A high birefringence liquid crystal for lenses with large aperture.

This work presents the application of an experimental nematic liquid crystal (LC) mixture (1929) in a large aperture lens. The LC material is composed of terphenyl and biphenyl derivatives compounds with an isothiocyanate terminal group and fluorinated lateral substituents. The substitution with a strongly polar isothiocyanate group and an aromatic rigid core provides [Formula: see text]-electron coupling, providing high birefringence ([Formula: see text] at 636 nm and 23 °C) and low viscosity ([Formula: see text] = 17.03 mPa s). In addition, it also shows high values of birefringence at near infrared (0.318 at 1550 nm). The synthesis process is simple when comparing materials with high melting temperatures. The excellent properties of this LC mixture are demonstrated in a large aperture LC-tunable lens based on a transmission electrode structure. Thanks to the particular characteristics of this mixture, the optical power is high. The high birefringence makes this LC of specific interest for lenses and optical phase modulators and devices, both in the visible and infrared regions.

Aspherical liquid crystal lenses based on a variable transmission electrode.

In this work, a technique to generate aspherical liquid crystal lenses with positive and negative optical power is experimentally demonstrated. The main enabling element is a micro-metric electrode with variable spatial size. This produces a decreasing resistance towards the lens centre that generates the desired voltage/phase profiles. Then, the voltage is homogeneously distributed across the active area of the lens by micro-metric concentric electrodes. As it is demonstrated, the phase shift can be controlled with voltages from 0 to 4.5 VRMS. As a result, parabolic profiles are obtained both for negative and positive optical powers. Furthermore, this approach avoids some disadvantages of previous techniques; parabolic profiles can be obtained with only one lithographic step and one or two voltage sources. Other complex aspherical profiles could be fabricated using the same technique, such as elliptical or hyperbolic ones.

Analogue of electromagnetically induced transparency in square slotted silicon metasurfaces supporting bound states in the continuum.

In this work, a silicon metasurface designed to support electromagnetically induced transparency (EIT) based on quasi-bound states in the continuum (qBIC) is proposed and theoretically demonstrated in the near-infrared spectrum. The metasurface consists of a periodic array of square slot rings etched in a silicon layer. The interruption of the slot rings by a silicon bridge breaks the symmetry of the structure producing qBIC stemming from symmetry-protected states, as rigorously demonstrated by a group theory analysis. One of the qBIC is found to behave as a resonance-trapped mode in the perturbed metasurface, which obtains very high quality factor values at certain dimensions of the silicon bridge. Thanks to the interaction of the sharp qBIC resonances with a broadband bright background mode, sharp high-transmittance peaks are observed within a low-transmittance spectral window, thus producing a photonic analogue of EIT. Moreover, the resonator possesses a simple bulk geometry with channels that facilitate the use in biosensing. The sensitivity of the resonant qBIC on the refractive index of the surrounding material is calculated in the context of refractometric sensing. The sharp EIT-effect of the proposed metasurface, along with the associated strong energy confinement may find direct use in emerging applications based on strong light-matter interactions, such as non-linear devices, lasing, biological sensors, optical trapping, and optical communications.

Strongly resonant silicon slot metasurfaces with symmetry-protected bound states in the continuum.

In this work, a novel all-dielectric metasurface made of arrayed circular slots etched in a silicon layer is proposed and theoretically investigated. The structure is designed to support both Mie-type multipolar resonances and symmetry-protected bound states in the continuum (BIC). Specifically, the metasurface consists of interrupted circular slots, following the paradigm of complementary split-ring resonators. This configuration allows both silicon-on-glass and free-standing metasurfaces and the arc length of the split-rings provides an extra tuning parameter. The nature of both BIC and non-BIC resonances supported by the metasurface is investigated by employing the Cartesian multipole decomposition technique. Thanks to the non-radiating nature of the quasi-BIC resonance, extremely high Q-factor responses are calculated, both by fitting the simulated transmittance spectra to an extended Fano model and by an eigenfrequency analysis. Furthermore, the effect of optical losses in silicon on quenching the achievable Q-factor values is discussed. The metasurface features a simple bulk geometry and sub-wavelength dimensions. This novel device, its high Q-factors, and strong energy confinement open new avenues of research on light-matter interactions in view of new applications in non-linear devices, biological sensors, and optical communications.

Multifunctional light beam control device by stimuli-responsive liquid crystal micro-grating structures.

There is an increasing need to control light phase with tailored precision via simple means in both fundamental science and industry. One of the best candidates to achieve this goal are electro-optical materials. In this work, a novel technique to modulate the spatial phase profile of a propagating light beam by means of liquid crystals (LC), electro-optically addressed by indium-tin oxide (ITO) grating microstructures, is proposed and experimentally demonstrated. A planar LC cell is assembled between two perpendicularly placed ITO gratings based on microstructured electrodes. By properly selecting only four voltage sources, we modulate the LC-induced phase profile such that non-diffractive Bessel beams, laser stretching, beam steering, and 2D tunable diffraction gratings are generated. In such a way, the proposed LC-tunable component performs as an all-in-one device with unprecedented characteristics and multiple functionalities. The operation voltages are very low and the aperture is large. Moreover, the device operates with a very simple voltage control scheme and it is lightweight and compact. Apart from the demonstrated functionalities, the proposed technique could open further venues of research in optical phase spatial modulation formats based on electro-optical materials.

Positive-negative tunable liquid crystal lenses based on a microstructured transmission line.

