RESUMO
OBJECTIVE: The purpose of the present study was to evaluate the mid-term implant survivorship, modes of failure, radiographic results, and clinical outcomes of current cementless total hip arthroplasty (THA) treatment designs for steroid-induced avascular necrosis (AVN). METHODS: A time span of 5 years between January 2012 and November 2017 was scanned to accommodate 5 years of follow-up and a total of 15 patients (18 hips), who had undergone implantation of ultra-high molecular weight polyethylene (UHMWPE) and newly designed other head and liner components, were included in the study. Only patients operated for steroid-induced AVN were included in the study. Patients with alcohol-induced, idiopathic, and traumatic AVN were excluded from the study. The primary outcomes were the assessments of Harris Hip Score (HHS) and the presence of loosening, osteolysis, polyethylene wear or a reoperation (with or without revision of components). The fixation of cementless femoral components was assessed according to Engh criteria. RESULTS: The study group consisted of 18 hips from 15 patients. The mean age was 47.6±8.1 (29-55) years. A cementless femoral stem and acetabular cup were used for all patients. Septic loosening was detected in all components of one patient (5.6%). The mean HHS score was 83.3±7.2 (60-92) for all patients. Of the 18 hips, 83% (15 hips), 5.6% (1 hip), 5.6% (1 hip), and 5.6% (1 hip) had good, poor, fair, and excellent HHS scores. Ceramic or polyethylene liner wear was not detected in any of the patients. The Engh Grading Scale revealed a "bone ingrowth" in 16 (89%) hips, "suspected in-growth" in 1 (5.6%) hip and "suboptimum but stable" femoral fixation in a patient with septic loosening (5.6%) just before revision surgery. There was no significant correlation between femoral stem design and Engh score (p=0.842). CONCLUSION: Modern total hip arthroplasty systems, including ceramic on ceramic or ceramic on polyethylene headliner options with cementless femoral stem, offer promising mid-term survivorship and positive clinical outcomes for steroid-induced AVN treatment. However, studies including long-term follow-ups with larger sample size are needed to obtain more precise data.
RESUMO
INTRODUCTION: Total hip arthroplasty for developmental hip dysplasia is a challenging surgery due to anatomic abnormalities. Crowe III and Crowe IV hip dysplasia generally necessitates a subtrochanteric shortening osteotomy. Transverse and step-cut osteotomy are the most common procedures for shortening of femur although there is still no consensus which one is a superior method. The objective of this study was to demonstrate whether transverse or step-cut osteotomy is superior in hips who undergo arthroplasty for high riding hip dysplasia. HYPOTHESIS: Our hypothesis was that higher rates of union would be achieved in patients with Crowe III-IV hip dysplasia when the step-cut osteotomy was performed compared to transverse osteotomies. MATERIAL AND METHODS: A total of 99 hips from 90 patients (9 bilateral, 81 unilateral; 79 female, 11 male), each with a minimum follow-up duration of two years, were included in this study. The hips were classified as Crowe III (n=16) or IV (n=83). All hips were implanted cementless. Transverse or step-cut osteotomy was chosen for osteotomy type. The clinical and functional outcomes were assessed using the Harris Hip Score (HHS), limb length discrepancy (LLD), and limping. The complications and management of these were noted. The union rates were compared between osteotomy types. RESULTS: The mean age at surgery was 48.8 (range, 21-79 years). The follow-up period was 64.3 months in average (range, 24 to 192 months). The mean Harris Hip Score before surgery was 35.6 (range, 18-50), and increased to 88.1 (range, 61-98) points at the most recent follow-up. The preoperative leg length discrepancy (LLD) measured 5.3cm (with a range of 3 to 6.8), while the postoperative LLD reduced to 0.8cm (with a range of 0 to 1.6). There were a total of 38 complications in 35 patients out of 99 cases, resulting in a complication rate of 38.4%. The most frequent complication observed was intraoperative femoral fractures, occurring in 13 cases. Residual limping was seen in 73.7% of all. Step-cut osteotomy was performed in 64 hips (35 CDH stem [Zimmer Biomet, Warsaw, IN, USA], 29 Wagner Cone stem [Zimmer Biomet, Warsaw, IN, USA]) and, transverse in 35 hips (22 CDH, 13 Wagner Cone). Six hips had nonunion problem and all of them were operated with a step-cut osteotomy (z-score: -7.12 and p<0.00001, Mann-Whitney U Test). CONCLUSION: Transverse osteotomy may be a better option while performing a shortening subtrochanteric level osteotomy for total hip arthroplasty for Crowe III-IV hips. LEVEL OF EVIDENCE: Level III; observational retrospective cohort study.
