Hectorite/Phenanthroline-Based Nanomaterial as Fluorescent Sensor for Zn Ion Detection: A Theoretical and Experimental Study.

The development of fluorescent materials that can act as sensors for the determination of metal ions in biological fluids is important since they show, among others, high sensitivity and specificity. However, most of the molecules that are used for these purposes possess a very low solubility in aqueous media, and, thus, it is necessary to adopt some derivation strategies. Clay minerals, for example, hectorite, as natural materials, are biocompatible and available in large amounts at a very low cost that have been extensively used as carrier systems for the delivery of different hydrophobic species. In the present work, we report the synthesis and characterization of a hectorite/phenanthroline nanomaterial as a potential fluorescent sensor for Zn ion detection in water. The interaction of phenanthroline with the Ht interlaminar space was thoroughly investigated, via both theoretical and experimental studies (i.e., thermogravimetry, FT-IR, UV-vis and fluorescence spectroscopies and XRD measurements), while its morphology was imaged by scanning electron microscopy. Afterwards, the possibility to use it as sensor for the detection of Zn2+ ions, in comparison to other metal ions, was investigated through fluorescent measurements, and the stability of the solid Ht/Phe/Zn complex was assessed by different experimental and theoretical measurements.

Carrier capability of halloysite nanotubes for the intracellular delivery of antisense PNA targeting mRNA of neuroglobin gene.

Peptide nucleic acid (PNA) is a DNA mimic that shows good stability against nucleases and proteases, forming strongly recognized complementary strands of DNA and RNA. However, due to its feeble ability to cross the cellular membrane, PNA activity and its targeting gene action is limited. Halloysite nanotubes (HNTs) are a natural and low-cost aluminosilicate clay. Because of their peculiar ability to cross cellular membrane, HNTs represent a valuable candidate for delivering genetic materials into cells. Herein, two differently charged 12-mer PNAs capable of recognizing as molecular target a 12-mer DNA molecule mimicking a purine-rich tract of neuroglobin were synthetized and loaded onto HNTs by electrostatic attraction interactions. After characterization, the kinetic release was also assessed in media mimicking physiological conditions. Resonance light scattering measurements assessed their ability to bind complementary single-stranded DNA. Furthermore, their intracellular delivery was assessed by confocal laser scanning microscopy on living MCF-7 cells incubated with fluorescence isothiocyanate (FITC)-PNA and HNTs labeled with a probe. The nanomaterials were found to cross cellular membrane and cell nuclei efficiently. Finally, it is worth mentioning that the HNTs/PNA can reduce the level of neuroglobin gene expression, as shown by reverse transcription-quantitative polymerase chain reaction and western blotting analysis.

Thixotropic Hydrogels Based on Laponite® and Cucurbituril for Delivery of Lipophilic Drug Molecules.

Nowadays the use of hydrogels for biomedical purposes is increasing because of their interesting features that allow the development of targeted drug delivery systems. Herein, hydrogel based on Laponite® (Lap) clay mineral as gelator and cucurbit[6]uril (CB[6]) molecules were synthetized for the delivery of flufenamic acid (FFA) for potential topical application. Firstly, the interaction between CB[6] and FFA was assessed by UV-vis spectroscopic measurements and molecular modeling calculations. Then, the obtained complex was used as filler for Lap hydrogel (Lap/CB[6]/FFA). The properties of the hydrogel in terms of viscosity and, self-repair abilities were investigated; its morphology was imaged by scanning electron and polarized optical microscopies. Furthermore, the changes in the hydrodynamic radii and in the colloidal stability of CB[6]/Lap mixture were investigated in terms of translational diffusion from dynamic light scattering and ζ-potential measurements. Finally, the kinetic in vitro release of FFA, from Lap/CB[6]/FFA hydrogel, was studied in a medium mimicking the pH of skin and the obtained results were discussed both by an experimental point of view and by molecular modeling calculations.

Thixotropic Hydrogels Based on Laponite® and Cucurbituril for Delivery of Lipophilic Drug Molecules.

Invited for this month's cover are the collaborating groups of Prof. Serena Riela at University of Catania, Prof. César Viseras at University of Granada and Dr. Ignacio Sainz-Diaz at Instituto Andaluz de Ciencias de la Tierra. The cover picture shows the possible application of the developed system. In particular, flufenamic acid, anti-inflammatory and anti-pyretic drug, was complexed into cucurbituril cavity and the supramolecular system obtained was used as filler for laponite® hydrogel for its topical delivery. More information can be found in the Research Article by Viseras-Iborra, Riela, and co-workers.

