Validation of a membrane touch biosensor for the qualitative detection of IgG class antibodies to herpes simplex virus type 2.

A novel type of biosensor was assessed for application to the qualitative determination of circulating antibodies to herpes simplex virus type 2 (HSV-2). The device utilises a high activity HSV-2 type specific gG2 antigen for antibody capture and commercially available ELISA reagents. The study compares the diagnostic performance of a prototype HSV-2 biochip to well-established in vitro tests routinely applied in clinical procedures. A panel of human serum samples (n = 60) previously characterised for HSV-2 serological status using the DiaSorin LIAISON® HSV-2 chemiluminescent immunoassay were assayed on the HSV-2 biochip and the Focus Diagnostics HerpeSelect® 2 ELISA IgG kit to determine concordance with the predicate test method. Sensitivity and specificity of the HSV-2 biochip were found comparable to both the DiaSorin and Focus test methods. Sample index values calculated from the immunoassay response of the biochip's coulometric sensors indicated a high degree of linear correlation of the dataset with the corresponding index values from the DiaSorin LIAISON® test (r2 0.8799) and Focus HerpeSelect® test (r2 0.8794). The HSV-2 biochip demonstrated excellent diagnostic performance in qualitative and semi-quantitative measurements, matching closely the performance of two diagnostic industry standard predicate methods.

Ultrafast Electron Transfer Kinetics of Graphene Grown by Chemical Vapor Deposition.

High electrochemical reactivity is required for various energy and sensing applications of graphene grown by chemical vapor deposition (CVD). Herein, we report that heterogeneous electron transfer can be remarkably fast at CVD-grown graphene electrodes that are fabricated without using the conventional poly(methyl methacrylate) (PMMA) for graphene transfer from a growth substrate. We use nanogap voltammetry based on scanning electrochemical microscopy to obtain very high standard rate constants k(0) ≥25 cm s(-1) for ferrocenemethanol oxidation at polystyrene-supported graphene. The rate constants are at least 2-3 orders of magnitude higher than those at PMMA-transferred graphene, which demonstrates an anomalously weak dependence of electron-transfer rates on the potential. Slow kinetics at PMMA-transferred graphene is attributed to the presence of residual PMMA. This unprecedentedly high reactivity of PMMA-free CVD-grown graphene electrodes is fundamentally and practically important.

Origins of nanoscale damage to glass-sealed platinum electrodes with submicrometer and nanometer size.

Glass-sealed Pt electrodes with submicrometer and nanometer size have been successfully developed and applied for nanoscale electrochemical measurements such as scanning electrochemical microscopy (SECM). These small electrodes, however, are difficult to work with because they often lose a current response or give a low SECM feedback in current-distance curves. Here we report that these problems can be due to the nanometer-scale damage that is readily and unknowingly made to the small tips in air by electrostatic discharge or in electrolyte solution by electrochemical etching. The damaged Pt electrodes are recessed and contaminated with removed electrode materials to lower their current responses. The recession and contamination of damaged Pt electrodes are demonstrated by scanning electron microscopy and X-ray energy dispersive spectroscopy. The recessed geometry is noticeable also by SECM but is not obvious from a cyclic voltammogram. Characterization of a damaged Pt electrode with recessed geometry only by cyclic voltammetry may underestimate electrode size from a lower limiting current owing to an invalid assumption of inlaid disk geometry. Significantly, electrostatic damage can be avoided by grounding a Pt electrode and nearby objects, most importantly, an operator as a source of electrostatic charge. Electrochemical damage can be avoided by maintaining potentiostatic control of a Pt electrode without internally disconnecting the electrode from a potentiostat between voltammetric measurements. Damage-free Pt electrodes with submicrometer and nanometer sizes are pivotal for reliable and quantitative nanoelectrochemical measurements.

Generalized theory for nanoscale voltammetric measurements of heterogeneous electron-transfer kinetics at macroscopic substrates by scanning electrochemical microscopy.

