High Levels of BPA and BPF Exposure during Pregnancy Are Associated with Lower Birth Weight in Shenyang in Northeast China.

Animal studies indicate that bisphenol A (BPA) has obesogenic effects. Recent experiments reported similar endocrine-disrupting effects of bisphenol F (BPF) and bisphenol S (BPS), which are substitutes of BPA. The aim of this study was to investigate the exposure levels of these bisphenols in pregnant women and their effects on the physical development of infants aged 0-12 months. This study recruited pregnant women who gave birth at a hospital between February 2019 and September 2020. Urine samples from these pregnant women in the third trimester of pregnancy were detected by using ultrahigh-performance liquid chromatography-triple quadruple mass spectrometry. Follow-ups at 6 and 12 months of age were conducted by telephone by pediatricians using a structured questionnaire. Multiple linear regressions were used to determine the associations between bisphenol concentrations and infant weight. A total of 113 mother-child pairs had complete questionnaires and urine samples as well as data on newborns aged 6 months and 12 months. The detection rates of urinary BPA, BPF, and BPS in pregnant women were 100, 62.83, and 46.02%, respectively. Their median levels are 5.84, 0.54, and 0.07 µg/L, respectively. Increased urinary BPA and BPF concentrations during pregnancy were significantly associated with lower birth weight (standardized regression coefficients [ß] = -0.081 kg, 95% confidence interval [CI]: -0.134 to -0.027; ß = -0.049 kg, 95% CI: -0.097 to -0.001). In addition, urinary BPA and BPF concentrations during pregnancy were positively associated with weight growth rate from 0 to 6 months (ß = 0.035 kg/mouth, 95% CI: 0.00-0.064; ß = 0.028 kg/mouth, 95% CI: 0.006-0.050), especially in female infants (ß = 0.054 kg/mouth, 95% CI: 0.015-0.093; ß = 0.035 kg/mouth, 95% CI: 0.005-0.065). Therefore, maternal BPA and BPF levels during pregnancy were negatively correlated with birth weight and positively correlated with the growth rate of infant weight at 0-6 months of age, especially in female infants.

Turning foes to friends: Advanced "in situ nanovaccine" with dual immunoregulation for enhanced immunotherapy of metastatic triple-negative breast cancer.

As a "cold tumor", triple-negative breast cancer (TNBC) exhibits limited responsiveness to current immunotherapy. How to enhance the immunogenicity and reverse the immunosuppressive microenvironment of TNBC remain a formidable challenge. Herein, an "in situ nanovaccine" Au/CuNDs-R848 was designed for imaging-guided photothermal therapy (PTT)/chemodynamic therapy (CDT) synergistic therapy to trigger dual immunoregulatory effects on TNBC. On the one hand, Au/CuNDs-R848 served as a promising photothermal agent and nanozyme, achieving PTT and photothermal-enhanced CDT against the primary tumor of TNBC. Meanwhile, the released antigens and damage-associated molecular patterns (DAMPs) promoted the maturation of dendritic cells (DCs) and facilitated the infiltration of T lymphocytes. Thus, Au/CuNDs-R848 played a role as an "in situ nanovaccine" to enhance the immunogenicity of TNBC by inducing immunogenic cell death (ICD). On the other hand, the nanovaccine suppressed the myeloid-derived suppressor cells (MDSCs), thereby reversing the immunosuppressive microenvironment. Through the dual immunoregulation, "cold tumor" was transformed into a "hot tumor", not only implementing a "turning foes to friends" therapeutic strategy but also enhancing immunotherapy against metastatic TNBC. Furthermore, Au/CuNDs-R848 acted as an excellent nanoprobe, enabling high-resolution near-infrared fluorescence and computed tomography imaging for precise visualization of TNBC. This feature offers potential applications in clinical cancer detection and surgical guidance. Collectively, this work provides an effective strategy for enhancing immune response and offers novel insights into the potential clinical applications for tumor immunotherapy.

Changes in bulbar conjunctival microcirculation and microvasculature during short-term scleral lens wearing and their associated factors.

