RESUMO
INTRODUCTION: Machine learning methods have emerged as objective tools to evaluate operative performance in urological procedures. Our objectives were to establish machine learning-based methods for predicting surgeon caseload for nerve-sparing robot-assisted radical prostatectomy using our validated hydrogel-based simulation platform and identify potential metrics of surgical expertise. METHODS: Video, robotic kinematics, and force sensor data were collected from 35 board-certified urologists at the 2022 AUA conference. Video was annotated for surgical gestures. Objective performance indicators were derived from robotic system kinematic data. Force metrics were calculated from hydrogel model integrated sensors. Data were fitted to 3 supervised machine learning models-logistic regression, support vector machine, and k-nearest neighbors-which were used to predict procedure-specific learning curve proficiency. Recursive feature elimination was used to optimize the best performing model. RESULTS: Logistic regression predicted caseload with the highest AUC score for 5/7 possible data combinations (force, 64%; objective performance indicators + gestures, 94%; objective performance indicators + force, 90%; gestures + force, 93%; objective performance indicators + gestures + force, 94%). Support vector machine predicted the highest AUC score for objective performance indicators (82%) and gestures (94%). Logistic regression with recursive feature elimination was the most effective model reaching 96% AUC in predicting case-specific experience. Most contributory features were identified across all model types. CONCLUSIONS: We have created a machine learning-based algorithm utilizing a novel combination of objective performance indicators, gesture analysis, and integrated force metrics to predict surgical experience, capable of discriminating between surgeons with low or high robot-assisted radical prostatectomy caseload with 96% AUC in a standardized, simulation-based environment.
Assuntos
Procedimentos Cirúrgicos Robóticos , Robótica , Masculino , Humanos , Procedimentos Cirúrgicos Robóticos/métodos , Benchmarking , Prostatectomia/métodos , Aprendizado de Máquina , HidrogéisRESUMO
BACKGROUND: Penile prosthesis implantation offers a durable, safe, and effective treatment option for male erectile dysfunction; however, many urologists feel apprehensive and uncomfortable placing penile prostheses due to limited training, low surgical experience, and intra- and postoperative complication management. AIM: To compare a previously validated hydrogel inflatable penile prosthesis (IPP) training model with cadaver simulations across 4 main categories: anatomic replication and realism, procedural replication and realism, educational effectiveness, and efficacy and safety. METHODS: An overall 88 participants (15 attendings, 18 fellows, and 55 residents) performed guided IPP placements on a cadaver and a hydrogel model. Based on a 5-point Likert scale, postsurveys were used to assess the participants' opinions regarding anatomic replication and realism, procedural replication and realism, educational effectiveness, and safety between the hydrogel model and cadavers. OUTCOMES: A direct head-to-head scenario was created, allowing participants to fully utilize the hydrogel model and cadaver, which ensured the most accurate comparison possible. RESULTS: A total of 84% agreed that the hydrogel model replicates the relevant human cadaveric anatomy for the procedure, whereas 69% agreed that the hydrogel tissue resembles the appearance of cadaveric tissue. Regarding the pubic bone, outer skin, corporal bodies, dartos layer, and scrotum, 79%, 74%, 82%, 46%, and 30% respectively agreed that the hydrogel tissue resembled the texture/behavior of cadavers. Furthermore, 66% of participants agreed that the hydrogel model replicates all the procedural steps. Specifically, participants agreed that the model replicates the skin incision/dartos dissection (74%), placement of stay suture and corporotomy (92%), corporal dilation (81%), measurement of prosthetic size (98%), reservoir placement (43%), IPP placement (91%), scrotal pump placement (48%), and skin closure (51%). Finally, 86%, 93%, and 78% agreed that the hydrogel model is useful for improving technical skills, as a teaching/practicing tool, and as an evaluation tool, respectively. To conclude, 81% of participants stated that they would include the hydrogel model platform in their current training. CLINICAL IMPLICATIONS: By replicating the IPP procedure, the hydrogel model offers an additional high-fidelity training opportunity for urologists, allowing them to improve their skills and confidence in placing penile prostheses, with the goal of improving patient surgical outcomes. STRENGTHS AND LIMITATIONS: The hydrogel training model allows users to perform the entire IPP placement procedure with high anatomic realism and educational effectiveness, maintaining many of the high-fidelity benefits seen in cadavers while improving safety and accessibility. CONCLUSION: Ultimately, this high-fidelity nonbiohazardous training model can be used to supplement and bolster current IPP training curriculums.
