Multistep loading of titania nanoparticles in the mesopores of SBA-15 for enhanced photocatalytic activity.

A multistep deposition of anatase nanoparticles was employed to incorporate high amounts of titania into the mesopores of SBA-15. Anatase nanoparticles were synthesized and deposited following the Acid Catalyzed Sol Gel method. With this method, the size of the anatase nanoparticles can be controlled and therefore, the titania loading into the mesopores of SBA-15 can be controlled. Through multistep deposition of anatase nanoparticles, a further increase of titania loading into the mesoporous channels can be obtained. For the degradation of Rhodamine-6G, the samples synthesized by multistep deposition showed an enhanced photocatalytic activity.

Characterisation of the surface composition in electrospun nanowebs with static secondary ion mass spectrometry (S-SIMS).

Electrospinning is a recently rediscovered method to produce non-woven nanowebs of which the individual polymer fibres have diameters of 50-500nm. Applications require specific functionalities to be present at the surface. The use of additives in the electrospun solution provides an elegant alternative to functionalised polymers. This study has focused on the use of the static secondary ion mass spectrometry (S-SIMS) to characterise the surface composition of nanofibres electrospun from acetone solutions containing 15% (w/w) of poly(varepsilon-caprolactone) (PCL, molecular weight 40,000) and 0-15mol% (relative to PCL) cetyltrimethylammonium bromide (CTAB). Specifically, the calibration of the relative signal intensities of structural ions from PCL and CTAB as a function of the local concentrations requires adequate reference samples to be prepared. In general, this step becomes a major bottleneck in nanoscale analysis. A relatively simple method using a combination of spincoating and hand barcoating of solutions has been developed. Its applicability and limitations for monitoring the surface enrichment of CTAB in PCL nanowebs are discussed.