OBJECTIVE: To explore the changes in microcirculation and microvasculature of the bulbar conjunctiva during the short-term wearing of the scleral lenses (ScCL). And investigate the factors affecting the microcirculation and microvasculature of the bulbar conjunctiva. METHODS: In this prospective cross-sectional study, functional slit lamp biomicroscopy (FSLB) was used to image the ocular surface microcirculation and microvascular images at two different sites (under the area of ScCL and outside of the area of ScCL) before (baseline) and during the wearing of ScCL at 0 h, 1 h, 2 h and 3 h. Anterior segment optical coherence tomography (AS-OCT) (RTVue, Optovue Inc, USA) was also used to image central post-lens tear film (PoLTF) and the morphology changes of the conjunctiva under the landing zone at the same time period. The semi-automatic quantification of microcirculation and microvasculature including vessel density (Dbox), vessel diameter (D), axial blood flow velocity (Va) and blood flow volume (Q). And the morphological changes of conjunctiva and PoLTF fogging grading were evaluated manually. The changes in the microcirculation and microvasculature of the ocular surface, PoLTF fogging grade and conjunctival morphology were compared before and during the ScCL wearing at different time periods, and the relationship between them was analyzed. RESULTS: Nineteen eyes (11 right eyes, 8 left eyes) were analyzed in this study. Outside of the area of ScCL, the Dbox before wearing lenses was less than that at 0 h (P = 0.041). The Q at baseline was greater than that after 1 h ScCL wearing (P = 0.026). Under the area of the ScCL, the Q at 1 h was less than that at baseline and 3 h. During the ScCL wearing, statistically significant conjunctival morphology changes were found among different time stages (baseline (0 µm), 0 h (113.18 µm), 2 h (138.97 µm), 3 h (143.83 µm) (all P ＜0.05). Outside the area of the ScCL, the morphology changes of the conjunctiva were negatively correlated with the changes of Va (P＜0.001,r = -0.471) and Q (P = 0.003,r = -0.348),but positively correlated with the Dbox (P = 0.001,r = 0.386). Under the area of ScCL, the morphology changes of the conjunctiva were negatively correlated with the Q (P = 0.012, r = -0.291). The fogging grade was positively correlated with the Q under the area of the ScCL (P = 0.005, r = 0.331). CONCLUSIONS: The microcirculation and microvasculature of the ocular surface and conjunctival morphology were changed after wearing ScCL in wearers, which indicated that the microvascular responses happened in the ScCL wearers and the severity of microvascular responses of the ocular surface related to the morphology changes of the conjunctiva. The quantification methods and findings in this study provide clues for the safety of ScCL wearing and may supervise the health of the wearer's ocular surface.

Deep learning models with optimized fluorescence spectroscopy to advance freshness of rainbow trout predicting under nonisothermal storage conditions.

This study established long short-term memory (LSTM), convolution neural network long short-term memory (CNN_LSTM), and radial basis function neural network (RBFNN) based on optimized excitation-emission matrix (EEM) from fish eye fluid to predict freshness changes of rainbow trout under nonisothermal storage conditions. The method of residual analysis, core consistency diagnostics, and split-half analysis of parallel factor analysis was used to optimize EEM data, and two characteristic components were extracted. LSTM, CNN_LSTM, and RBFNN models based on characteristic components of EEM used to predict the freshness indices. The results demonstrated the relative errors of RBFNN models with an R2 above 0.96 and relative errors less than 10% for K-value, total viable counts, and volatile base nitrogen, which were better than those of LSTM and CNN_LSTM models. This study presents a novel approach for predicting the freshness of rainbow trout under nonisothermal storage conditions.

An ammonia-sensitive fluorescence sensor based on polyvinyl alcohol-graphene quantum dots/halloysite nanotubes hybrid film for monitoring fish freshness.

A fluorescent hybrid film composed of nitrogen-doped graphene quantum dots (N-GQDs) loaded on halloysite nanotubes (HNTs) (N-GQDs/HNTs nanocomposite) as a sensitive element and polyvinyl alcohol (PVA) as a film-forming matrix was designed for freshness detection. The PVA-N-GQDs/HNTs hybrid film exhibited significantly enhanced fluorescence attributed to the loading of N-GQDs onto the surface of HNTs through electrostatic interactions and hydrogen bonding, effectively reducing their aggregation. The fluorescence of the hybrid film could be quenched by ammonia via photoinduced electron transfer (PET), with good linearity in the range of 20 ppm to 500 ppm ammonia and a limit of detection (LOD) of 0.63 ppm. In addition, the hybrid film was applied to monitor the freshness of seawater fish and freshwater fish stored at refrigeration and room temperature to evaluate the practicality of this approach. The developed hybrid film showed promise for nondestructive and on-site monitoring of fish spoilage.

