Maxillary Arch Dimensions in 6-Year-Old Cleft Children in Northern Finland: A Cross-Sectional Study.

The aim was to cross-sectionally examine the maxillary arch dimensions in 6-year-old children with cleft lip and/or palate and to compare them with the initial cleft sizes among patients with cleft palate. The study included 89 patients with clefts treated at the Oulu University Hospital. The subjects were divided into three groups: cleft palate, cleft lip, and cleft lip and palate. Study casts were scanned, and the maxillary arch dimensions were examined using a 3D program (3Shape Orthoanalyzer, Copenhagen, Denmark). The statistical methods Student's t-test and one-way ANOVA were used to compare the means (SD) between the groups. Spearman's correlation coefficient was used to determine the correlation between cleft severity and maxillary dimensions. A significant difference was found between different initial cleft sizes in terms of distance between the second deciduous molar and the first incisor on the right side. The intermolar width showed a negative correlation with the initial cleft size. The dimensions were shorter for clefts affecting the palate and largest for clefts affecting only the lip. Larger clefts resulted in a shorter maxilla on the right side. Many dimensions became shorter when the initial cleft was larger. Clefts of the palate resulted in smaller maxillas.

Dental fear among adolescents with cleft.

BACKGROUND: Dental fear is a prevalent phenomenon among children and adolescents globally. AIM: To investigate dental fear among 18-year-olds with cleft lip and/or palate (CLP) at their final follow-up cleft clinic visit, and to evaluate the association between dental fear and OHRQoL. DESIGN: This cross-sectional study included the cohort of children with CLP treated at the Oulu University Hospital Cleft Lip and Palate Center, in northern Finland since 1995. A total of 62 of 64 individuals participated in this study. The validated Finnish version of the Oral Health Impact Profile (OHIP-14) was used to assess OHRQoL. Dental fear was studied using the validated Modified Dental Anxiety Scale (MDAS) and cognitive vulnerability model (CVM). RESULTS: Almost two fifths of the participants reported moderate dental fear. Participants with cleft including lip and participants reporting impact on OHRQoL reported higher mean MDAS scores. In an unadjusted model, adolescents with cleft including lip had risk for higher dental MDAS scores compared with the ones with cleft including only palate. CONCLUSIONS: Dental fear is common among adolescents with CLP, specifically among those with clefts involving the lip. OHRQoL and dental fear seem to be associated.

Oral health-related quality of life among young adults with cleft in northern Finland.

OBJECTIVES: This study aimed to examine Oral Health-related Quality of Life (OHRQoL) among patients with cleft lip with or without palate (CLP) at their final scheduled follow-up visit at the age of 18 years. Another aim was to investigate the motivation to attend multiple follow-up appointments and the satisfaction with care given by the cleft team using inductive qualitative analysis. METHODS: This cross-sectional study was conducted among the cohort of children born with CLP who had undergone treatment at the Oulu University Hospital Cleft Lip and Palate Centre, in northern Finland since 1995. OHRQoL was assessed using the validated Finnish version of the short form of the Oral Health Impact Profile (OHIP-14). In addition to the OHIP-14, two open-ended questions were also included. These questions investigated the experience of each participant concerning their motivation to attend the Oulu University Hospital Cleft Lip and Palate Centre to receive complex treatments, and their satisfaction with care provided by the cleft team. Results were presented as proportions, means, and SD. Inductive content analysis method was performed for analysis of the open-ended questions. RESULTS: A total of 63 patients with CLP participated in this study. More than half of the participants had cleft palate. More than half of the participants reported an impact on OHRQoL (OHIP-14 score ≥ 3). All the participants with bilateral cleft lip and palate, three fourths of the participants with unilateral cleft lip and palate, and half of the participants with cleft palate reported impact on OHRQoL. Inductive content analysis showed that one fourth of the participants reported a good outcome as a motivation to attend cleft center despite of complex procedures. All the participants reported their appreciation of the cleft team. CONCLUSIONS: Despite the comprehensive treatment received by the patients born with a CLP, they still experienced lower OHRQoL, especially physical pain and psychological discomfort were more pronounced. However, good outcome, support, and oral health care being a normal routine were the motivating factors to attend a long and demanding oral health care regimen.

Three-Dimensional Bioprinting Using a Coaxial Needle with Viscous Inks in Bone Tissue Engineering - An In vitro Study.