Here we report on a generalized theory for scanning electrochemical microscopy to enable the voltammetric investigation of a heterogeneous electron-transfer (ET) reaction with arbitrary reversibility and mechanism at the macroscopic substrate. In this theory, we consider comprehensive nanoscale experimental conditions where a tip is positioned at a nanometer distance from a substrate to detect the reactant or product of a substrate reaction at any potential in the feedback or substrate generation/tip collection mode, respectively. Finite element simulation with the Marcus-Hush-Chidsey formalism predicts that a substrate reaction under the nanoscale mass transport conditions can deviate from classical Butler-Volmer behavior to enable the precise determination of the standard ET rate constant and reorganization energy for a redox couple from the resulting tip current-substrate potential voltammogram as obtained at quasi-steady state. Simulated voltammograms are generalized in the form of analytical equations to allow for reliable kinetic analysis without the prior knowledge of the rate law. Our theory also predicts that a limiting tip current can be controlled kinetically to be smaller than the diffusion-limited current when a relatively inert electrode material is investigated under the nanoscale voltammetric conditions.

Microneedle array-based carbon paste amperometric sensors and biosensors.

The design and characterization of a microneedle array-based carbon paste electrode towards minimally invasive electrochemical sensing are described. Arrays consisting of 3 × 3 pyramidal microneedle structures, each with an opening of 425 µm, were loaded with a metallized carbon paste transducer. The renewable nature of carbon paste electrodes enables the convenient packing of hollow non-planar microneedles with pastes that contain assorted catalysts and biocatalysts. Smoothing the surface results in good microelectrode-to-microelectrode uniformity. Optical and scanning electron micrographs shed useful insights into the surface morphology at the microneedle apertures. The attractive performance of the novel microneedle electrode arrays is illustrated in vitro for the low-potential detection of hydrogen peroxide at rhodium-dispersed carbon paste microneedles and for lactate biosensing by the inclusion of lactate oxidase in the metallized carbon paste matrix. Highly repeatable sensing is observed following consecutive cycles of packing/unpacking the carbon paste. The operational stability of the array is demonstrated as well as the interference-free detection of lactate in the presence of physiologically relevant levels of ascorbic acid, uric acid, and acetaminophen. Upon addressing the biofouling effects associated with on-body sensing, the microneedle carbon paste platform would be attractive for the subcutaneous electrochemical monitoring of a number of physiologically relevant analytes.

Sensitive electrochemical detection of superoxide anion using gold nanoparticles distributed poly(methyl methacrylate)-polyaniline core-shell electrospun composite electrode.

In the present communication, a novel composite nanofibrous electrode is developed for the detection of superoxide anion (O(2)˙(-)) in phosphate buffered saline (PBS). The composite fiber electrode is fabricated by dispersing gold nanoparticles onto poly(methyl methacrylate) (PMMA)-polyaniline (PANI) core-shell electrospun nanofibers. The constructed architecture is proven to be a favorable environment for the immobilization of the enzyme, superoxide dismutase (SOD). Direct electron transfer is achieved between SOD and the electrode with an electron transfer rate constant of 8.93 s(-1). At an applied potential of +300 mV, PMMA/PANI-Au(nano)/SOD-ESCFM shows highly sensitive detection of O(2)˙(-). In addition to this, quantification of different activities of SOD is realized at PMMA/PANI-Au(nano)/SOD-ESCFM. These analytical features offer great potential for construction of the third-generation O(2)˙(-) biosensor.

Development of amperometric α-ketoglutarate biosensor based on ruthenium-rhodium modified carbon fiber enzyme microelectrode.