RESUMO
OBJECTIVE: Neural tube defects are the most common congenital disorders after cardiac anomalies. Lumbar kyphosis deformity is observed in 8-15% of these patients. This deformity severely limits the daily lives of these patients. In our study, we aimed to correct the kyphosis angle of the patients with lumbar kyphosis associated with myelomeningocele (MMC) and allow them to continue their growth without limiting their lung capacity by applying kyphectomy and sliding growing rod technique. PATIENTS AND METHODS: In this study, we retrospectively evaluated 24 patients with congenital lumbar kyphosis deformity associated with MMC, aged between 4 and 9 years, and who applied to Umraniye Training and Research Hospital between the dates of 2018 and 2021. We evaluated preoperative and postoperative kyphosis angles, correction rates, bleeding during operations, operation time, level of instrumentation, number of the resected vertebrae, initial levels of the posterior defects, duration of hospital stays, annual lengthening, and weight of the patients. RESULTS: Mean age was 5.04 (between 4 and 9). Mean preoperative and early postoperative kyphosis angles were 129.8° (87-175°) and 0.79° (- 20-24°), respectively. The kyphotic deformity correction rate was 99.1%. A difference was found regarding kyphosis measurements between preoperative and early period values (p < 0.05). The annual height lengthening of patients was calculated as 0.74 cm/year and 0.77 cm/year between T1-T12 and T1-S1, respectively. Mean preoperative level of hemoglobin (Hgb) was 11.95, postoperative Hgb value was 10.02, and the decrease was significant (p < 0.05). In terms of complications, 50% (12) had broken/loosen screws, 50% (12) had undergone debridement surgery, 37.5% (9) had vacuum-assisted closure therapy, and 33.3% (8) had to get all of their implants removed. CONCLUSION: We believe that our sliding growing rod technique is a new and updated surgical method that can be applied in these patient groups, facilitating the life, rehabilitation process, and daily care of MMC patients with lumbar kyphosis. This technique seems to be a safe and reliable method which preserves lung capacity and allows lengthening.
Assuntos
Cifose , Meningomielocele , Escoliose , Fusão Vertebral , Humanos , Pré-Escolar , Criança , Meningomielocele/complicações , Meningomielocele/diagnóstico por imagem , Meningomielocele/cirurgia , Estudos Retrospectivos , Cifose/diagnóstico por imagem , Cifose/etiologia , Cifose/cirurgia , Coluna Vertebral , Escoliose/complicações , Escoliose/diagnóstico por imagem , Resultado do Tratamento , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Fusão Vertebral/métodosRESUMO
We evaluated the effect of using a tourniquet on early-stage pain and 1-year postoperative functional outcomes when patients were divided into two groups according to the pain threshold (PT). Overall, 120 patients who were assessed preoperatively with an algometer were recruited for this prospective, double-blinded, randomized controlled trial. Patients were randomized to undergo total knee arthroplasty (TKA) with a tourniquet (group 1, 60 patients) and without tourniquet (group 2, 60 patients). Primary outcome measures were visual analog scale (VAS) pain scores at 24, 36, and 48 hours postoperatively and functional assessment with Knee Society Score (KSS) test at 1 year postoperatively. No significant differences were observed between groups in terms of gender (49 females and 8 males in group 1 vs. 53 females and 6 males in group 2; p = 0.201) and age (68.9 years in group 1 vs. 68.7 years in group 2; p = 0.811). There was no significant difference between groups in all the VAS and KSS 1 and KSS 2 scores. PT measurements ranged from 2.5 to 11.5 with a mean of 7.69 ± 1.70 and a median of 8. Total 54 patients with a median value of < 8 were defined as the low-PT group, and 62 patients with a median value of ≥ 8 were defined as the high-PT group. When the groups were evaluated according to using the tourniquet, 21 patients were operated on with a tourniquet and 33 patients without it in the low-PT group, while 36 patients were operated on with a tourniquet and 26 patients without it in the high-PT group. There was no significant difference in pain or functional scores between patients when comparing with-tourniquet and without-tourniquet or when comparing the low- and high-PT groups. This showed that the use of a tourniquet during TKA was not associated with either early-stage pain or 1-year postoperative functional outcomes according to algometer evaluation.Level of evidence: Level 1 prospective randomized study.