INTRODUCTION: Vascularized autologous tissue grafts are considered "gold standard" for the management of larger bony defects in the craniomaxillofacial area. This modality does however carry limitations, such as the absolute requirement for healthy donor tissues and recipient vessels. In addition, the significant morbidity of large bone graft is deterrent to fibula bone flap use. Therefore, less morbid strategies would be beneficial. The purpose of this study was to develop a printing method to manufacture scaffold structure with viable stem cells. MATERIALS AND METHODS: In total, three different combinations of ground beta tri-calcium phosphate and CELLINK (bioinks) were printed with a nozzle to identify a suitable bioink for three-dimensional printing. Subsequently, a coaxial needle, with three different nozzle gauge combinations, was evaluated for printing of the bioinks. Scaffold structures (grids) were then printed alone and with additional adipose stem cells before being transferred into an active medium and incubated overnight. Following incubation, grid stability was evaluated by assessing the degree of maintained grid outline, and cell viability was determined using the live/dead cell assay. RESULTS: Among the three evaluated combinations of bioinks, two resulted in good printability for bioprinting. Adequate printing was obtained with two out of the three nozzle gauge combinations tested. However, due to the smaller total opening, one combination revealed a better stability. Intact grids with maintained stability were obtained using Ink B23 and Ink B42, and approximately 80% of the printed stem cells were viable following 24 hours. DISCUSSION: Using a coaxial needle enables printing of a stable scaffold with viable stem cells. Furthermore, cell viability is maintained after the bioprinting process.

Wound dehiscences following pre-implant bone augmentation with autogenous iliac crest bone grafts: A retrospective cohort study.

PURPOSE: To evaluate possible risk factors associated with wound dehiscences following pre-implant alveolar bone augmentation with autologous anterior iliac crest bone grafts covered with resorbable collagen membranes or human demineralised bone laminae. MATERIALS AND METHODS: Data of 161 patients who underwent bone augmentation prior to the insertion of dental implants were analysed. The preoperative dental status, locations of alveolar bone augmentation sites and location of wound dehiscences were recorded. Gender, age, smoking, alcohol exposure, and dental and medical histories were reviewed. Information was also collected on the surgeons, augmentation technique, application of a collagen membrane, fixation screw type and suture material. Univariate logistic regression analysis was used to evaluate pre- and perioperative variables as predictors of dehiscences. RESULTS: A total of 42 (26.1%) of the 161 augmented patients developed a wound dehiscence following surgery. Most commonly affected sites were the anterior maxilla, followed by the anterior mandible. Males developed wound dehiscences with higher probability than females (odds ratio female = 0.444; P = 0.025; 95% CI: 0.214 to 0.903). Furthermore, marginal associations (P < 0.10) are found for smoking and an anterior location of the augmentation. Smokers were found to have higher probability of a wound dehiscence (odds ratio 2.089; P = 0.064; 95% CI: 0.957 to 4.500) compared to non-smokers. A posterior location of the augmentation was associated with lower probability of a wound dehiscence (odds ratio 0.188; P = 0.076; 95% CI: 0.035 to 0.802) compared to an anterior location. CONCLUSIONS: Based on this study population, smoking in males seems to be the most important risk factor for the development of wound dehiscences after pre-implant alveolar bone augmentation procedures.

Outcomes of 40 Nonsyndromic Sagittal Craniosynostosis Patients as Adults: A Case-Control Study With 26 Years of Postoperative Follow-up.

BACKGROUND: While sagittal synostosis is the most common craniosynostosis, long-term follow-up of these patients is lacking. OBJECTIVE: To evaluate the results of surgical management of those patients with sagittal synostosis who attain adulthood. METHODS: An outcome study of surgically treated isolated sagittal synostosis patients operated between 1977 and 1998 was conducted at the Craniofacial Center of Oulu University Hospital, Oulu, Finland with an average follow-up time of 26.5 yr. Patients' socioeconomic situation, satisfaction with their own facial appearance and attractiveness as rated by 2 independent panels was evaluated and compared to controls. RESULTS: The self-satisfaction with the patients' own appearance scored a mean of 75 mm on a visual analog scale of 100 mm between the patients and 76 mm with the control group. The subjective satisfaction of the patients with their own appearance failed to correlate with the rating of their appearance by the panels. The panels rated the patients' appearance to be on average 6 to 7 mm out of 100 mm visual analog scale less attractive than the controls. Data on socioeconomic situation, including marital status, housing, education, employment of the patients, and controls are presented. CONCLUSION: Isolated sagittal synostosis patients treated surgically were as happy with their facial appearance as were individuals in an age and gender-matched control group. Two independent panels found the patients' appearance to be only somewhat less attractive. Analysis of the socioeconomic situation and general health revealed that patients equaled that of controls.

