RESUMO
In line with the renewed interest in developing novel Non Linear Optical (NLO) materials, natural Lycopene's NLO Properties are reported for the first time within the scientific literature. Correlated to its 1-D conjugated π-electrons linear conformation, it is shown that natural Lycopene exhibits a significantly elevated 3rd order nonlinearity χ(3) as high as 2.65 10-6 esu, the largest value of any investigated natural phyto-compound so far, including ß-carotene. In addition to a saturable absorption, the corresponding observed self-defocusing effect in Lycopene seems to be the result of a thermal nonlinearity. The nonlinear response coupled to the observed fluorescence in the Visible spectral range points to a potential photodynamic therapy application as well as the possibility of engineering of novel hybrid Lycopene based NLO nano-materials.
Assuntos
Solanum lycopersicum , Licopeno , Conformação Molecular , beta CarotenoRESUMO
The molecular engineering of organometallic complexes has recently attracted renewed interest on account of their potential technological applications for optoelectronics in general and optical data storage. The transition metal which induces control of enhanced nonlinear optical properties of functionalized organometallic complexes versus not only the intensity but also the polarization of the incident laser beam is original and important for all optical switching. This makes organometallic complexes valuable and suitable candidates for nonlinear optical applications. In the present work, we report the synthesis and full characterization of four organometallic complexes consisting of N, N-dibutylamine and azobenzene fragments but differ by auxiliary alkynyl ligands or metal cations. Thus, a ferrocenyl derivative 1 and three ruthenium complexes 2-4 have been prepared. The nonlinear optical properties of the four new azo-based ruthenium and iron organometallic complexes in the solid state, using polymethylmethacrylate as matrix, have been thoroughly studied. This concept is extended to computing the HOMO and LUMO energy levels of the considered complexes, dipole moment, first and second order hyperpolarizabilities using the 6-31 + G(d,p) + LANL2DZ mixed basis set. The second and third nonlinear optical properties of the resulting polymer composites were obtained by measuring SHG and THG response by means of the Maker fringe technique using a laser generating at 1,064 nm with a 30 ps pulse duration. The values of the second and third order NLO susceptibilities of the four organometallic complexes were found to be higher than the common references used. Theoretical calculation shows that the large first and second order hyperpolarizablities are caused by strong intramolecular charge transfer between the transition metal parts and the ligands though a conjugated transmitter. These results indicate that the present organometallic complexes are valuable candidates for optoelectronic and photonic applications.
RESUMO
In this paper we present results of experiments designed to increase our understanding of the photorefractive effect occurring during processes of dynamic hologram generation in Hybrid Photorefractive Liquid Crystal Structures (HPLCS). We also propose equivalent mathematical model which can be used to optimize those structures in order to obtain the highest diffraction efficiency in possibly shortest time.
Assuntos
Cristais Líquidos/química , Modelos Químicos , Refratometria/instrumentação , Simulação por Computador , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
Materials for optical data storage and optical information processing must exhibit good holographic properties. Many materials for these applications have been already proposed. Here we describe a grating inscription process characterized by short inscription time and long-time stability. A series of ruthenium-acetylide organometallic complexes containing an azobenzene fragment were synthesized. Photo-induced gratings were produced by short pulse (16 ps, 532 nm) laser irradiation. The surface relief gratings formed at the same time were observed by atomic force microscope. In this work, we highlight the short inscription times brought into play as well as the good temporal stability of these gratings stored at room temperature. We study the influence of the polarization states and the light intensity of writing beams on the dynamics of the surface relief gratings formation and we compare these results with those of a known representative of azobenzene derivative (Disperse Red 1). Lastly, we show that it is possible to write two-dimensional surface relief gratings.
RESUMO
Theoretical simulation of UV-vis absorption for a new series of alkynyl ruthenium chromophores spectra and investigations the influence of anionic substituence on a spectral shift of UV absorption was presented. The MM(+) molecular force field method was used for total energy minimization and for building of the molecular optimized geometry [S.J. Weiner, P.A. Kollman, D.A. Case, U.C. Ghio, G. Alagona, J.S. Profeta, P. Weiner, J. Am. Chem. Soc. 106 (1984) 765; S.J. Weiner, P.A. Kollman, D.T. Nguyen, D.A. Case, J. Comput. Chem. 7 (1986) 230]. All quantum chemical calculations were performed by semi-empirical ZINDO/1 method within a framework of the restricted Hartree-Fock approach and convergence limit up to 10(-6)eV after 500 iterations was achieved. Good agreement between the theoretically calculated and experimentally measured spectra was observed. The largest spectral shift in position of absorption peaks was observed for compound containing the anionic (Cl), substituent. The theoretically calculated absorption maximum is blue shifted with respect to the experimental spectra for all compounds what is connected with the changes of the charge transfer determining the corresponding state dipole moments. Analysis of the theoretical spectra shows a substantial sensitivity to the backside groups.
