The incidence of breast cancer in Egyptian females in correlation to different mammographic ACR densities.

INTRODUCTION: The density of breast tissue, radiologically referred to as fibroglandular mammary tissue, was found to be a predisposing factor for breast cancer (BC). However, the stated degree of elevated BC risk varies widely in the literature.

Optimizing Transport Carrier Free All-Polymer Solar Cells for Indoor Applications: TCAD Simulation under White LED Illumination.

This work inspects the utilization of all-polymer solar cells (APSCs) in indoor applications under LED illumination, with a focus on boosting efficiency through simulation-based design. The study employs a SCAPS TCAD device simulator to investigate the performance of APSCs under white LED illumination at 1000 lux, with a power density of 0.305 mW/cm2. Initially, the simulator is validated against experimental results obtained from a fabricated cell utilizing CD1:PBN-21 as an absorber blend and PEDOT:PSS as a hole transportation layer (HTL), where the initial measured efficiency is 16.75%. The simulation study includes an examination of both inverted and conventional cell structures. In the conventional structure, where no electron transportation layer (ETL) is present, various materials are evaluated for their suitability as the HTL. NiO emerges as the most promising HTL material, demonstrating the potential to achieve an efficiency exceeding 27%. Conversely, in the inverted configuration without an HTL, the study explores different ETL materials to engineer the band alignment at the interface. Among the materials investigated, ZnS emerges as the optimal choice, recording an efficiency of approximately 33%. In order to reveal the efficiency limitations of these devices, the interface and bulk defects are concurrently investigated. The findings of this study underscore the significance of careful material selection and structural design in optimizing the performance of APSCs for indoor applications.

π-π Stacking at the Perovskite/C60 Interface Enables High-Efficiency Wide-Bandgap Perovskite Solar Cells.

Interface passivation is a key method for improving the efficiency of perovskite solar cells, and 2D/3D perovskite heterojunction is the mainstream passivation strategy. However, the passivation layer also produces a new interface between 2D perovskite and fullerene (C60), and the properties of this interface have received little attention before. Here, the underlying properties of the 2D perovskite/C60 interface by taking the 2D TEA2PbX4 (TEA = C6H10NS; X = I, Br, Cl) passivator as an example are systematically expounded. It is found that the 2D perovskite preferentially exhibits (002) orientation with the outermost surface featuring an oriented arrangement of TEACl, where the thiophene groups face outward. The outward thiophene groups further form a strong π-π stacking system with C60 molecule, strengthening the interaction force with C60 and facilitating the creation of a superior interface. Based on the vacuum-assisted blade coating, wide-bandgap (WBG, 1.77 eV) perovskite solar cells achieved impressive records of 19.28% (0.09 cm2) and 18.08% (1.0 cm2) inefficiency, respectively. This research not only provides a new understanding of interface processing for future perovskite solar cells but also lays a solid foundation for realizing efficient large-area devices.

COVID-19 prevention and rehabilitation related knowledge and practices among Egyptian post-COVID-19 patients.

BACKGROUND: Even with the mild form of COVID-19, people need to practice the proper preventive measures to achieve health, safety and control spread of infection. Few studies assessed sound disinfection and rehabilitative knowledge. This study aims to assess the self-reported, knowledge of specific disinfection measures among post-recovery COVID-19 patients and identifying the most requested knowledge items regarding the prevention and post COVID rehabilitation measures. METHODS: This is an exploratory cross-sectional study using an electronically open survey. A pre-tested e-questionnaire was employed for data assembling. The sample size was calculated and a total of 417 people completed the questionnaire. Knowledge score was calculated for preventive and disinfection measures during and after COVID 19 infection. It comprised three sections: socio-demographics, study participants' knowledge regarding precautions, disinfection, and rehabilitation measures, as well as sources of knowledge about COVID-19. RESULTS: All participants infected with COVID-19 (82%) reported self-isolation for ten days after confirming the infection, with only 18% required hospitalization. Regarding the information needed by the participants, the highest requests were for the rehabilitation information after COVID-19 and preventive measures. Females under 30 years old and those with a college education or higher were significantly more likely to request rehabilitation information after COVID-19 (P-value 0.05). Nevertheless, males were significantly more interested in information regarding preventive measures; They were over 30 years old and had education below university (P-value 0.05). Participants (above 30 years old) had significantly higher knowledge of preventive and disinfection measures during and after COVID-19 infection (P = 0.030). CONCLUSION: After the COVID-19 experience, most participants demonstrated a great desire for rehabilitation information and proper preventive measures. This paves the way for delivering self-management and rehabilitation knowledge and emphasizing the significance of various prevention modalities.

