A combination of angle insensitive stopband/passband filters based on one-dimensional hyperbolic metamaterial quasiperiodic photonic crystals.

In the present work, we demonstrate the transmittance properties of one dimensional (1D) quasi-periodic photonic crystals that contain a superconductor material and a hyperbolic metamaterial (HMM). A HMM layer is engineered by the subwavelength undoped and doped Indium Arsenide (InAs) multilayers. Many resonance peaks with angle stability are obtained from the proposed Fibonacci sequence structure using the transfer matrix method (TMM). In this case, the Fibonacci sequence serves as the mainstay in the design of our structure. The permittivity of the utilized superconductor and the HMM are also analyzed, respectively. The numerical findings showed that the incident angle has no effect on the wavelength positions of the resonance peaks. The effects of many parameters such as the superconductor material thickness, Fibonacci sequence number, and sequence type are discussed for the proposed structure. At various operating temperatures and superconductor material types, the transmittance characteristics of the proposed structure were also examined. The designed structure can serve as a combination of pass/stop band filters for near-infrared (NIR) applications.

Photonic crystal nanostructure as a photodetector for NaCl solution monitoring: theoretical approach.

In this research, we have a theoretical simple and highly sensitive sodium chloride (NaCl) sensor based on the excitation of Tamm plasmon resonance through a one-dimensional photonic crystal structure. The configuration of the proposed design was, [prism/gold (Au)/water cavity/silicon (Si)/calcium fluoride (CaF2)10/glass substrate]. The estimations are mainly investigated based on both the optical properties of the constituent materials and the transfer matrix method as well. The suggested sensor is designed for monitoring the salinity of water by detecting the concentration of NaCl solution through near-infrared (IR) wavelengths. The reflectance numerical analysis showed the Tamm plasmon resonance. As the water cavity is filled with NaCl of concentrations ranging from 0 g l-1 to 60 g l-1, Tamm resonance is shifted towards longer wavelengths. Furthermore, the suggested sensor provides a relatively high performance compared to its photonic crystal counterparts and photonic crystal fiber designs. Meanwhile, the sensitivity and detection limit of the suggested sensor could reach the values of 24 700 nm per RIU (0.576 nm (g l)-1) and 0.217 g l-1, respectively. Therefore, the suggested design could be of interest as a promising platform for sensing and monitoring NaCl concentrations and water salinity as well.

Multiplication of photonic band gaps in one-dimensional photonic crystals by using hyperbolic metamaterial in IR range.

The light-slowing effect near band endpoints is frequently exploited in photonic crystals to enhance the optical transmittance. In a one-dimensional binary photonic crystal (1DPC) made of hyperbolic metamaterials (HMMs), we theoretically examined the angle-dependent omnidirectional photonic bandgap (PBG) for TM polarization. Using the transfer matrix approach, the optical characteristics of the 1DPC structure having dielectric and HMM layers were examined at the infrared range (IR). As such, we observed the existing of numerous PBGs in this operating wavelength range (IR). Meanwhile, the HMM layer is engineered by the subwavelength dielectric- nanocomposite multilayers. The filling fraction of nanoparticles have been explored to show how they affect the effective permittivity of the HMM layer. Furthermore, the transmittance properties of the suggested structure are investigated at various incident angles for transverse magnetic (TM) and transverse electric polarizations. Other parameters such as, the permittivity of the host material, the filling fraction of nanoparticles, and the thickness of the second layer (HMM) are also taken into account. Finally, we investigated the effect of these parameters on the number and the width of the (PBGs). With the optimum values of the optical parameters of the nanocomposite (NC) layer, this research could open the way for better multi-channel filter photonic crystals.

Transmittance properties of one-dimensional metamaterial nanocomposite photonic crystal in GHz range.

We have theoretically demonstrated and explored the transmittance characteristics of a one-dimensional binary photonic crystal composed of metamaterial (MM) and nanocomposite (NC) layers. The NC layer was designed from silver nanoparticles (Ag-NPs) in a host material as Yttrium oxide (Y2O3). Using the transfer matrix approach (TMM), the optical properties of a one-dimensional binary periodic structure having MM and NC layers in the Giga Hertz (GHz) range were examined. The filling fractions of nanoparticles have been explored to see their effect on the effective permittivity of NC materials. Furthermore, the transmittance properties of the suggested structure were investigated at various incident angles for the transverse electric (TE) polarization. In addition to that, different parameters, such as the thickness of the MM layer, the permittivity of the host dielectric material, the filling fraction, and the thickness of the NC layer are also taken into account. We also discussed the effect of these parameters on the width of the photonic bandgap (PBG). With the optimum values of the optical parameters of NC layer, this research could open the way for better photonic crystal circuits, splitters, switches and others.

Plasmonic metasurfaces for subtractive color filtering: optimized nonlinear regression models.

We develop and explore a nonlinear regression modeling approach to designing subtractive color filters (SCFs) based on plasmonic metasurfaces. The approach opens up the possibility of rapidly choosing a desired optimized SCF design with high color saturation and brightness using an analytical expression. In this Letter, colors are produced by absorbing the light of specific wavelengths and reflecting the remaining spectrum with silver gap-plasmon nanoantennas deposited on a silver film. First, we design three different SCFs-yellow, magenta, and cyan. Then, by adjusting the design parameters of the nanoantennas, we optimize their high absorption resonance peaks (reflections dips), which are tunable over the visible spectrum. Finally, by using nonlinear regression analysis, we fit our results to a cubic regression model. Accordingly, a SCF for a color of choice can be designed in a straightforward way. This is a promising technique that provides a methodology to design preoptimized filters for practical applications such as color printing, high-resolution chromatic displays, and multi-spectral imaging.