Randomized clinical study of injectable dextrin-based hydrogel as a carrier of a synthetic bone substitute.

OBJECTIVES: This study aimed to improve the performance and mode of administration of a glass-reinforced hydroxyapatite synthetic bone substitute, Bonelike by Biosckin® (BL®), by association with a dextrin-based hydrogel, DEXGEL, to achieve an injectable and moldable device named DEXGEL Bone. METHODS: Twelve participants requiring pre-molar tooth extraction and implant placement were enrolled in this study. BL® granules (250-500 µm) were administered to 6 randomized participants whereas the other 6 received DEXGEL Bone. After 6 months, a bone biopsy of the grafted area was collected for histological and histomorphometric evaluation, prior to implant placement. The performance of DEXGEL Bone and BL® treatments on alveolar preservation were further analyzed by computed tomography and Hounsfield density analysis. Primary implant stability was analyzed by implant stability coefficient technique. RESULTS: The healing of defects was free of any local or systemic complications. Both treatments showed good osseointegration with no signs of adverse reaction. DEXGEL Bone exhibited increased granule resorption (p = 0.029) accompanied by a tendency for more new bone ingrowth (although not statistically significant) compared to the BL® group. The addition of DEXGEL to BL® granules did not compromise bone volume or density, being even beneficial for implant primary stability (p = 0.017). CONCLUSIONS: The hydrogel-reinforced biomaterial exhibited an easier handling, a better defect filling, and benefits in implant stability. CLINICAL RELEVANCE: This study validates DEXGEL Bone safety and performance as an injectable carrier of granular bone substitutes for alveolar ridge preservation. TRIAL REGISTRATION: European Databank on Medical Devices (EUDAMED) No. CIV-PT-18-01-02,705; Registo Nacional de Estudos Clínicos, RNEC, No. 30122.

Assessment of 3D-Printed Polycaprolactone, Hydroxyapatite Nanoparticles and Diacrylate Poly(ethylene glycol) Scaffolds for Bone Regeneration.

Notwithstanding the advances achieved in the last decades in the field of synthetic bone substitutes, the development of biodegradable 3D-printed scaffolds with ideal mechanical and biological properties remains an unattained challenge. In the present work, a new approach to produce synthetic bone grafts that mimic complex bone structure is explored. For the first time, three scaffolds of various composition, namely polycaprolactone (PCL), PCL/hydroxyapatite nanoparticles (HANp) and PCL/HANp/diacrylate poly(ethylene glycol) (PEGDA), were manufactured by extrusion. Following the production and characterisation of the scaffolds, an in vitro evaluation was carried out using human dental pulp stem/stromal cells (hDPSCs). Through the findings, it was possible to conclude that, in all groups, the scaffolds were successfully produced presenting networks of interconnected channels, adequate porosity for migration and proliferation of osteoblasts (approximately 50%). Furthermore, according to the in vitro analysis, all groups were considered non-cytotoxic in contact with the cells. Nevertheless, the group with PEGDA revealed hydrophilic properties (15.15° ± 4.06) and adequate mechanical performance (10.41 MPa ± 0.934) and demonstrated significantly higher cell viability than the other groups analysed. The scaffolds with PEGDA suggested an increase in cell adhesion and proliferation, thus are more appropriate for bone regeneration. To conclude, findings in this study demonstrated that PCL, HANp and PEGDA scaffolds may have promising effects on bone regeneration and might open new insights for 3D tissue substitutes.

Regeneration of critical-sized defects, in a goat model, using a dextrin-based hydrogel associated with granular synthetic bone substitute.

The development of injectable bone substitutes (IBS) have obtained great importance in the bone regeneration field, as a strategy to reach hardly accessible defects using minimally invasive techniques and able to fit to irregular topographies. In this scenario, the association of injectable hydrogels and bone graft granules is emerging as a well-established trend. Particularly, in situ forming hydrogels have arisen as a new IBS generation. An in situ forming and injectable dextrin-based hydrogel (HG) was developed, aiming to act as a carrier of granular bone substitutes and bioactive agents. In this work, the HG was associated to a granular bone substitute (Bonelike®) and implanted in goat critical-sized calvarial defects (14 mm) for 3, 6 and 12 weeks. The results showed that HG improved the handling properties of the Bonelike® granules and did not affect its osteoconductive features, neither impairing the bone regeneration process. Human multipotent mesenchymal stromal cells from the umbilical cord, extracellular matrix hydrolysates and the pro-angiogenic peptide LLKKK18 were also combined with the IBS. These bioactive agents did not enhance the new bone formation significantly under the conditions tested, according to micro-computed tomography and histological analysis.

