Liposomes as selenium nanocarriers for foliar application to wheat plants: A biofortification strategy.

In the present work, liposomes have been used as nanocarriers in the biofortification of wheat plants with selenium (Se) through foliar application. Liposomal formulations were prepared using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and Phospholipon®90H (P90H) (average size <100 nm), loaded with different concentrations of inorganic Se (selenite and selenate) and applied twice to the plants in the stage of vegetative growth. Liposomes enhanced Se uptake by wheat plants compared to direct application. The highest Se enrichment was achieved using the phospholipid DPPC and a concentration of 1000 µmol·L-1 of Se without affecting the biomass, chlorophylls, carotenoids, and the concentration of mineral nutrients of the plants. The chemical speciation of Se in the plants was further investigated by X-ray absorption spectroscopy (XAS). The results from XAS spectra revealed that most of the inorganic Se was transformed to organic Se and that the use of liposomes influenced the proportion of C-Se-C over C-Se-Se-C species.

Phytochemical Profile, Bioactive Properties, and Se Speciation of Se-Biofortified Red Radish (Raphanus sativus), Green Pea (Pisum sativum), and Alfalfa (Medicago sativa) Microgreens.

The impact of selenium (Se) enrichment on bioactive compounds and sugars and Se speciation was assessed on different microgreens (green pea, red radish, and alfalfa). Sodium selenite and sodium selenate at a total concentration of 20 µM (1:1) lead to a noticeable Se biofortification (40-90 mg Se kg-1 DW). In green pea and alfalfa, Se did not negatively impact phenolics and antioxidant capacity, while in red radish, a significant decrease was found. Regarding photosynthetic parameters, Se notably increased the level of chlorophylls and carotenoids in green pea, decreased chlorophyll levels in alfalfa, and had no effect on red radish. Se treatment significantly increased sugar levels in green pea and alfalfa but not in red radish. Red radish had the highest Se amino acid content (59%), followed by alfalfa (34%) and green pea (28%). These findings suggest that Se-biofortified microgreens have the potential as functional foods to improve Se intake in humans.

Selenium biofortification of microgreens: Influence on phytochemicals, pigments and nutrients.

Kale (Brassica oleracea L. var. sabellica L.), kohlrabi (Brassica oleracea L. var. gongylodes L.) and wheat (Triticum aestivum L. cv. Bancal) microgreens were cultivated in presence of selenium 20 µmol L-1 as sodium selenite and sodium selenate mixture. The influence of this biofortification process was evaluated in terms of biomass production, total Se, macro- and micronutrients concentration, polyphenols, antioxidant activity, chlorophylls and carotenoids levels and total soluble proteins content. The results obtained have shown a significant concentration of total Se in the biofortified microgreens of kale (133 µg Se·g-1 DW) and kohlrabi (127 µg Se·g-1 DW) higher than that obtained for wheat (28 µg Se·g-1 DW). The Se uptake in all the species did not produce oxidative damage to the plants reflected in the bioactive compounds, antioxidant capacity or pigments concentration. These Se-enriched microgreens may contribute to the recommended intake of this nutrient in human diet as to overcome Se-deficiency.

Efficient controlled release of cannabinoids loaded in γ-CD-MOFs and DPPC liposomes as novel delivery systems in oral health.

Olivetol (OLV), as a cannabidiol (CBD) analog, was incorporated in γ-cyclodextrin metal-organic frameworks (γ-CD-MOFs) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) liposomes as potential analgesic drug delivery systems (DDS) for dental hypersensitivity (DH) treatment. These DDS have been scarcely employed in oral health, being the first time in case of MOFs loaded with cannabinoids. In vitro experiments using bovine teeth were performed to verify if the drug is able to reach the dentin, where it can flow to the pulp tissues and exert its analgesic effect; enamel and dentin regions were analyzed by synchrotron radiation-based FTIR microspectroscopy. Principal component analysis (PCA) was used to process the spectroscopic data as a powerful chemometric tool, and it revealed a similar behavior in both regions. The studied DDS have been characterized by different techniques, and is was demonstrated that DDS is an efficient way to carry the drug through dental tissues without compromising their structure.

The elimination of trachoma as a public health problem in Mexico: From national health priority to national success story.

