Development, characterization, and evaluation of the antioxidant activity of nanocarriers based on surfactant swollen micelles that encapsulate essential oils.

This work aimed to compare the performance of two relatively underexplored methods for the swollen micelles (SMs) production as nanocarriers for essential oils (EOs). Origanum vulgare and Thymus vulgaris EOs were examined. The first method (SMs-1), involved a self-assembly process, while the second one (SMs-2), employed titration operation of an emulsion into a surfactant solution for SMs formation. Tween 80 and ethanol were used as surfactant and co-surfactant, respectively. The solubilization kinetics and the saturation concentration of EOs were determined. Particle size (measured by DLS) and encapsulation efficiency (EE) were the control parameters assessed, along with the EOs-loaded SMs' stability during 30 days of storage. Additionally, the EOs-loaded SMs' morphology was analyzed using atomic force microscopy (AFM). Finally, the antioxidant activity through the ABTS+ radical scavenging and the reducing power of EOs encapsulated in SMs was determined. The results showed that the solubilization of EOs in SMs was a rapid process with high EE. EOs-loaded SMs-2 systems exhibited greater colloidal stability and higher EE compared to EOs-loaded SMs-1 systems, showing smaller and more homogeneous particle sizes. Moreover, EOs-loaded SMs-2 systems maintained constant EE throughout the storage period. AFM imaging confirmed the rounded and heterogeneous morphology of EOs-loaded SMs-1 and the smaller, more homogeneous, and spherical morphology of EOs-loaded SMs-2. EOs-loaded SMs-2 showed high ABTS+ radical scavenging and reducing power when encapsulated in SMs. In conclusion, the SMs-2 method emerged as an effective approach for producing efficient nanocarriers for EOs, signifying a promising path for future developments in antioxidant delivery systems.

Squalene encapsulation by emulsification and freeze-drying process: Effects on bread fortification.

In the present work, squalene (SQ) was encapsulated by a conventional emulsion method using egg white protein nanoparticles (EWPn) as a high molecular weight surfactant, followed by a freeze-drying process to obtain an SQ powder ingredient. EWPn was produced by heat treatment at 85°C, 10 min, and pH 10.5. EWPn showed higher emulsifying activity regarding native egg white protein (EWP), highlighting their potential to be used for the SQ encapsulation by an emulsification process. First, we explored the encapsulation conditions using pure corn oil as an SQ carrier. Conditions were oil fraction (0.1-0.2), protein amount (2-5 wt.%), homogenization pressure (100 and 200 bar), and maltodextrin amount (10-20 wt.%). At 0.15 oil fraction, 5 wt.%. protein concentration, 200 bar homogenization pressure, and 20% maltodextrin, the highest encapsulation efficiency (EE) was reached. Then, according to these conditions, SQ was encapsulated to obtain a freeze-dried powder ingredient for bread formulation. The total and free oil of SQ freeze-dried powder were 24.4% ± 0.6% and 2.6% ± 0.1%, respectively, resulting in an EE value of 89.5% ± 0.5%. The physical, textural, and sensory properties of functional bread were not affected by the addition of 5.0% SQ freeze-dried powder. Finally, the bread loaves showed higher SQ stability than the one formulated with unencapsulated SQ. Hence, the encapsulation system developed was suitable for obtaining functional bread based on SQ fortification.

Bioactive compounds: Application of albumin nanocarriers as delivery systems.

Enriched products with bioactive compounds (BCs) show the capacity to produce a wide range of possible health effects. Most BCs are essentially hydrophobic and sensitive to environmental factors; so, encapsulation becomes a strategy to solve these problems. Many globular proteins have the intrinsic ability to bind, protect, encapsulate, and introduce BCs into nutraceutical or pharmaceutical matrices. Among them, albumins as human serum albumin (HSA), bovine serum albumin (BSA), ovalbumin (OVA) and α-lactalbumin (ALA) are widely abundant, available, and applied in many industrial sectors, becoming promissory materials to encapsulate BCs. Therefore, this review focuses on researches about the main groups of natural origin BCs (namely phenolic compounds, lipids, vitamins, and carotenoids), the different types of nanostructures based on albumins to encapsulate them and the main fields of application for BCs-loaded albumin systems. In this context, phenolic compounds (catechins, quercetin, and chrysin) are the most extensively BCs studied and encapsulated in albumin-based nanocarriers. Other extensively studied subgroups are stilbenes and curcuminoids. Regarding lipids and vitamins; terpenes, carotenoids (ß-carotene), and xanthophylls (astaxanthin) are the most considered. The main application areas of BCs are related to their antitumor, anti-inflammatory, and antioxidant properties. Finally, BSA is the most used albumin to produced BCs-loaded nanocarriers.

