Tuning the Pharmacokinetic Performance of Quercetin by Cocrystallization.

Quercetin (QUE) is a widely studied nutraceutical with a number of potential therapeutic properties. Although QUE is abundant in the plant kingdom, its poor solubility (≤20 µg/mL) and poor oral bioavailability have impeded its potential utility and clinical development. In this context, cocrystallization has emerged as a useful method for improving the physicochemical properties of biologically active molecules. We herein report a novel cocrystal of the nutraceutical quercetin (QUE) with the coformer pentoxifylline (PTF) and a solvate of a previously reported structure between QUE and betaine (BET). We also report the outcomes of in vitro and in vivo studies of QUE release and absorption from a panel of QUE cocrystals: betaine (BET), theophylline (THP), l-proline (PRO), and novel QUEPTF. All cocrystals were found to exhibit an improvement in the dissolution rate of QUE. Further, the QUE plasma levels in Sprague-Dawley rats showed a 64-, 27-, 10- and 7-fold increase in oral bioavailability for QUEBET·MeOH, QUEPTF, QUEPRO, and QUETHP, respectively, compared to QUE anhydrate. We rationalize our in vivo and in vitro findings as the result of dissolution-supersaturation-precipitation behavior.

Polymorphism in Ionic Cocrystals Comprising Lithium Salts and l-Proline.

The occurrence of polymorphism in ionic cocrystals formed by two lithium salts, lithium salicylate (LIS) and lithium 4-methoxybenzoate (L4M), and l-proline (PRO) has been investigated. The previously reported monoclinic form of the 1:1 cocrystal of LIS and PRO, LISPRO(α), and a new thermodynamically stable orthorhombic polymorph, LISPRO(ß), were prepared and characterized. The two polymorphs form square grid, sql, topology coordination networks and differ mainly in the conformation of the salicylate ions and positioning of the sql nets. LISPRO(α) was observed to transform to LISPRO(ß) under slurry conditions. The 1:1 ionic cocrystal of L4M and PRO (L4MPRO) was found to form three polymorphs. Apart from the previously reported orthorhombic crystal form, L4MPRO(α), two new monoclinic crystal forms, L4MPRO(ß) and L4MPRO(γ), were obtained by modifying crystallization conditions. The new polymorphs were found to be metastable, undergoing transformations to L4MPRO(α) upon exposure to humidity. Experimental conditions that induce transformations between the polymorphs of LISPRO and L4MPRO are detailed, and the structural differences between the polymorphs are discussed in the broader context of polymorphism.

Crystal Engineering of Ionic Cocrystals Sustained by the Phenol-Phenolate Supramolecular Heterosynthon.

Although crystal engineering strategies are generally well explored in the context of multicomponent crystals (cocrystals) formed by neutral coformers (molecular cocrystals), cocrystals comprised of one or more salts (ionic cocrystals, ICCs) are understudied. We herein address the design, preparation, and structural characterization of ICCs formed by phenolic moieties, a common group in natural products and drug molecules. Organic and inorganic bases were reacted with the following phenolic coformers: phenol, resorcinol, phloroglucinol, 4-methoxyphenol, and 4-isopropylphenol. Nine ICCs were crystallized, each of them sustained by the phenol-phenolate supramolecular heterosynthon (PhOH···PhO-). Such ICCs are of potential utility, and there are numerous examples of phenolic compounds that are biologically active, some of which suffer from low aqueous solubility. The propensity to form ICCs sustained by the PhOH···PhO- supramolecular heterosynthon was evaluated through a combination of Cambridge Structural Database (CSD) mining, structural characterization of nine novel ICCs, and calculation of interaction energies. Our analysis of these 9 ICCs and the 41 relevant entries archived in the CSD revealed that phenol groups can reliably form ICCs through charge-assisted PhOH···PhO- interactions. This conclusion is supported by hydrogen-bond strength calculations derived from CrystalExplorer that reveal the PhOH···PhO- interaction to be around 3 times stronger than the phenol-phenol hydrogen bond. The PhOH···PhO- supramolecular heterosynthon could therefore enable crystal engineering studies of a large number of phenolic pharmaceutical and nutraceutical compounds with their conjugate bases.

NUIG4: A biocompatible pcu metal-organic framework with an exceptional doxorubicin encapsulation capacity.