Plastic use for food and drinks and related knowledge, attitudes, and practices among a sample of Egyptians.

Introduction: Plastic is extensively used in everyday life, particularly for food and beverage containers. The inappropriate use of these containers may lead to the leaching of various chemicals from plastic, such as bisphenol A, phthalate, and styrene, which cause numerous adverse health effects. This study aimed to assess the knowledge, attitudes, and practices toward using plastic for food and drinks among a sample of the Egyptian population. Materials and methods: A questionnaire was designed based on scientific literature to assess sociodemographic data, knowledge, attitudes, and practices toward the use of plastic for food and drinks. A total of 639 participants were recruited by employing the convenience sampling technique. Results: More than half of the participants (347, 54%) had poor knowledge scores. Personal experiences, social media, and web pages represented the most common knowledge sources. A comparison between plastic-related knowledge scores and the studied sociodemographic characteristics revealed statistically significant differences in age, gender, education, marital status, residence, working, and socioeconomic standard. A good attitude was reported by the majority (515, 80.6%) of participants. The majority (493, 77.2%) were occasional and frequent plastic users and the practice scores were significantly associated with age, education, residence, and socioeconomic standard. Higher educational level, gender (women), and rural residence were predictors of good participants knowledge, while lower socioeconomic status and urban residence were predictors of bad participants practice in a multivariate logistic regression analysis. Conclusion: The observed unsatisfactory knowledge and practice scores vs. the high attitude indicates a knowledge gap that can help direct future improvements. We call for public awareness programs about safe plastic use and the related health hazards of plastic chemicals. We also stress upon the urgent need for a collaboration between health authorities and the plastic and food industry to guarantee that information about proper plastic use is conveyed to consumers.

The impact of systemic methotrexate and surgical management on fertility preservation in tubal ectopic pregnancy among Saudi women.

BACKGROUND: The impact of various management plans on subsequent fertility after tubal ectopic pregnancy (EP) is not well known. The objective of the present study was an evaluation of the subsequent fertility outcome among women with EP managed either surgical or medical with systemic methotrexate or medical management followed by surgical one. PATIENTS AND METHODS: A retrospective cohort study was done by reviewing of medical records of all women diagnosed with EP at King Faisal Military Hospital, Southern Region, Saudi Arabia throughout the period from January 2015 to December 2016 provided that they were hemodynamic stable, with starting ßhCG level less than 10000 IU/L, and adnexal mass less than 5 cm. These cases were followed for four years from January 2017 to December 2020. RESULTS: The study included 85 women with EP. Their mean age was 31.3 ± 6.7 years. Medical management (systemic Methotrexate) was followed in 48.2% of cases whereas surgical management was applied for 43.5% of them while medical management followed by surgical one was seen in 8.2% of cases. Complete follow-up throughout 2017-2020 was available for 52 women. A history of recurrent EP was observed among 3 women (5.8%). Most of them (75%) had a viable pregnancy. There was no statistically significant association between the method of management of EP and subsequent fertility, although the rate of normal pregnancy (intrauterine viable pregnancy ≥ 24 weeks which is the age of viability at our hospital) was higher among those managed surgically or by medical followed by surgical management than those managed medical only (84.6% and 100% vs. 62.5%). CONCLUSION: Although the normal pregnancy rate was higher among those managed surgically or by medical followed by surgical management than those managed medically only, this was not statistically significant.