PEGylation of genistein-loaded bovine serum albumin nanoparticles and its effect on in vitro cell viability and genotoxicity properties.

Self-assembled bovine serum albumin nanoparticles loaded with the isoflavone genistein have shown apoptosis-mediated cytotoxicity against murine mammary adenocarcinoma F3II cells. Due to their protein nature and small particle size (13-15 nm), their parenteral administration could be affected by possible immunogenic reactions and rapid clearance from the bloodstream. To avoid these problems, PEGylation of the systems was achieved in this work by using a 30 kDa methoxy-polyethylene glycol carbonyl imidazole derivative through the reaction between the carbonyl imidazole group and the amino groups of Lys residues on the protein surface, which was confirmed by a 17% reduction in the available amino groups content measured by the o-phthaldialdehyde method. PEGylated isoforms were obtained, showing an increase of particle size from 13 to 15 nm to around 260 nm, and were purified by SEC-FPLC and characterized by SDS-PAGE, DLS and AFM techniques. The effect of PEGylation on BSAnp-Gen cytotoxicity and genotoxicity against F3II cells was evaluated in vitro by MTT assay, flow cytometry analysis and micronucleus assay. From the results, PEGylation produced an improvement of the biological properties of genistein-loaded nanoparticles in terms of cytotoxicity (lower IC50), not affecting the induction of apoptosis, decreasing the genotoxicity of the systems (less induction of micronucleus formation).

Nanocomplexes based on egg white protein nanoparticles and bioactive compounds as antifungal edible coatings to extend bread shelf life.

This work is aimed to obtain nanocomplexes based on egg white protein nanoparticles (EWPn) and bioactive compounds (BC), carvacrol (CAR), thymol (THY) and trans-cinnamaldehyde (CIN), and evaluate their application as antifungal edible coatings on preservative-free breads. The nanocomplex formation was studied through stoichiometry, affinity, colloidal behavior, morphology, and encapsulation efficiency (EE, %). Rounded-shape nanocomplexes with particle sizes < 100 nm were obtained. The EE values were similar for all BC (>83%). Furthermore, the in vitro antifungal activity of the nanocomplexes was verified using the Aspergillus niger species. The nanocomplexes were applied as coatings onto the crust of preservative-free breads, which were stored for 7 days (at 25 °C). The coatings had no impact on the physicochemical properties of the bread loaves (moisture, aw, texture, and color). Finally, the coatings based on EWPn-THY and EWPn-CAR nanocomplexes showed higher antifungal efficacy, extending the bread shelf life after 7 days.

Genistein loaded in self-assembled bovine serum albumin nanovehicles and their effects on mouse mammary adenocarcinoma cells.

Antitumor activity of plant-derived flavonoids has been researched during recent decades. Among them, genistein (Gen) stands out for showing cytotoxic activity against breast cancer cells. However, its low water solubility, limited bioavailability, and fast metabolism hinder its administration in chemopreventive therapies. To overcome these obstacles, bovine serum albumin nanovehicles (BSAnp) were obtained by a heat-induced self-assembly process at 70 °C and two aqueous medium pH (9.0 and 11.0) and assayed for the Gen loading. Thus, in this work, Gen loading in BSAnp was studied by spectroscopic techniques and compared with the one obtained for its stereoisomer, chrysin (Chrys). Results revealed that Gen binds to BSAnp via fluorescence quenching mechanism forming inclusion complexes. Compared to Chrys, Gen binding to BSAnp involved more molecules, whereas the association constant was similar for both flavonoids. In general, flavonoid loading in protein systems was strongly affected by the combined effects of BSA conformational state (native vs. aggregated), nanovehicle size, and flavonoid chemical structure. To evaluate the antitumor properties freeze-dried powders were obtained, and they were assayed in vitro after reconstitution by XTT technique and Annexin V-FITC flow cytometry against mouse mammary adenocarcinoma F3II cells. Gen-loaded BSAnp produced a significant decrease in cell viability compared with unloaded BSAnp systems, being the highest cytotoxic effects found for the lowest sized Gen-loaded BSAnp. The leading cytotoxicity mechanism for Gen-loaded systems was apoptosis. Summarizing, it can be concluded that BSAnp constitute versatile nanovehicles for potential flavonoid incorporation in pharmaceutical and nutraceutical matrices.