Assuntos
Disfunção Erétil , Implante Peniano , Prótese de Pênis , Masculino , Humanos , Prótese de Pênis/efeitos adversos , Hidrogéis , Implante Peniano/métodos , Disfunção Erétil/cirurgia , Disfunção Erétil/etiologia , CadáverRESUMO
Introduction and Objective: With introduction of the da Vinci single-port (SP) system, we evaluated which multiport (MP) robotic skills are naturally transferable to the SP platform. Methods: Three groups of urologists: Group 1 (5 inexperienced in MP and SP), Group 2 (5 experienced in MP without SP experience), and Group 3 (2 experienced in both MP and SP) were recruited to complete a validated urethrovesical anastomosis simulation using MP followed by SP robots. Performance was graded using both GEARS and RACE scales. Subjective cognitive load measurements (Surg-TLX and difficulty ratings [/20] of instrument collisions camera and EndoWrist movement) were collected. Results: GEARS and RACE scores for Groups 1 and 3 were maintained on switching from MP to SP (Group 3 scored significantly higher on both systems). Surg-TLX and difficulty scores were also maintained for both groups on switching from MP and SP except for a significant increase in SP camera movement (+7.2, p = 0.03) in Group 1 compared to Group 3 that maintained low scores on both. Group 2 demonstrated significant lower GEARS (-2.9, p = 0.047) and RACE (-5.1, p = 0.011) scores on SP vs MP. On subanalysis, GEARS subscores for force sensitivity and robotic control (-0.7, p = 0.04; -0.9, p = 0.02) and RACE subscores for needle entry, needle driving, and tissue approximation (-0.9, p = 0.01; -1.0, p = 0.02; -1.0, p < 0.01) significantly decreased. GEARS (depth perception, bimanual dexterity, and efficiency) and RACE subscores (needle positioning and suture placement) were maintained. All participants scored significantly lower in knot tying on the SP robot (-1.0, p = 0.03; -1.2, p = 0.02, respectively). Group 2 reported higher Surg-TLX (+13 pts, p = 0.015) and difficulty ratings on SP vs MP (+11.8, p < 0.01; +13.6, p < 0.01; +14 pts, p < 0.01). Conclusions: The partial skill transference across robots raises the question regarding SP-specific training for urologists proficient in MP. Novices maintained difficulty scores and cognitive load across platforms, suggesting that concurrent SP and MP training may be preferred.
Assuntos
Procedimentos Cirúrgicos Robóticos , Robótica , Humanos , Procedimentos Cirúrgicos Robóticos/educação , Competência Clínica , Simulação por Computador , Anastomose Cirúrgica/educaçãoRESUMO
PURPOSE: IRIS™ provides interactive, 3D anatomical visualizations of renal anatomy for pre-operative planning that can be manipulated by altering transparency, rotating, zooming, panning, and overlaying the CT scan. Our objective was to analyze how eye tracking metrics and utilization patterns differ between preoperative surgical planning of renal masses using IRIS and CT scans. METHODS: Seven surgeons randomly reviewed IRIS and CT images of 9 patients with renal masses [5 high complexity (RENAL score ≥ 8), 4 low complexity (≤ 7)]. Surgeons answered a series of questions regarding patient anatomy, perceived difficulty (/100), confidence (/100), and surgical plan. Eye tracking metrics (mean pupil diameter, number of fixations, and gaze duration) were collected. RESULTS: Surgeons spent significantly less time interpreting data from IRIS than CT scans (- 67.1 s, p < 0.01) and had higher inter-rater agreement of surgical approach after viewing IRIS (α = 0.16-0.34). After viewing IRIS, surgical plans although not statistically significant demonstrated a greater tendency towards a more selective ischemia approaches which positively correlated with improved identification of vascular anatomy. Planned surgical approach changed in 22/59 of the cases. Compared to viewing the CT scan, left and right mean pupil diameter and number/duration of fixations were significantly lower when using IRIS (p < 0.01, p < 0.01, p = 0.42, p < 0.01, respectively), indicating interpreting information from IRIS required less mental effort despite under-utilizing its interactive features. CONCLUSIONS: Surgeons extrapolated more detailed information in less time with less mental effort using IRIS than CT scans and proposed surgical approaches with potential to enhanced surgical outcomes.
