure-properties relationship, and characterization aspects for ballistic protection applications. The synthesis of polyurea entails step-growth polymerization through the reaction of an isocyanate monomer/prepolymer and a polyamine, each component possessing a functionality of at least two. A wide range of excellent properties such as durability and high resistance against atmospheric, chemical, and biological factors has made this polymer an outstanding option for ballistic applications. Polyureas are an extraordinary case because they contain both rigid segments, which are due to the diisocyanates used and the hydrogen points formed, and a flexible zone, which is due to the chemical structure of the polyamines. These characteristics motivate their application in ballistic protection systems. Polyurea-based coatings have also demonstrated their abilities as candidates for impulsive loading applications, affording a better response of the nanocomposite-coated metal sheet at the action of a shock wave or at the impact of a projectile, by suffering lower deformations than neat metallic plates.

Dual-Responsive Hydrogels for Mercury Ion Detection and Removal from Wastewater.

This study describes the development of a fast and cost-effective method for the detection and removal of Hg2+ ions from aqueous media, consisting of hydrogels incorporating chelating agents and a rhodamine derivative (to afford a qualitative evaluation of the heavy metal entrapment inside the 3D polymeric matrix). These hydrogels, designed for the simultaneous detection and entrapment of mercury, were obtained through the photopolymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSA) and N-vinyl-2-pyrrolidone (NVP), utilizing N,N'-methylenebisacrylamide (MBA) as crosslinker, in the presence of polyvinyl alcohol (PVA), a rhodamine B derivative, and one of the following chelating agents: phytic acid, 1,3-diamino-2-hydroxypropane-tetraacetic acid, triethylenetetramine-hexaacetic acid, or ethylenediaminetetraacetic acid disodium salt. The rhodamine derivative had a dual purpose in this study: firstly, it was incorporated into the hydrogel to allow the qualitative evaluation of mercury entrapment through its fluorogenic switch-off abilities when sensing Hg2+ ions; secondly, it was used to quantitatively evaluate the level of residual mercury from the decontaminated aqueous solutions, via the UV-Vis technique. The ICP-MS analysis of the hydrogels also confirmed the successful entrapment of mercury inside the hydrogels and a good correlation with the UV-Vis method.

Silicone Oil Utilized in Pars Plana Vitrectomy for Patients with Advanced Proliferative Diabetic Retinopathy: Physico-Chemical and Optical Properties.

Objective: Silicone oils have the role in maintaining the attachment of the retina in conditions where the risk of retinal re-detachment is high. However, silicone oils have the tendency to emulsify with subsequent complications. In this work, analyses have been performed to understand changes that occurred to the optical, and physical characteristics of the oil after removal from the vitreous cavity of patients underwent pars plana vitrectomy (PPV) for fibrovascular membranes/tractional retinal detachment (FVM/TRD). Methods: Four samples of silicone oil were allocated from patients who underwent PPV for FVM/TRD. The Fourier-transform infrared (FTIR) spectroscopy, micro-viscometry, and ultraviolet-visible spectrometer analyses were utilized to determine the changes in its chemical bondings, viscosity, absorbance, transmittance, buoyance, and specific gravity. Results: The mean age of the patients was 49.0 years. The mean duration of silicone oil implantation was 18.9 months. FTIR analysis showed significant breaking in the chemical bonding that was related to the lens status during the primary PPV, the presence of significant retinal hemorrhages, the duration of silicone oil implantation, and the degree of silicone oil filling. Similarly, viscosity and contact angle analyses revealed a reduction in the viscosity with similar factors to the FTIR analysis. Moreover, absorbance and transmittance were largely affected by the aggressiveness of FVM/TRD. Conclusion: This study revealed that certain factors such as the age of the patient, duration of silicone oil implantation, lens status, and the presence of retinal hemorrhages, the degree of silicone oil filling and aggressiveness of FVM/TRD may contribute to the emulsification process.

Peelable Alginate Films Reinforced by Carbon Nanofibers Decorated with Antimicrobial Nanoparticles for Immediate Biological Decontamination of Surfaces.