A rapid and highly sensitive miniaturized amperometric biosensor for the detection of α-ketoglutarate (α-KG) based on a carbon fiber electrode (CFE) is presented. The biosensor is constructed by immobilizing the enzyme, glutamate dehydrogenase (GLUD) on the surface of single carbon fiber modified by co-deposition of ruthenium (Ru) and rhodium (Rh) nanoparticles. SEM and EDX shed useful insights into the morphology and composition of the modified microelectrode. The mixed Ru/Rh coating offers a greatly enhanced electrocatalytic activity towards the detection of ß-nicotinamide adenine dinucleotide (NADH), with a substantial decrease in overpotential of ∼ 400 mV compared to the unmodified CFE. It also imparts higher stability with minimal surface fouling, common to NADH oxidation. Further modification with the enzyme, GLUD leads to effective amperometric biosensing of α-KG through monitoring of the NADH consumption. A very rapid response to dynamic changes in the α-KG concentrations is observed with a response time of 6s. The current response is linear between 100 and 600 µM with a sensitivity of 42 µAM(-1) and a detection limit of 20 µM. This proof of concept study indicates that the GLUD-Ru/Rh-CFE biosensor holds great promise for real-time electrochemical measurements of α-KG.

High-fidelity determination of security threats via a Boolean biocatalytic cascade.

The ability to assess diverse security threats using a biochemical logic network system is demonstrated. The new biocatalytic cascade, emulating a NOR logic gate, is able to identify the presence of explosive compounds and nerve agents by providing a simple and rapid 'YES'/'NO' alert.

Multi-enzyme logic network architectures for assessing injuries: digital processing of biomarkers.

A multi-enzyme biocatalytic cascade processing simultaneously five biomarkers characteristic of traumatic brain injury (TBI) and soft tissue injury (STI) was developed. The system operates as a digital biosensor based on concerted function of 8 Boolean AND logic gates, resulting in the decision about the physiological conditions based on the logic analysis of complex patterns of the biomarkers. The system represents the first example of a multi-step/multi-enzyme biosensor with the built-in logic for the analysis of complex combinations of biochemical inputs. The approach is based on recent advances in enzyme-based biocomputing systems and the present paper demonstrates the potential applicability of biocomputing for developing novel digital biosensor networks.

Hybrid polymer-grafted multiwalled carbon nanotubes for in vitro gene delivery.

Carbon nanotubes (CNTs) consist of carbon atoms arranged in sheets of graphene rolled up into cylindrical shapes. This class of nanomaterials has attracted attention because of their extraordinary properties, such as high electrical and thermal conductivity. In addition, development in CNT functionalization chemistry has led to an enhanced dispersibility in aqueous physiological media which indeed broadens the spectrum for their potential biological applications including gene delivery. The aim of this study is to determine the capability of different cationic polymer-grafted multiwalled carbon nanotubes (MWNTs) (polymer-g-MWNTs) to efficiently complex and transfer plasmid DNA (pCMV-ßGal) in vitro without promoting cytotoxicity. Carboxylated MWNT is chemically conjugated to the cationic polymers polyethylenimine (PEI), polyallylamine (PAA), or a mixture of the two polymers. In order to explore the potential of these polymer-g-MWNTs as gene delivery systems, we first study their capacity to complex plasmid DNA (pDNA) using agarose gel electrophoresis. Gel migration studies confirm pDNA binding to polymer-g-MWNT with different affinities, highest for PEI-g-MWNT and PEI/PAA-g-CNT constructs. ß-galactosidase expression is assessed in human lung epithelial (A549) cells, and the cytotoxicity is determined by modified LDH assay after 24 h incubation period. Additionally, PEI-g-MWNT and/or PEI/PAA-g-MWNT reveal an improvement in gene expression when compared to the naked pDNA or to the equivalent amounts of PEI polymer alone. Mechanistically, pDNA was delivered by the polymer-g-MWNT constructs via a different pathway compared to those used by polyplexes. In conclusion, polymer-g-MWNTs may be considered in the future as a versatile tool for efficient gene transfer in cancer cells in vitro, provided their toxicological profile is established.

Enzymatic AND logic gates operated under conditions characteristic of biomedical applications.

Experimental and theoretical analyses of the lactate dehydrogenase and glutathione reductase based enzymatic AND logic gates in which the enzymes and their substrates serve as logic inputs are performed. These two systems are examples of the novel, previously unexplored class of biochemical logic gates that illustrate potential biomedical applications of biochemical logic. They are characterized by input concentrations at logic 0 and 1 states corresponding to normal and pathophysiological conditions. Our analysis shows that the logic gates under investigation have similar noise characteristics. Both significantly amplify random noise present in inputs; however, we establish that for realistic widths of the input noise distributions, it is still possible to differentiate between the logic 0 and 1 states of the output. This indicates that reliable detection of pathophysiological conditions is indeed possible with such enzyme logic systems.