Nanoformulations based on collagenases loaded into halloysite/Veegum® clay minerals for potential pharmaceutical applications.

The design and development of nanomaterials capable of penetrate cancer cells is fundamental when anticancer therapy is involved. The use of collagenase (Col) is useful since this enzyme can degrade collagen, mainly present in the tumor extracellular matrix. However, its use is often limited since collagenase suffers from inactivation and short half-life. Use of recombinant ultrapure collagenase or carrier systems for their delivery are among the strategies adopted to increase the enzyme stability. Herein, based on the more stability showed by recombinant enzymes and the possibility to use them in anticancer therapy, we propose a novel strategy to further increase their stability by using halloysite nanotubes (HNTs) as carrier. ColG and ColH were supramolecularly loaded onto HNTs and used as fillers for Veegum gels. The systems could be used for potential local administration of collagenases for solid tumor treatment. All techniques adopted for characterization showed that halloysite interacts with collagenases in different ways depending with the Col considered. Furthermore, the hydrogels showed a very slow release of the collagenases within 24 h. Finally, biological assays were performed by studying the digestion of a type-I collagen matrix highlighting that once released the Col still possessed some activity. Thus we developed carrier systems that could further increase the high recombinant collagenases stability, preventing their inactivation in future in vivo applications for potential local tumor treatment.

Investigation into Brazilian Palygorskite for Its Potential Use as Pharmaceutical Excipient: Perspectives and Applications.

Palygorskite is an aluminum and magnesium silicate characterized by its fibrous morphology, providing it with great versatility in industrial applications, including pharmaceuticals. Although most of the reserves are in the United States, in recent years occurrences of commercially exploited deposits in Brazil have been recorded, mainly in the country's northeast region. This has motivated this study, which analyzes raw Brazilian palygorskite compared to a commercial sample (Pharmasorb® colloidal) to demonstrate its pharmaceutical potential. The chemical and mineral composition of the samples were evaluated for surface properties, granulometry, morphology, crystallography, thermal analysis, and spectroscopy. Raw palygorskite presented 67% purity, against 74% for Pharmasorb® colloidal. The percentage purity relates to the presence of contaminants, mainly carbonates and quartz (harmless under conventional conditions of pharmaceutical use). Furthermore, it was possible to confirm the chemical composition of these phyllosilicates, formed primarily of silicon, aluminum, and magnesium oxides. The crystallographic and spectroscopic profiles were consistent in both samples, showing characteristic peaks for palygorskite (2θ = 8.3°) and bands attributed to fibrous phyllosilicates below 1200 cm-1, respectively. The thermal analysis allowed the identification of the main events of palygorskite, with slight differences between the evaluated samples: loss of water adsorbed onto the surface (~85 °C), removal of water contained in the channels (~200 °C), coordinated water loss (~475 °C), and, finally, the dehydroxylation (>620 °C). The physicochemical characteristics of raw palygorskite align with pharmacopeial specifications, exhibiting a high specific surface area (122 m2/g), moderately negative charge (-13.1 mV), and compliance with the required limits for heavy metals and arsenic. These favorable technical attributes indicate promising prospects for its use as a pharmaceutical ingredient in the production of medicines and cosmetics.

Exploiting the interaction between halloysite and charged PNAs for their controlled release.

The design and development of nanomaterials that could be used in nanomedicine are of fundamental importance to obtain smart nanosystems for the treatment of several diseases. Halloysite, because of its interesting features, represents a suitable nanomaterial for the delivery of different biologically active species. Among them, peptide nucleic acids (PNAs) have attracted considerable attention in recent decades for their potential applications in both molecular antisense diagnosis and as therapeutic agents, although up to now, the actual clinical applications have been very limited. Herein we report a systematic study on the supramolecular interaction of three differently charged PNAs with halloysite. Understanding the interaction mode of charged molecules with the clay surfaces represents a key factor for the future design and development of halloysite based materials which could be used for the delivery and subsequent intracellular release of PNA molecules. Thus, three different PNA tetramers, chosen as models, were synthesized and loaded onto the clay. The obtained nanomaterials were characterized using spectroscopic studies and thermogravimetric analysis, and their morphologies were studied using high angle annular dark field transmission electron microscopy (HAADF/STEM) coupled with Energy Dispersive X-ray spectroscopy (EDX). The aqueous mobility of the three different nanomaterials was investigated by dynamic light scattering (DLS) and ζ-potential measurements. The release of PNA tetramers from the nanomaterials was investigated at two different pH values, mimicking physiological conditions. Finally, to better understand the stability of the synthesized PNAs and their interactions with HNTs, molecular modelling calculations were also performed. The obtained results showed that PNA tetramers interact in different ways with HNT surfaces according to their charge which influences their kinetic release in media mimicking physiological conditions.