Assuntos
Neoplasias Renais , Cirurgiões , Humanos , Imageamento Tridimensional , Rim/diagnóstico por imagem , Rim/cirurgia , Neoplasias Renais/diagnóstico por imagem , Neoplasias Renais/cirurgia , Nefrectomia/métodos , Tomografia Computadorizada por Raios XRESUMO
INTRODUCTION: Current training for robotic surgery crisis management, specifically emergency robotic undocking protocol (ERUP), remains limited to anecdotal experience. A curriculum to impart the skills and knowledge necessary to recognize and complete a successful ERUP was developed using an education approach then evaluated. METHODS: Baseline knowledge and confidence regarding ERUP were established for 5 robotic teams before completing 2 full-immersion simulations separated by an online self-paced learning module. In each simulation, teams operated on a perfused hydrogel model and were tasked to dissect a retroperitoneal tumor abutting a major vessel. During vascular pedicle ligation, a major vascular bleed and nonrecoverable robotic fault were remotely induced, necessitating ERUP with open conversion. After the simulation, participants completed surgery task load index (cognitive load assessment) and realism surveys. Weighted checklists scored participants' actions during each simulation. Surgical metrics including estimated blood loss, time to control bleeding, and undocking time were recorded. Curriculum retention was assessed by repeating the exercise at 6 months. RESULTS: Participants experienced high levels of cognitive demand and agreed that the simulation's realism and stress mimicked live surgery. Longitudinal analysis showed significant knowledge (+37.5 points, p = 0.004) and confidence (+15.3 points, p < 0.001) improvements from baseline to completion. Between simulations, checklist errors, undocking time, and estimated blood loss decreased (38â¾17, -40 seconds, and -500 mL, respectively), whereas action scores increased significantly (+27 points, p = 0.008). At 6 months, insignificant changes from curriculum completion were seen in knowledge (-4.8 points, p = 0.36) and confidence (+3.7 points, p = 0.1). CONCLUSIONS: This simulation-based curriculum successfully improves operative team's confidence, knowledge, and skills required to manage robotic crisis events.
Assuntos
Procedimentos Cirúrgicos Robóticos , Competência Clínica , Simulação por Computador , Currículo , Humanos , Procedimentos Cirúrgicos Robóticos/educação , Procedimentos Cirúrgicos Robóticos/métodosRESUMO
INTRODUCTION: Simulators provide a safe method for improving surgical skills without the associated patient risks. Advances in rapid prototyping technology have permitted the reconstruction of patient imaging into patient-specific surgical simulations that require advanced expertise, potentially continuing the learning curve. OBJECTIVES: To evaluate the impact of preoperative high-fidelity patient-specific percutaneous nephrolithotomy hydrogel simulations on surgical and patient outcomes. MATERIALS AND METHODS: Between 2016 and 2017, a fellowship-trained endourologist performed 20 consecutive percutaneous nephrolithotomy procedures at an academic referral center. For the first ten patients, only standard review of patient imaging was completed. For the next ten patients, patient imaging was utilized to fabricate patient-specific models including pelvicalyceal system, kidney, stone, and relevant adjacent structures from hydrogel. The models were tested to confirm anatomic accuracy and material properties similar to live tissue. Full procedural rehearsals were completed 24-48 h before the real case. Surgical metrics and patient outcomes from both groups (rehearsal vs. standard) were compared. RESULTS: Significant improvements in mean fluoroscopy time, percutaneous needle access attempts, complications, and additional procedures were significantly lower in the rehearsal group (184.8 vs. 365.7 s, p < 0.001; 1.9 vs. 3.6 attempts, p < 0.001; 1 vs. 5, p < 0.001; and 1 vs. 5, p < 0.001, respectively). There were no differences in stone free rates, mean patient age, body mass index, or stone size between the two groups. CONCLUSION: This study demonstrates that patient-specific procedural rehearsal is effective reducing the experience curve for a complex endourological procedure, resulting in improved surgical performance and patient outcomes.