INTRODUCTION: Mexico was the first country in the Americas and the third in the world to eliminate trachoma as a public health problem, as validated by the WHO in 2017. OBJECTIVE: To describe the critical elements that favored the elimination of trachoma as a public health problem in Mexico and the public health impact of this success. METHODOLOGY: A revision and compilation of data and information contained in the dossier presented by the country to PAHO/WHO to obtain the validation of trachoma elimination as a public health problem was conducted by a group of delegates from the national and local trachoma prevention and control program. Data from the national and local surveillance systems and reports of actions conducted after achieving the elimination goal were also included. Critical elements that favored the achievement of the elimination goal from 1896 to 2019 were extracted. RESULTS: Mexico reached the elimination of trachoma in 2016 obtaining the validation in 2017. 264 communities were no longer endemic and 151,744 people were no longer at risk of visual impairment or possible blindness due to trachoma. The key to the success of this elimination process was primarily the local leadership of health authorities with sustained funding for brigades, increased access to potable water and sanitation, and key alliances with indigenous authorities, health authorities, and government institutions that contributed to the achievement of the goal. The SAFE strategy started implementation in Mexico in 2004 as a comprehensive package of interventions. SAFE stands for surgery, antibiotics, facial cleanliness, and improvement of the environmental conditions. These actions impacted drastically on the number of new cases trachmatous trichiasis (TT) and trachomatous inflammation-follicular (TF), which decreased from 1,794 in 2004 to zero in 2016. CONCLUSIONS: The elimination of trachoma as a public health problem in Mexico is a true success story that may serve as a model example for the elimination of other neglected infectious diseases in the Americas.

Making EHRs Trustable: A Quality Analysis of EHR-Derived Datasets for COVID-19 Research.

One approach to verifying the quality of research data obtained from EHRs is auditing how complete and correct the data are in comparison with those collected by manual and controlled methods. This study analyzed data quality of an EHR-derived dataset for COVID-19 research, obtained during the pandemic at Hospital Universitario 12 de Octubre. Data were extracted from EHRs and a manually collected research database, and then transformed into the ISARIC-WHO COVID-19 CRF model. Subsequently, a data analysis was performed, comparing both sources through this convergence model. More concepts and records were obtained from EHRs, and PPV (95% CI) was above 85% in most sections. In future studies, a more detailed analysis of data quality will be carried out.

Combination of Two Synchrotron Radiation-Based Techniques and Chemometrics to Study an Enhanced Natural Remineralization of Enamel.

The limitations to assess dental enamel remineralization have been overcome by a methodology resulting from the appropriate combination of synchrotron radiation-based techniques on both, infrared microspectroscopy and micro X-ray diffraction, with the help of specific data mining. Since amelogenin plays a key role in modulating the mineralization of tooth enamel, we propose a controlled ion release for fluorapatite structural ions (Ca2+, PO43-, and F-, also including Zn2+) by using weak acid and weak base ion-exchange resins in the presence of amelogenin to remineralize the surface of etched teeth. This combination provides the necessary ions for enamel remineralization and a guide for crystal growth due to the protein. Remineralized tooth samples were analyzed by applying the indicated methodology. The synchrotron data were treated using principal component analysis and multivariate curve resolution to analyze the mineral layer formed in the presence and absence of amelogenin. The remineralizing treatment created a fluorapatite layer free of carbonate impurities and with a similar orientation to that of the natural enamel thanks to amelogenin contribution.

Tooth whitening effects on dental enamel, oxidation or reduction? Comparison of physicochemical alterations in bovine enamel using Synchrotron-based Micro-FTIR.

OBJECTIVES: To compare the side effects of typical whitening treatments (by means of oxidation) compared to the new treatment developed by the authors through reduction. The aim is to provide information about the chemical interactions of the encapsulated reductant agent (metabisulfite, MBS) with the enamel structure compared with carbamide peroxide (CP) and to study their penetration in the hydroxyapatite (HAP) and the changes produced in the mineral and its hardness. METHODS: Chemical imaging is performed by synchrotron-based micro Fourier transformed infrared spectroscopy (SR-µFTIR). Continuous Stiffness Measurements (CSM) were used to determine the depth reached by the treatments in order to delimitate the area of study. RESULTS: The SR-µFTIR studies showed that MBS treatments softened the first 10 µm of enamel, as happens in the initial stages of tooth decay. Principal component analysis (PCA) showed that the main differences between treatments were found in the intensity of the ν3 PO43- peak related to tooth demineralization. CP and MBS promoted different changes in the HAP mineral, observed as opposite shifts of the peak: CP shortened the P-O bond while MBS seemed to elongate it. Moreover, MBS promoted the loss of carbonates while CP did not, which is probably related to the solution's pH. When comparing MBS and MBS Liposomes, it was observed how liposomes favoured the diffusion of MBS to inner layers, since the effects of MBS were observed in deeper enamel. Thus, the encapsulated MBS whitening effect is highly improved in terms of time when compared to MBS alone or CP. SIGNIFICANCE: The obtained results indicated that using oxidizing (CP) or reducing (MBS) treatments, promote different HAP mineral changes, and that liposomes favour the diffusion of MBS into the enamel. It is the first time that synchrotron light is used to map the bovine incisor's enamel chemically, and to determine the effect of a whitening treatment in terms of chemical HAP modifications, and the extent in deep of these effects.

