RESUMO
INTRODUCTION: Cemented hemiarthroplasty (HA) is preferred in treating dislocated femoral neck fractures in elderly, osteoporotic patients, since uncemented HA was associated with mechanical complications more frequently. Cementation can conversely cause cardiopulmonary complications, leading to demand on safe, uncemented implants addressing osteoporosis. This study is set up as a retrospective feasibility study on the use of an uncemented, collared wedge implant (Actis®, DePuy Synthes, Warsaw, IN), for HA in elderly patients, focusing on complication rate. MATERIALS AND METHODS: From 1,194 patients, treated with HA in two study centers between 2017-2022, 188 received Actis® uncemented stem with bipolar head. Complete follow-up were retrospectively collected in all patients. RESULTS: In 188 patients (f: 64.9%; age: 83.1 ± 7.7a) included, no case of intra-operative mortality was recorded. 2 day mortality was 1.1%, 30 day mortality was 7.4% and 1 year mortality was 28.2%. 2 (1.1%) intra-operative fractures did not receive surgical revision, 3 (1.6%) post-operative periprosthetic fractures caused separate admission and revision. 2 cases (1.1%) of early infection required surgical revision. CONCLUSION: Our data provide proof of concept, that Actis® Stem allows an alternative, uncemented treatment option for displaced femoral neck fractures with HA. In case of preoperative or intraoperative medial cortical bone defects, stability of this implant is deteriorated.
Assuntos
Fraturas do Colo Femoral , Hemiartroplastia , Prótese de Quadril , Complicações Pós-Operatórias , Humanos , Fraturas do Colo Femoral/cirurgia , Fraturas do Colo Femoral/complicações , Feminino , Masculino , Hemiartroplastia/métodos , Hemiartroplastia/efeitos adversos , Estudos Retrospectivos , Idoso de 80 Anos ou mais , Idoso , Prótese de Quadril/efeitos adversos , Complicações Pós-Operatórias/epidemiologia , Estudos de Viabilidade , Desenho de Prótese , Artroplastia de Quadril/métodos , Artroplastia de Quadril/efeitos adversosRESUMO
Intraoperative radiography imaging is essential for accurate spinal implant placement. Hazards caused by ionizing radiation raised concern on personnel's work life long exposure in the operating room (OR). To particularize a cumulative risk estimation of radiation of personnel and patient, depending on used methods (C-arm fluoroscopy, O-arm navigation) and patient characteristics during spinal surgery, detailed investigation of radiation exposure in a clinical setting is required. Lumbosacral dorsal spinal fusion was performed in 37 patients (19 navigated, 18 fluoroscopy) during this prospective study. Radiation exposure was measured on several body regions with thermoluminescent dosimeters on patient and OR personnel (surgeon, assistant, sterile nurse, radiology technologist). Comparison between patient characteristics and radiation exposure was included. The highest patients values were measured in the surgery field and gonads area during navigation (43.2 ± 19.4 mSv; fluoroscopy: 27.7 ± 31.3 mSv; p = 0.02), followed by the thoracic region during fluoroscopy (7.7 ± 14.8 mSv; navigation: 1.1 ± 1.0 mSv; p = 0.06), other measured regions can be considered marginal in comparison. Amongst OR personnel exposure of the surgeon was significant higher during fluoroscopy (right hand: 566 ± 560 µSv and thoracic region: 275 ± 147 µSv; followed by thyroid and forehead) compared to navigation (right finger: 49 ± 19 µSv; similar levels for all regions; p < 0.001 in all regions). When compared to the surgeon, other OR personnel had significantly lower radiation doses on all body regions using fluoroscopy, and similar dose during navigation. The highest eye's lens region value was measured during fluoroscopy for the patient (185 ± 165 µSv; navigation: 205 ± 60 µSv; p = 0.57) and the surgeon (164 ± 74 µSv; navigation: 92 ± 41 µSv; p < 0.001). There was a significant correlation between patient BMI and radiation exposure to the surgery field during fluoroscopy. To our knowledge, these data present the first real life, detailed comparison of radiation exposure on OR personnel and patients between clinical use of navigation and fluoroscopy. Although patient's radiation dose is approximately 3-fold during navigation compared to the fluoroscopy, we found that a spinal surgeon could perform up to 10-fold number of surgeries (10.000 versus 883) until maximum permissible annual effective radiation dose would be reached. Especially for a spinal surgeon, who is mainly exposed amongst OR personnel, radiation prevention and protection must remain a main issue.
Assuntos
Fluoroscopia/efeitos adversos , Período Intraoperatório , Salas Cirúrgicas/normas , Exposição à Radiação/normas , Coluna Vertebral/cirurgia , Cirurgia Assistida por Computador/efeitos adversos , Humanos , Exposição Ocupacional/normas , Estudos Prospectivos , Doses de Radiação , Exposição à Radiação/análise , CirurgiõesRESUMO
Morbid obesity is associated with reduced health-related quality of life (HRQOL), increased morbidity and mortality. Little is known about the correlation between obesity and complex distal radius fractures (DRF). The purpose of this study was to examine the effect of being overweight on postoperative HRQOL after surgically treated intra-articular DRF. Fifty-three patients were included in this retrospective study with 7 years' mean follow-up (mean 7.2±0.4, range 6.4-7.9 years) after volar plating of an intra-articular DRF (AO-type C). All patients were categorized by their body mass index (BMI) into two study groups: group 1 (normal weight) with a BMI<25 (n=24); group 2 (obese) with a BMI≥25 (n=29). HRQOL and functional outcomes were assessed through range of motion (ROM) and four different scores - the 36-item short form health survey (SF-36), the disability of arm and shoulder score (DASH), the Gartland and Werley score and the Castaing score - along with X-rays to measure volar tilt, radial inclination, radial length and articular congruity. All HRQOL assessments and clinical outcomes were correlated to BMI by comparing group 1 versus group 2. There was no difference in terms of postoperative ROM. The group of normal weight patients achieved slightly better but non-significant results for the Gartland and Werley score. No differences were seen in the DASH score or SF-36. There were also no differences regarding the Castaing score. Overall, normal and obese patients had no significant differences their HRQOL and functionality after volar plating of DRF.