Assuntos
Cálculos Renais , Nefrolitotomia Percutânea , Nefrostomia Percutânea , Fluoroscopia , Humanos , Rim , Cálculos Renais/cirurgia , Nefrolitotomia Percutânea/métodos , Nefrostomia Percutânea/métodos , Resultado do TratamentoRESUMO
OBJECTIVE: To evaluate the use of 3D computed aided designs and 3D-printed models as pre-operative planning tools for urologists, in addition to radiologist interpreted mp-MRIS, prior to radical prostatectomy procedures. METHODS: Ten patients with biopsy-positive lesions detected on mp-MRI were retrospectively selected. Radiologists identified lesion locations using a Prostate Imaging-Reporting and Data System (PI-RADS) map and segmented the prostate, lesion(s), and surrounding anatomy to create 3D-CADs and 3D-printed models for each patient. 6 uro-oncologists randomly reviewed three modalities (mp-MRI, 3D-CAD, and 3D-printed models) for each patient and identified lesion locations which were graded for accuracy against the radiologists' answers. Questionnaires assessed decision confidence, ease-of-interpretation, and usefulness for preoperative planning for each modality. RESULTS: Using 3D-CADs and 3D-printed models compared to mp-MRI, urologists were 2.4x and 2.8x more accurate at identifying the lesion(s), 2.7x and 3.2x faster, 1.6x and 1.63x more confident, and reported it was 1.6x and 1.7x easier to interpret. 3D-CADs and 3D-printed models were reported significantly more useful for overall pre-operative planning, identifying lesion location(s), determining degree of nerve sparing, obtaining negative margins, and patient counseling. Sub-analysis showed 3D-printed models demonstrated significant improvements in ease-of-interpretation, speed, usefulness for obtaining negative margins, and patient counseling compared to 3D-CADs. CONCLUSION: 3D-CADs and 3D-printed models are useful adjuncts to mp-MRI in providing urologists with more practical, accurate, and efficient pre-operative planning.
Assuntos
Desenho Assistido por Computador , Imageamento por Ressonância Magnética Multiparamétrica , Cuidados Pré-Operatórios , Impressão Tridimensional , Próstata/diagnóstico por imagem , Prostatectomia , Simulação por Computador , Humanos , Imageamento Tridimensional , Masculino , Modelos Anatômicos , Projetos Piloto , Próstata/cirurgia , Neoplasias da Próstata/diagnóstico por imagem , Neoplasias da Próstata/patologia , Neoplasias da Próstata/cirurgia , Estudos RetrospectivosRESUMO
Introduction: The da Vinci Skills Simulator (DVSS) is an effective platform for robotic skills training. Novel training methods using expert gaze patterns to guide trainees have demonstrated superiority to traditional instruction. Portable head-mounted eye-trackers (HMET) offer the opportunity for eye tracking technology to enhance surgical robotic simulation training. Objective: To evaluate if training guided by expert gaze patterns can improve trainee performance over standard movement training techniques during robotic simulation. Methods: Medical students were recruited and randomized into gaze training (GT, n = 9) and movement training (MT, n = 8) groups. First, the participants reviewed an instructional video, with the GT group emulating expert gaze patterns and the MT group (n = 8) standard movement-based instruction. Training consisted of 10 repetitions of "Suture Sponge 3" on the DVSS while wearing HMET; the first three repetitions were followed by group-appropriate video coaching (gaze vs movement feedback), while the remaining repetitions were without feedback. Finally, two