Tackling Dementia Together via The Australian Dementia Network (ADNeT): A Summary of Initiatives, Progress and Plans.

In 2018, the Australian Dementia Network (ADNeT) was established to bring together Australia's leading dementia researchers, people with living experience and clinicians to transform research and clinical care in the field. To address dementia diagnosis, treatment, and care, ADNeT has established three core initiatives: the Clinical Quality Registry (CQR), Memory Clinics, and Screening for Trials. Collectively, the initiatives have developed an integrated clinical and research community, driving practice excellence in this field, leading to novel innovations in diagnostics, clinical care, professional development, quality and harmonization of healthcare, clinical trials, and translation of research into practice. Australia now has a national Registry for Mild Cognitive Impairment and dementia with 55 participating clinical sites, an extensive map of memory clinic services, national Memory and Cognition Clinic Guidelines and specialized screening for trials sites in five states. This paper provides an overview of ADNeT's achievements to date and future directions. With the increase in dementia cases expected over coming decades, and with recent advances in plasma biomarkers and amyloid lowering therapies, the nationally coordinated initiatives and partnerships ADNeT has established are critical for increased national prevention efforts, co-ordinated implementation of emerging treatments for Alzheimer's disease, innovation of early and accurate diagnosis, driving continuous improvements in clinical care and patient outcome and access to post-diagnostic support and clinical trials. For a heterogenous disorder such as dementia, which is now the second leading cause of death in Australia following cardiovascular disease, the case for adequate investment into research and development has grown even more compelling.

Structure of 1-alkyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ionic liquids with linear, branched, and cyclic alkyl groups.

X-ray scattering and molecular dynamics simulations have been carried out to investigate structural differences and similarities in the condensed phase between pyrrolidinium-based ionic liquids paired with the bis(trifluoromethylsulfonyl)amide (NTf2(-)) anion where the cationic tail is linear, branched, or cyclic. This is important in light of the charge and polarity type alternations that have recently been shown to be present in the case of liquids with cations of moderately long linear tails. For this study, we have chosen to use the 1-alkyl-1-methylpyrrolidinium, Pyrr(1,n(+)) with n = 5 or 7, as systems with linear tails, 1-(2-ethylhexyl)-1-methylpyrrolidinium, Pyrr(1,EtHx(+)), as a system with a branched tail, and 1-(cyclohexylmethyl)-1-methylpyrrolidinium, Pyrr(1,ChxMe(+)), as a system with a cyclic tail. We put these results into context by comparing these data with recently published results for the Pyrr(1,n(+))/NTf2(-) ionic liquids with n = 4, 6, 8, and 10.1,2 General methods for interpreting the structure function S(q) in terms of q-dependent natural partitionings are described. This allows for an in-depth analysis of the scattering data based on molecular dynamics (MD) trajectories that highlight the effect of modifying the cationic tail.

How does the ionic liquid organizational landscape change when nonpolar cationic alkyl groups are replaced by polar isoelectronic diethers?

X-ray scattering experiments and molecular dynamics simulations have been performed to investigate the structure of four room temperature ionic liquids (ILs) comprising the bis(trifluoromethylsulfonyl)amide (NTf(2)(-)) anion paired with the triethyloctylammonium (N(2228)(+)) and triethyloctylphosphonium (P(2228)(+)) cations and their isoelectronic diether analogs, the (2-ethoxyethoxy)ethyltriethylammonium (N(222(2O2O2))(+)) and (2-ethoxyethoxy)ethyltriethylphosphonium (P(222(2O2O2))(+)) cations. Agreement between simulations and experiments is good and permits a clear interpretation of the important topological differences between these systems. The first sharp diffraction peak (or prepeak) in the structure function S(q) that is present in the case of the liquids containing the alkyl-substituted cations is absent in the case of the diether substituted analogs. Using different theoretical partitioning schemes for the X-ray structure function, we show that the prepeak present in the alkyl-substituted ILs arises from polarity alternations between charged groups and nonpolar alkyl tails. In the case of the diether substituted ILs, we find considerable curling of tails. Anions can be found with high probability in two different environments: close to the cationic nitrogen (phosphorus) and also close to the two ether groups. For the two diether systems, anions are found in locations from which they are excluded in the alkyl-substituted systems. This removes the longer range (polar/nonpolar) pattern of alternation that gives rise to the prepeak in alkyl-substituted systems.

Comparing intermediate range order for alkyl- vs. ether-substituted cations in ionic liquids.

X-ray scattering data from four pairs of ionic liquids (ILs) are compared. The alkyl-substituted cations show a first sharp diffraction peak between 3 and 4 nm(-1) that is not observed for ILs having cations with ether- or hydroxy-substitutions. These observations indicate a significant difference in the intermediate range order for these liquids.

Structural study at the gas-liquid interface of 1-alkyl-3-methylimidazolium alkylsulfates using surface potential measurements.

Sum frequency generation, surface potential, and surface tension measurements have been combined on the pure ionic-liquid-gas interface for 1-alkyl-3-methylimidazolium alkylsulfate ionic liquids. The results show that surface potential of the ionic liquid generally increases as the alkyl chain on the cation or anion increases in length. This is due to the increased ordering of the surface dipole, mostly coming from the terminal methyl group of the alkyl chain. Both sum frequency generation spectroscopy and surface potential measurements suggest that the charged components, that is, the aromatic ring and the sulfate, occupy nearly the same plane at the surface for all ionic liquids studied herein.

Temperature-dependent structure of ionic liquids: X-ray scattering and simulations.

