Evaluation of multi-directional speed qualities throughout adolescence in youth soccer: The non-linear nature of transfer.

Training and assessment of agility is often prioritised by soccer coaches and practitioners aiming to develop multi-directional speed. Although the importance of agility is advocated throughout childhood and adolescence, limited data evidence agility performance at different stages of adolescence. The purpose of this study was to examine differences in multi-directional speed performance in youth soccer players spanning an entire soccer academy. A total of 86 male junior-elite soccer players volunteered to participate. Anthropometric data were collected, alongside performance data from a battery of physical tests including sprinting, jumping, change of direction, reaction time, and agility. Bayesian models using log-likelihoods from posterior simulations of parameter values displayed linear or curvilinear relationships between both chronological and biological age and performance in all tests other than agility and reaction time. For agility and reaction time tests, performance improved until ~14 years of age or the estimated age of peak height velocity whereby arrested development in performance was observed. Our results demonstrate that while most performance skills improve as chronological or biological age increases, measures of agility and reaction time may not. These findings support the notion that agility performance is complex and multifaceted, eliciting unique, challenging physical demands and non-linear development.

Field-testing to determine power - cadence and torque - cadence profiles in professional road cyclists.

The aim of this study was to evaluate a field-based approach to determine torque-cadence and power-cadence profiles in professional cyclists and establish if this field-based protocol can differentiate between varying rider specialisations. Twenty-four male professional athletes from a World Tour cycling team participated in this investigation (Height = 1.84 ± 0.05 m, Weight = 72.3 ± 5.6 kg, Age = 25 ± 4 y). All riders were subsequently categorised into the following groups: 1) General Classification (GC) group; 2) sprinter group; and 3) classics group. All participants completed a specific sprint protocol in the field which included 6 times 6s sprints with varying gearing, starting cadences, starting speeds and position (i.e. seated vs standing). Power-cadence and torque-cadence profiles were determined based on the sprint outputs. There was a significant main effect of rider specialisation on the measured (sprint) variables (P≤0.03). Body weight, maximum power outputs (1s, 10s and modelled) and maximum torque were highest in the sprinter group, followed by the classics group, followed by the GC group. The protocol was able to differentiate between different rider specialisations (i.e. GC, sprinters, classics). The proposed methodology can contribute to individualising training content in the short-duration domain.HighlightsCommercially available power metres can be used to assess power-cadence and torque cadence relationships in the fieldKey differences are present for the modelled parameters between cyclists of different specialisationsProfiling a cyclist's power-cadence and torque-cadence relationship provides greater insight into the physiological mechanisms behind maximal power production.

The Multidisciplinary Physical Preparation of a Multiple Paralympic Medal-Winning Cyclist.

PURPOSE: This case study aims to describe the multidisciplinary preparation of a multiple medal-winning Paralympic cyclist active in the C5 class. Specifically, it describes the 12-month preparation period toward the Tokyo 2020 Paralympic Games. METHOD: The participant (height 173 cm; weight approximately 63 kg) is active in the C5 para-cycling class (right arm impairment) and was preparing for the individual pursuit, road time trial, and mass-start race in the Tokyo Paralympic Games. The participant was supported by a multidisciplinary practitioner team focusing on multiple facets of athletic preparation. Morning resting heart rate (HR) and HR variability, as well as daily training data, were collected during the 12 months prior to Tokyo. Weekly and monthly trends in training, performance, and morning measures were analyzed. Training intensity zones were divided into zone 1 (lactate threshold, critical power). RESULTS: The participant won a silver (individual pursuit) and a bronze (time trial) medal at the Paralympic Games. Annual sums of volume and total work (in kilojoules) were, respectively, 1039 hours and 620,715 kJ. Analyzing all road sessions, 85% was spent in zone 1, 9% in zone 2, and 6% in zone 3. Physiological (eg, high training loads, hypoxic stimuli) and psychological stressors (ie, significant life events) were clearly reflected in morning HR and HR-variability responses. CONCLUSIONS: This case study demonstrates how a multidisciplinary team of specialist practitioners successfully prepared an elite Paralympic cyclist utilizing a holistic approach to training and health using data to manage allostatic load.