Assuntos
Índice de Massa Corporal , Fraturas Intra-Articulares/cirurgia , Qualidade de Vida , Fraturas do Rádio/cirurgia , Placas Ósseas , Avaliação da Deficiência , Feminino , Seguimentos , Fixação Interna de Fraturas , Humanos , Masculino , Pessoa de Meia-Idade , Amplitude de Movimento Articular , Estudos RetrospectivosRESUMO
Platelet-rich plasma (PRP) and growth factors have been increasing in popularity for the orthopedic treatment of degenerative and traumatic diseases. The treatment concept is based on the substitution of growth-inducing substances in tissues with low or absent regeneration capacity (cartilage, tendons) as well as for the induction or further acceleration of growth and regeneration (bone, muscle). This review article provides an overview on the clinical feasibility of usage and a summary of the current study situation.
Assuntos
Sistema Musculoesquelético , Plasma Rico em Plaquetas , Cartilagem , Peptídeos e Proteínas de Sinalização Intercelular , TendõesRESUMO
Purpose. Anterior screw fixation has become a popular surgical treatment method for instable odontoid fractures. Screw loosening and migration are a rare, severe complication following anterior odontoid fixation, which can lead to esophagus perforation and requires revision operation. Methods. We report a case of screw loosening and migration after anterior odontoid fixation, which perforated the esophagus and was excreted without complications in a 78-year-old male patient. Results. A ventral dislocated anterior screw perforated through the esophagus after eight years after implantation and was excreted through the gastrointestinal (GI) tract. At a 6-month follow-up after the event the patient was asymptomatic. Conclusion. Extrusion via the GI tract is not safe enough to be considered as a treatment option for loosened screws. Some improvements could be implemented to prevent such an incident. Furthermore, this case is a fine example that recent preoperative imaging is mandatory before revision surgery for screw loosening.
RESUMO
BACKGROUND: Metal-on-metal hip resurfacing is an alternative to metal-on-metal total hip arthroplasty, especially for young and physically active patients. However, wear which might be detected by increased serum ion levels is a matter of concern. METHODS: The aims of this preliminary study were to determine the raise of metal ion levels at 2-years follow-up in a prospective setting and to evaluate differences between patients with either resurfacing or total hip arthroplasty. Furthermore we investigated if the inclination of the acetabular component and the arc of cover would influence these findings. Therefore, 36 patients were followed prospectively. RESULTS: The results showed increments for Co and Cr in both implant groups. Patients treated with large-diameter total hip arthroplasty showed fourfold and threefold, respectively, higher levels for Co and Cr compared to the resurfacing group (Co: p < 0,001 and Cr: p = 0,005). Nevertheless, we observed no significant correlation between serum ion levels, inclination and arc of cover. DISCUSSION: In order to clarify the biologic effects of ion dissemination and to identify risks concerning long-term toxicity of metals, the exposure should be monitored carefully. Therefore, long-term studies have to be done to determine adverse effects of Co and Cr following metal-on-metal hip replacement.
Assuntos
Artroplastia de Quadril/instrumentação , Cromo/sangue , Cobalto/sangue , Articulação do Quadril/cirurgia , Prótese de Quadril , Vitálio , Acetábulo/diagnóstico por imagem , Acetábulo/cirurgia , Adulto , Artroplastia de Quadril/efeitos adversos , Feminino , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Seguimentos , Articulação do Quadril/diagnóstico por imagem , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Desenho de Prótese , Radiografia , Fatores de Tempo , Resultado do TratamentoRESUMO
BACKGROUND: Crosslinked polyethylene (XPE) was developed to reduce the wear rate in hip as well as knee arthroplasty. The crosslinking process reduces the mechanical properties of ultra-high-molecular-weight polyethylene (UHMWPE), particularly its fatigue strength. UHMWPE fatigue occurs more frequently in the knee than in the hip joint due to its changing tribocontact areas (TCAs) combined with high weight bearing. This is why XPE is still controversially discussed for use in total knee arthroplasty. Therefore, the potential advantage of using XPE in the knee was analysed in a simulator study with a focus on potential fatigue wear mechanisms. METHODS: Three different kinds of XPE and one conventional UHMWPE were tested over 5 million cycles in fixed-bearing knee designs. The TCAs were examined by replicas, and their extent was measured. The wear mechanism was analysed by scanning electron microscopy. RESULTS: The extent of the TCAs was less than 5% for all XPEs, whereas 35% for the conventional UHMWPE. Fatigue wear mechanisms were not observed. CONCLUSION: The measured small extent of the TCAs as a predictor of a low wear rate without any fatigue wear mechanism shows a possible advantage for the use of XPE even in knee arthroplasty.