Structural Transition with a Sharp Change in the Electrical Resistivity and Spin-Orbit Mott Insulating State in a Rhenium Oxide, Sr3Re2O9.

We report the successful synthesis, crystal structure, and electrical properties of Sr3Re2O9, which contains Re6+ with the 5d1 configuration. This compound is isostructural with Ba3Re2O9 and shows a first-order structural phase transition at ∼370 K. The low-temperature (LT) phase crystallizes in a hettotype structure of Ba3Re2O9, which is different from that of the LT phase of Sr3W2O9, suggesting that the electronic state of Re6+ plays an important role in determining the crystal structure of the LT phase. The structural transition is accompanied by a sharp change in the electrical resistivity. This is likely a metal-insulator transition, as suggested by the electronic band calculation and magnetic susceptibility. In the LT phase, the ReO6 octahedra are rotated in a pseudo-a0a0a+ manner in Glazer notation, which corresponds to C-type orbital ordering. Paramagnetic dipole moments were confirmed to exist in the LT phase by muon spin rotation and relaxation measurements. However, the dipole moments shrink greatly because of the strong spin-orbit coupling in the Re ions. Thus, the electronic state of the LT phase corresponds to a Mott insulating state with strong spin-orbit interactions at the Re sites.

Contrasting Pressure-Induced Metallization Processes in Layered Perovskites, α-Sr_{2}MO_{4} (M=V, Cr).

Electric resistivity, magnetic susceptibility, and x-ray diffraction measurements under high pressure are performed in both α-Sr_{2}VO_{4} and α-Sr_{2}CrO_{4}, which are carefully prepared with regard to their stoichiometry. These measurements reveal contrasting and peculiar metallization processes of these compounds with increasing pressure. In contrast to a previously reported one in a V compound, we find two kinds of pressure-induced metallic states at low- (T<50 K) and high-temperature (T>100 K) regions. The high-temperature one seems to emerge beyond the pressure-induced Mott transition. The low-temperature one might imply a topological nature of the V compound, which is expected in the spin-orbit coupled 3d^{1} state that arises from their degenerated d_{zx} and d_{yz} orbits.

A Spin-Active, Electrochromic, Solvent-Free Molecular Liquid Based on Double-Decker Lutetium Phthalocyanine Bearing Long Branched Alkyl Chains.

Synthesis and characterization of a novel, multifunctional, solvent-free room-temperature liquid based on alkylated double-decker lutetium(III) phthalocyanine (Pc2 Lu) are described. Lowering of the melting point and viscosity of intrinsically solid Pc2 Lu compounds has been achieved through the attachment of flexible, bulky, and long branched-alkyl chains, that is, thio-2-octyldodecyl, to the periphery of the Pc2 Lu unit. The embedded Pc2 Lu unit maintains its inherent molecular functions, such as spin-active nature and electrochromic behavior in the liquid state. Comparison of the properties with a solid-like Pc2 Lu derivative, functionalized with shorter alkyl chains, that is, thio-2-ethylhexyl, underlines the importance of the hampering effect on the π-π interactions of neighboring Pc2 Lu molecules by bulkier and longer branched-alkyl chains. This study could possibly pave the way for novel multifunctional liquids whose spin-activities are associated with their rheological or optoelectronic properties.

High-pressure synthesis and crystal structure of the strontium tungstate Sr3W2O9.

The strontium tungstate compound Sr3W2O9 was prepared by a high-pressure synthesis technique. The crystal structure was determined by single-crystal X-ray diffraction and transmission electron microscopy. The structure was found to be a hettotype structure of the high-pressure phase of Ba3W2O9, which has corner-sharing octahedra with a trigonal symmetry. Sr3W2O9 has a monoclinic unit cell of C2/c symmetry. One characteristic of the structure is the breaking of the threefold rotation symmetry existing in the high-pressure phase of Ba3W2O9. The substitution of Sr at the Ba site results in a significant shortening of the interlayer distances of the [AO3] layers (A = Ba, Sr) and causes a distortion in the crystal structure. In Sr3W2O9, there is an off-centre displacement of W6+ ions in the WO6 octahedra. Such a displacement is also observed in the high-pressure phase of Ba3W2O9.

Discovery of the High-Pressure Phase of Ba3W2O9 and Determination of Its Crystal Structure.

A new polymorphism of Ba3W2O9 is discovered with the use of a high-pressure synthesis technique and its crystal structure is determined by single-crystal X-ray diffraction and transmission electron microscopy. The crystal structure was isostructural with that of Ba3Re2O9, having a hexagonal unit cell of R3̅m symmetry with a = 0.574060(10) nm and c = 2.08256(4) nm. The high-pressure (HP) phase is obtained from a transformation of an ambient-pressure (AP) phase of the compound, which has the Cs3Tl2Cl9-type structure. The most notable change in the transformation is the connection of WO6 octahedra. The HP phase has corner-sharing octahedra, which form a bilayer structure, while the AP phase has face-sharing octahedra of isolated [W2O9] dimers. This type of the structural phase transition is unreported although it is possibly that a sequence of high-pressure structural transformations occurs for similar chemical compositions. The HP phase has W ions in WO6 octahedra with an unusual off-center displacement; although the displacement is slightly relaxed compared with that of the AP phase. The off-center displacement suggests strong hybridization between the W 5d orbitals and O 2p orbitals.