Modification of halloysite lumen with dopamine derivatives as filler for antibiofilm coating.

HYPOTHESIS: Development of nanocomposite coating with antibiofilm properties is of fundamental importance to efficient fight biofilm formation preventing infections in biomedical area. In this context, halloysite nanotubes (HNTs), biocompatible and low-cost clay mineral, have been efficiently used as filler for different polymeric matrices affording several nanocomposites with appealing antimicrobial properties. The modification of HNTs surfaces represents a valuable strategy to improve the utilization of the clay for biological purposes. EXPERIMENTS: Herein, the covalent modification of the HNTs lumen with properly designed dopamine derivatives with different perfluoroalkyl chain length is reported. The obtained nanomaterials are thoroughly characterized by several techniques. As proof of concept the antibiofilm properties on E. coli strain of the nanomaterials are assayed as well. Finally, the HNTs fillers were introduced into a polydopamine matrix allowing for the preparation of functional coatings, resistant to formation of microbial biofilms. FINDINGS: All characterization methods proved the selectivity of the modification and the increased hydrophobicity of the lumen. In particular 27Al solid state nuclear magnetic resonance (NMR) spectra showed a upfield shift of the Al signal. Studies on the antibiofilm properties highlighted different activities according to the length of perfluoroalkyl chains of organic molecules as proved by 19F solid state NMR spectra. The synthetized materials were promising for future application as coatings on medical implants.

Antioxidant Efficacy and "In Vivo" Safety of a Bentonite/Vitamin C Hybrid.

L-ascorbic acid (LAA), commonly known as vitamin C, is an excellent and recognized antioxidant molecule used in pharmaceutical and cosmetic formulations. Several strategies have been developed in order to preserve its chemical stability, connected with its antioxidant power, but there is little research regarding the employment of natural clays as LAA host. A safe bentonite (Bent)-which was verified by in vivo ophthalmic irritability and acute dermal toxicity assays-was used as carrier of LAA. The supramolecular complex between LAA and clay may constitute an excellent alternative, since the molecule integrity does not seem to be affected, at least from the point of view of its antioxidant capacity. The Bent/LAA hybrid was prepared and characterized through ultraviolet (UV) spectroscopy, X-ray diffraction (XRD), infrared (IR) spectroscopy, thermogravimetric analysis (TG/DTG) and zeta potential measurements. Photostability and antioxidant capacity tests were also performed. The LAA incorporation into Bent clay was demonstrated, as well as the drug stability due to the Bent photoprotective effect onto the LAA molecule. Moreover, the antioxidant capacity of the drug in the Bent/LAA composite was confirmed.

Bentonite- and Palygorskite-Based Gels for Topical Drug Delivery Applications.

Bentonite or palygorskite-based hydrogels have recently been suggested as a strategy to increase bioavailability and control the retention and release of therapeutic candidates. In this work, clay-based hydrogels loaded with diclofenac acid nanocrystals have been successfully designed and developed. The aim was to improve diclofenac solubility, its dissolution rate and to enhance its local bioavailability after topical application. For this purpose, diclofenac acid nanocrystals were prepared by wet media milling technology and then loaded into inorganic hydrogels based on bentonite and/or palygorskite. Diclofenac acid nanocrystals were characterized by morphology, size, and zeta potential. Moreover, rheological behavior, morphology, solid state, release studies, and in vitro skin penetration/permeation of diclofenac acid nanocrystals-loaded hydrogels were performed. The hydrogels were characterized by a crystalline structure, and demonstrated that the inclusion of diclofenac in clay-based hydrogels resulted in an increased thermal stability. The presence of both palygorskite and bentonite reduced nanocrystal mobility, and consequently its release and penetration into the skin. On the other hand, bentonite- or palygorskite-based hydrogels revealed great potential as an alternative strategy to enhance topical bioavailability of DCF nanocrystals, enhancing their penetration to the deeper skin layers.

Design and development of polydioxanone scaffolds for skin tissue engineering manufactured via green process.