Differences in Performance Assessments Conducted Indoors and Outdoors in Professional Cyclists.

PURPOSE: The purpose of this study was to assess the relationship between typical performance tests among elite and professional cyclists when conducted indoors and outdoors. METHODS: Fourteen male cyclists of either UCI (Union Cycliste Internationale) Continental or UCI World Tour level (mean [SD] age 20.9 [2.8] y, mass 68.13 [7.25] kg) were recruited to participate in 4 test sessions (2 indoors and 2 outdoors) within a 14-day period, consisting of maximum mean power testing for durations of 60, 180, 300, and 840 seconds. RESULTS: Across all maximum mean power test durations, the trimmed mean power was higher outdoors compared with indoor testing (P < .05). Critical power was higher outdoors compared with indoors (+19 W, P = .005), while no difference was observed for the work capacity above critical power. Self-selected cadence was 6 rpm higher indoors versus outdoors for test durations of 60 (P = .038) and 300 seconds (P = .002). CONCLUSIONS: These findings suggest that maximal power testing in indoor and outdoor settings cannot be used interchangeably. Furthermore, there was substantial individual variation in the difference between indoor and outdoor maximum mean powers across all time durations, further highlighting the difficulty of translating results from indoor testing to outdoor on an individual level in elite populations.

Power Profile of Top 5 Results in World Tour Cycling Races.

PURPOSE: This study evaluated the power profile of a top 5 result achieved in World Tour cycling races of varying types, namely: flat sprint finish, semi-mountain race with a sprint finish, semi-mountain race with uphill finish, and mountain races (MT). METHODS: Power output data from 33 professional cyclists were collected between 2012 and 2019. This large data set was filtered so that it only included top 5 finishes in World Tour races (18 participants and 177 races). Each of these top 5 finishes were subsequently classified as flat sprint finish, semi-mountain race with uphill finish, semi-mountain race with a sprint finish, and MT based on set criteria. Maximal mean power output (MMP) for a wide range of durations (5 s to 60 min), expressed in both absolute (in Watts) and relative terms (in Watts per kilogram), were assessed for each race type. RESULT: Short-duration power outputs (<60 s), both in relative and in absolute terms, are of higher importance to be successful in flat sprint finish and semi-mountain race with a sprint finish. Longer-duration power outputs (≥3 min) are of higher importance to be successful in semi-mountain race with uphill finish and MT. In addition, relative power outputs of >10 minutes seem to be a key determining factor for success in MT. These race-type specific MMPs of importance (ie, short-duration MMPs for sprint finishes, longer-duration MMPs for races with more elevation gain) are performed at a wide range (80%-97%) of the cyclist's personal best MMP. CONCLUSIONS: This study shows that the relative importance of certain points on the power-duration spectrum varies with different race types and provides insight into benchmarks for achieving a result in a World Tour cycling race.

Assessment of bike handling during cycling individual time trials with a novel analytical technique adapted from motorcycle racing.

A methodology to study bike handling of cyclists during individual time trials (ITT) is presented. Lateral and longitudinal accelerations were estimated from GPS data of professional cyclists (n = 53) racing in two ITT of different length and technical content. Acceleration points were plotted on a plot (g-g diagram) and they were enclosed in an ellipse. A correlation analysis was conducted between the area of the ellipse and the final ITT ranking. It was hypothesised that a larger area was associated with a better performance. An analytical model for the bike-cyclist system dynamics was used to conduct a parametric analysis on the influence of riding position on the shape of the g-g diagram. A moderate (n = 27, r = -0.40, p = 0.038) and a very large (n = 26, r = -0.83, p < 0.0001) association were found between the area of the enclosing ellipse and the final ranking in the two ITT. Interestingly, this association was larger in the shorter race with higher technical content. The analytical model suggested that maximal decelerations are highly influenced by the cycling position, road slope and speed. This investigation, for the first time, explores a novel methodology that can provide insights into bike handling, a large unexplored area of cycling performance.