multitasking repetitions with a secondary bell-counting task were completed. Primary outcomes included DVSS scores during training and multitasking. Secondary outcomes included metrics collected from the HMET (gaze patterns and gaze entropy). Results: Total score, efficiency, and penalties improved significantly over the training in both groups; the GT group achieved higher scores on every attempt. Total scores in the GT group were higher than the MT group postvideo review (20.3 ± 21.8 vs 3.0 ± 6.2, p = 0.047), after coaching repetitions (61.8 ± 18.8 vs 30.1 ± 26.2, p = 0.01), and at the last training attempt (73.0 ± 16.5 vs 63.1 ± 17.4, p = 0.247). During multitasking, the GT group maintained higher total scores (75 ± 10.1 vs 63.3 ± 15.3, p = 0.01), efficiency (86.3 ± 7.4 vs 77.4 ± 11.2, p = 0.009), and superior secondary task performance (error: 6.3% ± 0.06 vs 10.7% ± 0.11, p = 0.20). Gaze entropy (cognitive-load indicator) and gaze pattern analysis showed similar trends. Conclusion: Gaze-augmented training leads to more efficient movements through adoption of expert gaze patterns that withstand additional stressors.
Assuntos
Procedimentos Cirúrgicos Robóticos , Robótica , Treinamento por Simulação , Realidade Virtual , Competência Clínica , Simulação por Computador , Humanos , SuturasRESUMO
OBJECTIVE: To conduct a multi-institutional validation of a high-fidelity, perfused, inanimate, simulation platform for robot-assisted partial nephrectomy (RAPN) using incorporated clinically relevant objective metrics of simulation (CROMS), applying modern validity standards. MATERIALS AND METHODS: Using a combination of three-dimensional (3D) printing and hydrogel casting, a RAPN model was developed from the computed tomography scan of a patient with a 4.2-cm, upper-pole renal tumour (RENAL nephrometry score 7×). 3D-printed casts designed from the patient's imaging were used to fabricate and register hydrogel (polyvinyl alcohol) components of the kidney, including the vascular and pelvicalyceal systems. After mechanical and anatomical verification of the kidney phantom, it was surrounded by other relevant hydrogel organs and placed in a laparoscopic trainer. Twenty-seven novice and 16 expert urologists, categorized according to caseload, from five academic institutions completed the simulation. RESULTS: Clinically relevant objective metrics of simulators, operative complications, and objective performance ratings (Global Evaluative Assessment of Robotic Skills [GEARS]) were compared between groups using Wilcoxon rank-sum (continuous variables) and parametric chi-squared (categorical variables) tests. Pearson and point-biserial correlation coefficients were used to correlate GEARS scores to each CROMS variable. Post-simulation questionnaires were used to obtain subjective supplementation of realism ratings and training effectiveness. RESULTS: Expert ratings demonstrated the model's superiority to other procedural simulations in replicating procedural steps, bleeding, tissue texture and appearance. A significant difference between groups was demonstrated in CROMS [console time (P < 0.001), warm ischaemia time (P < 0.001), estimated blood loss (P < 0.001)] and GEARS (P < 0.001). Six major intra-operative complications occurred only in novice simulations. GEARS scores highly correlated with the CROMS. CONCLUSIONS: This perfused, procedural model offers an unprecedented realistic simulation platform, which incorporates objective, clinically relevant and procedure-specific performance metrics.
