RESUMO
The molecule-metal interface is of paramount importance for many devices and processes, and directly involved in photocatalysis, molecular electronics, nanophotonics, and molecular (bio-)sensing. Here the photostability of this interface is shown to be sensitive even to room light levels for specific molecules and metals. Optical spectroscopy is used to track photoinduced migration of gold atoms when functionalised with different thiolated molecules that form uniform monolayers on Au. Nucleation and growth of characteristic surface metal nanostructures is observed from the light-driven adatoms. By watching the spectral shifts of optical modes from nanoparticles used to precoat these surfaces, we identify processes involved in the photo-migration mechanism and the chemical groups that facilitate it. This photosensitivity of the molecule-metal interface highlights the significance of optically induced surface reconstruction. In some catalytic contexts this can enhance activity, especially utilising atomically dispersed gold. Conversely, in electronic device applications such reconstructions introduce problematic aging effects.
RESUMO
[This corrects the article DOI: 10.1021/acscatal.3c03951.].
RESUMO
The rapid uptake of lithium ion batteries (LIBs) for large scale electric vehicle and energy storage applications requires a deeper understanding of the degradation mechanisms. Capacity fade is due to the complex interplay between phase transitions, electrolyte decomposition and transition metal dissolution; many of these poorly understood parasitic reactions evolve gases as a side product. Here we present an on-chip electrochemistry mass spectrometry method that enables ultra-sensitive, fully quantified and time resolved detection of volatile species evolving from an operating LIB. The technique's electrochemical performance and mass transport is described by a finite element model and then experimentally used to demonstrate the variety of new insights into LIB performance. We show the versatility of the technique, including (a) observation of oxygen evolving from a LiNiMnCoO2 cathode and (b) the solid electrolyte interphase formation reaction on graphite in a variety of electrolytes, enabling the deconvolution of lithium inventory loss (c) the first direct evidence, by virtue of the improved time resolution of our technique, that carbon dioxide reduction to ethylene takes place in a lithium ion battery. The emerging insight will guide and validate battery lifetime models, as well as inform the design of longer lasting batteries.
RESUMO
Li-mediated ammonia synthesis is, thus far, the only electrochemical method for heterogeneous decentralized ammonia production. The unique selectivity of the solid electrode provides an alternative to one of the largest heterogeneous thermal catalytic processes. However, it is burdened with intrinsic energy losses, operating at a Li plating potential. In this work, we survey the periodic table to understand the fundamental features that make Li stand out. Through density functional theory calculations and experimentation on chemistries analogous to lithium (e.g., Na, Mg, Ca), we find that lithium is unique in several ways. It combines a stable nitride that readily decomposes to ammonia with an ideal solid electrolyte interphase, balancing reagents at the reactive interface. We propose descriptors based on simulated formation and binding energies of key intermediates and further on hard and soft acids and bases (HSAB principle) to generalize such features. The survey will help the community toward electrochemical systems beyond Li for nitrogen fixation.
RESUMO
The performance of the Li-mediated ammonia synthesis has progressed dramatically since its recent reintroduction. However, fundamental understanding of this reaction is slower paced, due to the many uncontrolled variables influencing it. To address this, we developed a true nonaqueous LiFePO4 reference electrode, providing both a redox anchor from which to measure potentials against and estimates of sources of energy efficiency loss. We demonstrate its stable electrochemical potential in operation using different N2- and H2-saturated electrolytes. Using this reference, we uncover the relation between partial current density and potentials. While the counter electrode potential increases linearly with current, the working electrode remains stable at lithium plating, suggesting it to be the only electrochemical step involved in this process. We also use the LiFePO4/Li+ equilibrium as a tool to probe Li-ion activity changes in situ. We hope to drive the field toward more defined systems to allow a holistic understanding of this reaction.