The power of weak ion-exchange resins assisted by amelogenin for natural remineralization of dental enamel: an in vitro study.

This study aims to develop an innovative dental product to remineralize dental enamel by a proper combination of ion-exchange resins as controlled release of mineral ions that form dental enamel, in the presence of amelogenin to guide the appropriate crystal growth. The novel product proposed consists of a combination of ion-exchange resins (weak acid and weak base) individually loaded with the remineralizing ions: Ca2+, PO43- and F-, also including Zn2+ in a minor amount as antibacterial, together with the protein amelogenin. Such cocktail provides onsite controlled release of the ions necessary for enamel remineralization due to the weak character of the resins and at the same time, a guiding tool for related crystal growth by the indicated protein. Amelogenin protein is involved in the structural development of natural enamel and takes a key role in controlling the crystal growth morphology and alignment at the enamel surface. Bovine teeth were treated by applying the resins and protein together with artificial saliva. Treated teeth were evaluated with nanoindentation, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The innovative material induces the dental remineralization creating a fluorapatite layer with a hardness equivalent to sound enamel, with the appropriate alignment of corresponding nanocrystals, being the fluorapatite more acid resistant than the original mineral. Our results suggest that the new product shows potential for promoting long-term remineralization leading to the inhibition of caries and protection of dental structures.

Flash tooth whitening: A friendly formulation based on a nanoencapsulated reductant.

Tooth whitening materials have not undergone relevant advances in the last years. Current materials base their action on the oxidant activity of peroxides, which present the disadvantage of requiring long application times, along with unpleasant side effects of dental hypersensitivity (e.g. sharp pain). In this work, a novel tooth whitening formulation based on the encapsulation of a reducing agent (sodium metabisulfite) in liposomes is developed. An experimental design was applied to optimize the formulation in terms of whitening action and safety, using bovine teeth as in vitro model. Results were obtained by colorimetry, profilometry and nanoindentation techniques. The comparison with standard whitening treatments showed a similar whitening action of the optimized formulation but in remarkable shorter application times. Moreover, teeth roughness values obtained with the presented formulation conformed with ISO 28399. As mechanism of action, results obtained from fluorescent confocal microscopy showed the liposomal formulation to form a layer surrounding the enamel surface, enhancing the treatment efficacy in terms of diffusion of the protected reductant towards the enamel. The better efficiency of this formulation encourages its use as an alternative to current oxidative treatments.

Heavy metal availability assessment using portable X-ray fluorescence and single extraction procedures on former vineyard polluted soils.

The periodic application of copper-based fungicides (Bourdeaux mixture) to vineyards of the Mediterranean region has generated an important pollution source that in some cases requires a quick intervention due to the high bioavailable copper content measured. Despite some vineyards were abandoned 40 years ago, noticeable amounts of Cu and other man-related metals are still nowadays detected in soils. In the present work, the development of a mobility test for the available heavy metal (Cu, Pb, Zn and As) content in soil has been performed using portable X-ray fluorescence (FP-XRF) combined with single leaching test, and was applied to a calcareous soil of a former vineyard area in Catalonia (NE Spain). The combined methodology has provided useful information for fast and detailed risk assessment, in terms of mobility and bioavailability of metals. The anthropogenic contribution was evaluated by means of the Concentration Enrichment Ratios (CER) in soil. The results reflect a clear anthropogenic contribution for Cu, a partial anthropogenic contribution for Pb proceeding from an external pollution source, and a non-significant external contribution for As and Zn. The topsoil concentration ranges for Cu (70-128 mg kg-1) were found to be above the background level and several samples above the regional governmental limits (Generic Reference Levels or GRL values) for soil ecosystem protection and for human health (90 mg kg-1). The present study reveals that the use of FP-XRF equipment constitute a highly valid option for quick decision making during the field location, characterization and quantitative elemental analysis of soil samples for screening of potential pollutants such as heavy metals.