This study presents the synthesis and characterization of alginate-based nanocomposite peelable films, reinforced by carbon nanofibers (CNFs) decorated with nanoparticles that possess remarkable antimicrobial properties. These materials are suitable for immediate decontamination applications, being designed as fluid formulations that can be applied on contaminated surfaces, and subsequently, they can rapidly form a peelable film via divalent ion crosslinking and can be easily peeled and disposed of. Silver, copper, and zinc oxide nanoparticles (NPs) were synthesized using superficial oxidized carbon nanofibers (CNF-ox) as support. To obtain the decontaminating formulations, sodium alginate (ALG) was further incorporated into the colloidal solutions containing the antimicrobial nanoparticles. The properties of the initial CNF-ox-NP-ALG solutions and the resulting peelable nanocomposite hydrogels (obtained by crosslinking with zinc acetate) were assessed by rheological measurements, and mechanical investigations, respectively. The evaluation of Minimal Inhibitory Concentration (MIC) and Minimal Bactericidal Concentration (MBC) for the synthesized nanoparticles (silver, copper, and zinc oxide) was performed. The best values for MIC and MBC were obtained for CNF-ox decorated with AgNPs for both types of bacterial strains: Gram-negative (MIC and MBC values (mg/L): E. coli-3 and 108; P. aeruginosa-3 and 54) and Gram-positive (MIC and MBC values (mg/L): S. aureus-13 and 27). The film-forming decontaminating formulations were also subjected to a microbiology assay consisting of the time-kill test, MIC and MBC estimations, and evaluation of the efficacity of peelable coatings in removing the biological agents from the contaminated surfaces. The best decontamination efficiencies against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa varied between 97.40% and 99.95% when employing silver-decorated CNF-ox in the decontaminating formulations. These results reveal an enhanced antimicrobial activity brought about by the synergistic effect of silver and CNF-ox, coupled with an efficient incorporation of the contaminants inside the peelable films.

Synthesis and Mechanical Performances of Polyurethane Bio-Based Adhesives Resulted from the Depolymerization of Lignocellulose Biomass.

The purpose of this study is to valorize biomass waste into products with added value for indoor applications. Thus, broadleaf sawdust was chemically processed by the solvolysis reaction in acid catalysis in the presence of diethylene glycol at 160 °C for 4 h. After filtration and removal of the unreacted biomass, the glycolysis product was used in 6 different polyurethane adhesive formulations for wood bonding. The adhesive films were characterized by FT-IR, TGA, and DMA, while the mechanical performances were investigated by tensile and three-point bending tests. An innovative method for the determination of the working time was proposed. After the displacement of the wood substrates by the tensile test, the bonded area was investigated by SEM analysis. To confirm a correlation between the mechanical performances of the adhesives and their structure/formulation, two-dimensional (2D) simulations were performed based on the tensile tests.

Nanocomposite Hydrogel Films Based on Sequential Interpenetrating Polymeric Networks as Drug Delivery Platforms.

In this study, novel materials have been obtained via a dual covalent and ionic crosslinking strategies, leading to the formation of a fully interpenetrated polymeric network with remarkable mechanical performances as drug delivery platforms for dermal patches. The polymeric network was obtained by the free-radical photopolymerization of N-vinylpyrrolidone using tri(ethylene glycol) divinyl ether as crosslinker in the presence of sodium alginate (1%, weight%). The ionic crosslinking was achieved by the addition of Zn2+, ions which were coordinated by the alginate chains. Bentonite nanoclay was incorporated in hydrogel formulations to capitalize on its mechanical reinforcement and adsorptive capacity. TiO2 and ZnO nanoparticles were also included in two of the samples to evaluate their influence on the morphology, mechanical properties and/or the antimicrobial activity of the hydrogels. The double-crosslinked nanocomposite hydrogels presented a good tensile resistance (1.5 MPa at 70% strain) and compression resistance (12.5 MPa at a strain of 70%). Nafcillin was loaded into nanocomposite hydrogel films with a loading efficiency of up to 30%. The drug release characteristics were evaluated, and the profile was fitted by mathematical models that describe the physical processes taking place during the drug transfer from the polymer to a PBS (phosphate-buffered saline) solution. Depending on the design of the polymeric network and the nanofillers included, it was demonstrated that the nafcillin loaded into the nanocomposite hydrogel films ensured a high to moderate activity against S. aureus and S. pyogenes and no activity against E. coli. Furthermore, it was demonstrated that the presence of zinc ions in these polymeric matrices can be correlated with the inactivation of E. coli.

Nafcillin-Loaded Photocrosslinkable Nanocomposite Hydrogels for Biomedical Applications.