Progression from youth to professional soccer: A longitudinal study of successful and unsuccessful academy graduates.

To optimize use of available resources, professional academies develop strategies to assess, monitor, and evaluate players as they progress through adolescence toward adulthood. However, few published reports exist using longitudinal study designs to examine performance throughout adolescence and the transition from youth to professional soccer. We examined differences in the age of player recruitment alongside longitudinal performance differences on field-based fitness tests of successful vs. unsuccessful graduates across the entire age spectrum recruited by a professional soccer academy. Altogether, 537 youth soccer players volunteered to participate. We recorded the age of recruitment, biannual fitness test performance, and subsequent success in attaining a senior professional contract at the club across a period of 12 years. Only 53 (10%) of players were successful in obtaining a professional contract, with 68% of players who became professional being recruited at 12 years of age or older. Individuals recruited at an earlier age did not display a higher probability of success in attaining a professional contract. Bayesian regression models reported a consistent interaction between age and group for data on all performance measures. Moreover, "successful" academy graduates only physically outperformed their "unsuccessful" counterparts from age ~13-14 years onward, with either no differences in performance, or performance on physical fitness tests favoring "unsuccessful" players prior to this age. Findings suggest that high achievers during childhood and early adolescence may not develop into successful senior professionals, raising concerns about the predictive utility of talent identification models.

Maintaining Power Output with Accumulating Levels of Work Done Is a Key Determinant for Success in Professional Cycling.

INTRODUCTION: This study aimed to investigate if performance measures are related to success in professional cycling and to highlight the influence of prior work done on these performance measures and success. METHODS: Power output data from 26 professional cyclists, in a total of 85 seasons, collected between 2012 and 2019, were analyzed. The cyclists were classified as "climber" or "sprinter" and into category 1 (CAT.1; ≥400 PCSpoints (successful)) and CAT.2 (<400 PCSpoints (less successful)), based on the number of procyclingstats-points (PCSpoints) collected for that particular season. Maximal mean power outputs (MMP) for 20 min, 5 min, 1 min, and 10 s relative to body weight for every season were determined. To investigate the influence of prior work done on these MMP values, six different levels of completed work done were determined, which are based on the amount of completed kilojoules per kilogram (0, 10, 20, 30, 40, and 50 kJ·kg-1). Subsequently, the decline in MMP for each duration (if any) after each level of completed work done was evaluated. RESULTS: Mixed model revealed that prior work done affects the performance of climbers and sprinters negatively. However, CAT.1 climbers have a smaller decline in 20- and 5-min MMP after high amounts of work done compared with CAT.2 climbers. Similarly, CAT.1 sprinters have a smaller decline in 10-s and 1-min MMP after high amounts of work done compared with CAT.2 sprinters. CONCLUSIONS: It seems that the ability to maintain high MMP (corresponding with the specialization of a cyclist) after high amounts of work done (i.e., fatigue) is an important parameter for success in professional cyclists. These findings suggest that assessing changes in MMP after different workloads might be highly relevant in professional cycling.

Demands of professional cycling races: Influence of race category and result.