Metal-organic frameworks (MOFs) are promising multifunctional porous materials for biomedical and environmental applications. Here, we report synthesis and characterization of a new MOF based on the tetrahedral secondary building unit [Zn4O(CBAB)3]n (NUIG4), where CBABH2 = 4-((4-carboxybenzylidene)amino)benzoic acid. NUIG4 belongs to the family of MOFs with primitive cubic pcu topology, being a rare example with 4-fold interpenetration. The pore architecture enables unprecedentedly high doxorubicin (DOX) loading capacity (1955 mg DOX/g NUIG4) with pH-controlled release. Solid-state NMR and ab initio modeling confirmed formation of aromatic π-π stacking interactions between DOX and the framework. Preliminary cell-line experiments suggested a protective effect of NUIG4 on healthy HDF cells against DOX toxicity. NUIG4 also displays potential for adsorptive small-molecule gas separation, with a BET surface area of 1358 m2 g-1 and high selectivity of 2.75 for C2H2 over CO2.

A Piezoelectric Ionic Cocrystal of Glycine and Sulfamic Acid.

Cocrystallization of two or more molecular compounds can dramatically change the physicochemical properties of a functional molecule without the need for chemical modification. For example, coformers can enhance the mechanical stability, processability, and solubility of pharmaceutical compounds to enable better medicines. Here, we demonstrate that amino acid cocrystals can enhance functional electromechanical properties in simple, sustainable materials as exemplified by glycine and sulfamic acid. These coformers crystallize independently in centrosymmetric space groups when they are grown as single-component crystals but form a noncentrosymmetric, electromechanically active ionic cocrystal when they are crystallized together. The piezoelectricity of the cocrystal is characterized using techniques tailored to overcome the challenges associated with measuring the electromechanical properties of soft (organic) crystals. The piezoelectric tensor of the cocrystal is mapped using density functional theory (DFT) computer models, and the predicted single-crystal longitudinal response of 2 pC/N is verified using second-harmonic generation (SHG) and piezoresponse force microscopy (PFM). The experimental measurements are facilitated by polycrystalline film growth that allows for macroscopic and nanoscale quantification of the longitudinal out-of-plane response, which is in the range exploited in piezoelectric technologies made from quartz, aluminum nitride, and zinc oxide. The large-area polycrystalline film retains a damped response of ≥0.2 pC/N, indicating the potential for application of such inexpensive and eco-friendly amino acid-based cocrystal coatings in, for example, autonomous ambient-powered devices in edge computing.

Reversible single-crystal to single-crystal phase transformation between a new Werner clathrate and its apohost.

In this work, we report the synthesis and structural characterisation of the ligand 2-(pyridin-3-yl)-benzo[de]isoquinoline-1,3(2H)-dione, 5, its isostructural Werner complexes ML4(NCS)2 (L = 5; M = Co(II) and Ni(II)), and five clathrates with three aromatic guests, ML4(NCS)2·2G (M = Co(II) and Ni(II), G = nitrobenzene (NB); M = Co, G = 1,2-dichlorobenzene (1,2-DCB); M = Co(II) and Ni(II), G = o-xylene (OX)). 5 was prepared in high yield by condensation in the solid-state (C3S3, Cocrystal Controlled Solid-State Synthesis). The Werner complexes ML4(NCS)2 (M = Co(II) and Ni(II)) (apohosts) were prepared by reacting M(NCS)2 (M = Co(II) and Ni(II)) and 5 in 1-butanol at 60 °C for 24 h. The Werner clathrates were prepared by reacting M(NCS)2 (M = Co(II) and Ni(II)), G and 5 in 1-butanol at 60 °C for 48-96 h. The clathrates were observed to transform to the apohost ML4(NCS)2 upon heating. CoL4(NCS)2·2NB was subsequently regenerated by exposing CoL4(NCS)2 to liquid NB at 60 °C for 48 h. This phase change occurred as a single-crystal to single-crystal phase transformation and was studied by single crystal X-ray diffraction, powder X-ray diffraction and thermal analyses. Structural analyses of the apohost CoL4(NCS)2 and its Werner clathrate CoL4(NCS)2·2NB indicated that rotational freedom of the Co-N bonds together with torsional flexibility of the ligand between the imide bond and the pyridine moiety are key to enabling the structural switching induced by exposure to NB or its removal.

Toward an Understanding of the Propensity for Crystalline Hydrate Formation by Molecular Compounds. Part 2.