Exploration of the nutrition knowledge among general population: multi-national study in Arab countries.

BACKGROUND: Knowing what to eat and realizing the significance of healthful eating habits are among the important steps to promoting eating behavior. The current study aims to assess the nutrition knowledge (NK) among a convenient sample in four different countries, determine the association between different demographic factors and NK, and investigate the need for future interventions on nutrition in the four selected countries. METHODS: A cross-sectional multi-national survey study among a convenient sample of 8,191 subjects from Egypt, Syria, Saudi Arabia, and Jordan who undertook surveys between January 2019 and January 2020. A pre-tested interview questionnaire was utilized for data collection from study participants. It included three sections: i) Sociodemographic characteristics:. ii). Section two included twenty-one questions related to NK.. iii). Section three included one question about NK sources. RESULTS: About three-quarters showed inadequate nutrition knowledge (73.1%). Youth (15-24 yrs.) were more dependent on social media, with 87% using it as a primary source of NK, while adults (≥ 25 yrs.) demonstrated that 43% of them used social media. In contrast, TV was more prominent among them, with participants' characteristics such as living with parents, body mass index, and country of residence showing no association with NK. However, female sex, education, and reading nutrition articles are significantly correlated with adequate knowledge (p < 0.001). Significant predictors of satisfactory knowledge were age, sex, education, living with parents, and reading nutrition articles. CONCLUSION: The study revealed low levels of NK indicating an urgent need to implement educational programs to promote nutrition knowledge. As NK is a modifiable determinant of diet intake and can positively impact the need for developing strategies in counselling and raising awareness among the general population to improve their health status.

Protective role of iron oxide nanocomposites on disease index, and biochemical resistance indicators against Fusarium oxysporum induced-cucumber wilt disease: In vitro, and in vivo studies.

Recently nanocomposites have become a super-growth inducers as well as vital antifungal agents, which enhance plant growth and suppress plant diseases. A new strategy regarding the fabrication of humic acid (H) and boron (B) conjugated Fe2O3 nanocomposites was performed. Fe2O3 NP-B and Fe2O3 NP-H were synthesized in the presence of gamma-rays (as a direct reducing agent). Gamma-rays provoked reduction of metal ions due to the liberated reducing electrons, (e-aq), in aqueous solutions which can be considered as a direct reduction. Antifungal potential against Fusarium oxysporum, the causative agent of wilt disease in cucumber was determined. Disease index percent, metabolic resistance indicators in cucumber plant as response to promotion of systemic resistance (SR) were recorded. Results illustrated that both Fe2O3 NPs-B and Fe2O3 NPs-H nanocomposites had antifungal activity against F. oxysporumin vitro as well as in vivo. Results revealed that minimum inhibitory concentrations of Fe2O3 NPs-B and Fe2O3 NPs-H nanocomposites were 0.25 and 0.125 mM, respectively. Application of Fe2O3 NPs-B (0.25 mM) and Fe2O3 NPs-H (0.125 mM) appeared highly reduced the cucumber wilt disease symptoms incidence caused by F. oxysporum, and recorded disease severity by 83.33%. Fe2O3 NPs-B was the best treatment reducing disease indexes by 20.83% and gave highly protection against wilt disease by 75.0% and came next Fe2O3 NPs-H which reduced disease indexes by 25% and gave 69.99% protection against disease. Fe2O3 NPs-B and Fe2O3 NPs-H treatments improved morphological traits, photosynthetic pigments, osmolytes, total phenol and antioxidant enzymes activities in both infected and non-infected plants. The beneficial effects of the synthesized Fe2O3 NPs-B and Fe2O3 NPs-H nanocomposites were extended to increase not only the total phenol, and total soluble protein contents but also the activities of peroxidase (POD), and polyphenol oxidase (PPO) enzymes of the healthy and infected cucumber plants in comparison with control.

Social and self-stigma during COVID-19 pandemic: Egyptians' perspectives.