This study analyses the influence of race category and result on the demands of professional cycling races. In total, 2920 race files were collected from 20 male professional cyclists, within a variety of race categories: Single-day (1.WT) and multi-day (2.WT) World Tour races, single-day (1.HC) and multi-day (2.HC) Hors Catégorie races and single-day (1.1) and multi-day (2.1) category 1 races. Additionally, the five cycling "monuments" were analysed separately. Maximal mean power outputs (MMP) were measured across a broad range of durations. Volume and load were large to very largely (d = 1.30-4.80) higher in monuments compared to other single-day race categories. Trivial to small differences were observed for most intensity measures between different single-day race categories, with only RPE and sRPE·km-1 being moderately (d = 0.70-1.50) higher in the monuments. Distance and duration were small to moderately (d = 0.20-0.80) higher in 2.WT races compared to 2.HC and 2.1 multi-day race categories with only small differences in terms of load and intensity. Generally, higher ranked races (i.e. Monuments, 2.WT and GT) tend to present with lower shorter-duration MMPs (e.g. 5-120 sec) compared to races of "lower rank" (with less differences and/or mixed results being present over longer durations), potentially caused by a "blunting" effect of the higher race duration and load of higher ranked races on short duration MMPs. MMP were small to largely higher over shorter durations (<5 min) for a top-10 result compared to no top-10, within the same category.

The Physical Demands and Power Profile of Professional Men's Cycling Races: An Updated Review.

BACKGROUND: A variety of intensity, load, and performance measures (eg, "power profile") have been used to characterize the demands of professional cycling races with differing stage types. An increased understanding of the characteristics of these races could provide valuable insight for practitioners toward the design of training strategies to optimally prepare for these demands. However, current reviews within this area are outdated and do not include a recent influx of new articles describing the demands of professional cycling races. PURPOSE: To provide an updated overview of the intensity and load demands and power profile of professional cycling races. Typically adopted measures are introduced and their results summarized. CONCLUSION: There is a clear trend in the research that stage type significantly influences the intensity, load, and power profile of races with more elevation gain typically resulting in a higher intensity and load and longer-duration power outputs (ie, >10 min). Flat and semimountainous stages are characterized by higher maximal mean power outputs over shorter durations (ie, <2 min). Furthermore, single-day races tend to have a higher (daily) intensity and load compared with stages within multiday races. Nevertheless, while the presented mean (grouped) data provide some indications on the demands of these races and differences between varying competition elements, a limited amount of research is available describing the "race-winning efforts" in these races, and this is proposed as an important area for future research. Finally, practitioners should consider the limitations of each metric individually, and a multivariable approach to analyzing races is advocated.

A case study comparison of objective and subjective evaluation methods of physical qualities in youth soccer players.

Subjective and objective assessments may be used congruently when making decisions regarding player recruitment in soccer, yet there have been few attempts to examine the level of agreement between these methods. Therefore, we compare levels of agreement between subjective and objective assessments of physical qualities associated with youth soccer performance. In total, 80 male youth soccer players (13.2 ± 1.9 years), and 12 professional coaches volunteered to participate. Players were objectively assessed using five fitness measures: Yo-Yo Intermittent Recovery Test Level 1; Countermovement vertical jump; Functional Movement Screen™; 5/20 m sprint; alongside anthropometric measures. Additionally, coaches subjectively rated each player on the same five physical qualities using 5-point Likert scales. Inter-rater agreement between ratings from lead and assistant coaches was established for each age group. Moreover, Bayesian regression models were fitted to determine how well coach ratings were able to predict fitness test performance. Although inter-rater agreement between lead and assistant coaches was moderate-to-substantial (ω = 0.48-0.68), relationships between coaches subjective rating's and corresponding fitness test performance were only highly related for the highest and lowest performing players. We suggest that while ratings derived from objective and subjective assessment methods may be related when attempting to differentiate between distinct populations, concerns exist when evaluating homogeneous samples using these methods. Our data highlight the benefits of using both types of measures in the talent identification process.

Reliability and Validity of Integrated External and Internal Load Ratios as Measures of Fitness in Academy Rugby Union Players.