The propensity of molecular organic compounds to form stoichiometric or nonstoichiometric crystalline hydrates remains a challenging aspect of crystal engineering and is of practical relevance to fields such as pharmaceutical science. In this work, we address the propensity for hydrate formation of a library of eight compounds comprised of 5- and 6-membered N-heterocyclic aromatics classified into three subgroups: linear dipyridyls, substituted Schiff bases, and tripodal molecules. Each molecular compound studied possesses strong hydrogen bond acceptors and is devoid of strong hydrogen bond donors. Four methods were used to screen for hydrate propensity using the anhydrate forms of the molecular compounds in our library: water slurry under ambient conditions, exposure to humidity, aqueous solvent drop grinding (SDG), and dynamic water vapor sorption (DVS). In addition, crystallization from mixed solvents was studied. Water slurry, aqueous SDG, and exposure to humidity were found to be the most effective methods for hydrate screening. Our study also involved a structural analysis using the Cambridge Structural Database, electrostatic potential (ESP) maps, full interaction maps (FIMs), and crystal packing motifs. The hydrate propensity of each compound studied was compared to a compound of the same type known to form a hydrate through a previous study of ours. Out of the eight newly studied compounds (herein numbered 4-11), three Schiff bases were observed to form hydrates. Three crystal structures (two hydrates and one anhydrate) were determined. Compound 6 crystallized as an isolated site hydrate in the monoclinic space group P21/a, while 7 and 10 crystallized in the monoclinic space group P21/c as a channel tetrahydrate and an anhydrate, respectively. Whereas we did not find any direct correlation between the number of H-bond acceptors and either hydrate propensity or the stoichiometry of the resulting hydrates, analysis of FIMs suggested that hydrates tend to form when the corresponding anhydrate structure does not facilitate intermolecular interactions.

Expanding the NUIG MOF family: synthesis and characterization of new MOFs for selective CO2 adsorption, metal ion removal from aqueous systems, and drug delivery applications.

Metal organic frameworks (MOFs) have attracted considerable attention in recent years due to their use in a wide range of environmental, industrial and biomedical applications. The employment of benzophenone-4,4'-dicarboxylic acid (bphdcH2) in MOF chemistry provided access to the 3D mixed metal MOFs [CoNa2(bphdc)2(DMF)2]n (NUIG2) and [ZnK2(bphdc)2(DMF)2]n (NUIG3), and the 2D homometallic MOF [Co2(OH)(bphdcH)2(DMF)2(H2O)2]n(OH)·DMF (1·DMF). 1·DMF is based on a dinuclear SBU and consists of interpenetrating networks with an sql topology. Dc magnetic susceptibility studies were carried out in 1·DMF and revealed the presence of weak antiferomagnetic exchange interactions between the metal centres. NUIG2 and NUIG3 are structural analogues of [ZnNa2(bphdc)2(DMF)2]n (NUIG1), which has shown an exceptionally high encapsulation for ibuprophen (Ibu), NO and metal ions. Both NUIG2 and NUIG3 display high metal ion (CoII, NiII, CuII) adsorption capacity, comparable to that of NUIG1, with NUIG2 exhibiting good performance in Ibu uptake (780 mg Ibu per g NUIG2). Monte Carlo simulations were conducted in NUIG1 in order to assess its adsorption capacity for other guest molecules, and revealed that it possesses an outstanding CO2 uptake at ambient pressure, which is larger than that of the previously reported best functioning species (104 vs. 100 cm3 (stp) per cm3). Furthermore, NUIG1 exhibits high selectivity for CO2 over CH4.

Solvent-directed control over the topology of entanglement in square lattice (sql) coordination networks.

We report herein that the mode of entanglement in square lattice, sql, coordination networks formed by an extended bis-imidazole ligand, L, can be controlled by the solvent used during solvothermal synthesis. [ML2(NO3)2]n (M = Co, Ni) exhibit both parallel 2D → 2D interpenetration and, unusually, mixed entanglement (parallel-inclined 2D → 3D polycatenation).

Flue-gas and direct-air capture of CO2 by porous metal-organic materials.

Sequestration of CO2, either from gas mixtures or directly from air (direct air capture), is a technological goal important to large-scale industrial processes such as gas purification and the mitigation of carbon emissions. Previously, we investigated five porous materials, three porous metal-organic materials (MOMs), a benchmark inorganic material, ZEOLITE 13X: and a chemisorbent, TEPA-SBA-15: , for their ability to adsorb CO2 directly from air and from simulated flue-gas. In this contribution, a further 10 physisorbent materials that exhibit strong interactions with CO2 have been evaluated by temperature-programmed desorption for their potential utility in carbon capture applications: four hybrid ultramicroporous materials, SIFSIX-3-CU: , DICRO-3-NI-I: , SIFSIX-2-CU-I: and MOOFOUR-1-NI: ; five microporous MOMs, DMOF-1: , ZIF-8: , MIL-101: , UIO-66: and UIO-66-NH2: ; an ultramicroporous MOM, NI-4-PYC: The performance of these MOMs was found to be negatively impacted by moisture. Overall, we demonstrate that the incorporation of strong electrostatics from inorganic moieties combined with ultramicropores offers improved CO2 capture performance from even moist gas mixtures but not enough to compete with chemisorbents.This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.