BACKGROUND: Social stigma associated with infectious diseases existed throughout the history of pandemics due to fears of contagion and death. This study aims to assess social and self-stigma resulting from COVID-19 infection and other associated factors in Egypt during the pandemic. METHODS: A cross-sectional study was conducted on 533 adult Egyptians via an online questionnaire. The questionnaire included social stigma toward current and recovered COVID-19 patients and the negative self-image of being a COVID-19 patient. RESULTS: The mean calculated overall COVID-19-related stigma score for the studied sample was 4.7±3.1. The highest reported stigma category was mild stigma: Social stigma towards current COVID-19 patients (88.2%), Social stigma toward recovered COVID-19 patients (64.2%), Negative self-image for being a COVID-19 patient; perceived self-stigma (71.6%) and total stigma score (88.2%) respectively. The overall stigma score was negatively associated with a higher level of education and getting information from healthcare workers and positively associated with getting information from social networks. CONCLUSION: Social and self-stigma related to COVID-19 infection was mild from the Egyptian perspective but found in a large proportion of the population and mainly affected by getting information from healthcare workers or through social media and being more among those with lower education levels. The study recommends more legislative control on social media for disseminating health-related information and conducting awareness campaigns to counteract these adverse effects.

Barriers to adequate nutrition care for child malnutrition in a low-resource setting: Perspectives of health care providers.

Introduction: Several studies in developing countries found that more need-based training is required for health care providers (HCPs) in child malnutrition management. Methods: An exploratory cross-sectional study was conducted to explore barriers to providing adequate nutrition care as perceived by the healthcare providers (HCPs) in the child malnutrition clinic at a Children's University Hospital in Egypt. Participants were selected using the purposive sampling technique. Five out of seven HCPs in the clinic were included (two male physicians, one female physician, and two female nurses). Qualitative data were collected through in-depth interviews. The interview guide consisted of semi-structured open-ended questions. Quantitative data were the resulting scores from the scoring system used to assess the understandability and actionability of the patient education materials (PEMs) that are available in the clinic. The Patient Education Materials Assessment Tool for Printable Materials (PEMAT-P) for the scoring. Statistical analysis: The thematic content analysis technique was employed for qualitative data. The percent score was generated for the PEM actionability and understandability for quantitative data. Results: Most common child malnutrition conditions encountered by HCPs were nutritional deficiencies. Barriers to the delivery of adequate nutrition care to children were physician-centered: limited nutrition education in the medical school, health system-centered: an insufficient number of HCPs, lack of nutritional supplements, lack of patient education materials (PEMs) that suit the characteristics of the served community, lack of updated standard of practice (SOP) and guidelines, inadequate nutrition training of HCPs, and insufficient time for each patient, and caregivers-centered: the low socioeconomic status and false cultural, nutritional beliefs. Conclusion: There are different barriers to adequate nutrition care for child malnutrition in low-resource healthcare settings. Mainly nutritional deficiencies. Most of the barriers were health system-related in the form of insufficient resources (shortage of workforce; concerning the high caseload, nutritional supplements, and PEMs) and inadequate management of resources (lack of skill-based training, lack of updated SOP and guidelines, and lack of properly designed PEMs that facilitate communication with the target caregivers).

Perspectives on Antibiotic Stewardship Programs among Health Care Providers at Two University Hospitals in Egypt.

The perspectives of healthcare professionals on antibiotic stewardship programs (ASPs) should be explored. Any antibiotic stewardship strategy must be individualized based on patient needs, prescription habits, and local resources. The current study aimed to explore the perspectives of healthcare providers on antibiotics stewardship and their awareness of these perspectives. Furthermore, potential barriers to the application of ASPs should be identified and addressed. This exploratory cross-sectional study utilized a qualitative method to evaluate critical care physicians, pediatricians, and clinical pharmacists (n = 43). The mean age of the physicians was 32 ± 1.5 years. Among them, approximately two-thirds (66%) were women. A thematic content analysis was performed to examine the responses of the participants and to prioritize the recommendations for and barriers to the implementation of ASPs from the perspective of healthcare providers. According to the interviewees, the primary obstacles include lack of time in implementation and monitoring and lack of awareness of the need for ASPs. All respondents recommended the implementation of supervised and continuous trainings. In conclusion, the abovementioned barriers must be adequately addressed to facilitate the implementation of ASPs.