Skin infections are frequently treated via intravenous or oral administration of antibiotics, which can lead to serious adverse effects and may sometimes contribute to the proliferation of resistant bacterial strains. Skin represents a convenient pathway for delivering therapeutic compounds, ensured by the high number of blood vessels and amount of lymphatic fluids in the cutaneous tissues, which are systematically connected to the rest of the body. This study provides a novel, straightforward method to obtain nafcillin-loaded photocrosslinkable nanocomposite hydrogels and demonstrates their performance as drug carriers and antimicrobial efficacy against Gram-positive bacteria. The novel formulations obtained, based on polyvinylpyrrolidone, tri(ethylene glycol) divinyl ether crosslinker, hydrophilic bentonite nanoclay, and/or two types of photoactive (TiO2 and ZnO) nanofillers, were characterized using various analytical methods (transmission electron microscopy (TEM), scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX), mechanical tests (tension, compression, and shear), ultraviolet-visible spectroscopy (UV-Vis), swelling investigations, and via specific microbiological assays ("agar disc diffusion method" and "time-kill test"). The results reveal that the nanocomposite hydrogel possessed high mechanical resistance, good swelling abilities, and good antimicrobial activity, demonstrating a decrease in the bacteria growth between 3log10 and 2log10 after one hour of direct contact with S. aureus.

"Green" PBX Formulations Based on High Explosives (RDX and HMX) and Water-Soluble pH-Sensitive Polymeric Binders.

The increasingly harsher and more complex international and European environmental legislation drives the current development of "greener" energetics materials and munitions. The aerospace and defense industries rely on extensive research in the formulation and scale-up production of polymer-bonded explosives (PBX). In this context, this paper aims to present a versatile method for obtaining "green" PBX formulations based on two high explosives (hexogen (RDX) and octogen (HMX)) and acrylic acid-ethyl acrylate copolymeric binders. This study developed an innovative "eco-friendly" technology for coating the RDX and HMX crystals, allowing straightforward and safer manufacture of PBX, avoiding the use of traditional organic solvents. At the same time, these polymeric binders are soluble in water at a slightly alkaline pH and insoluble at acidic or neutral pH, thus ensuring a safer manipulation of the energetic materials during their entire life cycle and a facile recovery of the explosive in its original shape and morphology in demilitarization. The PBX formulations were characterized via specific analytical tools to evaluate the influence of their composition on the safety and performance characteristics: scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), alkaline pH solubility tests, differential thermal analysis (DTA), impact sensitivity test (BAM Fall Hammer Test), friction sensitivity test (BAM Friction Test), electrostatic sensitivity test (ESD), vacuum stability test, small scale shock reactivity test (SSRT), detonation velocity test. The "green" PBX formulations obtained through a simple and innovative coating method, based on the polymeric binders' adjustable water solubility, demonstrated remarkable energetic performances and a facile recovery of the explosive crystals by the dissolution of the polymeric binder at pH 11 and 30 °C.

Surface Modification Using MAPLE Technique for Improving the Mechanical Performance of Adhesive Joints.

The adhesive bonds that ensure the appropriate mechanical properties for metal joining imply the surface chemical and wetting modification characteristics of the substrates. In this work, matrix-assisted pulsed laser evaporation (MAPLE) was used for the surface modification of Al via the deposition of two chemical compounds, polyvinyl alcohol (PVA) and triethanolamine (TEA), from frozen aqueous solutions. The deposition of the TEA and PVA layers was evidenced by FT-IR, SEM, and AFM analysis. The contact angle measurements evidenced the change in the hydrophilicity of the surface and surface free energies. The performance of the commercial silyl-based polymer adhesive Bison Max Repair Extreme Adhesive® was evaluated by tensile strength measurements. This method led to a change in tensile strength of 54.22% in the case of Al-TEA and 36.34% for Al-PVA compared with the control. This study gives preliminary insights into using MAPLE, for the first time in adhesive applications, as a pretreatment method for Al plates for adhesive bonding reinforcement.

Lignocellulose Biomass Liquefaction: Process and Applications Development as Polyurethane Foams.

One of the main strategies for sustainable human society progress is the development of efficient strategies to limit waste production and maximize renewable resource utilization. In this context, this review highlights the opportunity to transform vegetable biomass residues into valuable commercial products. Biomass conversion entails the depolymerization of lignocellulosic biomass towards biopolyols and the synthesis and characterization of the valuable products obtained by using them. The influence of the reaction parameters in both acid and basic catalysis is highlighted, respectively the influence of microwaves on the liquefaction reaction versus conventional heating. Following the depolymerization reaction, polyols are employed to produce polyurethane foams. As a special characteristic, the addition of flame-retardant properties was emphasized. Another interesting topic is the biodegradability of these products, considering the negative consequences that waste accumulation has on the environment.