In vitro gastrointestinal digestion and cytotoxic effect of ovalbumin-conjugated linoleic acid nanocomplexes.

The aim of this work was to examine the behavior of conjugated linoleic acid (CLA) delivery systems based on ovalbumin (OVA) and their derived nanoparticles (OVAn1 and OVAn2), under static in vitro gastrointestinal digestion model. In addition, potential cytotoxic effect of these inclusion complexes on a human colon cancer cell line (HT-29) was evaluated. OVA was resistant to gastric and intestinal digestion, while OVA nanoparticles were very susceptible to digestive enzymes hydrolysis. Particle size distribution (PDS) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) for OVA evidenced the presence of a protein fragment of similar size after simulated digestive process. Conversely, for nanoparticles, partial and total hydrolysis in gastric and intestinal phases, respectively, was evidenced. After in vitro gastrointestinal digestion, released CLA (RCLA) was assayed. In case of OVA, as CLA carrier, RCLA was 37%, while for OVA nanoparticles, lower RCLA values (~10-20%) were obtained. From cytotoxic assays, it was observed that CLA molecule was responsible for cell death, whereas OVA or their derived nanoparticles were not cytotoxic on HT-29 cells. On the other hand, flow cytometry analysis revealed that main death mechanism for CLA, and their inclusion complexes was apoptosis. OVA-CLA and OVAn1-CLA inclusion complexes displayed the highest potential cytotoxic activity and apoptotic index. Information derived from this work could be relevant for the design of CLA delivery systems as promising nanosupplements for production of new functional and excipient foods for both prevention and control of colon cancer.

Physiological and morphological responses of green microalgae Chlorella vulgaris to silver nanoparticles.

The toxic effects of silver nanoparticles (AgNPs) on the physiology and morphology of the green microalga Chlorella vulgaris were studied. AgNPs were characterized by particle size distribution, ζ potential measurement, and atomic force microscopy (AFM). Chlorella vulgaris was exposed to 90-1440 µg/L of AgNPs range in Bold's Basal Medium for 96 h. The inhibition of algae growth rate and changes in the concentrations of chlorophyll-a, chlorophyll-b, pheophytin, and carotenoids was determined at the beginning and end of the trial. Cell diameter and volume, carbohydrate, total lipids, and protein content were also determined. Our data strongly suggest that the toxic effects of the AgNPs resulted in concentration and time-dependent. AgNPs altered C. vulgaris growth kinetics and cell metabolism expressed in photosynthetic pigments and biochemical composition. Our study confirmed the cytotoxicity of AgNPs through the algal growth inhibition with an EC50 value of 110 µg/L. Also, changes of chlorophyll-a, chlorophyll-b, pheophytin, and carotenoids concentrations were observed associated with a color shift from green to pale brown of algae cultures exposed to AgNPs for 96 h. Furthermore, algae cell concentration, diameter, and volume, plus total lipid, protein, and carbohydrates contents in the presence of AgNPs, were significantly altered compared to untreated cells. In synthesis, this study highlighted AgNPs toxic effects on morphological and physiological traits of C. vulgaris and warns about possible impacts on energy flow and aquatic food web structure, and on the transfer efficiency of energy to higher trophic levels.

Chrysin-loaded bovine serum albumin particles as bioactive nanosupplements.