In this work, a novel technique to create positive-negative tunable liquid crystal lenses is proposed and experimentally demonstrated. This structure is based on two main elements, a transmission line acting as a voltage divider and concentric electrodes that distribute the voltage homogeneously across the active area. This proposal avoids all disadvantages of previous techniques, involving much simpler fabrication process (a single lithographic step) and voltage control (one or two sources). In addition, low voltage signals are required. Lenses with switchable positive and negative focal lengths and a simple, low voltage control are demonstrated. Moreover, by using this technique other optical devices could be engineered, e.g. axicons, Powell lenses, cylindrical lenses, Fresnel lenses, beam steerers, optical vortex generators, etc. For this reason, the proposed technique could open new venues of research in optical phase modulation based on liquid crystal materials.

Ultrahigh-quality factor resonant dielectric metasurfaces based on hollow nanocuboids.

In this work, a dielectric metasurface consisting of hollow dielectric nanocuboids, with ultrahigh quality factor, is theoretically proposed and demonstrated. The variation of the hole size of the cuboid allows for the tuning of the resonant anapole mode in the nanoparticles. The metasurface is designed to operate in two complementary modes, namely electromagnetically induced transparency and narrowband selective reflection. Thanks to the non-radiative nature of the anapole resonances, the minimal absorption losses of the dielectric materials, and the near-field coupling among the metasurface nanoparticles, a very high quality factor of Q=2.5×106 is achieved. The resonators are characterized by a simple bulk geometry and the subwavelength dimensions of the metasurface permit operation in the non-diffractive regime. The high quality factors and strong energy confinement of the proposed devices open new avenues of research on light-matter interactions, which may find direct applications, e.g., in non-linear devices, biological sensors, laser cavities, and optical communications.

Tunable liquid crystal cylindrical micro-optical array for aberration compensation.

A tunable aberration compensation device for rectangular micro-optical systems is proposed and demonstrated. This device, which is based in nematic liquid crystal and a micro-electrode structure, forms gradients in the index of refraction as a function of voltage. We have developed a fringe skeletonizing application in order to extract the 3D wavefront from an interference pattern. This software tool obtains the optical aberrations using Chebyshev polynomials. By using phase shifted electrical signals the aberrations can be controlled independently. A complete independent control over the spherical and coma aberration has been demonstrated. Also, an independent control over the astigmatism aberration has been demonstrated in a broad range. This device has promising applications where aberration compensation is required. The independent compensation achieved for some coefficients, such as astigmatism for example, is more than 2.4 waves.

Note: Electrical modeling and characterization of voltage gradient in liquid crystal microlenses.

In this work, a novel equivalent electric circuit for modeling liquid crystal microlenses is proposed. This model is focused on explaining a lens behavior at the micrometric scale, using its manufacturing parameters. It suggests an approach to predict the solution of the voltage gradient distribution across a microlens. An interesting feature of the model is that it provides an analytical solution for microlenses with modal and hole-patterned electrode schemes, by a simple software tool. The model flexibility allows lens designers to apply complex waveform signals with different harmonics. The voltage distribution has been tested. The simulated and measured voltage profiles are fairly in agreement.

Note: tunable notch filter based on liquid crystal technology for microwave applications.

In this work, a compact design of an electrically tunable notch filter, based on liquid crystal (LC) technology, has been designed, manufactured, and characterized. The proposal has been achieved through particular configuration schemes with low cost inverted-microstrip structures and conventional spurlines structures due to its ease of integration. Central frequency tunability has been induced by applying low ac voltages, thus involving low power consumption. For these devices, filter responses have been approached specifically at microwave C-band frequency allocated for many satellite communications applications. Also, it has taken advantage of new highly anisotropic nematic LC mixtures at those frequency ranges.

["Maturation" of the intestine during pregnancy: successive observation with ultrasound]. / Die "Reifung" des Darmes während der Schwangerschaft; fortlaufende Beobachtung mit Ultraschall.

The echographic images of the fetal intestines during the final 20 weeks of pregnancy are described. A comparison with the biparietal and abdominal diameter as well as with the echogenicity of the placenta is made. The sonographic images of the fetal intestines are divided into four grades, the last two appearing in the mature foetus only.

Crecimiento de los huesos largos y de los nucleos de osificacion del feto. / Development of the large bones and of the ossification nucleus of fetus

En 268 embarazos de entre 11 y 32 semanas, usando ultrasonidos, se estudio la longitud del femur, humero y los complejos cubito-radio y tibia y perone, como asi tambien los nucleos de osificacion distales del femur y proximales de la tibia. Las curvas de regresion obtenidas mostraron una clara correlacion estadistica con la edad gestacion. Se comparan nuestros resultados con casos de abortos tardios y partos prematuros. Como el nuevo material muestra la aparicion de nucleos de osificacion distal del femur a las 33 semanas y proximal de la tibia a las 37 semanas, se muestran las curvas de crecimiento

Crecimiento de los huesos largos y de los nucleos de osificacion del feto. / Development of the large bones and of the ossification nucleus of fetus

En 268 embarazos de entre 11 y 32 semanas, usando ultrasonidos, se estudio la longitud del femur, humero y los complejos cubito-radio y tibia y perone, como asi tambien los nucleos de osificacion distales del femur y proximales de la tibia. Las curvas de regresion obtenidas mostraron una clara correlacion estadistica con la edad gestacion. Se comparan nuestros resultados con casos de abortos tardios y partos prematuros. Como el nuevo material muestra la aparicion de nucleos de osificacion distal del femur a las 33 semanas y proximal de la tibia a las 37 semanas, se muestran las curvas de crecimiento