Prevalence, characteristics, and factors associated with caffeine-withdrawal headache during the first day of Ramadan.

BACKGROUND: Data regarding prevalence, characteristics, and factors associated with caffeine-withdrawal headache are lacking. This work aimed to study the prevalence of caffeine-withdrawal headache among caffeine consumers during Ramadan's first day and describe its characteristics and associated factors. METHODS: This analytical cross-sectional study targeted 755 caffeine consumers eligible to fast on the first day of Ramadan. Two methodological approaches were followed: an online open survey and a face-to-face interview. Using an adjusted form of food frequency questionnaire, eligible participants were requested to report their intake of caffeine-containing products during the last week of Shaaban month, the month preceding Ramadan. RESULTS: The prevalence of caffeine-withdrawal headache on the first day of Ramadan was 419 (55.5%), with 95% confidence interval (CI; 51.9-59.0%). The headache in the majority of the participants was throbbing in character (249/419, 59.4%), diffuse (146/419, 34.8%), and moderate in intensity (227/419, 54.2%). Participants who developed caffeine-withdrawal headache had significantly higher body mass index (27.2 ± 5.1 vs. 26.3 ± 5 [mean ± standard deviation], p-value = 0.012), daily caffeine intake, mg (316 [185.2-537.8] vs. 144.4 [60.0-312.4] [median interquartile range (IQR)], p-value < 0.001), and caffeine intake mg/kg body weight (4.7 [2.6-7.2] vs. 1.9 [0.8-4.4] [median (IQR)], p-value < 0.001) than participants who did not develop it. Mild, moderate, and severe caffeine use disorder were found to have adjusted associations with developing caffeine-withdrawal headache. They increased the odds of headache by 5.3 (95% CI = 3.40-8.3), 10.2 (95% CI = 5.9-17.5), and 15.5 (95% CI = 9.0-26.8) times, respectively. The optimal cut-off value of daily caffeine intake/Kg body weight was determined at 1.97 mg/kg with an area under the curve of 0.722 and sensitivity and specificity of 85.1% and 50.2%, respectively. CONCLUSION: Daily caffeine intake/kg body weight and caffeine use disorder are significantly associated with a caffeine-withdrawal headache.

Boosting the Electrostatic MEMS Converter Output Power by Applying Three Effective Performance-Enhancing Techniques.

This current study aims to enhance the electrostatic MEMS converter performance mainly by boosting its output power. Three different techniques are applied to accomplish such performance enhancement. Firstly, the power is boosted by scaling up the technology of the converter CMOS accompanied circuit, the power conditioning, and power controlling circuits, from 0.35 µm to 0.6 µm CMOS technology. As the converter area is in the range of mm2, there are no restrictions concerning the scaling up of the accompanied converter CMOS circuits. As a result, the maximum voltage of the system for harvesting energy, Vmax, which is the most effective system constraint that greatly affects the converter's output power, increases from 8 V to 30 V. The output power of the designed and simulated converter based on the 0.6 µm technology increases from 2.1 mW to 4.5 mW. Secondly, the converter power increases by optimizing its technological parameters, the converter thickness and the converter finger width and length. Such optimization causes the converter output power to increase from 4.5 mW to 11.2 mW. Finally, the converter structure is optimized to maximize its finger length by using its wasted shuttle mass area which does not contribute to its capacitances and output power. The proposed structure increases the converter output power from 11.2 mW to 14.29 mW. Thus, the three applied performance enhancement techniques boosted the converter output power by 12.19 mW, which is a considerable enhancement in the converter performance. All simulations are carried out using COMSOL Multiphysics 5.4.