Taylor, RJ, Sanders, D, Myers, T, and Akubat, I. Reliability and validity of integrated external and internal load ratios as measures of fitness in academy rugby union players. J Strength Cond Res 34(6): 1723-1730, 2020-This study aimed to assess the relationships between integrated ratios of external and internal load measures and aerobic fitness in 3 different training exercise protocols. Twelve academy rugby union players (aged; 17.6 ± 0.44 years, height; 179.4 ± 6.3 cm, body mass 83.3 ± 9.7 kg) performed a lactate threshold/V[Combining Dot Above]O2max test (LT/V[Combining Dot Above]O2max) followed by 3 exercise protocols; 760 m continuous shuttle running (20 m shuttle run at 9 km·h), sprint interval training (SIT: 6 × 6 seconds sprint with 54 seconds recovery), and a small-sided game (SSG: 6 vs. 6, 10 minutes on a 39 × 51 m pitch) on 2 occasions. A LT/V[Combining Dot Above]O2max test was used to determine velocity at lactate threshold (vLT) and at the onset of blood lactate accumulation (vOBLA), maximal oxygen uptake (V[Combining Dot Above]O2max) and the heart rate-blood lactate profile for the calculation of internal load (individualized training impulse or iTRIMP). The total distance (TD), PlayerLoad, metabolic power (MP), high-speed distance >15 km·h (HSD), very high-speed distance >18 km·h (VHSD) and individualized high-speed distance based on each player's vOBLA (iHSD) for the 3 exercise protocols were measured using Micro Electro Mechanical Systems/Global Positioning System technology. Bayesian analysis was used to assess the ratios validity and reliability. Ratios demonstrated large-to-very large associations with vOBLA (Rho = 0.64-0.76), vLT (Rho = 0.63-0.71). Reliability of the ratios ranged from 7.06 to 36.28% (coefficient of variation [CV]%). The results suggest that integrated load ratios from the SIT and SSG protocols provide a measure which is reliable with large-to-very large associations to submaximal aerobic fitness in rugby union.

Effects of Body Weight vs. Lean Body Mass on Wingate Anaerobic Test Performance in Endurance Athletes.

The aim of this study was to determine the influence of body weight or lean body mass-based load on Wingate Anaerobic Test performance in male and female endurance trained individuals. Thirty-one participants (22 male cyclists and triathletes and 9 female triathletes) completed two randomized Wingate Anaerobic Test (body weight and lean body mass loads) in stationary start. There were no significant differences in power outputs variables between loads in any group. However, when comparing specific groups within the sample (e. g. cyclists vs cyclists) medium to large effect sizes were observed for Relative Mean Power Output (ES=0.53), Relative Lowest Power (ES=0.99) and Relative Power Muscle Mass (ES=0.54). Regarding gender differences, male cyclists and triathletes displayed higher relative and absolute power outputs (p<0.001) compared to female triathletes regardless of the protocol used. FI was lower in female triathletes compared to male triathletes and cyclists in body weight (p<0.001) and lean body mass (p<0.01) protocols. Body composition and anthropometric characteristics were similar in male cyclists and triathletes, but there were differences between genders. These results suggest that using either body weight-based or lean body mass-based load can be used interchangeably. However, there may be some practically relevant differences when evaluating this on an individual level.

Reliability of Change of Direction and Agility Assessments in Youth Soccer Players.

Considering the vast physical and neural developments experienced throughout adolescence, the reliability of physical performance may vary in youth populations. This study aimed to examine the reliability of change of direction (COD) and agility tests in youth soccer players. Altogether, 86 youth soccer players, aged 13.6 ± 2.0 years, volunteered to participate. Data were collected from a modified 505 COD test (m505COD) and the Y-sprint drill in both pre-planned (Y-SprintPRE) and reactive (Y-SprintREACT) conditions during 2 sessions, 7 days apart. Anthropometric data including body mass, standing stature, and sitting height were also collected. COD and agility tests demonstrated good reliability (ICC = 0.81-0.91; CV = 1.2-2.0; d = 0.00-0.31; p < 0.01) for our entire sample. However, we observed a small negative relationship between age and intersession differences for the Y-SprintPRE (r = -0.28; p = 0.04), and moderate negative relationships between both age (r = -0.41; p < 0.01), and maturity offset (r = -0.39; p < 0.01) for the Y-SprintREACT. Although the COD and agility tests adopted within this study possess good intersession reliability, we observed greater intersession differences for younger and less mature individuals. We suggest that while COD and agility tests may provide meaningful objective data for monitoring the development of youth soccer players, these tests should be used with caution when evaluating younger, more immature athletes.

