Tracer-Gas-Integrated Measurements of Brake-Wear Particulate Matter Emissions from Heavy-Duty Vehicles.

Automotive brake-wear emissions are increasingly important in on-road particulate matter (PM) emission inventory. Previous studies reported a high level of PM emissions from the friction materials of light/medium-duty vehicles, but there are few data available from heavy-duty (HD) vehicles equipped with drum brakes despite their popularity (∼85% in HD vehicle fleet). This study developed a novel tracer-gas-integrated method for brake-wear PM emission measurements and evaluated four HD vehicles on a chassis dynamometer that complied with regulatory exhaust emission testing requirements. Three class-6 vehicles with a similar test weight demonstrated repeatability, with the coefficient of variation in the range of 9-36%. Braking events increased PM concentrations by 3 orders of magnitude above the background level. Resuspension of brake-wear PM also occurred during acceleration and contributed to 8-31% of the total PM2.5 mass. The class-6 vehicles had PM2.5 emissions from a single brake (0.7-1.5 mg/km/brake), generally similar to the level of tail-pipe exhaust PM emissions (0.7-1.5 mg/km/vehicle) of each vehicle. A class-8 vehicle exhibited brake-wear PM2.5 emissions (2.4-3.4 mg/km/brake) significantly higher than the tail-pipe exhaust PM emissions (∼1.3 mg/km/vehicle). This article reports an exceptionally high level of brake-wear PM emissions measured directly from the drum brakes of HD vehicles.

Evaluation of catalyzed and electrically heated filters for removal of particulate emissions from diesel-A- and JP-8-fueled engines.

In-service diesel engines are a significant source of particulate matter (PM) emissions, and they have been subjected to increasingly strict emissions standards. Consequently, the wide-scale use of some type of particulate filter is expected. This study evaluated the effect of an Engelhard catalyzed soot filter (CSF) and a Rypos electrically heated soot filter on the emissions from in-service diesel engines in terms of PM mass, black carbon concentration, particle-bound polycyclic aromatic hydrocarbon concentration, and size distribution. Both filters capture PM. The CSF relies on the engine's exhaust to reach the catalyst regeneration temperature and oxidize soot, whereas the electrically heated filter contains a heating element to oxidize soot. The filters were installed on several military diesel engines. Particle concentrations and compositions were measured before and after installation of the filter and again after several months of operation. Generally, the CSF removed at least 90% of total PM, and the removal efficiency improved or remained constant after several months of operation. In contrast, the electrical filters removed 44-69% of PM mass. In addition to evaluating the soot filters, the sampling team also compared the results of several real-time particle measurement instruments to traditional filter measurements of total mass.