Development of nanosupplements based on bioactive compound encapsulation and their incorporation into diet constitutes a field that is growing exponentially. Among flavonoids, chrysin (Chrys) shows high antitumor activity but its poor water solubility limits its applications. Bovine serum albumin nanoparticles (BSAnp) with sizes in the range of 13-28 nm were previously prepared by applying a heat-induced self-assembly method, and they were able to load Chrys. Hence, the aim of this study is to provide information about elaboration of Chrys nanosupplements considering the incidence of the freeze-drying process of Chrys-loaded and unloaded BSAnp systems on aqueous redispersibility and on the retention of their physicochemical properties as examined by DSC, turbidity and DLS measurements. In general, the physicochemical properties of Chrys-loaded BSAnp were retained after the freeze-drying process. The cytotoxic activity of the reconstituted powders was assayed on MCF-7 and MDA-MB-231 cell lines (as models of cancer cell lines) by using the MTT assay. Furthermore, the mechanism of cell death was researched by Annexin V-FITC flow cytometry. The apoptosis-mediated cytotoxicity was higher for Chrys-loaded BSAnp than for the BSAnp system. The greatest in vitro cytotoxic effect was observed for the smallest sized Chrys-loaded BSAnp, which was obtained at pH 11.0 and 70 °C. Finally, this system was subjected to static in vitro gastrointestinal digestion using the standardized protocol, and ∼14% Chrys was released from BSAnp after digestion. These results would provide a procedure to obtain bioactive nanosupplements in a soluble form, and they would suggest that smaller sized Chrys-loaded BSAnp could be a promising oral delivery system for potential cancer therapies.

Design of a biodegradable carrier for the application of controller bacteria on air-water interfaces.

BACKGROUND: The formulation of a biodegradable carrier which effectively concentrates microorganisms on air-water interfaces is proposed. This avoids the dispersion of bacteria into the bulk liquid phase and at the same time prevents their sedimentation. This formulation can be used in biocontrol and bioremediation treatments where the target is at the position of the air-water interface, as in the case of the treatment of rice diseases caused by Sclerotium oryzae and Rhizoctonia complex. The carrier is an oil-in-water (O/W) emulsion which contains lecithin and chitosan in both phases at different proportions. In a stable formulation, bacteria that are adsorbed onto the surface of oil droplets are carried with them and flowed upward to the air-water interface, due to buoyancy forces. RESULTS: When using the biodegradable carrier, it is possible to recover at least 15-fold more bacteria from the air-water interface than in the case of using the aqueous formulation. CONCLUSION: The emulsion O/W is applied to the surface by dripping, resulting in a homogeneous two-dimensional film distribution. With this application device, the number of bacteria at the air-water interface is significantly increased. © 2019 Society of Chemical Industry.

Simulated gastrointestinal digestion of inclusion complexes based on ovalbumin nanoparticles and conjugated linoleic acid.

The objective of this work was to obtain and characterize conjugated linoleic acid (CLA) delivery systems based on ovalbumin nanoparticles (OVAn1 and OVAn2) and to study their behaviour under a standardised static in vitro digestion model. OVAn1 and OVAn2 were obtained by heat treatment (85 °C, 5 min, pH 11.35 and 7.5, respectively). OVAn1 and OVAn2 had hydrodynamic diameters of 24.63 ± 0.04 and 92.0 ± 0.2 nm, respectively, showing no significant differences in ζ potential values (p < 0.05) at pH 7.0. CLA nanocomplexes were examined in terms of size and ζ potential at pH 3.0 and 7.0, highlighting that binding of CLA caused an increase in size for OVA and both OVA nanoparticles. Morphological characterization was performed by confocal laser scanning microscopy (CSLM) finding that OVA and OVA nanoparticles had a circular shape. Also, the CLA encapsulation efficiency (EE) for OVA and OVA nanoparticles was studied, yielding EE values greater than 97% for all systems. Finally, systems were assayed for a standardized in vitro gastrointestinal digestion model considering gastric and intestinal steps. Macroscopic appearance, CSLM images and quantification of CLA retention by HPLC were evaluated after digestion. All the systems showed the formation of macroscopic aggregates both in gastric and intestinal phases, which generated a visible precipitate. In all systems, CSLM confirmed the presence of numerous undefined-form aggregates. Finally, high CLA retention (around 99%) was found for native protein and nanoparticles.

Spray dried flaxseed oil powdered microcapsules obtained using milk whey proteins-alginate double layer emulsions.