Assuntos
Artroplastia do Joelho , Masculino , Feminino , Humanos , Idoso , Artroplastia do Joelho/efeitos adversos , Limiar da Dor , Torniquetes/efeitos adversos , Estudos Prospectivos , Dor Pós-Operatória/etiologia , Resultado do Tratamento , Perda Sanguínea CirúrgicaRESUMO
BACKGROUND: There are various distal locking options for the repair of tibia distal diametaphyseal fractures with intramedullary nails. There is no consensus about the superiority of any of these distal locking options. In our study, comparing nails with distal bolt locking screw (DSBLS) and conventional nails; we aimed to compare the clinical and radiological results of intramedullary nail models in fixing tibial distal diametaphyseal fractures. METHODS: In our orthopedics and traumatology department, 117 tibial distal diametaphyseal fractures of 116 patients treated with intramedullary nails between August 2007 and May 2015 were retrospectively evaluated. Forty-six tibial distal diametaphyseal fractures of 45 patients who came to regular visits to outpatient clinic controls and who had a minimum follow-up of 18 months and whose fracture distance was between 3 and 12 cm were included in the study. The average follow-up period of the study group consisting of 28 males and 17 females with an average age of 44 (16-76 years) which was 48 months (18-100 months). The group using the DSBLS locking intramedullary nail was considered the first group and the group using the conventional distal locking intramedullary nail was considered the second group. Radiological union times, coronal, sagittal, and axial plan angulations and malunion presence were com-pared between the two groups. In addition, the two groups were compared clinically with length of time spent on weight-bearing and return to work, Olerud-Molander ankle score, and American Orthopedic Foot and Ankle Society Score scores. RESULTS: We found that the first group was superior in terms of length of time spent on partial and full weight-bearing between the two groups (p=0.00031 and p=0.00007). In addition, the union time of the first group was shorter (p=0.0149). Other radiological or clinical results did not differ significantly between the two groups. In addition, no significant correlation was found between the distance of the fracture from the tibial plate and its angulation. In cases with malunion alone, the fracture line was more distal than those without malunion (p=0.0411). CONCLUSION: Newly developed DSBLS intramedullary nails give as good results as conventional nails in tibia distal diametaphyseal fractures. Due to its ability to loading bone early and have a shorter union time, DSBLS can be safely preferred in distal diametaphyseal fractures and reduce complications from immobilization.
Assuntos
Fraturas do Tornozelo , Fixação Intramedular de Fraturas , Fraturas da Tíbia , Adulto , Pinos Ortopédicos , Feminino , Fixação Intramedular de Fraturas/métodos , Humanos , Masculino , Estudos Retrospectivos , Tíbia , Fraturas da Tíbia/diagnóstico por imagem , Fraturas da Tíbia/cirurgiaRESUMO
OBJECTIVE: Developmental dysplasia of the hip (DDH) is a disabling pathology leading to hip problems, such as painful arthritic hip, unstable hip, etc. Total hip arthroplasty (THA) is an effective treatment modality for this condition. Obesity has been shown to be associated with increased rates of complications following orthopaedic surgeries (Journal of Arthroplasty 20:46-50). The hypothesis of this study was that patients with a body mass index (BMI) greater than 30 (obese), who undergo total hip arthroplasty for dysplastic hip, are associated with longer operative and anaesthetic times, longer hospital stays and higher re-admission rates within 30 days. METHODS: All the cases of total hip arthroplasty in patients with high-riding dysplastic hips were reviewed. Evaluation was made of a total of 68 patients comprising 64 females and 4 males, classified into two groups. Patients with BMI < 30 kg/m2 formed the non-obese group and patients with BMI ≥ 30 kg/m2 the obese group. RESULTS: The mean age was 44.67 ± 6.49 years. BMI was < 30 in 44 (64.7%) patients and > 30 in 24 (35.3%) patients. The data analysis showed that mean surgical time, anaesthesia duration and re-admission rate were significantly higher in the group with BMI ≥ 30(obese) as compared to the group with BMI < 30 (non-obese) (p < 0.01). The complication rate was determined to be higher in the obese group (p < 0.05). CONCLUSION: Obese patients performed with total hip arthroplasty for high-riding dysplastic hips had more complications and higher rates of re-admission to hospital compared with the non-obese patients.