Assuntos
Benchmarking , Simulação por Computador , Neoplasias Renais/cirurgia , Nefrectomia/métodos , Procedimentos Cirúrgicos Robóticos , Feminino , Humanos , MasculinoRESUMO
OBJECTIVE: To examine the feasibility and utility of a completely online surgical skills elective for undergraduate medical students. DESIGN: The fully asynchronous, one-week, online learning elective addressed surgical instrument identification, knot tying, and suturing. Tools for knowledge acquisition and self-practice were outlined and individualized performance feedback on technical skills performance was incorporated from peers and experts through video conference. SETTING: University of Rochester School of Medicine & Dentistry, Rochester, NY. PARTICIPANTS: A total of 86 third- and fourth-year medical students enrolled and successfully completed the elective. RESULTS: At elective completion, nearly all students met their course objectives and significantly increased their confidence in surgical instrument identification, knot tying, and suturing. Objective measures of student knowledge and technical skills acquisition were overwhelmingly positive, and faculty and students were very satisfied with providing and receiving performance feedback. Students reported that expert feedback was more useful than peer feedback, and more students than faculty reported that the online modality was equivalent to an in-person session for performance review. CONCLUSIONS: This innovative online surgical skills elective improved undergraduate medical student confidence, knowledge, and skillset with surgical instrument identification, knot tying, and suturing while also facilitating effective expert feedback on individual performance.
Assuntos
Instrução por Computador , Educação de Graduação em Medicina , Educação Médica , Estudantes de Medicina , Competência Clínica , Humanos , Faculdades de Medicina , Técnicas de SuturaRESUMO
BACKGROUND: Three-dimensional (3D) printing technology has been utilized to create patient-specific (PS) replicas as visual aids for surgical planning.1-4 However, they cannot recreate the operative experience due to a lack of realistic tissue characteristics. OBJECTIVES: Develop anatomically accurate, realistic, PS partial nephrectomy platforms suitable for pre-operative surgical rehearsals using 3D-printing and hydrogel casting. MATERIAL: Patient CT scans were segmented into a computer-aided design (CAD) file and used to create injection casts. Kidney and tumor casts along with hollow vascular and urinary structures were 3D-printed. The hilar structures and tumor were registered into the kidney cast, injected with poly-vinyl alcohol (PVA) hydrogel, and processed to create the kidney phantom. Mechanical and functional testing protocols were completed to confirm that the properties of PVA matched the live tissue.5 Anatomical accuracy was confirmed by CT scanning the phantom and creating another CAD, which was compared to the original patient CAD. Full-procedural PS rehearsals were completed 24-48 hours prior to their respective live surgeries. Clinically relevant metrics (warm ischemia time, estimated blood loss, and positive surgical margins) from each rehearsal and live case were compared using a Wilcoxon-rank sum test. RESULTS: The 7%-3freeze/thaw PVA best recreated the mechanical and functional properties of porcine kidneys, while anatomical verification showed ≤1 mm deviation of the kidney and tumor from the patient anatomy and ≤3 mm for the hilar structures. PS rehearsal platforms were fabricated using these methods for 8 patients (average tumor size 5.92 cm and nephrometry score 9.8). A positive correlation was found for warm ischemia time and estimated blood loss between rehearsals and live surgeries. CONCLUSION: This reproducible method shows high anatomical accuracy, realistic tissue properties, and translational effects between rehearsals and live surgery. To determine the effects on patient outcomes, future studies will compare the impact of completing a pre-operative rehearsal vs standard surgical preparation.
