Regulation of toxin and virulence gene transcription in Bacillus thuringiensis.

Bacillus thuringiensis is a spore-forming bacterium well known for its insecticidal properties and its ability to produce a crystal inclusion during sporulation. The specific activity of B. thuringiensis against insect larvae is due to the crystal proteins (Cry proteins). Two different transcriptional mechanisms (dependent and independent of sporulation) are responsible for cry gene transcription during the stationary phase. In addition to these specific insecticidal toxins, B. thuringiensis produces potential virulence factors including haemolysins, degradative enzymes and enterotoxins. A pleiotropic regulator (PlcR) that activates the transcription of various genes encoding such extracellular proteins has been identified. Its expression at the onset of the stationary phase is dependent on the growth medium and is controlled by the transition state regulator, SpoOA.

Functions of S-layers.

Although S-layers are being increasingly identified on Bacteria and Archaea, it is enigmatic that in most cases S-layer function continues to elude us. In a few instances, S-layers have been shown to be virulence factors on pathogens (e.g. Campylobacter fetus ssp. fetus and Aeromonas salmonicida), protective against Bdellovibrio, a depository for surface-exposed enzymes (e.g. Bacillus stearothermophilus), shape-determining agents (e.g. Thermoproteus tenax) and nucleation factors for fine-grain mineral development (e.g. Synechococcus GL 24). Yet, for the vast majority of S-layered bacteria, the natural function of these crystalline arrays continues to be evasive. The following review up-dates the functional basis of S-layers and describes such diverse topics as the effect of S-layers on the Gram stain, bacteriophage adsorption in lactobacilli, phagocytosis by human polymorphonuclear leukocytes, the adhesion of a high-molecular-mass amylase, outer membrane porosity, and the secretion of extracellular enzymes of Thermoanaerobacterium. In addition, the functional aspect of calcium on the Caulobacter S-layer is explained.

A genetic system that reports transient activation of genes in Bacillus.

Site-specific recombination is a powerful tool for precise excision of DNA fragments. We used this characteristic to construct a genetic system to report the transient activation of a promoter by promoting the stable acquisition of an antibiotic resistance marker by the bacterium. The system is composed of two compatible plasmid derivatives from Gram-positive bacteria. One of the plasmids allows the insertion of promoters upstream from tnpI, which encodes the site-specific recombinase of Tn4430. The second plasmid carries two selectable resistance genes: one is flanked by two site-specific recombination sequences and is lost following recombination; in contrast, the other resistance gene becomes functional after the site-specific recombination event. By inserting conditionally controlled promoters (the xylose-inducible xylA promoter or the plcA promoter whose expression is dependent on the growth medium) upstream of tnpI, we demonstrated that our genetic system responds to signals inducing transcription by conferring a new resistance phenotype to the host bacteria. Thus, this system can be used to identify genes which are transiently or conditionally expressed.

Genetic analysis of cryIIIA gene expression in Bacillus thuringiensis.

The Bacillus thuringiensis (Bt) cryIIIA gene is regulated by a different mechanism from that of most of the other cry genes. Its expression begins during late-exponential growth and not during sporulation as for the other classes of cry genes. Moreover, in Bacillus subtilis, cryIIIA expression is independent of the major sporulation-specific sigma factors and is increased in a spoOA genetic background. We used lacZ fusions and primer-extension analysis to follow the time-course of cryIIIA transcription in Bt wild-type and in various Spo- genetic backgrounds (spoOA, sigE and sigK). cryIIIA was activated from the end of vegetative growth to stage II of sporulation (t3) in the wild-type strain. Thereafter, transcription from the same promoter continued, at a decreasing rate, until the end of stage III. In the spoOA mutant strain, the same promoter was activated for at least 15 h during the stationary phase. cryIIIA activation in the sigK genetic background was similar to that in the wild-type but was extended in a sigma E mutant strain. Thus cryIIIA expression in Bt is not directly dependent on the major sporulation-specific sigma factors. Furthermore, an event linked with the thE-dependent period of sporulation ends cryIIIA activation, although transcription of this gene does not switch off before the end of stage III.

Identification of a Bacillus thuringiensis gene that positively regulates transcription of the phosphatidylinositol-specific phospholipase C gene at the onset of the stationary phase.

A transcriptional analysis of the phosphatidylinositol-specific phospholipase C (plcA) gene of Bacillus thuringiensis indicated that its transcription was activated at the onset of the stationary phase in B. thuringiensis but was not activated in B. subtilis. The B. thuringiensis gene encoding a transcriptional activator required for plcA expression was cloned by using a B. subtilis strain carrying a chromosomal plcA'-'lacZ fusion as a heterologous host for selection. This trans activator (designated PlcR) is a protein of a calculated molecular weight of 33,762 which appears to be distantly related to PreL and NprA, regulator proteins enhancing transcription of neutral protease genes during the stationary phase of a Lactobacillus sp. and B. stearothermophilus, respectively. plcR gene transcription was analyzed in B. thuringiensis and in B. subtilis. PlcR positively regulated its own transcription at the onset of the stationary phase. There is a highly conserved DNA sequence (17 bp) 34 nucleotides upstream from the plcR transcriptional start site and 49 nucleotides upstream from the plcA transcriptional start site. As PlcR positively regulates its own transcription and plcA transcription, this conserved DNA sequence may be the specific recognition target for PlcR activation.