RESUMO
In this study, the analytical performance of bacteriophages for Salmonella Enteritidis was investigated using lateral flow assay (LFA) technique. The analytical performance characteristics of bacteriophages were compared with antibodies which are regularly used as analyte-specific agents in the lateral flow immunoassay test strip. Bacteriophages could be an alternative analyte-specific agents to antibodies in lateral flow assay testing of bacteria since they offer comparable sensitivity, specificity, and accuracy. In the present study, Surface Enhanced Raman Spectroscopy (SERS) and colorimetric measurements were combined in one platform and sensitive quantitation of target bacteria was accomplished with a total quantitative analysis time of less than 30 min. The developed Salmonella Enteritidis F5-4 phage-based LFA specifically responds to Salmonella Enteritidis, while lower SERS responses to different bacteria types including Bacillus subtilis, Micrococcus luteus, Escherichia coli, Salmonella Typhimurium were observed. The developed test strips were also applied for the determination of Salmonella Enteritidis in spiked chicken and egg samples.
Assuntos
Bacteriófagos , Técnicas Biossensoriais , Imunoensaio , Salmonella enteritidis , Salmonella typhimuriumRESUMO
PURPOSE: In this study, we aimed to present our clinical and functional results of distal tibial dia-metaphyseal fractures treated with an intramedullary nail that locks distally with an innovative distal locking system called a distal supportive bolt locking screw (DSBLS). METHODS: Forty-eight patients with distal tibia dia-metaphyseal fractures operated with IMNs distally locked with DSLBS in a level I trauma center were included. Inclusion criteria were fractures of the distal tibia at one-third the distal segment level with simple articular involvement. Functional and radiological assessments were made after at least 14 s. Results were evaluated according to the Johner and Wruhs criteria. The quality of the initial alignment and during follow-ups, malunion, nonunion, and any other complications were evaluated. Technical problems during interventions and implant failures during follow-ups were assessed. RESULTS: All fractures achieved union. The average healing duration was a mean of 17.4 (8-24) weeks. Initial fixation in the recurvatum between 5° and 10° was detected in six patients. No loss during initial reduction was detected during the follow-up of any patient. According to the Johner and Wruhs criteria, 42 patients were functionally evaluated as excellent and six were evaluated as good. No loosening, migration, or breakage of the DSLBS were observed in any patient. CONCLUSION: The DSBLS provided a stable anchor point for the nail even for very short metaphyseal fragments. It prevented rotation and angulation in both the coronal and sagittal planes without preventing compression, which is mandatory for early weight bearing and bone union.
Assuntos
Fixação Intramedular de Fraturas , Fraturas da Tíbia , Pinos Ortopédicos , Humanos , Estudos Retrospectivos , Tíbia , Fraturas da Tíbia/diagnóstico por imagem , Fraturas da Tíbia/cirurgia , Resultado do TratamentoRESUMO
BACKGROUND: The aim of this study was to present clinical and radiological results of myelomeningocele (MMC) patients treated with the sliding growing rod (SGR) technique after kyphectomy. METHODS: Between 2016 and 2019, 30 patients (21 males and nine females) who underwent the SGR technique with kyphectomy and posterior instrumentation due to MMC were retrospectively reviewed. Patients' pre- and postoperative kyphosis, scoliosis, correction rates, bleeding during surgery, blood supply during and after surgery, operation time, instrumentation levels, number of vertebrae removed, MMC onset levels, hospital stay, annual lengthening amounts, and complications were evaluated. RESULTS: The mean patient age was 6.9 (4-10) years. Mean preoperative kyphosis was 115° (87-166°), mean early postoperative kyphosis was 3.9° (20-10°), and final follow-up postoperative kyphosis was 5.1° (22-8°). In nine patients presenting with scoliosis, scoliosis was evaluated as 60.2° (115-35°) preoperative, as 12.9° (32-0°) early postoperative, and 15.7° (34-0°) in the final measurement. The kyphotic deformity correction rate was 96.5%, and the scoliotic deformity correction rate was 74.9%. A statistically significant difference was seen between pre- and early postoperative values in kyphosis and scoliosis measurements (p < 0.05). The annual prolongation of the patients was calculated as averages of 0.72 and 0.77 cm/year between T1-T12 and T1-S1, respectively. CONCLUSION: Kyphectomy performed during the early MMC period patients appears to be an excellent method for facilitating rehabilitation and daily care of these patients. It appears that the SGR technique, which provides lung volume protection and lengthening with kyphectomy, is a safe and reliable method in patients. LEVEL OF EVIDENCE: Level 4.