Dextran-based tube-guides for the regeneration of the rat sciatic nerve after neurotmesis injury.

In this work, dextran-based nerve tube-guides were prepared, characterized and used in a standardized animal model of neurotmesis injury. Non-porous and porous transparent tube-guides were obtained by photocrosslinking of two co-macromonomers based on dextran and poly(ε-caprolactone) (PCL). Swelling capacity of the tube-guides ranged from 40-60% with no visible constriction of their inner diameter. In vitro hydrolytic degradation tests showed that the tube-guides maintained their structural integrity up to 6 months. The in vivo performance of the tube-guides was evaluated by entubulation of the rat sciatic nerve after a neurotmesis injury, with a 10 mm-gap between the nerve stumps. The results showed that the tube-guides were able to promote the regeneration of the nerve in a similar manner to what was observed with conventional techniques (nerve graft and end-to-end suture). Stereological analysis proved that nerve regeneration occurred, and both tube-guides presented fibre diameter and g-ratio closer to healthy sciatic nerves. The histomorphometric analysis of Tibialis anterior (TA) skeletal muscle showed decreased neurogenic atrophy in the porous tube-guides treated group, presenting measurements that are similar to the uninjured control.

In vivo systemic toxicity assessment of an oxidized dextrin-based hydrogel and its effectiveness as a carrier and stabilizer of granular synthetic bone substitutes.

The worldwide incidence of bone disorders is raising, mainly due to aging population. The lack of effective treatments is pushing the development of synthetic bone substitutes (SBSs). Most ceramic-based SBSs commercially available display limited handling properties. Attempting to solve these issues and achieve wider acceptance by the clinicians, granular ceramics have been associated with hydrogels (HGs) to produce injectable/moldable SBSs. Dextrin, a low-molecular-weight carbohydrate, was used to develop a fully resorbable and injectable HG. It was first oxidized with sodium periodate and then cross-linked with adipic acid dihydrazide. The in vivo biocompatibility and safety of the dextrin-based HG was assessed by subacute systemic toxicity and skin sensitization tests, using rodent models. The results showed that the HG did not induce any systemic toxic effect, skin reaction, or genotoxicity, neither impaired the bone repair/regeneration process. Then, the HG was successfully combined with granular bone substitute, registered as Bonelike (250-500 µm) to obtain a moldable/injectable SBS, which was implanted in tibial fractures in goats for 3 and 6 weeks. The obtained results showed that HG allowed the stabilization of the granules into the defect, ensuring effective handling, and molding properties of the formulation, as well as an efficient cohesion of the granules. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1678-1689, 2019.

Application of Bonelike® as synthetic bone graft in orthopaedic and oral surgery in veterinary clinical cases.

Autologous bone remains the gold standard grafting substrate for bone fusions used for small gaps and critical defects. However, significant morbidity is associated with the harvesting of autologous bone grafts and, for that reason, alternative bone graft substitutes have been developed. In the present case series, a glass-reinforced hydroxyapatite synthetic bone substitute, with osteoinductive and osteoconductive proprieties, was applied. This synthetic bone substitute comprises the incorporation of P2O5-CaO glass-based system within a hydroxyapatite matrix, moulded into spherical pellets with 250-500 µm of diameter. A total of 14 veterinary clinical cases of appendicular bone defects and maxillary / mandibular bone defects are described. In all clinical cases, the synthetic bone substitute was used to fill bone defects, enhancing bone regeneration and complementing the recommended surgical techniques. Results demonstrated that it is an appropriate synthetic bone graft available to be used in veterinary patients. It functioned as a space filler in association with standard orthopaedic and odontological procedures of stabilization, promoting a faster bone fusion without any local or systemic adverse reactions. This procedure improves the animals' quality of life, decreasing pain and post-operative recovery period, as well as increasing bone stability improving positive clinical outcomes.

Long term performance evaluation of small-diameter vascular grafts based on polyvinyl alcohol hydrogel and dextran and MSCs-based therapies using the ovine pre-clinical animal model.