Dental Stem Cells Harvested from Third Molars Combined with Bioactive Glass Can Induce Signs of Bone Formation In Vitro.

OBJECTIVES: The aim of this study was to assess the interaction of a bioactive glass scaffold with cells derived from dental pulp, dental follicle and periodontal ligament. MATERIAL AND METHODS: Impacted third molars were surgically removed from three young donors. Cells from the dental pulp, follicle and periodontal ligament tissues were isolated and expanded. Different cell populations were characterised using specific CD markers. Expanded pulp, follicle and periodontal cells were then seeded onto bioactive glass scaffolds and cultured in osteogenic medium or basic medium. Cell attachment, viability, proliferation and alkaline phosphatase activity were assessed. RESULTS: This study revealed good biocompatibility of the specific bioactive glass configuration tested and the osteogenic induction of cells derived from dental pulp, dental follicle and periodontal ligament. Osteogenic medium seemed to increase the differentiation pattern and dental pulp stem cells showed the most positive results compared to periodontal ligament and dental follicle stem cells. CONCLUSIONS: Dental pulp stem cells combined with a bioactive glass scaffold and exposed to osteogenic medium in vitro represent a promising combination for future study of hard tissue regeneration in the cranio-maxillofacial skeleton.

Clinical Performance of Dental Implants Following Sinus Floor Augmentation: A Systematic Review and Meta-Analysis of Clinical Trials with at Least 3 Years of Follow-up.

PURPOSE: The purpose of this systematic review was to assess the survival of implants placed in augmented sinuses on a medium- to long-term basis, and identify factors affecting implant survival such as surgical technique, bone grafts, and timing of implant placement. MATERIALS AND METHODS: A literature search up to July 2016 was performed to identify prospective clinical studies on sinus floor augmentation in conjunction with implant placement with a minimum follow-up of 3 years. Meta-analytic methods were implemented to calculate implant survival rates and relative risks (RR) for failure and the effect of surgical technique, use of bone graft, graft type, use of membrane, mean residual bone height, and timing of implant insertion. RESULTS: A total of 17 clinical trials (1 randomized and 16 prospective nonrandomized) were included, which pertained to 637 patients (at least 48% male) and 1,610 implants placed after sinus floor augmentation with the osteotome (transalveolar) or lateral window approach. The pooled implant survival rate at 3 to 6 years of follow-up was 97.7% (17 studies; 95% CI = 94.4% to 99.7%) with high heterogeneity. Smoking was associated with significantly worse implant survival (2 studies; RR = 4.8; 95% CI = 1.2 to 19.4; P < .05). However, evidence of influencing factors varied from very low to moderate after adopting the GRADE approach, due to risk of bias, imprecision, inconsistency, and small-study effects. CONCLUSION: Current evidence suggests that implants in augmented sinuses have high survival rates, with smoking playing a potentially important negative role in their prognosis. Both indirect and direct maxillary sinus floor augmentation seem to have a low frequency of manageable complications.

Denosumab Treatment for Aggressive Multiple Recurrent Familial Central Giant-cell Granulomas.

BACKGROUND: Aggressive familial giant-cell granulomas of the jaws can be severely deforming. Surgical and nonsurgical treatments may be associated with multiple recurrences. Denosumab, a new generation antiresorptive drug, is an osteoclast inhibitor, which may be particularly useful to manage such potentially disfiguring lesions. MATERIALS AND METHODS: Two sisters, both with a history of multiple recurrent aggressive central giant-cell granuloma (CGCG)-like lesions in both jaws, were referred for management. All lesions were histologically consistent with the diagnosis of CGCG. The lesions were treated surgically with curettage and perilesional injection of triamcinolone. In particular, the older sister had four separate anatomic sites where some of her lesions had multiple recurrences necessitating three repeat procedures. A course of subcutaneous denosumab was administered following the last giant-cell granuloma removal in both sisters. RESULTS: Bony healing was normal. No further recurrences were observed over 3.5 years of follow-up after denosumab therapy in either sister. CONCLUSIONS: In this small cohort comprising two sisters with multiple aggressive recurrent giant-cell granuloma lesions at multiple sites in the mouth, subcutaneous denosumab administration was associated with success over 3.5 years of follow-up. This report cautiously adds to the clinical experience in the use of denosumab for the treatment of recurrent aggressive familial CGCG lesions.