RESUMO
Single-atom catalysts, in particular the Fe-N-C family of materials, have emerged as a promising alternative to platinum group metals in fuel cells as catalysts for the oxygen reduction reaction. Numerous theoretical studies have suggested that dual atom catalysts can appreciably accelerate catalytic reactions; nevertheless, the synthesis of these materials is highly challenging owing to metal atom clustering and aggregation into nanoparticles during high temperature synthesis treatment. In this work, dual metal atom catalysts are prepared by controlled post synthetic metal-coordination in a C2N-like material. The configuration of the active sites was confirmed by means of X-ray adsorption spectroscopy and scanning transmission electron microscopy. During oxygen reduction, the catalyst exhibited an activity of 2.4 ± 0.3 A gcarbon -1 at 0.8 V versus a reversible hydrogen electrode in acidic media, comparable to the most active in the literature. This work provides a novel approach for the targeted synthesis of catalysts containing dual metal sites in electrocatalysis.
RESUMO
The increasing commercial use of engineered zinc oxide nanomaterials necessitates a thorough understanding of their behavior following their release into wastewater. Herein, the fates of zinc oxide nanoparticles (ZnO NPs) and ionic Zn in a real primary sludge collected from a municipal wastewater system are studied via stable isotope tracing at an environmentally relevant spiking concentration of 15.2 µg g-1. Due to rapid dissolution, nanoparticulate ZnO does not impart particle-specific effects, and the Zn ions from NP dissolution and ionic Zn display indistinguishable behavior as they partition equally between the solid, liquid, and ultrafiltrate phases of the sludge over a 4-h incubation period. This work provides important constraints on the behavior of engineered ZnO nanomaterials in primary sludge-the first barrier in a wastewater treatment plant-at low, realistic concentrations. As the calculated solid-liquid partition coefficients are significantly lower than those reported in prior studies that employ unreasonably high spiking concentrations, this work highlights the importance of using low, environmentally relevant doses of engineered nanomaterials in experiments to obtain accurate risk assessments.
RESUMO
Coating superparamagnetic iron oxide NPs with SiO2 has been established in order to confer stability in acidic media. Acid stability tests were carried out between pH 1 and pH 7 to determine the effectiveness of the SiO2 passivating layer to protect the magnetic Fe3O4 core. Transmission Electron Microscopy (TEM) and zeta potential measurements have shown that uncoated Fe3O4 NPs exhibit rapid agglomeration and dissolution when exposed to acidic media, moving from a zeta potential of - 26 mV to a zeta potential of + 3 mV. In contrast, the SiO2 coating of the Fe3O4 NPs shows a very high degree of stability for over 14 months and the zeta potential of these NPs remained at â¼- 39 mV throughout the acid exposure and they showed no loss in magnetisaton. Due to the use of these NPs as a potential tool for heavy metal extraction, the stability of the surface functionalisation (in this case a phosphate complex) was also assessed. With a constant zeta potential of â¼ - 29 mV for POx-SiO2@Fe3O4 NP complex, the phosphate functionality was shown to be highly stable in the acidic conditions simulating the environment of certain nuclear wastes. ATR-FTIR was conducted after acid exposure confirming that the phosphate complex on the surface of the NPs remained present. Finally, preliminary sorption experiments were carried out with Pb(II), where the NP complexes shown complete removal of the heavy metals at pH 3 and pH 5.
Assuntos
Nanopartículas de Magnetita , Metais Pesados , Nanopartículas , Adsorção , Radioisótopos , Dióxido de SilícioRESUMO
Tuberculosis (TB) is caused by a bacterial infection that affects a number of human organs, primarily the lungs, but also the liver, spleen, and spine, causing key symptoms of fever, fatigue, and persistent cough, and if not treated properly, can be fatal. Every year, 10 million individuals become ill with active TB resulting with a mortality approximating 1.5 million. Current treatment guidelines recommend oral administration of a combination of first-line anti-TB drugs for at least 6 months. While efficacious under optimum conditions, 'Directly Observed Therapy Short-course' (DOTS) is not without problems. The long treatment time and poor pharmacokinetics, alongside drug side effects lead to poor patient compliance and has accelerated the emergence of multi-drug resistant (MDR) organisms. All this, combined with the limited number of newly discovered TB drugs to treat MDR-TB and shorten standard therapy time, has highlighted the need for new targeted drug delivery systems. In this respect, there has been recent focus on micro- and nano-particle technologies to prepare organic or/and metal particles loaded with TB drugs to enhance their efficacy by targeted delivery via the inhaled route. In this review, we provide a brief overview of the current epidemiology of TB, and risk factors for progression of latent stage tuberculosis (LTBI) to the active TB. We identify current TB treatment regimens, newly discovered TB drugs, and identify studies that have used micro- or nano-particles technologies to design a reliable inhalation drug delivery system to treat TB more effectively.