Assuntos
Cifose/cirurgia , Meningomielocele/diagnóstico por imagem , Meningomielocele/cirurgia , Dispositivos de Fixação Ortopédica , Escoliose/cirurgia , Fusão Vertebral/instrumentação , Fusão Vertebral/métodos , Fatores Etários , Criança , Pré-Escolar , Feminino , Humanos , Cifose/etiologia , Medidas de Volume Pulmonar , Masculino , Meningomielocele/complicações , Parafusos Pediculares , Complicações Pós-Operatórias/etiologia , Radiografia , Estudos Retrospectivos , Escoliose/etiologia , Resultado do TratamentoRESUMO
In this study, we present a disposable and inexpensive paper-like gold nanoparticle-embedded cellulose nanofibril substrate for the rapid enumeration of Escherichia coli (E. coli) using surface-enhanced Raman scattering (SERS) mapping. A disposable SERS substrate was simply constructed by mixing CNF and gold chloride solution at 120 °C in a water bath. The application of the resulting substrate was carried out by enrichment and SERS detection of E. coli. To this end, the spherical gold nanoparticle-embedded cellulose nanofibril substrate was used as a scavenger for E. coli. After the target bacteria E. coli were separated from the matrix via oriented antibodies, the sandwich assay procedure was carried out using 5,5-dithiobis-(2-nitrobenzoic acid) (DTNB)-coated Au nanorod particles that acted as SERS mapping probes. The distribution density of DTNB was demonstrated visually using SERS mapping, and the assay was completed in one hour. The correlation between the E. coli and SERS mapping signals was found to be linear within the range of 15 cfu mL-1 to 1.5 × 105 cfu mL-1. The limit of detection for the SERS mapping assay was determined to be 2 cfu mL-1. The selectivity of the developed method was examined with Micrococcus luteus (M. luteus), Bacillus subtilis (B. subtilis), and Enterobacter aerogenes (E. aerogenes), which did not produce any significant response. Furthermore, the developed method was evaluated for detecting E. coli in artificially contaminated samples, and the results were compared with those of the plate-counting method.
RESUMO
Background/aim: Quorum sensing (QS) is a chemical communication process that bacteria use to regulate virulence. Inhibition of QS (antiQS) overcomes the pathogenicity of bacteria. Silver nanoparticles (AgNPs) have been used as antimicrobials against pathogens, but have not been used against QS-mediated bacterial infection. Also, studies have been carried out on the inhibitory effects of propolis based structures on pathogen growth, but no studies have been found on their potential use as QS inhibitor. The present study aims to investigate the synthesis and characterization of silver nanoparticles (AgNPs) reduced with propolis extract (PAgNPs) and evaluation of their antimicrobial and, for the first time, antiQS activity. Materials and methods: PAgNPs were synthesized using with different volumes (1, 2.5 and 5 mL) of propolis extract (PE) by biological method via reduction of silver nitrate. Synthesized PAgNPs were characterized in terms of hydrodynamic, chemical, morphological, physical, and antioxidant properties. Disc diffusion and flask incubation assays were used to evaluate the antimicrobial effect against Gramnegative bacteria (Escherichia coli, Proteus mirabilis,Proteus vulgaris,Salmonella typhimurium, Enterobacter aerogenes, Pseudomonas aeruginosa) and Grampositive bacteria (Staphylococcus aureus, Streptococcus mutans, Bacillus thuringiensis) and QSregulated biofilm activity against biosensor strain Chromobacterium violaceum CV026. Results: AgNPs were successfully synthesized by biological method via PE. The violacein pigment production based on the QS system was greatly inhibited by the PAgNPs (inhibition zones: 16.22-21.48 mm and violacein inhibition: 63.16 ± 2.4-75.24 ± 3.5 %) without interfering with the growth of bacteria, which is the first report on the antiQS effect of PAgNPs. Conclusion: Our results suggest that PAgNPs may be potentially used to inhibit bacterial physiological processes due to the signal molecules regulates important collective behavior of bacteria. The development of such nontoxic biomaterials may have great potential to evaluate for the new medicinal substance that inhibits the pathogenic biofilms.