3D assessment of damaged bicycle helmets and corresponding craniomaxillo-mandibular skull injuries: A feasibility study.

OBJECTIVES: In the Netherlands, cyclists continue to outnumber other road users in injuries and deaths. The wearing of bicycle helmets is not mandatory in the Netherlands even though research has shown that wearing bicycle helmets can reduce head and brain injuries by up to 88%. Therefore, the aim of this study was to assess the feasibility of using 3D technology to evaluate bicycle-related head injuries and helmet protection. METHODS: Three patients who had been involved in a bicycle accident while wearing a helmet were subjected to multi-detector row computed tomography (MDCT) imaging after trauma. The helmets were separately scanned using the same MDCT scanner with tube voltages ranging from 80kVp to 140kVp and tube currents ranging from 10mAs to 300mAs in order to determine the best image acquisition parameters for helmets. The acquired helmet images were converted into virtual 3D surface hence Standard Tessellation Language (STL) models and merged with MDCT-derived STL models of the patients' skulls. Finally, all skull fractures and corresponding helmet damage were visualized and related. RESULTS: Imaging bicycle helmets on an MDCT scanner proved to be feasible using a tube voltage of 120kVp and a tube current of 120mAs. Merging the resulting STL models of the patients' skull and helmet allowed the overall damage sustained by both skull and helmet to be related. CONCLUSION: Our proposed 3D method of assessing bicycle helmet damage and corresponding head injuries could offer valuable information for the development and design of safer bicycle helmets.

Randomized clinical trials in orthodontics are rarely registered a priori and often published late or not at all.

A priori registration of randomized clinical trials is crucial to the transparency and credibility of their findings. Aim of this study was to assess the frequency with which registered and completed randomized trials in orthodontics are published. We searched ClinicalTrials.gov and ISRCTN for registered randomized clinical trials in orthodontics that had been completed up to January 2017 and judged the publication status and date of registered trials using a systematic protocol. Statistical analysis included descriptive statistics, chi-square or Fisher exact tests, and Kaplan-Meier survival estimates. From the 266 orthodontic trials registered up to January 2017, 80 trials had been completed and included in the present study. Among these 80 included trials, the majority (76%) were registered retrospectively, while only 33 (41%) were published at the time. The median time from completion to publication was 20.1 months (interquartile range: 9.1 to 31.6 months), while survival analysis indicated that less than 10% of the trials were published after 5 years from their completion. Finally, 22 (28%) of completed trials remain unpublished even after 5 years from their completion. Publication rates of registered randomized trials in orthodontics remained low, even 5 years after their completion date.

Increases in Cranial Volume with Posterior Cranial Vault Distraction in 31 Consecutive Cases.

BACKGROUND: Posterior cranial vault distraction (PCVD) is a technique widely used in surgical treatment of craniosynostosis when cranial expansion is required. It has proven to be safe and to allow a significant increase of intracranial volume. OBJECTIVE: To evaluate increases in intracranial volume as a result of PCVD performed in Oulu Craniofacial center using 2 different methods based on 3-dimensional (3-D) photogrammetric imaging or plain skull radiographs. METHODS: All children less than 16 yr of age who were treated by PCVD (n = 31) from 2009 to 2015 at the Oulu Craniofacial Center were included. All patients were followed at outpatient clinics with plain radiographs performed for follow-up. In 5 patients, additional 3-D photogrammetric imaging was done pre- and postoperatively. RESULTS: The mean intracranial volume increase was 25.0%, ranging from 16.9% to 39.4%. In 5 patients, the increase in volume was calculated from the photogrammetric 3-D images comprising a mean of 17.4%. Volume calculations from cephalograms in the same patients gave a mean of 20.8%. Whether the distraction was a primary operation or patient had undergone previous cranioplasty did not influence the achieved volumetric results. There were no statistically significant differences in the distraction results between different diagnostic groups. CONCLUSION: PCVD is an effective surgical method to increase intracranial volume in a variety of clinical entities. Volumetric results of this procedure could be easily evaluated using 3-D photogrammetric imaging or plane radiographs that expose the patients to only low ionizing radiation doses.