Device Modeling of Efficient PBDB-T:PZT-Based All-Polymer Solar Cell: Role of Band Alignment.

In this study, we present some design suggestions for all-polymer solar cells by utilizing device simulation. The polymer solar cell under investigation is formed by a photoactive film of a blend comprising PBDB-T as a polymer donor and PZT as a polymerized small molecule acceptor. The initial cell is based on a fabricated cell whose structure is ITO/PEDOT:PSS/PBDB-T:PZT/PFN-Br/Ag, which has a power conversion efficiency (PCE) of about 14.9%. A calibration procedure is then performed by comparing the simulation results with experimental data to confirm the simulation models, and the material parameters, implemented in the SCAPS (Solar Cell Capacitance Simulator) simulator. To boost the open circuit voltage, we investigate a group of hole transport layer (HTL) materials. An HTL of CuI or P3HT, that may replace the PEDOT:PSS, results in a PCE of higher than 20%. However, this enhanced efficiency results in a minor S-shape curve in the current density-voltage (J-V) characteristic. So, to suppress the possibility of the appearance of an S-curve, we propose a double HTL structure, for which the simulation shows a higher PCE with a suppressed kink phenomenon due to the proper band alignment. Moreover, the designed cell is investigated when subjected to a low light intensity, and the cell shows a good performance, signifying the cell's suitability for indoor applications. The results of this simulation study can add to the potential development of highly efficient all-polymer solar cells.

Full Optoelectronic Simulation of Lead-Free Perovskite/Organic Tandem Solar Cells.

Organic and perovskite semiconductor materials are considered an interesting combination thanks to their similar processing technologies and band gap tunability. Here, we present the design and analysis of perovskite/organic tandem solar cells (TSCs) by using a full optoelectronic simulator (SETFOS). A wide band gap lead-free ASnI2Br perovskite top subcell is utilized in conjunction with a narrow band gap DPPEZnP-TBO:PC61BM heterojunction organic bottom subcell to form the tandem configuration. The top and bottom cells were designed according to previous experimental work keeping the same materials and physical parameters. The calibration of the two cells regarding simulation and experimental data shows very good agreement, implying the validation of the simulation process. Accordingly, the two cells are combined to develop a 2T tandem cell. Further, upon optimizing the thickness of the front and rear subcells, a current matching condition is satisfied for which the proposed perovskite/organic TSC achieves an efficiency of 13.32%, Jsc of 13.74 mA/cm2, and Voc of 1.486 V. On the other hand, when optimizing the tandem by utilizing full optoelectronic simulation, the tandem shows a higher efficiency of about 14%, although it achieves a decreased Jsc of 12.27 mA/cm2. The study shows that the efficiency can be further improved when concurrently optimizing the various tandem layers by global optimization routines. Furthermore, the impact of defects is demonstrated to highlight other possible routes to improve efficiency. The current simulation study can provide a physical understanding and potential directions for further efficiency improvement for lead-free perovskite/organic TSC.

Impact of nutrition counseling on anthropometry and dietary intake of multiple sclerosis patients at Kasr Alainy Multiple Sclerosis Unit, Cairo, Egypt 2019-2020: randomized controlled clinical trial.