Assuntos
Bactérias/efeitos dos fármacos , Nanopartículas Metálicas , Própole/química , Própole/farmacologia , Percepção de Quorum/efeitos dos fármacos , Prata/química , Prata/farmacologia , Antibacterianos/síntese química , Antibacterianos/farmacologia , Biofilmes/efeitos dos fármacos , Virulência/efeitos dos fármacosRESUMO
Background/aim: Forensic medicine and sciences is a multidisciplinary branch of science, which frequently benefit from novel technologies. State of the art omics technologies have begun to be performed in forensic medicine and sciences, particularly in postmortem interval, intoxication, drugs of abuse, diagnosis of diseases and cause of death. This review aims to discuss the role and use of great omics (metabolomics, proteomics, genomics and transcriptomics) in forensic sciences, in detail. Materials and methods: A detailed review of related literature was performed, and studies were subdivided as per the type of omics. Results and conclusion: Omics seems as a revolutionary step in forensic science and sure carries it towards a new age. The number of forensic studies utilizing omics steadily increases in last years. Omics strategies should be used together in order to gather more accurate and certain data. Additional studies need to be performed to incorporate omics into routine forensic methodology.
Assuntos
Biologia Computacional , Medicina Legal , Perfilação da Expressão Gênica , Animais , Autopsia , Biomarcadores/sangue , Biomarcadores/urina , Humanos , Detecção do Abuso de SubstânciasRESUMO
Background/aim: Due to nanomaterials' potential benefits for diagnosis and treatment, they are widely used in medical applications and personal care products. Interaction of nanomaterials, which are very small in size, with tissue, cell and microenvironment, can reveal harmful effects that cannot be created with chemically identical and larger counterparts in biological organisms. In this review, a challenge for future medicine, nanotoxicity of nanomaterials is discussed. Materials and methods: A detailed review of related literature was performed and evaluated as per medical applications of nanomaterials their toxicity. Results and conclusion: Most authors state "the only valid technology will be nanotechnology in the next era"; however, there is no consensus on the impact of this technology on humankind, environment and ecological balance. Studies dealing with the toxic effect of nanomaterials on human health have also varied with developing technology. Nanotoxicology studies such as in vivo-like on 3D human organs, cells, advanced genetic studies, and -omic approaches begin to replace conventional methods. Nanotoxicity and adverse effects of nanomaterials in exposed producers, industry workers, and patients make nanomaterials a double-edged sword for future medicine. In order to control and tackle related risks, regulation and legislations should be implemented, and researchers have to conduct joint multidisciplinary studies in various fields of medical sciences, nanotechnology, nanomedicine, and biomedical engineering.
Assuntos
Nanoestruturas/toxicidade , Animais , Humanos , Avaliação da Tecnologia BiomédicaRESUMO
Background/aim: DNA nanostructures have many advantages over polymers and lipid based drug delivery agents such as biodegradability and biocompatibility. However their transfection rates and stability still limit their widely use in nanomedicine. In this study highly versatile and straightforward albumin coating preparation method is showed for DNA nanostructures. Materials and methods: N-methylolmaleimide was esterified with a-bromoisobutyrl bromide (BiBB) to achive bromine functional structure. Then it was attached to bovine serum albumin (BSA) via cysteine-maleimide bond further to use as macroinitiator for atom transfer radical polymerization (ATRP). Cationic polymers can be synthesized from this end further to use as binding domain for fabricated 60 Helix bundle DNA origami. Results: Proton nuclear magnetic resonance (1H NMR) analysis used for characterization. Methyelene group hydrogens' peak in 5.0 ppm and strong peak in 1.52.0 ppm range showed proper methylolation of maleimide and bromine functional formation, respectively. Then BSA-macroinitiator formation is verified by 1780 Da peak shift in MALDI-TOF (Matrix-assisted laser desorption/ionization - time of flight) spectrum. Moreover electrophoretic mobility shift assay (EMSA) showed successful dense 60 Helix bundle formation. Conclusion: In this study, a facile method is developed to synthesize protein conjugated-ATRP initiator further can be used in polymerization and coating DNA nanostructures. It is feasible for any protein containing cysteine amino acid.