Spray-dried flaxseed oil microcapsules were produced by designing O/W double-layer emulsions using a whey protein concentrate (WPC) and sodium alginate (SA). The influence of homogenization pressure (5-15 MPa), pH (4-7) and maltodextrin concentration (0.8-7 wt%) on stability of primary and secondary emulsions was investigated, through droplet size and zeta potential measurements. Powders obtained after spray drying were characterized through scanning electron microscopy, encapsulation efficiency and water activity determinations. Flaxseed oil oxidative stability was assessed by measuring peroxide values (PV) and thiobarbituric reactive substances (TBARS) at different microencapsulation processing steps and during powders storage. Droplet sizes of primary emulsions were reduced when increasing homogenization pressures (up to 10 MPa). Zeta potential measurements evidenced double WPC-SA layer formation around oil droplets at pH 5. Encapsulation efficiencies up to 84% were obtained in powdered microcapsules with the highest MD content. Microencapsulation process produced a gradual increment on PV, whereas TBARs slightly increased. Nevertheless, these values were maintained relatively constant after powders storage at -18 and 4 °C for 6 months, and at 20 °C up to 6 weeks and PV did not exceed the maximum allowed for cold pressed oils.

Impact of gum arabic and sodium alginate and their interactions with whey protein aggregates on bio-based films characteristics.

Two polysaccharides (PS), gum arabic (GA) and sodium alginate (SA), and whey protein concentrate (WPC) were used to design bio-based films at two ratios (RPS:WPC, 1:2 and 1:3). The effects of PS, RPS:WPC and WPC thermal treatment (unheated vs. aggregate) were determined on films characteristics. Film-forming dispersions were tested using different complementary techniques: UV-Vis spectroscopy, electrophoretic mobility, bulk rheology and confocal microscopy. PS exhibited weak associations with proteins. However, this behavior was more significative in SA/WPC systems. Rheological and optical characteristics of filmogenic suspensions were influenced by PS, RPS:WPC and WPC heat treatment. Apparent viscosity values for SA/WPC systems were 80-250 times higher than the ones obtained for GA/WPC systems. Furthermore, thickness, moisture absorption, contact angle and mechanical properties were also affected by the film design factors. GA/WPC-aggregates films showed lesser moisture absorption; however, they have higher surface polarity than those made with SA/WPC-aggregates. Moreover, SA/WPC-aggregates systems provided stronger films in comparison with the GA/WPC-aggregates ones. In addition, mechanical properties were also affected by RPS:WPC and WPC treatment. It was observed that denatured WPC and 1:3 RPS:WPC produced weaker mechanical features. Results provide useful information for the design of bio-based mixed films with tailor-made properties.

Formation and characterization of self-assembled bovine serum albumin nanoparticles as chrysin delivery systems.

Chrysin (5,7-dihydroxyflavone) (Chrys) is a natural flavone extracted from many plants, and it has been proposed as a bioactive agent for cancer therapy. Nevertheless, its use is limited mainly due to its poor water solubility. Bovine serum albumin (BSA) is a water soluble, biocompatible and non-toxic protein with a promising application in lipophilic bioactive compound delivery. Moreover, BSA is heat sensitive, feature that could be used for producing self-assembled nanoparticle with tailor-made properties. In this contribution, we studied the formation of BSA nanoparticles (BSAnp) by thermal treatment at different conditions of temperature (70 °C/5 min and 85 °C/5 min), protein concentration (1.0-4.0%wt.) and aqueous medium pH values (9.0 and 11.0) in which it is known that BSA is found in different unfolded conformations. Binding of Chrys dissolved in dimethyl sulfoxide (DMSO) was studied by fluorescence titration experiments. Characterization of Chrys-loaded and unloaded BSAnp was performed in phosphate buffered saline (PBS) pH 7.4 by applying a set of complementary techniques: dynamic light scattering (DLS), size exclusion fast protein liquid chromatography (SEC-FPLC) and transmission electron microscopy (TEM). Different populations of BSAnp were obtained, which showed different diameters in the range of 1328 nm, ζ potentials around -10.0 mV, molecular weight in the range of 400-1000 kDa and spherical shape. Chrys encapsulation efficiency (EE. %) was also determined, and values between 44-84% were obtained, which mainly depended on the mode of Chrys binding and physicochemical BSAnp properties. Results highlight the ability of self-assembled BSAnp for Chrys vehiculization in an aqueous medium which could found potential application in antitumor therapies.