Breaking the rules: tooth whitening by means of a reducing agent.

OBJECTIVES: It is widely accepted that current tooth whitening treatment effect is based on the oxidizing action of peroxides, even if the mechanism of action remains still unclear. Treatments are claimed to be safe, but several secondary effects have been described, since long application times and high concentrations are needed. A faster whitening ingredient which permits the use of lower concentrations and shorter application times could potentially overcome this problem. In this work, a different approach based on a reducing agent, sodium metabisulfite (MBS), is explored. MATERIALS AND METHODS: The reaction between tannic acid (TA) with carbamide peroxide (CP), MBS, and potassium persulfate (PS), as an oxidizing agent, was monitored for 48 hours by measuring its absorbance, comparing their different whitening effects. The reduction process between TA and MBS was confirmed by cyclic voltammetry. An in vitro test was used to observe if MBS whitens also stained teeth. RESULTS: It is shown that MBS bleaching effect is faster and higher than CP's effect over time. PS produced a darkening effect after the 3rd hour because of the strong absorbance of the oxidation metabolite. Cyclic voltammetry showed a progressive increase in the intensity of the TA anodic peak when MBS was present, demonstrating that a reduction is taking place. In vitro, MBS showed a faster whitening performance than CP, using lower concentrations. CONCLUSIONS: Using a TA solution as a staining model, it was possible to show that MBS has a visible bleaching effect through a reduction reaction, faster than CP, both in solution and in vitro. Low concentrations of MBS are effective in whitening. CLINICAL SIGNIFICANCE: This work shows MBS as a promising candidate to develop novel whitening treatments, which is acting by reducing mechanism instead of oxidation.

Tooth whitening: From the established treatments to novel approaches to prevent side effects.

OBJECTIVE: The aim is to review the most important aspects about tooth whitening treatments, their side effects, and the new emerging approaches to overcome them. OVERVIEW: This review is focused on origin of tooth stains, the whitening systems and their chemistry, their side effects, and the new approaches. The search of bibliography of the period 1965-2018 has been analyzed. CONCLUSIONS: Tooth whitening has become one of the most requested dental treatments by the public. Tooth stains are classified according to their origin into two categories: intrinsic and extrinsic. The whitening systems are generally organized into two classes: in-office and at-home products. Most of the whitening systems use hydrogen peroxide as the active oxidative agent to degrade the organic compounds that cause stains. The concentration ranges depending on the treatment, and it may be applied directly or produced in a chemical reaction from carbamide peroxide that is more stable. Besides its popularity, tooth whitening still has some side effects being tooth hypersensitivity the most common. In order to decrease these side effects, new treatments are constantly in renewal processes. CLINICAL SIGNIFICANCE: Despite all the data and new strategies known about tooth whitening, there are many aspects that are not totally fully understood and methodologies that are not completely effective. Therefore, the development of effective, efficient, and long-lasting whitening treatments is still necessary.

Residues of pesticides and some metabolites in dissolved and particulate phase in surface stream water of Cachapoal River basin, central Chile.

In the last twenty years, pesticide use in Chile has increased more than 160%, generating a greater risk of water resources pollution. The objective of this study was to assess the presence of 22 pesticides and 12 degradation products in surface water samples from the Cachapoal River basin, Central Chile, an area characterized by intense agricultural activity. Pesticide concentrations in the dissolved phase (DP) and particulate phase (PP) in samples collected in the dry season and after precipitation events was assessed. The solid-phase extraction technique was used to preconcentrate the samples and GC/MS and LC/MS were used to detect pesticides. The results present spatio-temporal variations in the proportion and concentration of pesticides and their degradation products in both the DP and PP for each site and sampling period. The most ubiquitous compounds in the dissolved phase were atrazine, atrazine-2-hydroxy (HA), cyprodinil, pyrimethanil, and tebuconazole, while in the particulate phase HA, imidacloprid, diazinon and pyrimidinol were detected. The results presented in this study make up the first record of pesticides in the dissolved and particulate phases in surface water in Chile. They show that the problem of pesticide contamination undoubtedly affects the quality of bodies of water in agricultural areas in Chile and support the need for a proper assessment of the water quality of the Cachapoal River in the future.