Fiber spinning technologies attracted a great interest since the beginning of the last century. Among these, electrospinning is a widely diffuse technique; however, it presents some drawbacks such as low fiber yield, high energy demand and the use of organic solvents. On the contrary, centrifugal spinning is a more sustainable method and allows to obtain fiber using centrifugal force and melted materials. The aim of the present work was the design and the development of polydioxanone (PDO) microfibers intended for tissue engineering, using centrifugal spinning. PDO, a bioresorbable polymer currently used for sutures, was selected as low melting polyester and DES (deep eutectic solvents), either choline chloride/citric acid (ChCl/CA) or betaine/citric acid (Bet/CA) 1:1 M ratio, were used to improve PDO spinnability. Physical mixtures of DES and PDO were prepared using different weight ratios. These were then poured into the spinneret and melted at 140 °C for 5 min. After the complete melting, the blends were spun for 1 min at 700 rpm. The fibers were characterized for physico chemical properties (morphology; dimensions; chemical structure; thermal behavior; mechanical properties). Moreover, the preclinical investigation was performed in vitro (biocompatibility, adhesion and proliferation of fibroblasts) and in vivo (murine burn/excisional model to assess safety and efficacy). The multidisciplinary approach allowed to obtain an extensive characterization to develop PDO based microfibers as medical device for implant to treat full thickness skin wounds.

Experimental and Computational Study for the Design of Sulfathiazole Dosage Form with Clay Mineral.

Sulfathiazole is an antimicrobial belonging to the family of sulfonamides, which were the first antibiotics to be discovered. Sulfathiazole is generally administered orally, and its main disadvantage is that it has low aqueous solubility, requiring high doses for its administration. This fact has led to side effects and the generation of bacterial resistance to the drug over time. The improvement of its solubility would mean not having to administer such high doses in its treatment. At the same time, montmorillonite is a natural, low-cost, non-toxic, biocompatible clay with a high adsorption capacity. It is potentially useful as a nanocarrier to design sulfathiazole dosage forms. In this work, the interaction between the drug and the clay mineral has been studied from an experimental and computational atomistic point of view to improve the drug's biopharmaceutical profile. The results showed the potential enhancement of the drug solubility due to the correct adsorption of the sulfathiazole in the clay interlayer space. As a result of the inclusion of sulfathiazole in the interlayer of the clay mineral, the solubility of the drug increased by 220% concerning the pristine drug. Experimentally, it was not possible to know the number of drug molecules adsorbed in the interlayer space or the external surface of the carrier. Theoretical studies will enable the knowledge of the stoichiometry of the drug/clay hybrids, with three molecules in the interlayer space being the most favorable process. The resultant basal spacing was in agreement with the experimental results.

Nutritional and Functional Properties of Novel Italian Spray-Dried Cricket Powder.

Insects, especially crickets, have been proposed as a novel source of nutrients in human nutrition since they possess bioactive molecules, including high protein content, lipids, chitin, vitamins and minerals. In this work, the nutritional and functional properties of a novel Italian spray-dried (SD) cricket powder were evaluated. The powder was characterized by physico-chemical properties (morphology, size distribution, solid state, thermal profiles, and surface zeta potential), and antioxidant properties. Moreover, preclinical properties (cytocompatibility and pro-inflammatory immune response) were assessed. The powder was characterized by microparticle structure with bulges and rough surfaces, showing distinctive antioxidant properties. The preclinical results suggested that the SD crickets were biocompatible towards Caco-2 and macrophages without immune response, representing an interesting material for the food industry that could provide health benefits in addition to the basic nutritional value of traditional foods.

Clay-Based Hydrogels as Drug Delivery Vehicles of Curcumin Nanocrystals for Topical Application.

The poor water solubility of a significant number of active pharmaceutical ingredients (API) remains one of the main challenges in the drug development process, causing low bioavailability and therapeutic failure of drug candidates. Curcumin is a well-known Biopharmaceutics Classification System (BCS) class IV drug, characterized by lipophilicity and low permeability, which hampers topical bioavailability. Given these premises, the aim of this work was the design and the development of curcumin nanocrystals and their incorporation into natural inorganic hydrogels for topical application. Curcumin nanocrystals were manufactured by the wet ball milling technique and then loaded in clay-based hydrogels. Bentonite and/or palygorskite were selected as the inorganic gelling agents. Curcumin nanocrystal-loaded hydrogels were manufactured by means of a homogenization process and characterized with respect to their chemico-physical properties, in vitro release, antioxidant activity and skin permeation. The results highlighted that the presence of bentonite provided an increase of curcumin skin penetration and simultaneously allowed its radical scavenging properties, due to the desirable rheological characteristics, which should guarantee the necessary contact time of the gel with the skin.