Analysis of cryIAa expression in sigE and sigK mutants of Bacillus thuringiensis.

The sigE and sigK genes, encoding the sporulation-specific sigma factors sigma 35 and sigma 28 of Bacillus thuringiensis, were each disrupted by inserting a gene conferring resistance to kanamycin into their coding sequences. The B. thuringiensis SigE- and sigK- mutant strains were blocked at different sporulation stages and were unable to sporulate. The SigE-strain was blocked at stage II of sporulation, whereas the SigK- strain was blocked at stage IV. The expression of a cryIAa'-'lacZ transcriptional fusion was analysed in these genetic backgrounds and it was found that both sigma factors are involved in the in vivo transcription of this gene. However, the SigK- strain harbouring the cryIAa gene produced amounts of toxin similar to those produced by the B. thuringiensis Spo+ strain. The toxins accumulated in the mother cell compartment to form a crystal inclusion which remained encapsulated within the cell wall. Thus, transcription from the sigma E-dependent promoter alone (Bt I promoter) is sufficient to support high levels of toxin production in B. thuringiensis.

Recognition specificity of the duplicated segments present in Clostridium thermocellum endoglucanase CelD and in the cellulosome-integrating protein CipA.

The binding specificity of the duplicated segments borne by Clostridium thermocellum endoglucanase CelD and by the cellulosome-integrating protein CipA was investigated. The fusion protein CelC-DSCelD, in which the duplicated segment of CelD was fused to the COOH terminus of endoglucanase CelC, bound with an affinity of 4.7 x 10(7) M-1 to the fusion protein MalE-RDCipA, in which the seventh receptor domain of CipA was grafted onto the COOH terminus of the Escherichia coli maltose-binding protein MalE. The affinity of CelC-DSCelD for the homologous chimeric protein MalE-RDORF3p, carrying the receptor of the surface protein ORF3p, was 6.9 x 10(6) M-1. The fusion protein CelC-DSCipA, in which the duplicated segment of CipA was grafted onto the COOH terminus of CelC, did not bind detectably to MalE-RDCipA or MalE-RDORF3p. However, Western blotting (immunoblotting) experiments indicated that the duplicated segment of CipA was able to bind to a set of C. thermocellum proteins which are different from those recognized by the duplicated segment of CelD. These results argue against the hypothesis that ORF3p interacts with the duplicated segment of CipA. More probably, ORF3p binds to individual cellulases and hemicellulases harboring duplicated segments.

Subcellular localization of Clostridium thermocellum ORF3p, a protein carrying a receptor for the docking sequence borne by the catalytic components of the cellulosome.

The ORF3 gene of Clostridium thermocellum encodes a polypeptide (ORF3p) which contains a receptor domain for the docking sequence borne by the catalytic subunits of the cellulosome and a triplicated domain related to some bacterial cell surface proteins. It was thus surmised that ORF3p is a surface protein. In this study, this hypothesis was confirmed. Subcellular fractionation, Western blotting (immunoblotting), and electron microscopy of immunocytochemically labeled cells indicated that ORF3p produced by C. thermocellum was located in the outer surface layer of the bacterium. This layer appeared to consist of a soft matrix shedding off particulate fragments. Nonsedimenting ORF3p derived from sonicated cells was associated with high-molecular-mass fractions (> 20 MDa), probably corresponding to fragments of the outer cell layer. The same high-molecular-mass fractions also contained the cellulosomal marker CipA. Contrary to CipA, however, ORF3p was not associated with 2- to 4-MDa fractions corresponding to individual cellulosomes, and a significant fraction of ORF3p failed to bind to cellulose. It is proposed that ORF3 and ORF3p be renamed olpA and OlpA, respectively (for outer layer protein).

Involvement of separate domains of the cellulosomal protein S1 of Clostridium thermocellum in binding to cellulose and in anchoring of catalytic subunits to the cellulosome.

Fragments of the 250 kDa S1 subunit of the Clostridium thermocellum cellulosome were obtained by protease-induced or spontaneous degradation. All detectable fragments, down to a mass of about 30 kDa, retained the ability to bind to 125I-labelled endoglucanase CelD, one of the catalytic subunits of the cellulosome. Several fragments were able to bind both to cellulose and to CelD. However, some fragments that could still bind to CelD did not have the ability to bind to cellulose. Therefore, S1, a putative scaffolding protein of the cellulosome, is likely to carry two separate types of domains, one of which binds to cellulose, while the other type binds to the various catalytic subunits of the complex.

Interaction of the duplicated segment carried by Clostridium thermocellum cellulases with cellulosome components.

The function of the non-catalytic, duplicated segment found in C. thermocellum cellulases was investigated. Rabbit antibodies reacting with the duplicated segment of endoglucanase CelD cross-reacted with a variety of cellulosome components ranging between 50 and 100 kDa. 125I-labeled forms of CelD and of xylanase XynZ carrying the duplicated segment bound to a set of cellulosome proteins ranging between 66 and 250 kDa, particularly to the 250 kDa SL (or S1) subunit. 125I-labeled forms of CelD and XynZ devoid of the duplicated segment failed to bind to any cellulosome protein. The duplicated segment appears thus to serve to anchor the various cellulosome subunits to the complex by binding to SL, which may be a scaffolding element of the cellulosome.