Effect of Aromatic Chain Extenders on Polyurea and Polyurethane Coatings Designed for Defense Applications.

The present work describes the synthesis of new versatile polyurea (PU) and polyurethane (PUR) matrices, including different chain extenders, which facilitate the design of distinct, tunable properties, and high-performance derivatives. These polymers can be used for various defense and security applications, such as coatings for ballistic protection, CBRN protection, binders for energetic formulations, etc. Combining aliphatic and aromatic molecules in PU or PUR structures enables the synthesis of polymers with improved and controllable thermo-mechanical properties. Thus, for polyurea synthesis, we utilized two types of polymeric aliphatic diamines and three types of aromatic chain extenders (1,1'-biphenyl-4,4'-diamine, benzene-1,2-diamine, and 1,2-diphenylhydrazine). An analogous method was used to synthesize polyurethane films by employing one polymeric aliphatic polyol and three types of aromatic chain extenders (benzene-1,3-diol, benzene-1,4-diol, and benzene-1,2,3-triol). Subsequently, various analytic techniques (Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), single cantilever dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), frequency-dependent shear modulus survey, tensile tests, water contact angle measurements, and scanning electron microscopy (SEM) with energy-dispersive X-ray analysis (EDX)) have been utilized to characterize the synthesized materials and to evaluate the influence of each chain extender on their final properties.

Synthesis and characterization of polyurethane flexible foams provided from PET derivatives, fly ash, and glass wastes.

The aim of this study involved the synthesis and characterization of polyurethane (PUR) foams obtained from poly(ethylene terephthalate) (PET) depolymerization products and two types of filling agents, namely fly ash and glass waste. The depolymerized PET-based products were obtained by zinc acetate-catalyzed glycolysis process in diethylene glycol (DEG) as a co-reactant. The resulting glycolysis products were contacted with methylene diphenyl diisocyanate, castor oil, and reinforcing agents. The resulting PUR specimens were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), EDX mapping, mechanical tests, and thermal analysis. The analysis confirmed that the best mechanical performances were registered by the specimens with the lowest concentration of filling agent, while the highest thermal resistance was achieved by the PUR foams with the highest concentration of reinforcing agent.

The Influence of Potassium Salts Phase Stabilizers and Binder Matrix on the Properties of Novel Composite Rocket Propellants Based on Ammonium Nitrate.

The environmental impact and availability of ingredients are vital for the new generation of rocket propellants. In this context, several novel composite propellants were prepared based on the "greener" oxidizer phase-stabilized ammonium nitrate (PSAN), a micronized aluminum-magnesium alloy fuel, iron oxide powder burn rate modifier, triethylene glycol dinitrate (TEGDN) energetic plasticizer and a polyurethane (PU) binder. The novelty of this study is brought by the innovative procedure of synthesizing and combining the constituents of these heterogeneous compositions to obtain high-performance "eco-friendly" rocket propellants. The polymorphism shortcomings brought by ammonium nitrate in these energetic formulations have been solved by its co-crystallization with potassium salts (potassium nitrate, potassium chromate, potassium dichromate, potassium sulphate, potassium chlorate and potassium perchlorate). Polyester-polyol blends, resulting from recycled post-consumer polyethylene terephthalate (PET) glycolysis, were utilized for the synthesis of the polyurethane binder, especially designed for this type of application. To adjust the energetic output and tailor the mechanical properties of the propellant, the energetic plasticizer TEGDN was also involved. The performance and safety characteristics of the novel composites were evaluated through various analytical techniques (TGA, DTA, XRD) and specific tests (rate of combustion, heat of combustion, specific volume, chemical stability, sensitivity to thermal, impact and friction stimuli), according to NATO standards, providing promising preliminary results for further ballistics investigations.

Peelable Nanocomposite Coatings: "Eco-Friendly" Tools for the Safe Removal of Radiopharmaceutical Spills or Accidental Contamination of Surfaces in General-Purpose Radioisotope Laboratories.