Case-Based Review of Osteonecrosis of the Jaw (ONJ) and Application of the International Recommendations for Management From the International Task Force on ONJ.

Osteonecrosis of the jaw (ONJ) has been associated with antiresorptive therapy in both oncology and osteoporosis patients. This debilitating condition is very rare and advances in diagnosis and management may now effectively reduce the risk of its development and offer valuable treatment options for affected patients. This paper provides a case-based review of ONJ and application of the International Task Force on ONJ (referred to as the "Task Force") recommendations for the diagnosis and management of ONJ. The Task Force was supported by 14 international societies and achieved consensus from representatives of these multidisciplinary societies on key issues pertaining to the diagnosis and management of ONJ. The frequency of ONJ in oncology patients receiving oncology doses of bisphosphonate (BP) or denosumab is estimated at 1%-15%, and the frequency in the osteoporosis patient population receiving much lower doses of BP or denosumab is estimated at 0.001%-0.01%. Although the diagnosis of ONJ is primarily clinical, imaging may be helpful in confirming the diagnosis and staging. In those with multiple risk factors for ONJ for whom major invasive oral surgery is being planned, interruption of BP or denosumab therapy (in cancer patients) is advised, if possible, before surgery, until the surgical site heals. Major oral surgery in this context could include multiple extractions if surgical extractions are required, not simple forceps extractions. ONJ development may be reduced by optimizing oral hygiene and postoperatively using topical and systemic antibiotics as appropriate. Periodontal disease should be managed before starting oncology doses of BP or denosumab. Local debridement may be successful in disease unresponsive to conservative therapy. Successful surgical intervention has been reported in those with stage 3 disease; less severe disease is best managed conservatively. Teriparatide may be helpful in healing ONJ lesions and may be considered in osteoporosis patients at a high fracture risk in the absence of contraindications. Resumption of BP or denosumab therapy following healing of ONJ lesions is recommended, and there have not been reports of subsequent local recurrence.

Large ameloblastic fibro-odontoma in a 7-year-old girl with analysis of 108 cases.

BACKGROUND: Odontogenic tumors such as ameloblastic fibro-odontoma (AFO) are rare conditions in children and are often asymptomatic. AFOs are found by routine clinical and radiological examination or when they cause obvious intra- or extra-oral swelling. MATERIALS AND METHODS: A case of an AFO in a 7-year-old girl is described, and 107 cases from the literature and this report are analyzed. RESULTS: The total of 108 cases revealed the average age at presentation of AFO to be 6.3 years in boys and 9.6 years in girls. There was a slight male predilection and AFO lesions most often occurred in the posterior mandible. AFO was almost always associated with an unerupted tooth or teeth. CONCLUSIONS: While the recurrence rate of AFO was found to be 5.5%, long-term postoperative clinical and radiological follow-up is advised to ensure no future signs of aggressive recurrence.

Piezo harvesting of bone grafts from the anterior iliac crest: A technical note.

BACKGROUND: Autogenous bone graft harvesting from the iliac crest is associated with donor site morbidity. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction. MATERIALS AND METHODS: A piezosurgical handpiece and its selection of tips can easily be accommodated in an iliac crest wound to osteotomize and allow the harvest and delivery of autogenous bone grafts. RESULTS: Corticocancellous blocks or cancellous strips of autogenous bone can be readily harvested using a piezosurgical technique at the anterior iliac crest. CONCLUSION: Piezosurgery avoids some of the traumatic aspects of harvesting bone associated with the use of conventional rotary instruments or saws.

Autotransplantation donor tooth site harvesting using piezosurgery.

BACKGROUND: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. METHODS: A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. RESULTS: Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. CONCLUSIONS: Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

Micro-CT Analysis of Bone Healing in Rabbit Calvarial Critical-Sized Defects with Solid Bioactive Glass, Tricalcium Phosphate Granules or Autogenous Bone.