Assuntos
Mycobacterium tuberculosis , Preparações Farmacêuticas , Tuberculose , Antituberculosos/efeitos adversos , Humanos , Íons , Tuberculose/tratamento farmacológicoRESUMO
Interactions between iron surfaces and hydrocarbons are the basis for a wide range of materials synthesis processes and novel applications, including sensing. However, in diesel engines these interactions can lead to deposit formation that reduces performance, lowers efficiency, and increases emissions. Here, we present a global study to understand deposition at iron-hexadecane interfaces. We use a combination of spectroscopy, microscopy, and mass spectrometry to investigate surface reactions, bulk chemistry, and deposition processes. A dynamic equilibrium between the oxidation products, both at the surface and in solution, determines the deposition at the surface. Considering the solution and the surface in parallel, we find that the iron speciation affects the morphology, composition, and quantity of the deposit at the surface, as well as the oxidation of hexadecane. Fe(II) and Fe(III) both promote the decomposition of peroxides-intermediates in the oxidation of hexadecane-but through noncatalytic and catalytic mechanisms, respectively. In contrast, Fe(0) is proposed to initiate hexadecane autoxidation during its oxidation to Fe(III). We find that in all cases, the surfaces exclusively contain Fe(III) following heat treatment with hexadecane. Upon subsequent exposure at room temperature, Fe(III) species are found to promote oxidation; this finding is particularly concerning for hybrid vehicles where longer time periods are expected between engine operation. Our work provides a foundation for the development of strategies that disrupt the role of iron in the degradation of hexadecane to ultimately reduce oxidation and deposition in diesel engines.
RESUMO
Functionalized gold nanostars (AuStrs) are remarkable candidates for drug delivery, photothermal therapy and imaging due to their large surface area to volume ratio and plasmonic properties. In this study, we address the challenge of achieving therapeutically controlled dosing using these high aspect ratio nanoparticle vectors by tailoring the nanostar loading area and protein conformation. We synthesized a library of different Au nanostars with varied geometries for potential biomedical applications. The Au nanostars were subsequently coated with different amounts of transferrin (Tf) and a novel depletion method was devised to measure the amount of Tf bound to the surface of the nanostructures. This methodology allowed us to show that coating thickness could be controllably varied and moulded onto the nanoparticle's high index features, whilst simultaneously preserving the key properties of the particle. The orientation of the Tf was measured on nanostars and spheres using transmission electron microscopy by negatively staining the Tf. The Tf was conformal on the nanostars, and protein packing efficiency increased on the AuStrs by 14-fold due to a geometry-induced protein reorientation at the nanoparticle surface. Interestingly, the reorientation of the transferrin observed at the AuStrs spikes did not occur at the AuStrs tips thus highlighting surface energy effects associated with surface curvature.
RESUMO
Zinc oxide engineered nanomaterials (ZnO ENMs) are used in a variety of applications worldwide due to their optoelectronic and antibacterial properties with potential contaminant risk to the environment following their disposal. One of the main potential pathways for ZnO nanomaterials to reach the environment is via urban wastewater treatment plants. So far there is no technique that can provide spatiotemporal nanoscale information about the rates and mechanisms by which the individual nanoparticles transform. Fundamental knowledge of how the surface chemistry of individual particles change, and the heterogeneity of transformations within the system, will reveal the critical physicochemical properties determining environmental damage and deactivation. We applied a methodology based on spatially resolved in situ X-ray fluorescence microscopy (XFM), allowing observation of real-time dissolution and morphological and chemical evolution of synthetic template-grown ZnO nanorods (â¼725 nm length, â¼140 nm diameter). Core-shell ZnO-ZnS nanostructures were formed rapidly within 1 h, and significant amounts of ZnS species were generated, with a corresponding depletion of ZnO after 3 h. Diffuse nanoparticles of ZnS, Zn3(PO4)2, and Zn adsorbed to Fe-oxyhydroxides were also imaged in some nonsterically impeded regions after 3 h. The formation of diffuse nanoparticles was affected by ongoing ZnO dissolution (quantified by inductively coupled plasma mass spectrometry) and the humic acid content in the simulated sludge. Complementary ex situ X-ray absorption spectroscopy and scanning electron microscopy confirmed a significant decrease in the ZnO contribution over time. Application of time-resolved XFM enables predictions about the rates at which ZnO nanomaterials transform during their first stages of the wastewater treatment process.