Preparation of TPP-crosslinked chitosan microparticles by spray drying for the controlled delivery of progesterone intended for estrus synchronization in cattle.

PURPOSE: Planned reproduction in cattle involves regulation of estrous cycle and the use of artificial insemination. Cycle control includes the administration of exogenous progesterone during 5-8 days in a controlled manner allowing females to synchronize their ovulation. Several progesterone delivery systems are commercially available but they have several drawbacks. The aim of the present contribution was to evaluate chitosan microparticles entrapping progesterone as an alternative system. METHODS: Microparticles were prepared by spray drying. The effect of formulation parameters and experimental conditions on particle features and delivery was studied. A mathematical model to predict progesterone plasma concentration in animals was developed and validated with experimental data. RESULTS: Microparticle size was not affected by formulation parameters but sphericity enhances as Tween 80 content increases and it impairs as TPP content rises. Z potential decreases as phosphate content rises. Particles remain stable in acidic solution but the addition of surfactant is required to stabilize dispersions in neutral medium. Encapsulation efficiencies was 69-75%. In vitro delivery studies showed burst and diffusion-controlled phases, being progesterone released faster at low pH. In addition, delivery extend in cows was affected mainly by particle size and hormone initial content, while the amount injected altered plasma concentration. Theoretical predictions with excellent accuracy were obtained. CONCLUSION: The mathematical model developed can help to find proper particle features to reach specific delivery rates in the animals. This not only save time, money and effort but also minimized experimentation with animals which is desired from an ethical point of view.

Análisis de las motivaciones del voluntario en Oaxaca / Analysis of the motivation of a volunteer in Oaxaca

Este artículo presenta un análisis de las motivaciones que llevan a las personas a hacerse voluntarias en Oaxaca, utilizando la adaptación del Inventario de Funciones del Voluntariado (IFV) de Dávila y Chacón (2005). Se aplicó el instrumento a una muestra de 143 voluntarios, 12 pertenecientes a CANICA, Centro de Apoyo al Niño de la Calle de Oaxaca, Asociación Civil, y 131 a Cruz Roja Mexicana, Institución de Asistencia Priva- da, delegación local Oaxaca, encontrando que el motivador más importante es la mejora del currículo, lo cual está relacionado con las características de la población encuestada y las organizaciones a las cuales están vinculados. Se confirma que existe multiplicidad en las motivaciones que determinan la participación voluntaria y que prestar un servicio voluntario brinda una oportunidad de intercambio entre el voluntario y la organización.

This article presents an analysis of the motivations that lead people to become volunteers in Oaxaca, using Volunteer Functions Inventory (VFI) adapted from Dávila and Chacón (2005). The instrument was applied to a sample of 143 volunteers, 12 belonged to CANICA, Support Center Street Child Oaxaca, Civil Association, and 131 Mexican Red Cross, Private Assistance Institution, local delegation Oaxaca, finding that the most important motivator is improved curriculum, which is related to the characteristics of the survey population and the organizations to which they are linked. It is confirmed that multiplicity exists in the motivations that determine the voluntary participation and voluntary service providing an opportunity for exchange between the volunteer and the organization.

Complexes between ovalbumin nanoparticles and linoleic acid: Stoichiometric, kinetic and thermodynamic aspects.

Stoichiometric, kinetic and thermodynamic aspects of complex formation between heat-induced aggregates of ovalbumin (ovalbumin nanoparticles, OVAn) and linoleic acid (LA) were evaluated. Extrinsic fluorescence data were fitted to modified Scatchard model yielding the following results: n: 49±2 LA molecules bound per OVA monomer unit and Ka: 9.80±2.53×10(5)M. Kinetic and thermodynamic properties were analyzed by turbidity measurements at different LA/OVA monomer molar ratios (21.5-172) and temperatures (20-40°C). An adsorption approach was used and a pseudo-second-order kinetics was found for LA-OVAn complex formation. This adsorption process took place within 1h. Thermodynamic parameters indicated that LA adsorption on OVAn was a spontaneous, endothermic and entropically-driven process, highlighting the hydrophobic nature of the LA and OVAn interaction. Finally, Atomic Force Microscopy imaging revealed that both OVAn and LA-OVAn complexes have a roughly rounded form with size lower than 100nm.