Molecularly imprinted polymer for the removal of diclofenac from water: Synthesis and characterization.

Contaminants of Emerging Concerns (CECs) have been introduced as one type of recalcitrant pollutant sources in water. In this study, the non-steroidal anti-inflammatory drug diclofenac (DCF) has been removed from water solutions using Molecularly Imprinted Polymer (MIP), synthetized via bulk polymerization with allylthiourea (AT) as the functional monomer and using DCF as template (MIP-DCF). DCF detection has been performed by UV spectrophotometer. From the kinetic study in batch mode, approximately 100% of removal is observed by using 10mg of MIP-DCF, with an initial concentration of 5mg/L of DCF at pH7, within 3min and agitated at 25°C. In continuous flow mode study, using a cartridge pre-packed with 10mg of MIP-DCF, a high adsorption capacity of 160mgDCF/g MIP was obtained. To study the porosity of MIPs, scanning electron microscopy (SEM) has been used. In order to characterize the chemical interaction between monomer and template, the pre-polymerization mixture for MIP and DCF has also been studied by 1H NMR. One of the chemical shift observed has been related to the formation of a complex between amine protons of thiourea group of AT with carboxylic acid on DCF. In conclusion, the developed MIP works as a good adsorbent for DCF removal, and is selective to DCF in the presence of indomethacin and ibuprofen.

Effect of different rates of spent mushroom substrate on the dissipation and bioavailability of cymoxanil and tebuconazole in an agricultural soil.

Physicochemical methods to immobilize pesticides in vulnerable soils are currently being developed to prevent water contamination. Some of these methods include the use of different organic residues to modify soils because they could limit the transport of pesticides and/or facilitate their dissipation. Spent mushroom substrate (SMS) may be used for these purposes. Accordingly a study was conducted under laboratory conditions to know the dissipation and bioavailability of the fungicides cymoxanil and tebuconazole over time in a vineyard soil amended with two rates of spent mushroom substrate (SMS) (5% and 50% (w/w)), selected to prevent the diffuse or point pollution of soil. The dissipation of cymoxanil was more rapid than that of tebuconazole in the different soils studied. The dissipation rate was higher in the amended soil than in the unamended one for both compounds, while no significant differences were observed between the amended soils in either case. An apparent dissipation occurred in the amended soil due to the formation of non-extractable residues. Bound residues increased with incubation time for tebuconazole, although a proportion of this fungicide was bioavailable after 303days. The major proportion of cymoxanil was tightly bound to the amended soil from the start, although an increasing fraction of bound fungicide was bioavailable for mineralization. Soil dehydrogenase activity was significantly affected by SMS application and incubation time; however, it was not significantly modified by fungicide application. The significance of this research suggests that SMS applied at a low or high rate to agricultural soil can be used to prevent both the diffuse or point pollution of soil through the formation of non-extractable residues, although more research is needed to discover the time that fungicides remain adsorbed into the soil decreasing either bioavailability (tebuconazole) or mineralization (cymoxanil) in SMS-amended soils.

Application of mesotrione at different doses in an amended soil: Dissipation and effect on the soil microbial biomass and activity.

The aim of this work was to estimate the dissipation of mesotrione applied at three doses (2, 10 and 50 mg kg(-1) dw) in an unamended agricultural soil, and this same soil amended with two organic residues (green compost (C) and sewage sludge (SS)). The effects of herbicide and organic residue on the abundance and activity of soil microbial communities were also assessed by determining soil microbial parameters such as biomass, dehydrogenase activity (DHA), and respiration. Lower dissipation rates were observed for a higher herbicide dose. The highest half-life (DT50) values were observed in the SS-amended soil for the three herbicide doses applied. Biomass values increased in the amended soils compared to the unamended one in all the cases studied, and increased over the incubation period in the SS-amended soil. DHA mean values significantly decreased in the SS-amended soil, and increased in the C-amended soil compared to the unamended ones, under all conditions. At time 0 days, respiration values were significantly higher in SS-amended soils (untreated and treated with mesotrione) than in the unamended and C-amended soils. The effect of mesotrione on soil biomass, DHA and respiration was different depending on incubation time and soil amendment and herbicide dose applied. The results support the need to consider the possible non-target effects of pesticides and organic amendments simultaneously applied on soil microbial communities to prevent negative impacts on soil quality.

Modeling fungicides mobility in undisturbed vineyard soil cores unamended and amended with spent mushroom substrates.