RESUMO
There are no methods sensitive enough to detect enzymes within cells, without the use of analyte labeling. Here we show that it is possible to detect protein ion signals of three different H2S-synthesizing enzymes inside microglia after pretreatment with silver nanowires (AgNW) using time-of-flight secondary ion mass spectrometry (TOF-SIMS). Protein fragment ions, including the fragment of amino acid (C4H8N+ = 70 amu), fragments of the sulfur-producing cystathionine-containing enzymes, and the Ag+ ion signal could be detected without the use of any labels; the cells were mapped using the C4H8N+ amino acid fragment. Scanning electron microscopy imaging and energy-dispersive X-ray chemical analysis showed that the AgNWs were inside the same cells imaged by TOF-SIMS and transformed chemically into crystalline Ag2S within cells in which the sulfur-producing proteins were detected. The presence of these sulfur-producing cystathionine-containing enzymes within the cells was confirmed by Western blots and confocal microscopy images of fluorescently labeled antibodies against the sulfur-producing enzymes. Label-free TOF-SIMS is very promising for the label-free identification of H2S-contributing enzymes and their cellular localization in biological systems. The technique could in the future be used to identify which of these enzymes are most contributory.
Assuntos
Cistationina beta-Sintase/metabolismo , Cistationina gama-Liase/metabolismo , Microglia/enzimologia , Prata/farmacologia , Enxofre/química , Sulfurtransferases/metabolismo , Animais , Transporte Biológico , Linhagem Celular Transformada , Camundongos , Microglia/efeitos dos fármacos , Microglia/ultraestrutura , Microscopia Eletrônica de Varredura , Imagem Molecular/instrumentação , Imagem Molecular/métodos , Nanofios/química , Prata/química , Espectrometria de Massa de Íon Secundário , Enxofre/metabolismoRESUMO
Metal-enhanced fluorescence (MEF), resulting from the near-field interaction of fluorophores with metallic nanostructures, has emerged as a powerful tool for dramatically improving the performance of fluorescence-based biomedical applications. Allowing for lower autofluorescence and minimal photoinduced damage, the development of multifunctional and multiplexed MEF platforms in the near-infrared (NIR) windows is particularly desirable. Here, a low-cost fabrication method based on nanosphere lithography is applied to produce tunable three-dimensional (3D) gold (Au) nanohole-disc arrays (Au-NHDAs). The arrays consist of nanoscale glass pillars atop nanoholes in a Au thin film: the top surfaces of the pillars are Au-covered (effectively nanodiscs), and small Au nanoparticles (nanodots) are located on the sidewalls of the pillars. This 3D hole-disc (and possibly nanodot) construct is critical to the properties of the device. The versatility of our approach is illustrated through the production of uniform and highly reproducible Au-NHDAs with controlled structural properties and tunable optical features in the NIR windows. Au-NHDAs allow for a very large NIR fluorescence enhancement (more than 400 times), which is attributed to the 3D plasmonic structure of the arrays that allows strong surface plasmon polariton and localized surface plasmon resonance coupling through glass nanogaps. By considering arrays with the same resonance peak and the same nanodisc separation distance, we show that the enhancement factor varies with nanodisc diameter. Using computational electromagnetic modeling, the electric field enhancement at 790 nm was calculated to provide insights into excitation enhancement, which occurs due to an increase in the intensity of the electric field. Fluorescence lifetime measurements indicate that the total fluorescence enhancement may depend on controlling excitation enhancement and therefore the array morphology. Our findings provide important insights into the mechanism of MEF from 3D plasmonic arrays and establish a low-cost versatile approach that could pave the way for novel NIR-MEF bioapplications.