Exploring the cellular uptake of hectorite clay mineral and its drug carrier capabilities.

In the last years, the use of clay minerals for pharmaceutical purposes has increased due to their interesting properties. Hectorite (Ht) is a clay belonging to the smectite group which has attracted attention for applications in biology, tissue engineering and as drug carrier and delivery system. However, the mechanisms involved in Ht cellular uptake and transport into cells, are still unclear. Herein, we used a labeled Ht (Ht/1Cl) to study both the cellular uptake, by confocal laser scanning microscopy, and internalization pathways involved in the cellular uptake, by various endocytosis-inhibiting studies and fluorescence microscopy. These studies highlighted that Ht can penetrate the cellular membrane, localizing mainly in the cytoplasm. The main intracellular transport mechanisms are the ATP-dependent ones and those where filaments and microtubules are involved. Finally, as proof of concept for the potential of Ht as carrier system, we envisaged the covalent grafting of the anticancer molecule methotrexate (MTX), chosen as model, to obtain the Ht-MTX nanomaterial. The covalent linkage was confirmed by several techniques and the morphology of the obtained nanomaterial was imaged by SEM and TEM investigations. The kinetic release of the drug from the Ht-MTX nanomaterial in physiological conditions was studied as well. Furthermore, cytotoxic studies on different cell lines, namely, HL-60, HL-60R, MCF-7, 5637, UMUC3 and RT112 showed that Ht could be a promising material for anticancer therapy.

Smart nano-in-microparticles to tackle bacterial infections in skin tissue engineering.

Chronic wounds (resulting from underlying disease, metabolic disorders, infections, trauma, and even tumours) pose significant health problems. In this work, microparticles, based on polysaccharides (maltodextrin or dextran) and amino acids, and doped with antibacterial nanoparticles (CuO or ZnO NPs) are designed. Smart nano-in-microparticles with a hierarchical 3D structure are developed. The ultimate goal aims at an innovative platform to achieve skin repair and to manage skin colonization by avoiding infection that could delay and even impair the healing process. The microparticles are prepared by spray-drying and cross-linked by heating, to obtain insoluble scaffolds able to facilitate cell proliferation in the wound bed. The nano-in-microparticles are characterized using a multidisciplinary approach: chemico-physical properties (SEM, SEM-EDX, size distribution, swelling and degradation properties, structural characterization - FTIR, XRPD, SAXS - mechanical properties, surface zeta potential) and preclinical properties (in vitro biocompatibility and whole-blood clotting properties, release studies and antimicrobial properties, and in vivo safety and efficacy on murine burn/excisional wound model) were assessed. The hierarchical 3D nano-in microparticles demonstrate to promote skin tissue repair in a preclinical study, indicating that this platform deserves particular attention and further investigation will promote the prototypes translation to clinics.

Hybrid Lipid/Clay Carrier Systems Containing Annatto Oil for Topical Formulations.

Nanocomposites formed by clay and lipid carriers (NLCs) show a high potential for providing controlled release and specific delivery of bioactive molecules and have recently gained attention in the pharmaceutical sector due to their ability to transport hydrophilic and hydrophobic drugs. Recent studies have recognized the biological activity of the oil of Bixa orellana L. (AO) with regards to its healing, antioxidant, antibacterial, and anti-leishmanial properties. Therefore, the purpose of this study is the preparation and characterization of hybrid systems based on lipid nanocarriers and laponite for the delivery of AO. NLCs were prepared by the fusion-emulsification method, using cetyl palmitate (CP) or myristyl myristate (MM), AO, and Poloxamer 188. The morphology, hydrodynamic diameters, zeta potential (ZP), polydispersity index (PDI), thermal analysis, X-ray diffraction analysis (XRD), viscosity behavior, and cytotoxicity testing of the hybrid systems were performed. The thermal study and X-ray diffraction analyses (XRD) revealed polymorphic structural changes compatible with the amorphization of the material. Rheological assays highlighted a typical pseudoplastic behavior in all systems (MM and CP with LAP). The hybrid systems' morphology, size diameters, and PDIs were similar, preset spherical and monodisperse structures (≈200 nm; <0.3), without significant change up to sixty days. The ZP values differed from each other, becoming higher with increasing AO concentration. XEDS spectra and elemental X-ray maps show peaks of lipids (organic components, C and O) and inorganic components O, Mg, and Si. All samples showed cell viability above 60%. The results indicated a stable, biocompatible hybrid system that can be an alternative for topical application.