Preparation of waterborne anti-counterfeiting ink based on dual luminescent nanohybrids of bacterial cellulose nanocrystals and lanthanide­nitrogen co-modified GQDs.

To address the growing challenge of counterfeit prevention, this study developed a novel anti-counterfeiting ink system based on bacterial cellulose nanocrystals (BCNC) and lanthanide (Er, Yb)­nitrogen (N) co-dropped graphene quantum dots (GQDs), which exhibited both photoluminescence (PL) and upconversion photoluminescence (UCPL) fluorescent properties as well as excellent rheological characteristics. The Er/Yb/N-GQDs with positive charges were synthesized by a one-step hydrothermal method and subsequently assembled with negatively charged BCNC through electrostatic self-assembly to fabricate a novel nanohybrid, Er/Yb/N-GQDs-BCNC. Raman spectroscopy results indicated an enhancement in the graphitization of GQDs due to lanthanide modification. The TEM results demonstrated a homogeneous distribution of Er/Yb/N-GQDs on BCNC, while XRD, FTIR, and XPS analyses confirmed their physical binding, thus validating the successful synthesis of novel nanohybrids. Then, Er/Yb/N-GQDs-BCNC was introduced into PVA waterborne ink and exhibited dual anti-counterfeiting properties by emitting blue fluorescence at Em 440 nm under Ex 370 nm and green fluorescence at Em 550 nm under Ex 980 nm. Furthermore, the incorporation of BCNC significantly enhanced the thixotropic behavior and yield stress of the PVA waterborne ink. This enhancement made the dual anti-counterfeiting fluorescent ink more suitable for diversified applications on different devices and various substrates, thus providing a novel approach for convenient and rapid information encryption and high security anti-counterfeiting.

Utility of real-time 3D visualization system in the early stage of phacoemulsification training.

AIM: To determine the teaching effects of a real-time three dimensional (3D) visualization system in the operating room for early-stage phacoemulsification training. METHODS: A total of 10 ophthalmology residents of the first-year postgraduate were included. All the residents were novices to cataract surgery. Real-time cataract surgical observations were performed using a custom-built 3D visualization system. The training lasted 4wk (32h) in all. A modified International Council of Ophthalmology's Ophthalmology Surgical Competency Assessment Rubric (ICO-OSCAR) containing 4 specific steps of cataract surgery was applied. The self-assessment (self) and expert-assessment (expert) were performed through the microsurgical attempts in the wet lab for each participant. RESULTS: Compared with pre-training assessments (self 3.2±0.8, expert 2.5±0.6), the overall mean scores of post-training (self 5.2±0.4, expert 4.7±0.6) were significantly improved after real-time observation training of 3D visualization system (P<0.05). Scores of 4 surgical items were significantly improved both self and expert assessment after training (P<0.05). CONCLUSION: The 3D observation training provides novice ophthalmic residents with a better understanding of intraocular microsurgical techniques. It is a useful tool to improve teaching efficiency of surgical education.

Targeting the mitochondrial protein YME1L to inhibit osteosarcoma cell growth in vitro and in vivo.