A Field-Based Cycling Test to Assess Predictors of Endurance Performance and Establishing Training Zones.

Sanders, D, Taylor, RJ, Myers, T, and Akubat, I. A field-based cycling test to assess predictors of endurance performance and establishing training zones. J Strength Cond Res 34(12): 3482-3488, 2020-This study evaluates the relationship between a field-based 8-minute time trial (8MTT) and physiological endurance variables assessed with an incremental laboratory test. Second, lactate thresholds assessed in the laboratory were compared with estimated functional threshold power (FTP) from the 8MTT. Nineteen well-trained road cyclists (aged 22 ± 2 years, height 185.9 ± 4.5 cm, body mass 72.8 ± 4.6 kg, V[Combining Dot Above]O2max 64 ± 4 ml·min·kg) participated. Linear regression revealed that mean 8MTT power output (PO) was strongly to very strongly related to PO at 4 mmol·L, PO at initial rise of 1.00 mmol·L, PO at Dmax and modified (mDmax) (r = 0.61-0.82). Mean 8MTT PO was largely to very largely different compared with PO at fixed blood lactate concentration of 2 mmol·L (ES = 3.20) and 4 mmol·L (ES = 1.90), PO at initial rise 1.00 mmol·L (ES = 2.33), PO at Dmax (ES = 3.47) and mDmax (ES = 1.79) but only trivially different from maximal PO (Wmax) (ES = 0.09). The 8MTT based estimated FTP was moderate to very largely different compared with PO at initial rise of 1 mmol·L (ES = 1.37), PO at Dmax (ES = 2.42), PO at mDmax (ES = 0.77) and PO at 4 mmol·L (ES = 0.83). Therefore, even though the 8MTT can be valuable as a performance test in cycling shown through its relationships with predictors of endurance performance, coaches should be cautious when using FTP and PO at laboratory-based thresholds interchangeably to inform training prescription.

Training Characteristics of Male and Female Professional Road Cyclists: A 4-Year Retrospective Analysis.

PURPOSE: To describe the training intensity and load characteristics of professional cyclists using a 4-year retrospective analysis. Particularly, this study aimed to describe the differences in training characteristics between men and women professional cyclists. METHOD: For 4 consecutive years, training data were collected from 20 male and 10 female professional cyclists. From those training sessions, heart rate, rating of perceived exertion, and power output (PO) were analyzed. Training intensity distribution as time spent in different heart rate and PO zones was quantified. Training load was calculated using different metrics such as Training Stress Score, training impulse, and session rating of perceived exertion. Standardized effect size is reported as Cohen's d. RESULTS: Small to large higher values were observed for distance, duration, kilojoules spent, and (relative) mean PO in men's training (d = 0.44-1.98). Furthermore, men spent more time in low-intensity zones (ie, zones 1 and 2) compared with women. Trivial differences in training load (ie, Training Stress Score and training impulse) were observed between men's and women's training (d = 0.07-0.12). However, load values expressed per kilometer were moderately (d = 0.67-0.76) higher in women compared with men's training. CONCLUSIONS: Substantial differences in training characteristics exist between male and female professional cyclists. Particularly, it seems that female professional cyclists compensate their lower training volume, with a higher training intensity, in comparison with male professional cyclists.

Intensity and Load Characteristics of Professional Road Cycling: Differences Between Men's and Women's Races.