Strip-based amperometric detection of myeloperoxidase.

The development of a screen-printed strip-based amperometric biosensor for the determination of myeloperoxidase (MPO) levels is reported. The biosensor utilizes 3,3',5,5'-tetramethylbenzidine (TMB) as a redox mediator to enable high-sensitivity quantification of physiological levels of MPO. A multivariate parameter optimization was performed. Under the optimal conditions, physiological levels of MPO between 3 and 18 U/L were detected in both acetate buffer (pH 4.5) and human serum using flexible screen-printed electrodes (SPE). The potential interference generated by common serum-based electroactive compounds and a similar peroxidase enzyme was also investigated. The proposed detection methodology offers a simpler, more rapid, and cost-effective alternative to conventional MPO immunoassays, thereby leading to further development in point-of-care testing of acute cardiac events.

Multiplexing of injury codes for the parallel operation of enzyme logic gates.

The development of a highly parallel enzyme logic sensing concept employing a novel encoding scheme for the determination of multiple pathophysiological conditions is reported. The new concept multiplexes a contingent of enzyme-based logic gates to yield a distinct 'injury code' corresponding to a unique pathophysiological state as prescribed by a truth table. The new concept is illustrated using an array of NAND and AND gates to assess the biomedical significance of numerous biomarker inputs including creatine kinase, lactate dehydrogenase, norepinephrine, glutamate, alanine transaminase, lactate, glucose, glutathione disulfide, and glutathione reductase to assess soft-tissue injury, traumatic brain injury, liver injury, abdominal trauma, hemorrhagic shock, and oxidative stress. Under the optimal conditions, physiological and pathological levels of these biomarkers were detected through either optical or electrochemical techniques by monitoring the level of the outputs generated by each of the six logic gates. By establishing a pathologically meaningful threshold for each logic gate, the absorbance and amperometric assays tendered the diagnosis in a digitally encoded 6-bit word, defined as an 'injury code'. This binary 'injury code' enabled the effective discrimination of 64 unique pathological conditions to offer a comprehensive high-fidelity diagnosis of multiple injury conditions. Such processing of relevant biomarker inputs and the subsequent multiplexing of the logic gate outputs to yield a comprehensive 'injury code' offer significant potential for the rapid and reliable assessment of varied and complex forms of injury in circumstances where access to a clinical laboratory is not viable. While the new concept of parallel and multiplexed enzyme logic gates is illustrated here in connection to multi-injury diagnosis, it could be readily extended to a wide range of practical medical, industrial, security and environmental applications.

Enzyme logic gates for the digital analysis of physiological level upon injury.

A biocomputing system composed of a combination of AND/IDENTITY logic gates based on the concerted operation of three enzymes: lactate oxidase, horseradish peroxidase and glucose dehydrogenase was designed to process biochemical information related to pathophysiological conditions originating from various injuries. Three biochemical markers: lactate, norepinephrine and glucose were applied as input signals to activate the enzyme logic system. Physiologically normal concentrations of the markers were selected as logic 0 values of the input signals, while their abnormally increased concentrations, indicative of various injury conditions were defined as logic 1 input. Biochemical processing of different patterns of the biomarkers resulted in the formation of norepiquinone and NADH defined as the output signals. Optical and electrochemical means were used to follow the formation of the output signals for eight different combinations of three input signals. The enzymatically processed biochemical information presented in the form of a logic truth table allowed distinguishing the difference between normal physiological conditions, pathophysiological conditions corresponding to traumatic brain injury and hemorrhagic shock, and abnormal situations (not corresponding to injury). The developed system represents a biocomputing logic system applied for the analysis of biomedical conditions related to various injuries. We anticipate that such biochemical logic gates will facilitate decision-making in connection to an integrated therapeutic feedback-loop system and hence will revolutionize the monitoring and treatment of injured civilians and soldiers.