Assuntos
Pesquisa Biomédica , Nanopartículas Metálicas/química , Nanoestruturas/química , Fluorescência , Corantes Fluorescentes/química , Corantes Fluorescentes/provisão & distribuição , Ouro/química , Nanopartículas Metálicas/uso terapêutico , Nanosferas/química , Ressonância de Plasmônio de SuperfícieRESUMO
There is a need for novel strategies to treat aggressive breast cancer subtypes and overcome drug resistance. ZnO nanoparticles (NPs) have potential in cancer therapy due to their ability to potently and selectively induce cancer cell apoptosis. Here, we tested the in vitro chemotherapeutic efficacy of ZnONPs loaded via a mesoporous silica nanolayer (MSN) towards drug-sensitive breast cancer cells (MCF-7: estrogen receptor-positive, CAL51: triple-negative) and their drug-resistant counterparts (MCF-7TX, CALDOX). ZnO-MSNs were coated on to gold nanostars (AuNSs) for future imaging capabilities in the NIR-II range. Electron and confocal microscopy showed that MSN-ZnO-AuNSs accumulated close to the plasma membrane and were internalized by cells. High-resolution electron microscopy showed that MSN coating degraded outside the cells, releasing ZnONPs that interacted with cell membranes. MSN-ZnO-AuNSs efficiently reduced the viability of all cell lines, and CAL51/CALDOX cells were more susceptible than MCF7/MCF-7-TX cells. MSN-ZnO-AuNSs were then conjugated with the antibody to Frizzled-7 (FZD-7), the receptor upregulated by several breast cancer cells. We used the disulphide (S-S) linker that could be cleaved with a high concentration of glutathione normally observed within cancer cells, releasing Zn2+ into the cytoplasm. FZD-7 targeting resulted in approximately three-fold amplified toxicity of MSN-ZnO-AuNSs towards the MCF-7TX drug-resistant cell line with the highest FZD-7 expression. This study shows that ZnO-MSs are promising tools to treat triple-negative and drug-resistant breast cancers and highlights the potential clinical utility of FZD-7 for delivery of nanomedicines and imaging probes specifically to these cancer types.
Assuntos
Antineoplásicos Imunológicos , Neoplasias da Mama/tratamento farmacológico , Portadores de Fármacos , Receptores Frizzled/antagonistas & inibidores , Nanopartículas , Óxido de Zinco , Antineoplásicos/química , Antineoplásicos/farmacologia , Antineoplásicos Imunológicos/química , Antineoplásicos Imunológicos/farmacologia , Apoptose/efeitos dos fármacos , Neoplasias da Mama/metabolismo , Neoplasias da Mama/patologia , Sobrevivência Celular , Portadores de Fármacos/química , Portadores de Fármacos/farmacologia , Liberação Controlada de Fármacos , Feminino , Receptores Frizzled/metabolismo , Humanos , Células MCF-7 , Nanopartículas/química , Nanopartículas/uso terapêutico , Óxido de Zinco/química , Óxido de Zinco/farmacologiaRESUMO
The degradation mechanism of La(Fe,Mn,Si)13Hx has been examined under conditions representative of the complex operating parameters of a refrigeration cycle. The magnetic field effects are found to be dominated by magneto-transport and are most significant when the material is in its paramagnetic state - resulting in significantly accelerated corrosion rates.
RESUMO
Sensitive detection of disease biomarkers expressed by human cells is critical to the development of novel diagnostic and therapeutic methods. Here we report that plasmonic arrays based on gold nanostar (AuNS) monolayers enable up to 19-fold fluorescence enhancement for cellular imaging in the near-infrared (NIR) biological window, allowing the application of low quantum yield fluorophores for sensitive cellular imaging. The high fluorescence enhancement together with low autofluorescence interference in this wavelength range enable higher signal-to-noise ratio compared to other diagnostic modalities. Using AuNSs of different geometries and therefore controllable electric field enhancement, cellular imaging with tunable enhancement factors is achieved, which may be useful for the development of multicolour and multiplexed platforms for a panel of biomarkers, allowing to distinguish different subcell populations at the single cell level. Finally, the uptake of AuNSs within HeLa cells and their high biocompatibility, pave the way for novel high-performance in vitro and in vivo diagnostic platforms.