Exploring novel diagnostic and therapeutic biomarkers is extremely important for osteosarcoma. YME1 Like 1 ATPase (YME1L), locating in the mitochondrial inner membrane, is key in regulating mitochondrial plasticity and metabolic activity. Its expression and potential functions in osteosarcoma are studied in the present study. We show that YME1L mRNA and protein expression is significantly elevated in osteosarcoma tissues derived from different human patients. Moreover, its expression is upregulated in various primary and immortalized osteosarcoma cells. The Cancer Genome Atlas database results revealed that YME1L overexpression was correlated with poor overall survival and poor disease-specific survival in sarcoma patients. In primary and immortalized osteosarcoma cells, silencing of YME1L through lentiviral shRNA robustly inhibited cell viability, proliferation, and migration. Moreover, cell cycle arrest and apoptosis were detected in YME1L-silenced osteosarcoma cells. YME1L silencing impaired mitochondrial functions in osteosarcoma cells, causing mitochondrial depolarization, oxidative injury, lipid peroxidation and DNA damage as well as mitochondrial respiratory chain complex I activity inhibition and ATP depletion. Contrarily, forced YME1L overexpression exerted pro-cancerous activity and strengthened primary osteosarcoma cell proliferation and migration. YME1L is important for Akt-S6K activation in osteosarcoma cells. Phosphorylation of Akt and S6K was inhibited after YME1L silencing in primary osteosarcoma cells, but was strengthened with YME1L overexpression. Restoring Akt-mTOR activation by S473D constitutively active Akt1 mitigated YME1L shRNA-induced anti-osteosarcoma cell activity. Lastly, intratumoral injection of YME1L shRNA adeno-associated virus inhibited subcutaneous osteosarcoma xenograft growth in nude mice. YME1L depletion, mitochondrial dysfunction, oxidative injury, Akt-S6K inactivation, and apoptosis were detected in YME1L shRNA-treated osteosarcoma xenografts. Together, overexpressed YME1L promotes osteosarcoma cell growth, possibly by maintaining mitochondrial function and Akt-mTOR activation.

Fabrication and characterization of pullulan/tapioca starch-based antibacterial films incorporated with Litsea cubeba essential oil for meat preservation.

Active packaging is a novel technology that utilizes active materials to interact with products and the environment, improving food shelf life. The purpose of this work was to fabricate a multifunctional film using Litsea cubeba essential oil (LC-EO) (1 %, 3 %, 5 %, and 7 %) as the active ingredient and pullulan(P)/tapioca starch (TS) as the carrier material. Adding essential oil improves the films properties, such as barrier ability, anti-oxidant, and antibacterial activity. However, tensile strength (TS) and elongation at break (EAB) were slightly reduced from 28.94 MPa to 11.29 MPa and 15.36 % to 12.19 %. The developed PTS3% films showed the best performance in mechanical properties, especially EAB (14.26 %), WVP (3.26 %) and OP (3.13 %), respectively. The inhibitory zone diameters in the agar-well diffusion test were 18.59 mm for Staphylococcus aureus and 17.32 mm for Escherichia coli. Further study was conducted to compare the preservation effects of film with low-density polyethylene bag (LDPE) on chilled beef. Remarkably, PTS3% film decreased the bacterial population in beef meat while maintaining the pH, color, texture, and TBARS levels within an acceptable range for ten days of storage at 4 °C rather than in a low-density polyethylene bag. The outcomes indicated the potential of PTS3% films in food packaging applications.

Spontaneous Multi-scale Supramolecular Assembly Driven by Noncovalent Interactions Coupled with the Continuous Marangoni Effect.

Reported herein is the multi-scale supramolecular assembly (MSSA) process along with redox reactions driven by supramolecular interactions coupled with the spontaneous Marangoni effect in ionic liquid (IL)-based extraction systems. The black powder, the single sphere with a black exterior, and the single colorless sphere were formed step by step at the interface when an aqueous solution of KMnO4 was mixed with the IL phase 1-(2-hydroxyethyl)-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (C2OHmimNTf2) bearing octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO). The mechanism of the whole process was studied systematically. The phenomena were related closely to the change in the valence state of Mn. The MnO4- ion could be reduced quickly to δ-MnO2 and further to Mn2+ slowly by the hydroxyl-functionalized IL C2OHmimNTf2. Based on Mn2+, Mn(CMPO)32+, elementary building blocks (EBBs), and [EBB]n clusters were generated step by step. The [EBB]n clusters with the large enough size that were transferred to the interface, together with the remaining δ-MnO2, assembled into the single sphere with a black exterior, driven by supramolecular interactions coupled with the spontaneous Marangoni effect. When the remaining δ-MnO2 was used up, the mixed single sphere turned completely colorless. It was found that the reaction site of C2OHmim+ with Mn(VII) and Mn(IV) was distributed mainly at the side chain with a hydroxyl group. The MSSA process presents unique spontaneous phase changes. This work paves the way for the practical application of the MSSA-based separation method developed recently. The process also provides a convenient way to observe in situ and characterize directly the continuous Marangoni effect.