In this article we determine the temperature-dependent structure of the tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl)amide ionic liquid using a combination of X-ray scattering and molecular dynamics simulations. As in many other room-temperature ionic liquids three characteristic intermolecular peaks can be detected in the structure function S(q). A prepeak or first sharp diffraction peak is observed at about q = 0.42 A(-1). Long range anion-anion correlations are the most important contributors to this peak. In all systems we have studied to date, this prepeak is a signature of solvation asymmetry. The peak in S(q) near q = 0.75 A(-1) is the signature of ionic alternation and arises from the charge ordered separation of ions of the same charge. The most intense diffraction peak near q = 1.37 A(-1) arises from short-range separation between ions of opposite charge combined with a significant contribution from cationic carbon-carbon interactions, indicating that cationic hydrophobic tails have significant contacts.

Communication: X-ray scattering from ionic liquids with pyrrolidinium cations.

We report the structure functions obtained from x-ray scattering experiments on a series of four homologous ionic liquids. The ionic liquids are 1-alkyl-1-methylpyrrolidinium cations paired with the bis(trifluoromethylsulfonyl)amide anion, with alkyl chain lengths of n = 4, 6, 8, and 10. The structure functions display two intense diffraction peaks for values of the scattering vector q in the range from 0.6 to 1.5 Å(-1) for all samples. Both diffraction peaks shift to lower values of q for increasing temperature. First sharp diffraction peaks are observed in the structure functions for q < 0.5 Å(-1) for liquids with n = 6, 8, and 10.

Temperature-dependent structure of methyltributylammonium bis(trifluoromethylsulfonyl)amide: X ray scattering and simulations.

We report the combined results of computational and x ray scattering studies of amorphous methyltributylammonium bis(trifluoromethylsulfonyl)amide as a function of temperature. These studies included the temperature range for the normal isotropic liquid, a deeply supercooled liquid and the glass. The low q peaks in the range from 0.3 to 1.5 A(-1) in the structure function of this liquid can be properly accounted for by correlations between first and second nearest neighbors. The lowest q peak can be assigned to real space correlations between ions of the same charge, while the second peak arises mostly from nearest neighbors of opposite charge. Peaks at larger q values are mostly intramolecular in nature. While our simulated structure functions provide an excellent match to our experimental results and our experimental findings agree with previous studies reported for this liquid, the prior interpretation of the experimental data in terms of an interdigitated smectic A phase is not supported by our simulations. In this work, we introduce a set of general theoretical partitions of real and reciprocal space correlations that allow for unambiguous analysis of all intra- and interionic contributions to the structure function and coherent scattering intensity. We find that the intermolecular contributions to the x ray scattering intensity are dominated by the anions and cross terms between cations and anions for this ionic liquid.

Gas-liquid interface of room-temperature ionic liquids.

The organization of ions at the interface of ionic liquids and the vacuum is an ideal system to test new ideas and concepts on the interfacial chemistry of electrolyte systems in the limit of no solvent medium. Whilst electrolyte systems have numerous theoretical and experimental methods used to investigate their properties, the ionic liquids are relatively new and our understanding of the interfacial properties is just beginning to be explored. In this critical review, the gas-liquid interface is reviewed, as this interface does not depend on the preparation of another medium and thus produces a natural interface. The interface has been investigated by sum frequency generation vibrational spectroscopy and ultra-high vacuum techniques. The results provide a detailed molecular-level view of the surface composition and structure. These have been complemented by theoretical studies. The combinations of treatments on this interface are starting to provide a somewhat convergent description of how the ions are organized at this neat interface (108 references).

Alkyl chain interaction at the surface of room temperature ionic liquids: systematic variation of alkyl chain length (R = C(1)-C(4), C(8)) in both cation and anion of [RMIM][R-OSO(3)] by sum frequency generation and surface tension.

The gas-liquid interface of halide-free 1,3-dialkylimidazolium alkyl sulfates [RMIM][R-OSO(3)] with R chain length from C(1)-C(4) and C(8) has been studied systematically using the surface-specific sum frequency generation (SFG) vibrational spectroscopy and surface tension measurements. From the SFG spectra, vibrational modes from the methyl group of both cation and anion are observed for all ionic liquid samples considered in the present study. These results suggest the presence of both ions at the gas-liquid interface, which is further supported by surface tension measurements. Surface tension data show a decreasing trend as the alkyl chain in the imidazolium cation is varied from methyl to butyl chain, with a specific anion. A similar trend is observed when the alkyl chain of the anion is modified and the cation is fixed.

Surface chemistry of room-temperature ionic liquids.

In many applications of room-temperature ionic liquids, it has been recognized that the interface is a vital component. In electrochemistry, for instance, the electron transfer is significant to the efficiency of the solar cell and is very much dependent on the behavior of a given interface. This review presents the current state of knowledge of room-temperature ionic liquids in contact with solids, liquids, and gas phases. Experimental and molecular modeling studies have been conducted to investigate the surface structure and composition of ions in pure ionic liquids. However, surface studies on these liquids are still in its infancy and as the range of the available surface techniques and systematic investigations are increased, our understanding will improve which will lead to advances on this field.

Surface orientation of 1-methyl-, 1-ethyl-, and 1-butyl-3-methylimidazolium methyl sulfate as probed by sum-frequency generation vibrational spectroscopy.

The orientation of the ions at the surface of ionic liquids has been determined by the surface-sensitive technique sum-frequency generation vibrational spectroscopy. The results indicate that both ions are present at the first layer of the gas-liquid interface. Furthermore, the alkyl chains are found to be extended toward the gas phase and away from the liquid phase. The proposed models for the preferred orientation of the ions are in good agreement in comparison with the results obtained from the recent MD simulation studies. The salts considered here are 1,3-dimethylimidazolium methylsulfate, 1-ethyl-3-methylimidazolium methylsulfate, and 1-butyl-3-methylimidazolium methylsulfate.