OBJECTIVES: The purpose of the present study was to evaluate bone healing in rabbit critical-sized calvarial defects using two different synthetic scaffold materials, solid biodegradable bioactive glass and tricalcium phosphate granules alongside solid and particulated autogenous bone grafts. MATERIAL AND METHODS: Bilateral full thickness critical-sized calvarial defects were created in 15 New Zealand white adult male rabbits. Ten defects were filled with solid scaffolds made of bioactive glass or with porous tricalcium phosphate granules. The healing of the biomaterial-filled defects was compared at the 6 week time point to the healing of autologous bone grafted defects filled with a solid cranial bone block in 5 defects and with particulated bone combined with fibrin glue in 10 defects. In 5 animals one defect was left unfilled as a negative control. Micro-computed tomography (micro-CT) was used to analyze healing of the defects. RESULTS: Micro-CT analysis revealed that defects filled with tricalcium phosphate granules showed new bone formation in the order of 3.89 (SD 1.17)% whereas defects treated with solid bioactive glass scaffolds showed 0.21 (SD 0.16)%, new bone formation. In the empty negative control defects there was an average new bone formation of 21.8 (SD 23.7)%. CONCLUSIONS: According to findings in this study, tricalcium phosphate granules have osteogenic potential superior to bioactive glass, though both particulated bone with fibrin glue and solid bone block were superior defect filling materials.

Tooth autotransplantation in the anterior maxilla and mandible: retrospective results in young patients.

OBJECTIVE: This retrospective study evaluated survival rates, prognosis, and overall success of autotransplanted teeth in young patients missing anterior teeth as a result of trauma, agenesis, or developmental disturbances. STUDY DESIGN: Retrospective data were collected from the medical records of patients who had undergone tooth autotransplantations to anterior sites between January 2001 and December 2012. Clinical variables, such as gender, age, surgical indications, donor and recipient sites, type of anesthetics, bone augmentation, and complications during follow-up, were assessed. RESULTS: A total of 59 donor teeth in 46 patients (30 boys and 16 girls; average age 12.15 years) were autotransplanted to the anterior region of the maxilla and mandible. After a mean follow-up period of 17.35 months (range 10-61 months), all of the transplanted teeth remained in situ with no complications. CONCLUSIONS: This study supports the autotransplantation of teeth to the anterior alveolus as a viable option suitable in growing patients with missing anterior teeth.

Iron-labeled adipose stem cells and neovascularization in rabbit calvarial critical-sized defects.

OBJECTIVE: The aim of this study was to evaluate the presence of iron-labeled adipose stem cells at the 2-week time point and vascular changes at the 2-week and 6-week time points using two different types of scaffolds. STUDY DESIGN: This study included 22 White New Zealand adult male rabbits. In six rabbits, full-thickness calvarial critical-sized defects were filled with autogenous adipose stem cells labeled with iron oxide seeded onto two scaffolds, namely, solid bioactive glass (BAG) or porous tricalcium phosphate granules (TCP) used on reciprocal sides of the skull. Eleven rabbits were implanted with adipose stem cell-seeded scaffolds without iron labeling for analysis of vascular changes. Five defects were left empty as negative control defects. The specimens were analyzed histologically at the 2-week and 6-week time points. RESULTS: The TCP group showed significantly more vascularity compared with the BAG group. A greater number of labeled stem cells were identified in the TCP group compared with the BAG group, but the difference was not statistically significant. CONCLUSIONS: This study revealed the differences in stem cell distribution and revascularization of the calvarial defect, which may be biomaterial dependent.

Soft Tissue Augmentation Techniques and Materials Used in the Oral Cavity: An Overview.

PURPOSE: Oral soft tissue augmentation or grafting procedures are often necessary to achieve proper wound closure after deficits resulting from tumor excision, clefts, trauma, dental implants, and tooth recessions. MATERIALS AND METHODS: Autologous soft tissue grafts still remain the gold standard to acquire a functionally adequate zone of keratinized attached gingiva. However, soft tissue substitutes are more commonly used because they minimize morbidity and shorten surgical time. RESULTS: This review aimed to assess soft tissue grafting techniques and materials used in the oral cavity from existing literature. There are a large variety of materials and techniques, including grafts, local flaps, allogenic derived matrices such as acellular dermal allograft, xenogenic tissue matrices from animal origin, and synthetic materials. CONCLUSIONS: Tissue engineering of oral mucosa represents an interesting alternative to obtain sufficient autologous tissue for reconstructing oral wounds using biodegradable scaffolds, and may improve vascularization and epithelialization, which are critical for successful outcomes.