RESUMO
Gold nanostars (AuNSs) are promising agents for the development of high-performance diagnostic devices, by enabling metal enhanced fluorescence (MEF) in the physiological near-infrared (NIR) and second near-infrared (NIR-II) windows. The local electric field near their sharp tips and between their branches can be enhanced by several orders of magnitude, holding great promise for large fluorescence enhancements from single AuNS particles, rather than relying on interparticle coupling in nanoparticle substrates. Here, guided by electric field simulations, two different types of AuNSs with controlled morphologies and plasmonic responses in the NIR and NIR-II regions are used to investigate the mechanism of MEF from colloidal AuNSs. Fluorophore conjugation to AuNSs allows significant fluorescence enhancement of up to 30 times in the NIR window, and up to 4-fold enhancement in the NIR-II region. Together with other inherent advantages of AuNSs, including their multispike morphology offering easy access to cell membranes and their large surface area providing flexible multifunctionality, AuNS are promising for the development of in vivo imaging applications. Using time-resolved fluorescence measurements to deconvolute semi-quantitatively excitation enhancement from emission enhancement, we show that a combination of enhanced excitation and an increased radiative decay rate, both contribute to the observed large enhancement. In accordance to our electric field modelling, however, excitation enhancement is the component that varies most with particle morphology. These findings provide important insights into the mechanism of MEF from AuNSs, and can be used to further guide particle design for high contrast enhancement, enabling the development of MEF biodetection technologies.
RESUMO
Zinc oxide (ZnO) nanorods (NRs) have been demonstrated as a promising platform for enhanced fluorescence-based sensing. It is, however, desirable to achieve a tuneable fluorescence enhancement with these platforms so that the fluorescence output can be adjusted based on the real need. Here we show that the fluorescence enhancement can be tuned by changing the diameter of the ZnO nanorods, simply controlled by potassium chloride (KCl) concentration during synthesis, using arrays of previously developed aligned NRs (a.k.a. aligned NR forests) and nanoflowers (NFs). Combining the experimental results obtained from ZnO nanostructures with controlled morphology and computer-aided verification, we show that the fluorescence enhancement factor increases when ZnO NRs become thicker. The fluorescence enhancement factor of NF arrays is shown to have a much stronger dependency on the rod diameter than that of aligned NR arrays. We prove that the morphology of nanostructures, which can be controlled, can be an important factor for fluorescence enhancement. Our (i) effort towards understanding the structure-property relationships of ZnO nanostructured arrays and (ii) demonstration on tuneable fluorescence enhancement by nanostructure engineering can provide some guidance towards the rational design of future fluorescence amplification platforms potentially for bio-sensing.
RESUMO
Mycobacterium tuberculosis ( M.tb) has the extraordinary ability to adapt to the administration of antibiotics through the development of resistance mechanisms. By rapidly exporting drugs from within the cytosol, these pathogenic bacteria diminish antibiotic potency and drive the presentation of drug-tolerant tuberculosis (TB). The membrane integrity of M.tb is pivotal in retaining these drug-resistant traits. Silver (Ag) and zinc oxide (ZnO) nanoparticles (NPs) are established antimicrobial agents that effectively compromise membrane stability, giving rise to increased bacterial permeability to antibiotics. In this work, biodegradable multimetallic microparticles (MMPs), containing Ag NPs and ZnO NPs, were developed for use in pulmonary delivery of antituberculous drugs to the endosomal system of M.tb-infected macrophages. Efficient uptake of MMPs by M.tb-infected THP1 cells was demonstrated using an in vitro macrophage infection model, with direct interaction between MMPs and M.tb visualized with the use of electron FIB-SEM tomography. The release of Ag NPs and ZnO NPs within the macrophage endosomal system increased the potency of the model antibiotic rifampicin by as much as 76%, realized through an increase in membrane disorder of intracellular M.tb. MMPs were effective at independently driving membrane destruction of extracellular bacilli located at the exterior face of THP1 macrophages. This MMP system presents as an effective drug delivery vehicle that could be used for the transport of antituberculous drugs such as rifampicin to infected alveolar macrophages, while increasing drug potency. By increasing M.tb membrane permeability, such a system may prove effectual in improving treatment of drug-susceptible TB in addition to M.tb strains considered drug-resistant.