BACKGROUND: Faulty dietary habits and overnutrition are prevalent among Egyptian patients with multiple sclerosis (MS) who do not receive nutrition care as part of treatment. Thus, this study was conducted to identify the effect of nutrition counseling on the nutritional status of patients with MS. This endeavor might provide evidence for the value of counseling in such a setting and advance the integration of nutrition counseling into the routine management of patients with MS. METHODS: A single-blinded, parallel-randomized controlled clinical trial was conducted at Kasr Alainy MS Unit on 120 eligible patients with MS from September 2019 to February 2020. Patients were randomly allocated to either the nutrition counseling intervention group (IG) or the control group (CG). Allocation concealment was performed by using sequentially numbered opaque sealed envelopes. All patients were assessed initially and complied with the Kasr Alainy MS Unit standard management protocol for the study period. Only patients in the IG underwent initial nutrition counseling sessions followed by a monthly evaluation. All patients were assessed at the end of the 3-month follow-up period. Sociodemographic data were gathered through a structured interview. Nutritional status was assessed anthropometrically and via 24-h recall. The 2 groups were compared initially and at the end of the follow-up. Both intention-to-treat and per-protocol analyses were conducted. RESULTS: At baseline assessment, the prevalence of overweight and obesity was 31.7% and 32.5%, respectively, and the mean body mass index was 27.7 ± 5.7 kg/m2. Mean waist circumference was 93.5 ± 11.9 and 99.2 ± 13.1 cm for males and females, respectively. Approximately 27.3% of males and 83.9% of females showed abdominal obesity. After 3 months of counseling, weight, body mass index, waist circumference, nutrient intake and adequacy significantly improved in the IG (p < 0.05). CONCLUSION: Nutrition counseling significantly improved anthropometric measurements, dietary habits, nutrient intake and adequacy. TRIAL REGISTRATION: The study was registered on ClinicalTrial.gov and was given a code (NCT04217564).

Climate change-related knowledge and attitudes among a sample of the general population in Egypt.

Introduction: Identifying the public awareness and risk perception regarding climate change, are fundamental preliminary steps in determining gaps and paving the way for awareness campaigns that address climate change causes and counteraction mitigation measures. However, few studies were conducted in Egypt; thus, the researchers conducted the current cross-sectional study among a sample of the Egyptian population to identify general knowledge and perception about climate change and its effects, as well as attitudes toward mitigation measures. Methods: An exploratory population-based electronic-open survey, was conducted among 527 members of the general population between January and April 2022, using a convenience sampling technique. A pre-tested 2-page (screen) electronic included three sections: sociodemographic characteristics, global warming/climate change-related knowledge, and attitude toward climate change mitigation. Results: The average global warming knowledge score was 12 ± 3. More than 70% (71.1%) of the participants were knowledgeable (percentage score >70%). Approximately half of the enrolled participants (48.2%) agreed that everyone is vulnerable to the effects of global warming/climate change. More than three-quarters (78.3%) of the participants agreed that carbon emissions from vehicles and industrial methane emissions were the first factors that contributed to climate change, followed by the ozone holes (731%). Global warming/climate change-related knowledge was statistically higher in participants aged of >30 years, married participants, urban residents, highly educated individuals, and employed individuals (p-value ≤ 0.05). Approximately 80% of the participants agreed that responding to the questionnaire drew their attention to the topic of climate change and its effects. More than two-thirds of those polled agreed that increasing public transportation use could help mitigate the effects of climate change/global warming, followed by the materials used and the direction of construction. Conclusion: More than two-thirds of the participants were knowledgeable regarding climate change. Social media and the internet were the main sources of information. However, participants need to get the information in a different way that could help in changing their attitude positively toward the issue of climate change mitigation. The current study recommends the need for various initiatives that work should be launched.

Enhancement of Cerium Sorption onto Urea-Functionalized Magnetite Chitosan Microparticles by Sorbent Sulfonation-Application to Ore Leachate.

The recovery of strategic metals such as rare earth elements (REEs) requires the development of new sorbents with high sorption capacities and selectivity. The bi-functionality of sorbents showed a remarkable capacity for the enhancement of binding properties. This work compares the sorption properties of magnetic chitosan (MC, prepared by dispersion of hydrothermally precipitated magnetite microparticles (synthesized through Fe(II)/Fe(III) precursors) into chitosan solution and crosslinking with glutaraldehyde) with those of the urea derivative (MC-UR) and its sulfonated derivative (MC-UR/S) for cerium (as an example of REEs). The sorbents were characterized by FTIR, TGA, elemental analysis, SEM-EDX, TEM, VSM, and titration. In a second step, the effect of pH (optimum at pH 5), the uptake kinetics (fitted by the pseudo-first-order rate equation), the sorption isotherms (modeled by the Langmuir equation) are investigated. The successive modifications of magnetic chitosan increases the maximum sorption capacity from 0.28 to 0.845 and 1.25 mmol Ce g-1 (MC, MC-UR, and MC-UR/S, respectively). The bi-functionalization strongly increases the selectivity of the sorbent for Ce(III) through multi-component equimolar solutions (especially at pH 4). The functionalization notably increases the stability at recycling (for at least 5 cycles), using 0.2 M HCl for the complete desorption of cerium from the loaded sorbent. The bi-functionalized sorbent was successfully tested for the recovery of cerium from pre-treated acidic leachates, recovered from low-grade cerium-bearing Egyptian ore.