Radioactive materials are potentially harmful due to the radiation emitted by radionuclides and the risk of radioactive contamination. Despite strict compliance with safety protocols, contamination with radioactive materials is still possible. This paper describes innovative and inexpensive formulations that can be employed as 'eco-friendly' tools for the safe decontamination of radiopharmaceuticals spills or other accidental radioactive contamination of the surfaces arising from general-purpose radioisotope handling facilities (radiopharmaceutical laboratories, hospitals, research laboratories, etc.). These new peelable nanocomposite coatings are obtained from water-based, non-toxic, polymeric blends containing readily biodegradable components, which do not damage the substrate on which they are applied while also displaying efficient binding and removal of the contaminants from the targeted surfaces. The properties of the film-forming decontamination solutions were assessed using rheological measurements and evaporation rate tests, while the resulting strippable coatings were subjected to Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and tensile tests. Radionuclide decontamination tests were performed on various types of surfaces encountered in radioisotope workspaces (concrete, painted metal, ceramic tiles, linoleum, epoxy resin cover). Thus, it was shown that they possess remarkable properties (thermal and mechanical resistance which permits facile removal through peeling) and that their capacity to entrap and remove beta and alpha particle emitters depends on the constituents of the decontaminating formulation, but more importantly, on the type of surface tested. Except for the cement surface (which was particularly porous), at which the decontamination level ranged between approximately 44% and 89%, for all the other investigated surfaces, a decontamination efficiency ranging from 80.6% to 96.5% was achieved.

Epoxy Coatings Containing Modified Graphene for Electromagnetic Shielding.

This study presents the functionalization and characterization of graphene and electromagnetic interference (EMI) attenuation capacity in epoxy-nanocomposites. The modification of graphene involved both small molecules and polymers for compatibilization with epoxy resin components to provide EMI shielding. The TGA and RAMAN analyses confirmed the synthesis of graphene with a different layer thickness of the graphene sheets. Graphene samples with different layer thicknesses (monolayer, few layers, and multilayer) were selected and further employed for epoxy coating formulation. The obtained nanocomposites were characterized in terms of EMI shielding effectiveness, SEM, micro-CT, magnetic properties, and stress-strain resistance. The EMI shielding effectiveness results indicated that the unmodified graphene and hexamethylene diamine (HMDA) modified graphene displayed the best EMI shielding properties at 11 GHz. However, the epoxy nanocomposites based on HMDA modified graphene displayed better flexibility with an identical EMI shielding effectiveness compared to the unmodified graphene despite the formation of aggregates. The improved flexibility of the epoxy nanocomposites and EMI shielding characteristics of HMDA functionalized graphene offers a practical solution for textile coatings with microwave absorbing (MA) capacity.

Strippable Polymeric Nanocomposites Comprising "Green" Chelates, for the Removal of Heavy Metals and Radionuclides.

The issue of heavy metal and radionuclide contamination is still causing a great deal of concern worldwide for environmental protection and industrial sites remediation. Various techniques have been developed for surface decontamination aiming for high decontamination factors (DF) and minimal environmental impact, but strippable polymeric nanocomposite coatings are some of the best candidates in this area. In this study, novel strippable coatings for heavy metal and radionuclides decontamination were developed based on the film-forming ability of polyvinyl alcohol, with the remarkable metal retention capacity of bentonite nanoclay, together with the chelating ability of sodium alginate and with "new-generation" "green" complexing agents: iminodisuccinic acid (IDS) and 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC). These environmentally friendly water-based decontamination solutions are capable of generating strippable polymeric films with optimized mechanical and thermal properties while exhibiting high decontamination efficiency (DF ≈ 95-98% for heavy metals tested on glass surface and DF ≈ 91-97% for radionuclides 241Am, 90Sr-Y and 137Cs on metal, painted metal, plastic, and glass surfaces).

Eco-Friendly Peelable Active Nanocomposite Films Designed for Biological and Chemical Warfare Agents Decontamination.

In the context of imminent threats concerning biological and chemical warfare agents, the aim of this study was the development of a new method for biological and chemical decontamination, employing non-toxic, film-forming, water-based biodegradable solutions, using a nano sized reagent together with bentonite as trapping agents for the biological and chemical contaminants. Bentonite-supported nanoparticles of Cu, TiO2, and Ag were successfully synthesized and dispersed in a polyvinyl alcohol (PVA)/glycerol (GLY) aqueous solution. The decontamination effectiveness of the proposed solutions was evaluated by qualitative and quantitative analytical techniques on various micro-organisms, with sulfur mustard (HD) and dimethyl methylphosphonate (DMMP) as contaminants. The results indicate that the peelable active nanocomposite films can be successfully used on contaminated surfaces to neutralize and entrap the hazardous materials and their degradation products. Mechanical and thermal characterization of the polymeric films was also performed to validate the decontamination solution's potential as peelable-film generating materials. The removal efficacy from the contaminated surfaces for the tested micro-organisms varied between 93% and 97%, while for the chemical agent HD, the highest decontamination factor obtained was 90.89%. DMMP was almost completely removed from the contaminated surfaces, and a decontamination factor of 99.97% was obtained.