Comparative Transcriptome Analysis Reveals the Light Spectra Affect the Growth and Molting of Scylla paramamosain by Changing the Chitin Metabolism.

Light is an essential ecological factor that has been demonstrated to affect aquatic animals' behavior, growth performance, and energy metabolism. Our previous study found that the full-spectrum light and cyan light could promote growth performance and molting frequency of Scylla paramamosain while it was suppressed by violet light. Hence, the purpose of this study is to investigate the underlying molecular mechanism that influences light spectral composition on the growth performance and molting of S. paramamosain. RNA-seq analysis and qPCR were employed to assess the differentially expressed genes (DEGs) of eyestalks from S. paramamosain reared under full-spectrum light (FL), violet light (VL), and cyan light (CL) conditions after 8 weeks trial. The results showed that there are 5024 DEGs in FL vs. VL, 3398 DEGs in FL vs. CL, and 3559 DEGs in VL vs. CL observed. GO analysis showed that the DEGs enriched in the molecular function category involved in chitin binding, structural molecular activity, and structural constituent of cuticle. In addition, the DEGs in FL vs. VL were mainly enriched in the ribosome, amino sugar and nucleotide sugar metabolism, lysosome, apoptosis, and antigen processing and presentation pathways by KEGG pathway analysis. Similarly, ribosome, lysosome, and antigen processing and presentation pathways were major terms that enriched in FL vs. CL group. However, only the ribosome pathway was significantly enriched in up-regulated DEGs in VL vs. CL group. Furthermore, five genes were randomly selected from DEGs for qPCR analysis to validate the RNA-seq data, and the result showed that there was high consistency between the RNA-seq and qPCR. Taken together, violet light exposure may affect the growth performance of S. paramamosain by reducing the ability of immunity and protein biosynthesis, and chitin metabolism.

Transcriptome analysis reveals the inhibitory mechanism of phloretin on virulence expression of Staphylococcus aureus and its application in cooked chicken.

Staphylococcus aureus (S. aureus) enterotoxins have aroused great concern to food safety owing to its increased risk of food poisoning. The current research aimed to investigate the anti-virulence mechanisms of phloretin against S. aureus in terms of toxin activity and gene expression. The results indicated that phloretin could effectively inhibit the production of hemolysins and enterotoxins, and its anti-virulence effect was exerted in a concentration-dependent manner. Transcriptome results indicated that phloretin could downregulate the transcription level of majority virulence factors related genes (68 %) of S. aureus, including the quorum sensing-related genes (agrB, agrC, agrA, sspA, splF, splD and others) and bacterial secretion system-related genes (secDF, secY2, and yidC). In addition, it was speculated that phloretin was most likely to bind to the AgrA DNA binding domain, thereby affecting the expression of downstream virulence genes (hla, seb, spa, rot, geh, etc) based on molecular docking. Finally, the application in cooked chicken indicated that phloretin could effectively decrease the content of enterotoxins and improve the storage quality of cooked chicken. These findings not only evidenced the feasible anti-virulence activity of phloretin, but also provided a new strategy to prevent S. aureus food poisoning in cooked meat preservation.

Phosphoproteomics analysis reveals the anti-bacterial and anti-virulence mechanism of eugenol against Staphylococcus aureus and its application in meat products.

The increasing risk of food poisoning caused by Staphylococcus aureus (S. aureus) contamination has aroused great concern about food safety. Eugenol is highly favored due to its broad-spectrum antibacterial activity and non-drug resistance property. The study aimed to reveal the anti-bacterial and anti-virulence mechanisms of eugenol against S. aureus using phosphoproteomics. The results indicated that eugenol could inhibit the phosphorylation levels of enzyme I in the bacterial phosphotransferase system (PTS). Meanwhile, it could also inhibit the phosphorylation levels of key enzymes in bacterial carbon metabolism (such as glucose-6-phosphate isomerase of glycolysis and succinyl-CoA synthetase of tricarboxylic acid cycle), thereby decreasing the content of ATP and accelerating bacterial death. In addition, eugenol could inhibit the phosphorylation of AgrA in the quorum sensing system, thereby inhibiting the expression of agr operons (agrA and agrC) and downstream virulence genes (RNAIII, hla and seb). Finally, the application on beef indicated that eugenol could effectively decrease the content of enterotoxins and improve its storage quality. These findings provide a new way for eugenol to prevent S. aureus contamination and food poisoning in meat products.