PURPOSE: To provide a retrospective analysis of a large competition database describing the intensity and load demands of professional road-cycling races, highlighting the differences between men's and women's races. METHODS: In total, 20 male and 10 female professional cyclists participated in this study. During 4 consecutive years, heart rate, rating of perceived exertion, and power-output data were collected during both men's (n = 3024) and women's (n = 667) professional races. Intensity distribution in 5 heart-rate zones was quantified. Competition load was calculated using different metrics, including Training Stress Score (TSS), training impulse (TRIMP), and session rating of perceived exertion. Standardized effect size is reported as Cohen d. RESULTS: Large to very large higher values (d = 1.36-2.86) were observed for distance, duration, total work (in kilojoules), and mean power output in men's races. Time spent in high-intensity heart-rate zones (ie, zones 4 and 5) was largely higher in women's races (d = 1.38-1.55) than in men's races. Small higher loads were observed in men's races quantified using TSS (d = 0.53) and TRIMP (d = 0.23). However, load metrics expressed per kilometer were large to very largely higher in women's races for TSS·km-1 (d = 1.50) and TRIMP·km-1 (d = 2.31). CONCLUSIONS: Volume and absolute load are higher in men's races, whereas intensity and time spent in high-intensity zones is higher in women's races. Coaches and practitioners should consider these differences in demands in the preparation of professional road cyclists.

Sleep Profiles of Elite Swimmers During Different Training Phases.

Walsh, JA, Sanders, D, Hamilton, DL, and Walshe, I. Sleep profiles of elite swimmers during different training phases. J Strength Cond Res 33(3): 811-818, 2019-This study aims to describe the sleeping patterns during different training phases in competitive swimmers. Twelve national- and international-level swimmers (3 females and 9 males) were monitored during 4 different phases, consisting of a preparation training phase, a taper phase, a competition phase, and a rest phase. Sleep parameters were assessed using wrist activity monitors and self-reported sleep diaries. There was a moderately higher (d = 0.70-1.00) sleep onset latency during the competition phase compared with taper, train, and rest phases. Trivial to small differences were observed for total sleep time between phases (d = 0.05-0.40). Sleep efficiency was moderately higher (d = 0.60-0.75) in the training and taper phases compared with competition and rest. Restfulness and fragmentation index (FI) were lowest in the rest with differences between phases being small (d = 0.43-0.51) for restfulness and small to moderate (d = 0.43-0.62) for FI. Time in and out of bed was very largely later (d = 1.96-2.34) in rest compared with the other phases. Total nap time was moderately lower in rest (d = 1.13-1.18) compared with the training and competition phases, whereas there was a small difference (d = 0.46) compared with taper. To conclude, while there were trivial to small differences in sleep quantity between phases, there are small to moderate differences in other sleep parameters. Specifically, sleep onset latency was higher during the competition phase. In addition, this study highlights the substantial between-individual variations in sleep responses during different training phases.

The anaerobic power reserve and its applicability in professional road cycling.

This study examined if short-duration record power outputs can be predicted with the Anaerobic Power Reserve (APR) model in professional cyclists using a field-based approach. Additionally, we evaluated if modified model parameters could improve predictive ability of the model. Twelve professional cyclists (V̇O2max 75 ± 6 ml∙kg-1∙min-1) participated in this investigation. Using the mean power output during the last stage of an incremental field test, sprint peak power output and an exponential constant describing the decrement in power output over time, a power-duration relationship was established for each participant. Record power outputs of different durations (5 to 180 s) were collected from training and competition data and compared to the predicted power output from the APR model. The originally proposed exponent (k = 0.026) predicted performance within an average of 43 W (Standard Error of Estimate (SEE) of 32 W) and 5.9%. Modified model parameters slightly improved predictive ability to a mean of 34-39 W (SEE of 29 - 35 W) and 4.1 - 5.3%. This study shows that a single exponent model generally fits well with the decrement in power output over time in professional cyclists. Modified model parameters may contribute to improving predictability of the model.