The performance of the pesticide fate model PRZM to predict the fate of two fungicides, penconazole and metalaxyl, and the major metabolite of metalaxyl (CGA-62826), in amended and unamended vineyard soils was tested from undisturbed soils columns experiments. Three different treatments were tested in two soils: control soil (unamended), and soil amended with fresh or composted spent mushroom substrates, which correspond to common agricultural practices in Spain. Leaching experiments were performed under non-saturated flow conditions. The model was parameterized with laboratory and literature data, and using pedotransfer functions. It was first calibrated for water flow against chloride breakthrough curves. The key parameter was the hydrodynamic dispersion coefficient (DISP). No leaching of penconazole, the most hydrophobic fungicide, was observed. It remained in the top 0-8 cm of the column. In any case, simulations were highly correlated to the experimental results. On the contrary, metalaxyl and its metabolite were consistently found in the leachates. A calibration step of the Kd of metalaxyl and CGA-62826 and of DISP for CGA-62826 was necessary to obtain good prediction of the leaching of both compounds. PRZM generally simulated acceptable metalaxyl vertical distribution in the soil profiles although results were overestimated for its metabolite. Nevertheless, PRZM can be reasonably used to assess the leaching (through breakthrough curves) and vertical distribution of fungicides in amended soils, knowing their DISP values.

Nanoparticles in magnetic resonance imaging: from simple to dual contrast agents.

Magnetic resonance imaging (MRI) has become one of the most widely used and powerful tools for noninvasive clinical diagnosis owing to its high degree of soft tissue contrast, spatial resolution, and depth of penetration. MRI signal intensity is related to the relaxation times (T 1, spin-lattice relaxation and T 2, spin-spin relaxation) of in vivo water protons. To increase contrast, various inorganic nanoparticles and complexes (the so-called contrast agents) are administered prior to the scanning. Shortening T 1 and T 2 increases the corresponding relaxation rates, 1/T 1 and 1/T 2, producing hyperintense and hypointense signals respectively in shorter times. Moreover, the signal-to-noise ratio can be improved with the acquisition of a large number of measurements. The contrast agents used are generally based on either iron oxide nanoparticles or ferrites, providing negative contrast in T 2-weighted images; or complexes of lanthanide metals (mostly containing gadolinium ions), providing positive contrast in T 1-weighted images. Recently, lanthanide complexes have been immobilized in nanostructured materials in order to develop a new class of contrast agents with functions including blood-pool and organ (or tumor) targeting. Meanwhile, to overcome the limitations of individual imaging modalities, multimodal imaging techniques have been developed. An important challenge is to design all-in-one contrast agents that can be detected by multimodal techniques. Magnetoliposomes are efficient multimodal contrast agents. They can simultaneously bear both kinds of contrast and can, furthermore, incorporate targeting ligands and chains of polyethylene glycol to enhance the accumulation of nanoparticles at the site of interest and the bioavailability, respectively. Here, we review the most important characteristics of the nanoparticles or complexes used as MRI contrast agents.

Improved conformational stability of the visual G protein-coupled receptor rhodopsin by specific interaction with docosahexaenoic acid phospholipid.

Rhodopsin is the photoreceptor located in the rod cells of the retina. It has seven transmembrane helices and is a prototypic member of the G protein-coupled receptor superfamily. The structures and functions of these receptors are clearly affected by the lipid composition of the cell membrane, and their study in a purified recombinant form is usually performed in detergent solution. There is a need to study these receptors in a physiologically relevant environment because the lipid environment is known to have an important effect on their function. In this work, rhodopsin reconstituted in docosahexaenoic acid (DHA) liposomes is shown to have more thermal stability than when it is solubilised with the neutral detergent dodecyl maltoside. Moreover, the specific interaction between rhodopsin and DHA was followed by means of Langmuir experiments with insertion of rhodopsin into lipid monolayers; this showed high affinity for the lipid-receptor interaction. Furthermore, fluorescence spectroscopy measurements indicate that the conformation of opsin obtained after photobleaching is preserved in DHA-containing liposomes, thereby allowing retinal to re-enter the binding pocket even long after bleaching. Overall, our results demonstrate that liposomes of this specific lipid provide a more stable environment for ground-state inactive rhodopsin in the dark, than dodecyl maltoside detergent, and that this lipid can also preserve the native correctly folded ligand-free opsin conformation obtained after illumination. This strategy will be used in further studies on mutations of rhodopsin associated with congenital retinopathies.