A novel self-enhanced electrochemiluminescent aptamer sensor based on ternary nanocomposite PEI/RuSi-MWCNTs for the detection of profenofos residues in vegetables.

In this work, a novel ternary nanocomposite of PEI/RuSi-MWCNTs was designed and synthesized for the first time, which an ultrasensitive and self-enhanced electrochemiluminescent (ECL) aptasensor was developed for the detection of profenofos residues in vegetables. The self-enhanced complex PEI-Ru (II) enhanced the emission and stability of ECL, and the multi-walled carbon nanotubes (MWCNTs) acted as an excellent carrier and signal amplification. The PEI/RuSi-MWCNTs were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive spectrometer (EDS). The incorporation of gold nanoparticles (AuNPs) improved the performance of the sensor and provided a platform for the immobilization of the aptamer. The results of the experiment showed that the presence of profenofos significantly suppressed the electrochemiluminescence intensity of the sensor. The detection sensitivity of the aptamer sensor was in the range of 1 × 10-2 to 1 × 103 ng/mL. Under optimal conditions, the limit of detection (LOD) of the sensor for profenofos was 1.482 × 10-3 ng/mL. The sensor had excellent stability, reproducibility and specificity. The recoveries of the sensor ranged from 92.29 % to 106.47 % in real sample tests.

Recirculating aquaculture system as microbial community and water quality management strategy in the larviculture of Scylla paramamosain.

The structure and function of the water microbial community can change dramatically between different rearing modes. Yet investigations into the relationships between microbial community and water quality remain obscure. We provide the first evidence that rearing modes alter bacterial community and water quality in the rearing water of the mud crab (Scylla paramamosain) larvae. The juveniles in the recirculating aquaculture system (RAS) had a higher viability than those in the water exchange system (WES). RAS had the significantly lower levels of total ammonia nitrogen (TAN), NH3, NO2--N, total nitrogen (TN), total dissolved solids (TDS), and chemical oxygen demand than those of WES. The number of significantly different amplicon sequence variants between rearing modes increased as the larvae developed. NH3, TAN, TDS, NO2--N, and TN were closely related to the late alterations in water bacterial community. Both the FAPROTAX tool and quantitative PCR analysis showed enhanced nitrogen cycling functional potential of water bacterial community of RAS. Random forest analysis identified the enriched water bacteria especially heterotrophic bacteria such as Phaeodactylibacter, Tenacibaculum, and Hydrogenophaga, which were vital in removing nitrogenous compounds via simultaneous nitrification and denitrification. Notably, RAS could save 18.5 m3 of seawater relative to WES in larviculture on the scale of 2.5 m3. Together, these data indicate that RAS could function as microbial community and water quality management strategy in the larviculture of crab.

A machine learning model identifies M3-like subtype in AML based on PML/RARα targets.

The typical genomic feature of acute myeloid leukemia (AML) M3 subtype is the fusion event of PML/RARα, and ATRA/ATO-based combination therapy is current standard treatment regimen for M3 subtype. Here, a machine-learning model based on expressions of PML/RARα targets was developed to identify M3 patients by analyzing 1228 AML patients. Our model exhibited high accuracy. To enable more non-M3 AML patients to potentially benefit from ATRA/ATO therapy, M3-like patients were further identified. We found that M3-like patients had strong GMP features, including the expression patterns of M3 subtype marker genes, the proportion of myeloid progenitor cells, and deconvolution of AML constituent cell populations. M3-like patients exhibited distinct genomic features, low immune activity and better clinical survival. The initiative identification of patients similar to M3 subtype may help to identify more patients that would benefit from ATO/ATRA treatment and deepen our understanding of the molecular mechanism of AML pathogenesis.