Assuntos
Modelos Anatômicos , Nefrectomia/métodos , Impressão Tridimensional , Procedimentos Cirúrgicos Robóticos/métodos , Desenho Assistido por Computador , Humanos , Hidrogéis , Polivinil , Período Pré-OperatórioRESUMO
BACKGROUND: There is a significant need for a non-biohazardous, educational platform to equip and maintain the surgical skills required by urology trainees and low-volume implanters for inflatable penile prosthetic (IPP) placement. AIM: To design and develop an anatomic, hydrogel-based simulation platform for training and evaluate IPP placement using modern education theory. METHODS: The backward design concept was used as a framework in the design and development of an IPP simulation platform. Steps included delineating requirements from a physicians' perspective, translating requirements into engineering tasks (deliverables), developing a prototype, and pilot validation. Using a combination of 3-dimensional printing and hydrogel casting, a genitourinary tract model was constructed to replicate the appropriate steps of IPP placement guided by expert feedback. Full-immersion IPP simulations were performed through both infrapubic and penoscrotal approaches by 4 expert surgeons under operative conditions. Questionnaires evaluating the simulation's realism, value as a training tool, and further recommendations were completed. OUTCOMES: Using backward design educational pedagogy, a high-fidelity, full-procedural IPP simulation was fabricated and verified as an adequate educational tool for training and assessment. RESULTS: An expert consensus on the anatomic landmarks, steps and substeps, instruments, and errors to be included in the model was reached using a hierarchical task analysis and was successfully translated into a prototype hydrogel model. Experts performed all appropriate steps of IPP surgery and rated the simulation highly in terms of its realism and value as a training tool. On average, experts agreed that the model could function as a training tool, assessment tool, prerequisite for IPP accreditation, and requirement before live surgery. Experts stated they would have their trainees ideally complete an average of 1.75 models before live surgical training. All experts believed an operative checklist would be an ideal assessment tool. Witthaus MW, Saba P, Melnyk R, et al. The Future of Penile Prosthetic Surgical Training Is Here: Design of a Hydrogel Model for Inflatable Penile Prosthetic Placement Using Modern Education Theory. J Sex Med 2020;17:2299-2306.
Assuntos
Implante Peniano , Prótese de Pênis , Humanos , Hidrogéis , Masculino , Pênis/cirurgiaRESUMO
Introduction and Objective: Despite the adoption of robotic donor nephrectomy, the steep learning curve of robotic recipient transplantation has hindered the implementation of a complete robot-assisted kidney transplantation (RAKT). We sought to develop a high-fidelity perfused full immersion nonbiohazardous platform for RAKT simulation training. Methods: A three-dimensional (3D) computer-aided design (CAD) model consisting of a kidney, pelvicaliceal system, renal artery, and vein was created from a CT scan of a donor patient. 3D printed casts designed from the CAD model were injected with various polyvinyl alcohol hydrogel formulations to fabricate an anatomical kidney phantom and surrounding abdominal cavity. The process was repeated using a recipient's CT scan to create the recipient pelvic model containing a bony pelvis, pelvic musculature, iliac arteries and veins, and bladder. Donor and recipient models each contained structures to simulate the perfused vascular and ureterovesical anastomosis. A board-certified transplant surgeon completed a robotic training curriculum, including four RAKT simulation procedures, from procurement of the donor kidney to final retroperitonealization. Metrics from the simulations (e.g., arterial, venous, ureterovesical, and total anastomosis times) were recorded and compared with surgical times from published data. Results: The average time for the nephrectomies was 67.33 (±31.58) minutes. The average total anastomosis time was 60.85 (±9.73) minutes with 20.37 (±3.87), 20.17 (±4) and 15.1 (±2.35) minutes for arterial, venous, and ureterovesical anastomosis, respectively. The recorded arterial and venous anastomosis times were within published times for competency (Δ = 2.47 and Δ = 2.87, respectively), whereas the uterovesical time was within the mastery range (Δ = 0.45). Conclusions: Using a combination of 3D printing and hydrogel casting technologies, a high fidelity perfused full-immersion nonbiohazardous simulation platform for RAKT was developed. The utilization of this platform has the potential to replace the early cases in a learning curve while decreasing the barriers to utilization for transitioning transplant surgeons.
Assuntos
Transplante de Rim , Procedimentos Cirúrgicos Robóticos , Robótica , Humanos , Hidrogéis , Impressão TridimensionalRESUMO
The Eqs. 1, 2 and 3 come under the section "Kidney cortex testing" as per the original manuscript, but they have been incorrectly moved and separated into different sections in the original publication of the article.