Chromatographic fractionation and molecular mass characterization of Cercidium praecox (Brea) gum.

BACKGROUND: Brea gum (BG) is an exudate from the Cercidium praecox tree that grows in semi-arid regions of Argentina. Some previous studies on BG have shown physicochemical characteristics and functional features similar to those of gum arabic. However, there is a need to elucidate the molecular structure of BG to understand the functionality. In this sense, BG was fractionated using hydrophobic interaction chromatography and the obtained fractions were analyzed by size exclusion chromatography. RESULTS: Analysis of the fractions showed that the bulk of the gum (approx. 84% of the polysaccharides) was a polysaccharide of 2.79 × 10(3) kDa. The second major fraction (approx. 16% of the polysaccharides) was a polysaccharide-protein complex with a molecular mass of 1.92 × 10(5) kDa. A third fraction consisted of protein species with a wide range of molecular weights. The molecular weight distribution of the protein fraction was analyzed by size exclusion chromatography. Comparison of the elution profiles of the exudates in native and reducing conditions revealed that some of the proteins were forming aggregates through disulfide bridges in native conditions. Further analysis of the protein fraction by SDS-PAGE showed proteins with molecular weight ranging from 6.5 to 66 kDa. CONCLUSIONS: The findings showed that BG consists of several fractions with heterogeneous chemical composition and polydisperse molecular weight distributions. © 2016 Society of Chemical Industry.

Biopolymer nanoparticles designed for polyunsaturated fatty acid vehiculization: Protein-polysaccharide ratio study.

Information about the design of biopolymer nanoparticles (BNPs) for polyunsaturated fatty acid (PUFA) vehiculization is provided. Linoleic acid (LA) was used as a model PUFA. The binding ability of LA to ß-lactoglobulin (BLG) was applied for obtaining BLG-LA complexes. BLG-LA complex formation was monitored by fluorimetry and it was observed that a moderate heat treatment (60 °C, 10 min) enhanced BLG-LA complexation. Obtaining BNPs involved the electrostatic deposition of high methoxyl pectin (HMP) onto the BLG-LA complex surface. The phase behavior of biopolymer systems was discussed at different Prot:HMP ratio (RProt:HMP, wt.%) levels (1:1-6:1). Absorbance at 600 nm, particle size, and ζ potential were analyzed at pH 4.0. At 1:1-2:1 RProt:HMP, BNPs showed appreciable turbidity, a nanometric diameter (337-364 nm), and a negative ζ potential. Finally, intrinsic and extrinsic fluorimetry was used for examining the HMP protective role at the LA binding site. At 2:1 RProt:HMP, HMP cover could promote significant LA protection in BNPs.

Linoleic acid binding properties of ovalbumin nanoparticles.

In the present work, ovalbumin (OVA) solutions (10 g/L, 50 mM NaCl, pH 7.5) were heat-treated at 75, 80 and 85°C (namely, OVA-75, OVA-80 and OVA-85, respectively), from 0 to 25 min. OVA nanoparticles (OVAn) around 100 nm were obtained. For 3 min of heat treatment, OVAn sizes increased with temperature, but for a heating time longer than 10 min, OVA-75 showed the highest size values. OVAn surface hydrophobicity increased 6-8 folds in comparison with native OVA and wavelength blue shifts of 25-30 nm in maximum fluorescence intensity were registered. These results suggest that buried hydrophobic residues were exposed to the aqueous medium. Binding experiments with linoleic acid (LA) as polyunsaturated fatty acid (PUFA) model were carried out. Firstly, binding ability of OVAn was determined from LA titration curves of intrinsic fluorescence measurements. OVA-85 at 5 min presented the highest binding ability and it was used for further binding properties studies (turbidity, particle size distribution--PSD--analysis and ζ-potential measurements). Turbidity measurement and PSD analysis showed that OVAn-LA nanocomplexes were formed, avoiding LA supramolecular self-assembly formation. The union of LA to OVAn surface confers them significant lower ζ-potential and larger size. Hence, fluorescence and ζ-potential results showed that LA would bind to OVAn by mean of hydrophobic interactions. Information derived from this work could be important to potentially use OVAn as PUFA vehiculization with applications in several industrial sectors (food, pharmaceutical, cosmetics, etc.).