Assuntos
Albuminas/química , Materiais Revestidos Biocompatíveis/química , DNA , Polímeros/química , DNA/química , DNA/ultraestrutura , Sistemas de Liberação de Medicamentos , Nanotecnologia , Polimerização , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por MatrizRESUMO
Background/aim: Bone tumor is one of the major causes of tissue bone loss, particularly after performing surgical excision operation to bone lesion that needs to be replaced by biomaterials and ensure a complete filling of tissue-loss spaces. The purpose of our study was to produce a nanofiber-based bone graft scaffold to fill the gaps resulted from bone cancer treatment and also capable of carrying functional molecules that can play a major role in preventing further cancer growth at the targeted bone tissue. Materials and methods: Electrospinning method was used in order to produce nanofibers from different kinds of polymers; Hyaluronic acid (HA), Polyethylene oxide (PEO) and Polyvinyl alcohol (PVA) blended with different concentrations of herbal antibiotic and anti cancer flavonoid molecules called Baicalein (BE). The morphological and chemical structures of scaffold samples were studied using Scanning Electron Microscope (SEM), Fourier Transform Infrared-spectroscopy (FT-IR) and Surface-enhanced Raman spectroscopy (SERS) Analysis. Results: The results showed production of homogenous nanofibers-based scaffold (diameter between 80 nm and 470 nm) that contains the polymers used in the spinning process and the entrapped Baicalein molecules within the nanofiber structure. Conclusion: It was concluded that successful formation of bone tissue mimicking scaffold can be achieved by using Electrospinning method that produces nonwoven nanofibers and at the same time can hold functional anticancer agent such as Baicalein, which may allow using these types of scaffold in bone cancer treatment procedures.
Assuntos
Substitutos Ósseos/química , Flavanonas/química , Ácido Hialurônico/química , Nanofibras/química , Álcool de Polivinil/química , Antibacterianos/química , Transplante Ósseo , Microscopia Eletrônica de Varredura , Polietilenoglicóis/química , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral Raman , Alicerces TeciduaisRESUMO
Background: Heroin can be detected and quantified by certain analytical methods, however, forensic professionals and criminal laboratories study for cheaper and faster detection tools. Surface-enhanced Raman spectroscopy (SERS) rises as a possible alternative tool with its widening application spectra. There are few studies regarding Raman and SERS spectra of heroin and its metabolites, which are unfortunately controversial. In this study, we compared five different surfaces in order to find out more efficient Raman-active substrate for opiate detection and rapid quantification of heroin and its metabolites in saliva. Materials and methods: Morphine standard material was used to identify proper surface for SERS analysis of opiates. Heroin and its metabolites (morphine, morphine-3-ß-glucuronide and 6-monoacetyl morphine) were calibrated between 50 ppb and 500 ppm and quantified on AuNRs with signal enhancement of silver colloids in saliva. Raman microscope with a 785-nm laser source was used. Results and Conclusion: Obtained results showed that heroin and its metabolites can be detected and quantified in saliva samples using a SERS-based system. Additionally, the present study revealed that synergetic effect of a specific gold nano-surface with ability controlling liquid motion and silver nanoparticles increase band numbers and intensities. Therefore, we suggest a fast, accurate and cost-effective method to detect and quantify heroin in biological fluids
Assuntos
Heroína/análise , Saliva/química , Análise Espectral Raman/métodos , Adulto , Ouro/química , Humanos , Nanopartículas Metálicas/química , Morfina/análise , Prata/químicaRESUMO
In this study, we have reported a novel wastewater treatment technique by phenol imprinted bacterial cellulose (BC-MIP) nanofibres with high specificity and adsorption capacity. N-methacryloyl-(L) phenylalanine methyl ester (MAPA) functional monomer was used to create specific binding sites for the template molecule phenol via electrostatic and hydrophobic interactions. BC-MIP nanofibres were synthesized by surface imprinting approach in the presence of different amounts of total monomer (% weight), monomer/template ratio and polymerization time. Then, the nanofibres were characterized by FTIR-ATR, surface area analysis (BET), elemental analysis, scanning electron microscopy (SEM) and contact angle measurements. Adsorption studies were performed with respect to pH, temperature and ionic strength, and the adsorption capacity was calculated by using the spectrophotometer. In order to desorb the adsorbed phenol from BC-MIP nanofibres, 0.1â M NaCl solution was used. Besides, BC-MIP nanofibres were applied to real wastewater samples from Ergene basin in Turkey. The suitable equilibrium isotherm was determined as Langmuir isotherm. To evaluate the selectivity of the BC-MIP nanofibres, similar molecules were utilized as competitor molecules, which were 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol. Electrostatic interactions were found to contribute to the generation of specific recognition binding sites. The results have shown that imprinting of phenol was achieved successfully with high adsorption capacity. The phenol removal efficiency was reported up to 97%. BC-MIP nanofibres were used 10 times with a negligible decrease in adsorption capacity.