Photochemistry and aggregation behavior of triethylene glycol (TEG) terminated stilbene dendrimers.

The photochemical properties of stilbene cored amphiphilic dendrimers (G0-G3) in THF and water were investigated. The solvation dynamics in water depended on the generation, while the behavior is almost the same in THF. Dendrimers G1 and G2 form molecular assemblies and undergo photodimerization reaction in addition to photoisomerization. G3 has enough TEG groups on the surface to cover the hydrophobic moiety within a single molecule. These dendrimers have free space around the core to undergo mutual isomerization even in water. This type of surface functional group is important for the dendritic effect in water.

Pressure-induced anomalous valence crossover in cubic YbCu5-based compounds.

A pressure-induced anomalous valence crossover without structural phase transition is observed in archetypal cubic YbCu5 based heavy Fermion systems. The Yb valence is found to decrease with increasing pressure, indicating a pressure-induced crossover from a localized 4f 13 state to the valence fluctuation regime, which is not expected for Yb systems with conventional c-f hybridization. This result further highlights the remarkable singularity of the valence behavior in compressed YbCu5-based compounds. The intermetallics Yb2Pd2Sn, which shows two quantum critical points (QCP) under pressure and has been proposed as a potential candidate for a reentrant Yb2+ state at high pressure, was also studied for comparison. In this compound, the Yb valence monotonically increases with pressure, disproving a scenario of a reentrant non-magnetic Yb2+ state at the second QCP.

Antiferromagnetic ordering in Sr2CrO4.

The magnetic ground state of Sr2CrO4 with a distorted honeycomb lattice was investigated by means of measurements of the magnetic susceptibility, high-field magnetization process, and electron spin resonance (ESR). Antiferromagnetic ordering was observed clearly below TN = 3.2 K, while the magnetic ground state had been thought to be a spin-singlet state. A two-sublattice model with biaxial anisotropy was applicable for the observed ESR modes. Plateau-like behavior and a sharp kink were detected in the magnetization curve.

Evaluation of scaffold materials for tooth tissue engineering.

Recently, the possibility of tooth tissue engineering has been reported. Although there are a number of available materials, information about scaffolds for tooth tissue engineering is still limited. To improve the manageability of tooth tissue engineering, the effect of scaffolds on in vivo tooth regeneration was evaluated. Collagen and fibrin were selected for this study based on the biocompatibility to dental papilla-derived cells and the results were compared with those of polyglycolic acid (PGA) fiber and beta-tricalcium phosphate (beta-TCP) porous block, which are commonly used for tooth, dentin and bone tissue engineering. Isolated porcine tooth germ-derived cells were seeded onto one of those scaffolds and transplanted to the back of nude mice. Tooth bud-like structures were observed more frequently in collagen and fibrin gels than on PGA or beta-TCP, while the amount of hard tissue formation was less. The results showed that collagen and fibrin gel support the initial regeneration process of tooth buds possibly due to their ability to support the growth of epithelial and mesenchymal cells. On the other hand, maturation of tooth buds was difficult in fibrin and collagen gels, which may require other factors.

Differential effect of scaffold shape on dentin regeneration.

The effect of scaffold shape on dentin regeneration is not well understood. In this study, porous hydroxyapatite/beta-tricalcium phosphate (HAp/beta-TCP), powdered HAp/beta-TCP, and polyglycolic acid (PGA) fiber mesh were used as scaffolds and transplanted with cultured porcine dental pulp-derived cells into the backs of nude mice. Samples were harvested after 6 weeks. Newly-formed hard tissue was observed in all transplants. When porous HAp/beta-TCP was used, dentin-like hard tissue was observed on the inner wall with minimum cell inclusions and odontoblast-like cells were aligned adjacent to the hard tissue. When HAp/beta-TCP powders or PGA were used, bone-like hard tissues showed cell inclusions and cell alignment was not observed. Hard tissue from the HAp/beta-TCP block group was positive for type I collagen, osteonectin, bone sialoprotein and dentin sialoprotein (DSP), which are markers for dentin. This result was confirmed by in situ hybridization with a dsp probe. Only the aligned cells were positive with an antisense probe. On the other hand, hard tissue from other scaffolds showed incomplete expression of both bone and dentin markers and they were negative for osteonectin and DSP. These results suggest that scaffold shape affects the type of tissue regenerated by dental pulp-derived cells.

Superconductivity in two-dimensional CoO2 layers.

Since the discovery of high-transition-temperature (high-T(c)) superconductivity in layered copper oxides, many researchers have searched for similar behaviour in other layered metal oxides involving 3d-transition metals, such as cobalt and nickel. Such attempts have so far failed, with the result that the copper oxide layer is thought to be essential for superconductivity. Here we report that Na(x)CoO2*yH2O (x approximately 0.35, y approximately 1.3) is a superconductor with a T(c) of about 5 K. This compound consists of two-dimensional CoO2 layers separated by a thick insulating layer of Na+ ions and H2O molecules. There is a marked resemblance in superconducting properties between the present material and high-T(c) copper oxides, suggesting that the two systems have similar underlying physics.