Electrochemical detection of celecoxib at a polyaniline grafted multiwall carbon nanotubes modified electrode.

A modified electrode is fabricated by grafting polyaniline (PANI) chains onto multiwall carbon nanotubes (MWNTs) and utilized for the adsorptive reduction of celecoxib (CEL). PANI-g-MWNTs modified electrode appreciably enhances the sensitive detection of CEL in extremely lower concentrations (1x10(-11)M). Square wave stripping voltammogram (SWSV) shows a reduction peak at -1.08V with a high peak current for SW frequency of 100Hz, amplitude of 25mV and step height of 6mV. The high surface area of PANI-g-MWNTs is effectively utilized for the adsorption of CEL to preconcentrate at the electrode. The PANI chains covalently linked to MWNTs mediate the electron transfer processes. The present finding open-up the scope for extending on the use of other conducting polymers grafted MWNTs modified electrodes for the detection of compounds that do not have surface-active properties at conventional electrodes.

Enhanced electrochemical detection of ketorolac tromethamine at polypyrrole modified glassy carbon electrode.

A glassy carbon electrode modified with a coating of polypyrrole (Ppy) exhibited an attractive performance for the detection and determination of a non-steroidal and non-narcotic analgesic compound, ketorolac tromethamine (KT). Cyclic voltammetry, differential pulse and square wave voltammetry were used in a combined way to identify the electrochemical characteristics and to optimize the conditions for detection. For calibrating and estimating KT, square-wave voltammetry was mainly used. The drug shows a well-defined peak at -1.40 V vs. Ag/AgCl in the acetate buffer (pH 5.5). The existence of Ppy on the surface of the electrode gives higher electrochemical active sites at the electrode for the detection of KT and preconcentrate KT by adsorption. The square-wave stripping voltammetric response depends on the excitation signal and the accumulation time. The calibration curve is linear in the range 1 x 10(-11) to 1 x 10(-7) M with a detection limit of 1.0 x 10(-12) M. Applicability to serum samples was also demonstrated. A detection limit of 1.0 ng ml for serum was observed. Square-wave voltammetry shows superior performance over UV spectroscopy and other techniques.

Electrochemical determination of dopamine and ascorbic acid at a novel gold nanoparticles distributed poly(4-aminothiophenol) modified electrode.

A modified electrode is fabricated by embedding gold nanoparticles into a layer of electroactive polymer, poly(4-aminothiophenol) (PAT) on the surface of glassy carbon (GC) electrode. Cyclic voltammetry (CV) is performed to deposit PAT and concomitantly deposit Au nanoparticles. Field emission transmission electron microscopic image of the modified electrode, PAT-Au(nano)-ME, indicates the presence of uniformly distributed Au nanoparticles having the sizes of 8-10nm. Electrochemical behavior of the PAT-Au(nano)-ME towards detection of ascorbic acid (AA) and dopamine (DA) is studied using CV. Electrocatalytic determination of DA in the presence of fixed concentration of AA and vice versa, are studied using differential pulse voltammetry (DPV). PAT-Au(nano)-ME exhibits two well defined anodic peaks at the potential of 75 and 400mV for the oxidation of AA and DA, respectively with a potential difference of 325mV. Further, the simultaneous determination of AA and DA is studied by varying the concentration of AA and DA. PAT-Au(nano)-ME exhibits selectivity and sensitivity for the simultaneous determination of AA and DA without fouling by the oxidation products of AA or DA. PAT and Au nanoparticles provide synergic influence on the accurate electrochemical determination of AA or DA from a mixture having any one of the component (AA or DA) in excess. The practical analytical utilities of the PAT-Au(nano)-ME are demonstrated by the determination of DA and AA in dopamine hydrochloride injection and human blood serum samples.

Fabrication of a gold nanoparticles decorated carbon nanotubes based novel modified electrode for the electrochemical detection of glucose.