Assuntos
Corantes/química , Rutênio/química , Simulação por Computador , Modelos Químicos , Espectrofotometria Ultravioleta , Eletricidade EstáticaRESUMO
Polymers containing azo-benzene groups are useful holographic recording materials. In these materials the efficient mixed amplitude and phase gratings, frequently accompanied with photoinduced-surface relief gratings, can be inscribed with polarized laser light. The light-induced trans-cis-trans photoisomerization of azo-benzene groups is responsible for optical anisotropy in such systems. The aim of the present work is to study the dynamics of grating inscription in Disperse Red 1 doped deoxyrbonucleic acid- hexadecyltrimethylammonium material (DR1-DNACTMA) using 16 ps laser pulses (532 nm, 1.3 mJ). Results are compared with that obtained for other polymeric matrices loaded with DR1. The dynamics of the grating growth, due to repeated pulses from picosecond laser with 10 Hz repetition rate, was probed by measuring the intensity of the first order of diffraction of a cw He-Ne. We report results in function of the light polarization of writing beams. In this paper we present the first results of the grating inscription in functionalized DNA (in the picosecond pulse regime).
RESUMO
It has been revealed that lanthanum calcium borate (La2CaB10O19) crystals show two-photon absorption (TPA) induced by a UV laser field. UV-induced TPA measurements were performed in the spectral range of 475-1130 nm using as fundamental beam the third harmonics of the 28 ps Nd-YAG pulsed laser as a pumping beam for LiB3O5 optical parametrized generator using Z-scan method. Investigations performed by the Z-scan method were done during illumination by a Xe-F laser (lambda = 217 nm) as a photoinducing (pumping) beam. The pumping laser beam created a thin surface layer (about 80-90 nm) that was the source of the observed photoinduced TPA. The highest values of the TPA beta coefficients were achieved for polarization of the pumping light directed along the second-order crystallographic axis of the investigated crystals. The obtained values of the TPA coefficients were higher than those for the BiB3O6 crystals investigated earlier by us.
RESUMO
We have found experimentally the IR-induced second harmonic generation (SHG) in glasses possessing different degrees of electron-phonon interactions. For the investigations, we have chosen As(1)(-)(x)()Bi(x)Te(3)-CaBr(2)-PbBr(2) (0 < x <1) glasses. General formalism is based on consideration of fifth-order nonlinear optical susceptibility. The effect is observed in the middle IR region (spectral range 0.92-10.5 microm) where the value of the electronic energy gap is commensurable to the energies of actual quasi-phonons participating in the anharmonic (non-centrosymmetric) electron-phonon interactions. Varying the As/Bi ratio allows us to operate by the degree of electron-phonon anharmonicity in a wide spectral range. The second harmonic generation (SHG) output signal shows a correlation with IR-induced anharmonic phonon modes within the 1.5-4.8 microm spectral range. A maximum value of SHG is achieved at pump-probe delaying times of about 12.5-20 ps, which are typical for relaxation of the anharmonic electron-quasi-phonon subsystem. The maximally achieved value of the phonon-assisted optical susceptibility was about 6 x 10(-38) m(4)/V(4). The SHG signal was saturated for the IR pump power densities of about 1.73 GW/cm(2), corresponding to output SHG signals of about 9.8 x 10(-4) with respect to the fundamental ones. By varying the degree of electron-phonon anharmonicity and changing content of glasses, it was unambiguously shown that the IR-induced SHG signal correlates well with changes of oscillator strengths of IR-induced anharmonic phonon modes.
RESUMO
We have revealed a substantial enhancement of third-order optical figure of merits by the synthesis of a compact molecule possessing the tetrathiafulvalene (TTF) group with two backside C=O groups. Addition of the saturated methylene chain substantially suppresses the third-order optical figure of merits and even local optical hyperpolarizabilities at lambda = 532 nm. Another TTF-derivative molecule possessing ethylenic and acetylenic chains demonstrates large hyperpolarizabilities; however, generally, the figure of merit factor decreases due to the increasing optical losses as a consequence of enhanced linear absorption. At the same time, both of the chromophores have a large nonlinear optical response. General approaches for search and design of the third-order optical materials with improved properties are given.
RESUMO
A series of extended tetrathiafulvalene (TTF) derivatives bearing one or two 1,4-dithiafulven-6-yl substitutents has been prepared. The new compounds present remarkable electrochemical singularities compared with other TTF derivatives, which are strongly affected by the nature of the substitution on the lateral heterocycle(s). This unusual electrochemical behaviour follows a square-scheme sequence and is attributed to structural changes upon oxidation of the pi-donating molecules. Digital simulations of the electrochemical data have been used to reach the values of the kinetic and thermodynamic constants involved in the square scheme. Theoretical calculations establish an important contribution of a highly delocalised resonant form involving a tetravalent sulphur in oxidised species, which could justify the occurrence of an electrochemical behaviour distinct from that of TTF. Finally, third-order susceptibilities chi 3 of two of these systems, for which electron-donating and electron-withdrawing substituents coexist and are conjugated through the TTF pi system, are given.
RESUMO
We report large third-order nonlinear optical susceptibilities (?3?)(ijkl) of new tetrathiafulvalene derivatives, using the degenerate four-wave mixing (DFWM) method. To understand the physical nature of the optical nonlinearities, we separate their electronic and nuclear contributions. The electronic contribution to the third-order nonlinear optical susceptibilities of the molecules turns out to be dominant. From DFWM measurements we also deduce the values of the second-order hyperpolarizabilities gamma, which are ~10(5) greater than the gamma value of CS(2).