Cyanobacteria-Mediated Immune Responses in Pepper Plants against Fusarium Wilt.

Research in plant pathology has increasingly focused on developing environmentally friendly, effective strategies for controlling plant diseases. Cyanobacteria, including Desmonostoc muscorum, Anabaena oryzae, and Arthrospiraplatensis, were applied to Capsicum annuum L. to induce immunity against Fusarium wilt. Soil irrigation and foliar shoots (FS) application were used in this investigation. The disease symptoms, disease index, osmotic contents, total phenol, Malondialdehyde (MDA), hydrogen peroxide (H2O2), antioxidant enzymes (activity and isozymes), endogenous hormone content, and response to stimulation of defense resistance in infected plants were assessed. Results demonstrated that using all cyanobacterial aqueous extracts significantly reduced the risk of infection with Fusarium oxysporum. One of the most effective ways to combat the disease was through foliar spraying with Arthrospira platensis, Desmonostoc muscorum, and Anabaena oryzae (which provided 95, 90, and 69% protection percent, respectively). All metabolic resistance indices increased significantly following the application of the cyanobacterial aqueous extracts. Growth, metabolic characteristics, and phenols increased due to the application of cyanobacteria. Polyphenol oxidase (PPO) and peroxidase (POD) expressions improved in response to cyanobacteria application. Furthermore, treatment by cyanobacteria enhanced salicylic acid (SA) and Indole-3-Acetic Acid (IAA) in the infected plants while decreasing Abscisic acid (ABA). The infected pepper plant recovered from Fusarium wilt because cyanobacterial extract contained many biologically active compounds. The application of cyanobacteria through foliar spraying seems to be an effective approach to relieve the toxic influences of F. oxysporum on infected pepper plants as green and alternative therapeutic nutrients of chemical fungicides.

Validation and Evaluation of a Behavioral Circuit Model of an Enhanced Electrostatic MEMS Converter.

In this current study, the validation and evaluation of a behavioral circuit model of electrostatic MEMS converters are presented. The main objective of such a model is to accurately find the converter behavior through the proper choice of its circuit elements. In this regard, the model enables the implementation of the electrostatic MEMS converter using commercially available off-shelf circuit elements. Thus, the overall vibration energy harvesting system can be implemented and tested without the need for fabricating the converter. As a result, the converter performance can be verified and evaluated before its fabrication which saves the expenses of fabricating trailed prototypes. To test the model, we apply it to an enhanced converter in which the conventional electrostatic MEMS converter is modified by depositing the tantalum pentoxide, Ta2O5, a high dielectric constant material, on its fingers' sidewalls. Such a deposition technique causes an appreciable increase in the overall converter capacitance and, in turn, the output power, which is boosted from the range of µw to the range of mW. Next, the converter behavioral circuit model, which is based on representing its capacitances variations with respect to the input displacement, x caused by the vibration signal, C-x curve, is built up. The model is qualitatively validated and quantitatively evaluated. The enhanced converter performance is investigated through the interaction of its model with the power conditioning circuit. From the simulation results, it is revealed that the converter behavioral circuit model accurately accomplishes the vibration energy conversion operation. As a result, the specification of the required controlling pulses for the converter operation is accurately determined. Finally, the model accuracy is validated by calibrating its performance with a traditionally simulated and fabricated electrostatic MEMS converter.