Assuntos
Impressão Molecular , Nanofibras , Adsorção , Celulose , Fenol , Fenóis , Polímeros , Turquia , Águas ResiduáriasRESUMO
The phase change behavior of vanadium dioxide (VO2) has been widely explored in a variety of optical and photonic applications. Commonly, its optical parameters have been studied in two extreme regimes: hot (metallic) and cold (insulating) states. However, in the transition temperatures, VO2 acts like an inherent metamaterial with mixed metallic-insulating character. In this range, the portions of metallic and insulating inclusions are tuned by temperature, and therefore a gradual change of optical parameters can be achieved. In this paper, a universal hybrid modeling approach is developed to model VO2 in the intermediate region. For this aim, the measured reflectivity data, is analyzed and matched through the transfer matrix method (TMM) simulations where an effective medium theory (EMT) is employed. Based on the findings of this approach, not only the relative portions of inclusions are tailored but also their grain shapes are significantly altered in the transition range. Finally, the modeling approach is testified by experimental findings through dynamic device applications operating at short and mid infrared wavelengths. In addition, the hysteretic behaviors on electrical, optical, and structural parameters of the VO2 film along the heating and cooling cycles are demonstrated by the experiments and scrutinized by the simulations.
RESUMO
Quorum sensing (QS) and biofilm formation are important mechanisms related to antibiotic resistance of many pathogens. Alternative treatments are needed to prevent recurrent or chronic infections caused by multi-resistant pathogens. Therefore, the aim of this study is to investigate and compare the inhibitory potential of the dietary phytochemicals: curcumin, quercetin, apigenin, pyrogallol, gallic acid and luteolin against QS of and biofilm formation by Chromobacterium violaceum ATCC 12472 and the swimming and swarming abilities of Pseudomonas aeruginosa PAO1. Anti-QS potential of the phytochemicals was evaluated qualitatively and quantitatively using C. violaceum via the disk diffusion assay based on violacein pigment inhibition at the subminimal inhibitory concentrations ranging from 46.87 to 750 µg/mL. The results of anti-QS and antibiofilm activities on C. violaceum demonstrated that all the phytochemicals except pyrogallol and gallic acid inhibited violacein production (from (11.0±0.1) to (88.2±0.1) %) in a concentration-dependent manner. In addition, the biofilm formation was also significantly inhibited (p<0.05) in the presence of all the phytochemicals ((1.38±0.08)-(84.2±0.2) %). In the present study, the results revealed that quercetin, curcumin, apigenin and luteolin could be promising QS and biofilm inhibitory agents against the C. violaceum 12472 biosensor system. Our findings also suggest that all the phytochemicals, especially curcumin, quercetin and pyrogallol, might be anti-pathogenic agents against P. aeruginosa PAO1 infections due to the ability to control QS. However, more comprehensive studies at the molecular level, explaining their anti-QS mechanisms, need to be conducted to confirm these results and identify the genes involved.
RESUMO
INTRODUCTION: Efforts to prevent iatrogenic neurovascular injuries with humeral intramedullary nailing lead to design new implants and inside to out distal locking technique using an endopin aims to provide a safer screw application. InSafeLock (TST, Istanbul, Turkey) humeral nail have been recently developed to minimize the possible screw related complications. The anatomical relationship between locking screws and neurovascular structures with the application time were compared between Trigen Humeral Nail (Smith and Nephew, Memphis, USA) and InSafeLock Humeral Nail. HYPOTHESIS: InSafeLock humeral nail would be safer than Trigen Humeral nail in terms of neurovascular injury. MATERIALS AND METHODS: Seven cadavers were used with both shoulders and surgical application of two nails was performed as the manufacturer guide. An Insafelock humeral nail was used for each right humerus and a Trigen humeral nail was used for each left humerus. Once the nails were placed, proximal and distal region of the nails were dissected to evaluate the relationship between screws and adjacent anatomical structures. The duration of the each screw was assessed via a stopwatch. RESULTS: No significant finding was noted for the relationship between the neurovascular structures and proximal screws in two groups (p<0.05). The distal locking of the InSafeLock humerus nail had a shorter application time and no neurovascular damage was recorded. DISCUSSION: The newly developed Insafelock humerus nails are at least as safe and effective as current humeral nails available on the market. Additional benefits include the preservation of neurovascular structures, as the Insafelock humerus nail does not require the use of an extra incision. Furthermore, surgical time is significantly shorter with using distal endopin. LEVEL OF STUDY: III, controlled laboratory study.