Robust predictive control strategy of SCIG-based drive system.

This article presents a robust finite control set predictive scheme for a stand-alone squirrel cage induction generator (SCIG) drive. This technique is considered an alternative to the drive system due to the inclusion of system nonlinearities and fast dynamic response. The control objective in the distributed generation environment is to fix the output voltage to follow the stand-alone requirement. The strategy establishes optimized switching instants for cost function minimization for both source and load converter control and diminished cross-coupling amid active and reactive power during transient scenarios. The scheme is designed to achieve the minimal effect caused by the parameter uncertainties. During source and load changes, this work will also address the maintenance of dc-link voltage, machine, and load variables at the set value, supported by machine and load-end converter control to achieve stand-alone load objectives. In addition, the presented scheme is also tested with random variation of speed to check the efficacy of the control configuration. The drive performance is evaluated by simulation using MATLAB/Simulink environment. Comprehensive real-time findings obtained from a scaled laboratory test bench using dSPACE-1104 are provided to verify the feasibility of the predictive solution.

Multilevel hysteresis modulation (MHM) for sliding mode controlled dual inverter PV systems.

In this article, proposes an adaptive multiband hysteresis modulation and its characterization based on a robust nonlinear sliding-mode control (RNSMC) strategy of a dual two-level inverter topologies for photovoltaic (PV) system subject to robust and fast-tracking characteristics and external disturbance rejection. Using the RNSMC based novel, vector control schemes are designed and implemented to improve its robustness and against the rejection of external disturbances. The control scheme ensures the active power is stable across the whole operation of the PV systems (standalone and grid-connected). The reachability and stability analysis are obtaining the robustness of the controller. Tsypkin's method is used to realize the switching frequency characterization. The development and implementation approach of the proposed control strategy is thoroughly detailed, and its effectiveness is validated on the simulation and real-time laboratory tests. Moreover, the proposed scheme is superior in keeping the enhanced efficiency, multilevel voltage waveforms, and total harmonic distortion (THD) reduction in current within the necessary standard limitations even under different operating conditions.