Three-dimensional printing technique aids screw insertion into the sustentaculum tali of the internal fixation of intra-articular calcaneal fractures.

INTRODUCTION: Treating complex calcaneus fractures remains challenging. This study evaluated the influence of 3D printing and simulation on precision screw insertion into the calcaneus sustentaculum tali (ST). HYPOTHESIS: 3D printing and simulation improve the treatment for calcaneal fracture. PATIENTS AND METHODS: This retrospective cohort study included 85 patients admitted with 93 Sanders type II-IV intra-articular fractures from January 2015 to June 2020. Multi-slice computed tomography (MSCT) images were used in the conventional group, and MSCT data were used to construct a 3D model of the calcaneus to simulate screw insertion and verify parameter accuracy in the 3D group. RESULTS: The designed parameters (upward and backward oblique angles and screw-path length) were similar to the actual values in the 3D group (p=0.428,0.287,0.585) but not in the conventional group (p=0.01,0.002,0.023). The Maryland foot functional score, accuracy rate, and average screw number were higher and operative time was shorter in the 3D group (p=0.005,0.007,0.000,0.000). DISCUSSION: Preoperative simulation using the 3D printing model helped guide the screws into the ST more accurately, lending better-quality treatment for Sanders type II-IV calcaneal fractures. LEVEL OF PROOF: III; Retrospective case-control study.

Realization of digital twin for dynamic control toward sample variation of ion exchange chromatography in antibody separation.

Digital twin (DT) is a virtual and digital representation of physical objects or processes. In this paper, this concept is applied to dynamic control of the collection window in the ion exchange chromatography (IEC) toward sample variations. A possible structure of a feedforward model-based control DT system was proposed. Initially, a precise IEC mechanistic model was established through experiments, model fitting, and validation. The average root mean square error (RMSE) of fitting and validation was 8.1% and 7.4%, respectively. Then a model-based gradient optimization was performed, resulting in a 70.0% yield with a remarkable 11.2% increase. Subsequently, the DT was established by systematically integrating the model, chromatography system, online high-performance liquid chromatography, and a server computer. The DT was validated under varying load conditions. The results demonstrated that the DT could offer an accurate control with acidic variants proportion and yield difference of less than 2% compared to the offline analysis. The embedding mechanistic model also showed a positive predictive performance with an average RMSE of 11.7% during the DT test under >10% sample variation. Practical scenario tests indicated that tightening the control target could further enhance the DT robustness, achieving over 98% success rate with an average yield of 72.7%. The results demonstrated that the constructed DT could accurately mimic real-world situations and perform an automated and flexible pooling in IEC. Additionally, a detailed methodology for applying DT was summarized.

Inhibitory effects of citral on the production of virulence factors in Staphylococcus aureus and its potential application in meat preservation.

Foodborne diseases caused by Staphylococcus aureus contamination on meat and meat products has gained increasing attention in recent years, while the pathogenicity of S. aureus is mainly attributed to its virulence factors production, which is primarily regulated by quorum sensing (QS) system. Herein, we aimed to uncover the inhibitory effects and mechanisms of citral (CIT) on virulence factors production by S. aureus, and further explore its potential application in pork preservation. Susceptibility test confirmed the antibacterial properties of CIT against S. aureus, the minimal inhibitory concentration (MIC) was 0.25 mg/mL. Treatment with sub-MICs of CIT reduced the hemolytic activity by inhibiting the production of α-hemolysin, and staphylococcal enterotoxins (SEs) production was significantly inhibited by CIT in both culture medium and pork without affecting bacterial growth. Transcriptomic analysis indicated that the differentially expression genes encoding α-hemolysin, SEs, and other virulence factors were down-regulated after treatment with 1/2MIC CIT. Moreover, the genes related to QS including agrA and agrC were also down-regulated, while the global transcriptional regulator sarA was up-regulated. Data here demonstrated that CIT could inhibited S. aureus virulence factors production through disturbing QS systems. In a challenge test, the addition of CIT caused a remarkable inhibition of S. aureus population and delay in lipid oxidation and color change on pork after 15 days incubation at 4 °C. These findings demonstrated that CIT could not only efficiently restrain the production of S. aureus virulence factors by disturbing QS, but also exhibit the potential application on the preservation of meat products.