Maltodextrin-amino acids electrospun scaffolds cross-linked with Maillard-type reaction for skin tissue engineering.

The goal of this work is the design and the development of scaffolds based on maltodextrin (MD) to recover chronic lesions. MD was mixed with arginine/lysine/polylysine and the electrospinning was successfully used to prepare scaffolds with uniform and continuous nanofibers having regular shape and smooth surface. A thermal treatment was applied to obtain insoluble scaffolds in aqueous environment, taking the advantage of amino acids-polysaccharide conjugates formed via Maillard-type reaction. The morphological analysis showed that the scaffolds had nanofibrous structures, and that the cross-linking by heating did not significantly change the nanofibers' dimensions and did not alter the system stability. Moreover, the heating process caused a reduction of free amino group and proportionally increased scaffold cross-linking degree. The scaffolds were elastic and resistant to break, and possessed negative zeta potential in physiological fluids. These were characterized by direct antioxidant properties and Fe2+ chelation capability (indirect antioxidant properties). Moreover, the scaffolds were cytocompatible towards fibroblasts and monocytes-derived macrophages, and did not show any significant pro-inflammatory activity. Finally, those proved to accelerate the recovery of the burn/excisional wounds. Considering all the features, MD-poly/amino acids scaffolds could be considered as promising medical devices for the treatment of chronic wounds.

Nanocarrier based on halloysite and fluorescent probe for intracellular delivery of peptide nucleic acids.

The development of systems able to deliver genetic material into a target site is a challenge for modern medicine. Single-stranded peptide nucleic acids have attracted attention as promising therapeutic molecules for diagnostic and gene therapy. However, their poor cell membrane permeability represents a drawback for biomedical applications. Halloysite nanotubes (HNTs) are emerging materials in drug delivery applications both for their ability to penetrate cell membranes and for enhancing the solubility of drugs in biological media. Herein, we report the first example of the use of a nanocarrier based on halloysite labelled with fluorescent switchable halochromic oxazine molecules, to deliver a single-stranded peptide nucleic acids tetramer (PNAts) into living cells. The PNAts is covalently attached to halloysite (HNTs-PNA), whereas the fluorescent probe supramolecularly interacts with HNTs. The ability of the nanomaterial to bind complementary single-stranded DNA was assessed by resonance light scattering measurements. Finally, studies of cellular uptake were carried out by confocal laser scanning microscopy on normal and tumoral cell lines. This work highlights the usefulness of the covalent approach to generate HNTs-PNA nanomaterials for the potential targeting of future specific nucleic acids in living cells, which could open the doorway to novel possibilities for theranostic and gene therapy applications.

Prodrug based on halloysite delivery systems to improve the antitumor ability of methotrexate in leukemia cell lines.

The prodrug approach, as well as the development of specific systems able to deliver a chemotherapeutic agent in the target site, decreasing the side effects often associated with its administration, are still a challenging. In this context, both methotrexate drug molecules (MTX) and biotin ligand moieties, whose receptors are overexpressed on the surface of several cancer cells, were loaded on halloysite nanotubes (HNTs) to develop nanomaterial based on multifunctional and "smart" delivery systems. To highlight the crucial role played by biotin, carrier systems based on HNTs and MTX were also synthetized. In detail, several approaches were envisaged: i) a supramolecular interaction between the clay and the drug; ii) a covalent grafting of the drug onto the HNTs external surface and, iii) a combination of both approaches. The nanomaterials obtained were characterized by thermogravimetric analysis, FT-IR, and UV-vis spectroscopies, DLS and ζ-potential measurements and the morphologies were imaged by HAADF/STEM investigations. Kinetic release experiments at different pH conditions were also performed. Finally, as a proof-of-concept application of our pro-drug delivery systems based on HNTs in cancer therapy, the cytotoxic effects were evaluated on acute myeloid leukemia cell lines, HL60 and its multidrug resistance variant, HL60R. The obtained results showed that both the MTX prodrug system and the biotinylated ones played a crucial role in the biological activity and, they are promising agents for the cancer treatments.