Novel Polyurethanes Based on Recycled Polyethylene Terephthalate: Synthesis, Characterization, and Formulation of Binders for Environmentally Responsible Rocket Propellants.

Novel polyurethane-based binders, specifically designed for environmentally responsible rocket propellant composites, were obtained by employing the polyester-polyols that resulted from the degradation of polyethylene terephthalate waste. A new class of "greener" rocket propellants, comprising polyurethanes (based on recycled PET) as the binder, phase stabilized ammonium nitrate (PSAN) as the eco-friendly oxidizer, and triethylene glycol dinitrate (TEGDN) as the energetic plasticizer, together with aluminum as fuel and Fe2O3 as the catalyst, is herein reported. The components of the energetic mixtures were investigated (individually and as composite materials) through specific analytical tools: 1H-NMR, FT-IR, SEM-EDX, DTA and TGA, tensile and compression tests, DMA, and micro-CT. Moreover, the feasibility of this innovative solution is sustained by the ballistic performances exhibited by these composite materials in a subscale rocket motor, proving that these new formulations are suitable for rocket propellant applications.

Magnetic silica particles functionalized with guanidine derivatives for microwave-assisted transesterification of waste oil.

This study aimed to develop a facile synthesis procedure for heterogeneous catalysts based on organic guanidine derivatives superbases chemically grafted on silica-coated Fe3O4 magnetic nanoparticles. Thus, the three organosilanes that were obtained by reacting the selected carbodiimides (N,N'-dicyclohexylcarbodiimide (DCC), N,N'-diisopropylcarbodiimide (DIC), respectively 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) with 3-aminopropyltriethoxysilane (APTES) were used in a one-pot synthesis stage for the generation of a catalytic active protective shell through the simultaneous hydrolysis/condensation reaction with tetraethyl orthosilicate (TEOS). The catalysts were characterized by FTIR, TGA, SEM, BET and XRD analysis confirming the successful covalent attachment of the organic derivatives in the silica shell. The second aim was to highlight the capacity of microwaves (MW) to intensify the transesterification process and to evaluate the activity, stability, and reusability characteristics of the catalysts. Thus, in MW-assisted transesterification reactions, all catalysts displayed FAME yields of over 80% even after 5 reactions/activation cycles. Additionally, the influence of FFA content on the catalytic activity was investigated. As a result, in the case of Fe3O4@SiO2-EDG, a higher tolerance towards the FFA content can be noticed with a FAME yield of over 90% (for a 5% (weight) vs oil catalyst content) and 5% weight FFA content.

Novel Chemical Architectures Based on Beta-Cyclodextrin Derivatives Covalently Attached on Polymer Spheres.

This study presents the synthesis and characterization of polymer derivatives of beta-cyclodextrin (BCD), obtained by chemical grafting onto spherical polymer particles (200 nm) presenting oxirane functional groups at their surface. The polymer spheres were synthesized by emulsion polymerization of styrene (ST) and hydroxyethyl methacrylate (HEMA), followed by the grafting on the surface of glycidyl methacrylate (GMA) by seeded emulsion polymerization. The BCD-polymer derivatives were obtained using two BCD derivatives with hydroxylic (BCD-OH) and amino groups (BCD-NH2). The degree of polymer covalent functionalization using the BCD-OH and BCD-NH2 derivatives were determined to be 4.27 and 19.19 weight %, respectively. The adsorption properties of the materials were evaluated using bisphenol A as a target molecule. The best fit for the adsorption kinetics was Lagergren's model (both for Qe value and for R2) together with Weber's intraparticle diffusion model in the case of ST-HEMA-GMA-BCD-NH2. The isothermal adsorption evaluation indicated that both systems follow a Langmuir type behavior and afforded a Qmax value of 148.37 mg g-1 and 37.09 mg g-1 for ST-HEMA-GMA-BCD-NH2 and ST-HEMA-GMA-BCD-OH, respectively. The BCD-modified polymers display a degradation temperature of over 400 °C which can be attributed to the existence of hydrogen bonds and BCD thermal degradation pathway in the presence of the polymers.