TEM00 mode content measurements on a passive leakage channel fiber.

Mode content measurements with a scanning ring cavity were performed in order to determine the TEM00 mode content of the output beam profile of a resonantly enhanced leakage channel fiber. The measurements were performed at 1.0 and 1.5 µm. In addition, the influence of different bending diameters as well as launching conditions has been investigated. Furthermore, a numerical simulation was used to determine the maximum theoretical TEM00 overlap, if only the fundamental fiber mode is guided. The simulation was also used to analyze how the TEM00 overlap for the case of any additional higher order fiber mode can be determined consistently.

Impact of fiber outer boundaries on leaky mode losses in leakage channel fibers.

In a leakage channel fiber, the desired fundamental mode (FM) has negligible waveguide loss. Higher-order modes (HOM) are designed to have much higher waveguide losses so that they are practically eliminated during propagation. Coherent reflection at the fiber outer boundary can lead to additional confinement especially for highly leaky HOM, leading to lower HOM losses than what are predicted by conventional FEM mode solver considering infinite cladding. In this work, we conducted, for the first time, careful measurements of HOM losses in two leakage channel fibers (LCF) with circular and rounded hexagonal boundary shapes respectively. Impact on HOM losses from coiling, fiber boundary shapes and coating indexes were studied in comparison to simulations. This work, for the first time, demonstrates the limit of the simulation method commonly used in the large-mode-area fiber designs and the need for an improved approach. More importantly, this work also demonstrates that a deviation from circular fiber outer shape may be an effective method to mitigate HOM loss reduction from coherent reflection from fiber outer boundary, even in double-clad fibers, with HOM losses in excess of 20 dB/m measured in the hexagonal LCF with ~50 µm core diameter while keeping FM loss negligible.

Flat-top mode from a 50 µm-core Yb-doped leakage channel fiber.

We demonstrate for the first time a flat-top mode from a 50 µm-core Yb-doped leakage channel fiber (LCF). The flat intensity distribution leads to an effective mode area of ~1880 µm(2) in the straight fiber, an over 50% increase comparing to that of regular LCF with the same core diameter. The flat-top mode was achieved by using a uniform Yb-doped silica glass in the core center with an index of ~2 × 10(-4) lower than that of the silica background. The fiber was also tested in a laser configuration, demonstrating an optical-to-optical efficiency of ~77% at 1026 nm with respect to the pump at 975 nm.

Design considerations for short-wavelength operation of 790-nm-pumped Tm-doped fibers.

Tm-doped 790-nm-pumped silica fiber lasers are excellent candidates for producing emission at <1.95 microm, but achieving efficient operation at these wavelengths requires careful attention to fiber design because of the characteristic three-level reabsorption effects. We present a discussion of methods for mitigation of these effects and two high-efficiency systems that are capable of producing up to 70 W at <1.92 microm.

High-power single-polarization and single-transverse-mode fiber laser with an all-fiber cavity and fiber-grating stabilized spectrum.

Conventionally, large-mode-area (LMA) fiber lasers use free-space polarizing components to achieve linear polarization output. External components, however, significantly limit laser robustness and power scalability. We demonstrate, to the best of our knowledge, the first high-power all-fiber cavity single-polarization single-transverse-mode LMA fiber laser, without the use of free-space polarizing components. This has been achieved by using tightly coiled high-birefringence 20 microm core LMA fiber. The lasing spectrum at 1085 nm has been stabilized by a fiber grating, spliced at one end of a LMA fiber. Up to 405 W of single-polarization output with a polarization extinction of >19 dB with a narrow spectrum (1.9 nm FWHM) and in a single-transverse mode (M2 < 1.1) has been demonstrated. The simplicity of a monolithic-cavity approach is highly beneficial for a number of applications, including the use of a fiber laser for nonlinear wavelength conversion and for coherent and spectral beam combining.