RESUMO
INTRODUCTION AND OBJECTIVES: There is a scarcity of high-fidelity, life-like, standardized and anatomically correct polymer-based kidney models for robot-assisted partial nephrectomy (RAPN) simulation training. The purpose of this technical report is to present mechanical and functional testing data as evidence for utilizing a perfused hydrogel kidney model created utilizing 3D printed injection casts for RAPN simulation and training. METHODS: Anatomically correct, tumor-laden kidney models were created from 3D-printed casts designed from a patient's CT scan and injected with poly-vinyl alcohol (PVA). A variety of testing methods quantified Young's modulus in addition to comparing the functional effects of bleeding and suturing among fresh porcine kidneys and various formulations of PVA kidneys. RESULTS: 7% PVA at three freeze-thaw cycles (7%-3FT) was found to be the formula that best replicates the mechanical properties of fresh porcine kidney tissue, where mean(± SD) values of Young's modulus of porcine tissue vs 7%-3FT samples were calculated to be 85.97(± 35) kPa vs 80.97(± 9.05) kPa, 15.7(± 1.6) kPa vs 74.56(± 10) kPa and 87.46(± 2.97) kPa vs 83.4(± 0.7) kPa for unconfined compression, indentation and elastography testing, respectively. No significant difference was seen in mean suture tension during renorrhaphy necessary to achieve observable hemostasis and capsular violation during a simulated perfusion at 120 mmHg. CONCLUSIONS: This is the first study to utilize extensive material testing analyses to determine the mechanical and functional properties of a perfused, inanimate simulation platform for RAPN, fabricated using a combination of image segmentation, 3D printing and PVA casting.
Assuntos
Hidrogéis , Rim , Modelos Anatômicos , Nefrectomia/métodos , Impressão Tridimensional , Procedimentos Cirúrgicos Robóticos , Animais , Hidrogéis/administração & dosagem , Perfusão , SuínosRESUMO
OBJECTIVES: To incorporate and validate clinically relevant performance metrics of simulation (CRPMS) into a hydrogel model for nerve-sparing robot-assisted radical prostatectomy (NS-RARP). MATERIALS AND METHODS: Anatomically accurate models of the human pelvis, bladder, prostate, urethra, neurovascular bundle (NVB) and relevant adjacent structures were created from patient MRI by injecting polyvinyl alcohol (PVA) hydrogels into three-dimensionally printed injection molds. The following steps of NS-RARP were simulated: bladder neck dissection; seminal vesicle mobilization; NVB dissection; and urethrovesical anastomosis (UVA). Five experts (caseload >500) and nine novices (caseload <50) completed the simulation. Force applied to the NVB during the dissection was quantified by a novel tension wire sensor system fabricated into the NVB. Post-simulation margin status (assessed by induction of chemiluminescent reaction with fluorescent dye mixed into the prostate PVA) and UVA weathertightness (via a standard 180-mL leak test) were also assessed. Objective scoring, using Global Evaluative Assessment of Robotic Skills (GEARS) and Robotic Anastomosis Competency Evaluation (RACE), was performed by two blinded surgeons. GEARS scores were correlated with forces applied to the NVB, and RACE scores were correlated with UVA leak rates. RESULTS: The expert group achieved faster task-specific times for nerve-sparing (P = 0.007) and superior surgical margin results (P = 0.011). Nerve forces applied were significantly lower for the expert group with regard to maximum force (P = 0.011), average force (P = 0.011), peak frequency (P = 0.027) and total energy (P = 0.003). Higher force sensitivity (subcategory of GEARS score) and total GEARS score correlated with lower nerve forces (total energy in Joules) applied to NVB during the simulation with a correlation coefficient (r value) of -0.66 (P = 0.019) and -0.87 (P = 0.000), respectively. Both total and force sensitivity GEARS scores were significantly higher in the expert group compared to the novice group (P = 0.003). UVA leak rate highly correlated with total RACE score r value = -0.86 (P = 0.000). Mean RACE scores were also significantly different between novices and experts (P = 0.003). CONCLUSION: We present a realistic, feedback-driven, full-immersion simulation platform for the development and evaluation of surgical skills pertinent to NS-RARP. The correlation of validated objective metrics (GEARS and RACE) with our CRPMS suggests their application as a novel method for real-time assessment and feedback during robotic surgery training. Further work is required to assess the ability to predict live surgical outcomes.