A modified electrode based on gold nanoparticles decorated multiwall carbon nanotubes (MWNTs), MWNT-Au(nano)-ME is fabricated. MWNTs are functionalized with 4-aminothiophenol and coated over the glassy carbon electrode. Further, Au nanoparticles are deposited into MWNTs coated GC electrode by electrochemical reduction of HAuCl4. Field emission transmission electron microscope (FETEM) image shows the formation of approximately 5 nm sized Au nanoparticles without any agglomeration on the MWNTs surface. Further, the presence of Au nanoparticles is confirmed through X-ray photoelectron spectroscopic (XPS) studies. The electrocatalytic activity of the MWNT-Au(nano)-ME towards the detection of glucose is investigated. MWNT-Au(nano)-ME shows enhanced current response than pristine MWNT-ME over the entire (+0.05 to +0.80 V) potential range. The modified electrode shows linear response to current with the concentration of glucose between 1 and 20 mM. Larger current responses to glucose oxidation are witnessed at +0.60 V than at +0.05 V. However, a large interference signal, reflecting the accelerated oxidation of electroactive interference is observed at +0.60 V. No overlapping signal from the interferents such as ascorbic acid, acetaminophen, and dopamine are observed at the MWNT-Au(nano)-ME at +0.05 V. Further, the MWNT-Au(nano)-ME shows high resistance to the toxictiy of chloride ions.

Synthesis and characterization of processable multi-walled carbon nanotubes-sulfonated polydiphenylamine graft copolymers.

Water soluble and processable nanocomposites composed of multi-walled carbon nanotubes (MWNTs) and poly(diphenylamine sulfonic acid) (PDPASA) are synthesized and characterized. Two types of methodologies are adopted. MWNTs are covalently functionalized with 2,5-diaminobenzene sulfonic acid (DABSA) and further in situ polymerized with diphenylamine-4-sulfonic acid (DPASA). This results in the formation of nanocomposites, MWNT(DABSA)-g-PDPASA, in which PDPASA is presented as the graft chains onto MWNTs. In another approach, DPASA is in situ polymerized in presence of unfunctionalized MWNTs, results in a nanocomposite in which MWNTs are present as entrapped mass in PDPASA matrix. Both nanocomposites are found to be water soluble and can form free standing films. The conductivity of MWNT(DABSA)-g-PDPASA and MWNT/PDPASA is found to be 1.25 mS x cm(-1) and 0.65 mS x cm(-1), respectively, which is higher than that of pristine PDPASA (0.25 x 10(-5) S x cm(-1)). The nanocomposites are characterized for their structure, morphology, optical and thermal properties.

Fabrication and electrocatalysis of self-assembly directed gold nanoparticles anchored carbon nanotubes modified electrode.

A self-assembly directed approach was adopted to modify glassy carbon electrode (GC) with gold nanoparticles incorporation and the electrocatalytic performance of self-assembly modified electrode, GC/SA-Au-ME was critically evaluated for the oxidation of ascorbic acid (AA). The modification involves the dispersion of multi-wall carbon nanotube (MWNT) and an inclusion complex, beta-cyclodextrin-4-aminothiophenol on the surface of GC electrode in the presence of cetyltrimethylammonium bromide (CTAB). Gold nanoparticles were deposited into the self-assembled sites to fabricate the modified electrode, GC/SA-Au-ME. Another electrode (GC-Au-ME) was fabricated under similar conditions in the absence of CTAB. The electrocatalytic activity of the modified electrodes (GC/SA-Au-ME and GC-Au-ME) towards the oxidation of AA was critically compared. Cyclic voltammetry, chronoamperometry, and double potential chronoamperometry were used to evaluate the characteristics of the modified electrodes. The self-assembled electrode (GC/SA-Au-ME) shows excellent electrocatalytic activity over the other electrode, GC-Au-ME. Augmented current response, faster electron transfer kinetics (with a rate constant for electron transfer process as 3.25 x 10(4) cm3 mol(-1) s(-1)), linear range of response for the analyte (1-50 mM with an extended detection limit to 1 microM), better sensitivity, and selectivity were witnessed for the self-assembly directed modified electrode.