The functional and structural performance of a 5cm synthetic small diameter vascular graft (SDVG) produced by the copolymerization of polyvinyl alcohol hydrogel with low molecular weight dextran (PVA/Dx graft) associated to mesenchymal stem cells (MSCs)-based therapies and anticoagulant treatment with heparin, clopidogrel and warfarin was tested using the ovine model during the healing period of 24 weeks. The results were compared to the ones obtained with standard expanded polyetetrafluoroethylene grafts (ePTFE graft). Blood flow, vessel and graft diameter measurements, graft appearance and patency rate (PR), thrombus, stenosis and collateral vessel formation were evaluated by B-mode ultrasound, audio and color flow Doppler. Graft and regenerated vessels morphologic evaluation was performed by scanning electronic microscopy (SEM), histopathological and immunohistochemical analysis. All PVA/Dx grafts could maintain a similar or higher PR and systolic/diastolic laminar blood flow velocities were similar to ePTFE grafts. CD14 (macrophages) and α-actin (smooth muscle) staining presented similar results in PVA/Dx/MSCs and ePTFE graft groups. Fibrosis layer was lower and endothelial cells were only detected at graft-artery transitions where it was added the MSCs. In conclusion, PVA/Dx graft can be an excellent scaffold candidate for vascular reconstruction, including clinic mechanically challenging applications, such as SDVGs, especially when associated to MSCs-based therapies to promote higher endothelialization and lower fibrosis of the vascular prosthesis, but also higher PR values.

Evaluation of PVA biodegradable electric conductive membranes for nerve regeneration in axonotmesis injuries: the rat sciatic nerve animal model.

The therapeutic effect of three polyvinyl alcohol (PVA) membranes loaded with electrically conductive materials - carbon nanotubes (PVA-CNTs) and polypyrrole (PVA-PPy) - were tested in vivo for neuro-muscular regeneration after an axonotmesis injury in the rat sciatic nerve. The membranes electrical conductivity measured was 1.5 ± 0.5 × 10-6 S/m, 579 ± 0.6 × 10-6 S/m, and 1837.5 ± 0.7 × 10-6 S/m, respectively. At week-12, a residual motor and nociceptive deficit were present in all treated groups, but at week-12, a better recovery to normal gait pattern of the PVA-CNTs and PVA-PPy treated groups was observed. Morphometrical analysis demonstrated that PVA-CNTs group presented higher myelin thickness and lower g-ratio. The tibialis anterior muscle, in the PVA-PPy and PVA-CNTs groups showed a 9% and 19% increase of average fiber size area and a 5% and 10% increase of the "minimal Feret's diameter," respectively. No inflammation, degeneration, fibrosis or necrosis were detected in lung, liver, kidneys, spleen, and regional lymph nodes and absence of carbon deposits was confirmed with Von Kossa and Masson-Fontana stains. In conclusion, the membranes of PVA-CNTs and PVA-PPy are biocompatible and have electrical conductivity. The higher electrical conductivity measured in PVA-CNTs membrane might be responsible for the positive results on maturation of myelinated fibers. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1267-1280, 2017.

Inflammatory response to dextrin-based hydrogel associated with human mesenchymal stem cells, urinary bladder matrix and Bonelike® granules in rat subcutaneous implants.

Increasing relevance has been attributed to hydrogels due to their ability to provide an extracellular matrix (ECM)-like environment for cellular adhesion and proliferation, acting as mechanical scaffolds for tissue remodeling or as delivery matrices. In vivo biocompatibility of a hybrid dextrin hydrogel produced from oxidized dextrin and adipic acid dihydrazide and its combinations with human mesenchymal stem cells (hMSCs), ECM from a porcine bladder (urinary bladder matrix) and ceramic granules (Bonelike®), was evaluated following ISO 10993 after subcutaneous implantation in a rat model. Histological analysis after 3 and 15 d showed typical acute and chronic inflammatory responses, respectively, with a more severe reaction exhibited whenever the ceramic granules were present. However, the dextrin hydrogel was able to stabilize granules in the implant site. Dextrin hydrogel was scored as slight irritant after 3 d, similar to its combination with UBM, and as non-irritant after 15 d. The presence of viable hMSCs in the subcutaneous tissue could be confirmed by the presence of anti-human nuclei antibody (HuNu+) cells. The production of growth factors and inflammatory and immunomodulatory cytokines by these cells was also quantified in peripheral blood confirming the successful encapsulation of hMSCs into the hydrogel matrix for cell survival promotion. The presence of hMSCs seemed to modulate the inflammatory response by accelerating its progression when compared to the acellular experimental groups. Dextrin hydrogel has proven to be a biocompatible multifunctional matrix for minimally invasive biomedical procedures, including orthopedic surgeries when associated with bone substitutes and also as a possible encapsulation matrix for cell-based therapies.

Long term performance evaluation of small-diameter vascular grafts based on polyvinyl alcohol hydrogel and dextran and MSCs-based therapies using the ovine pre-clinical animal model.

The functional and structural performance of a 5cm synthetic small diameter vascular graft (SDVG) produced by the copolymerization of polyvinyl alcohol hydrogel with low molecular weight dextran (PVA/Dx graft) associated to mesenchymal stem cells (MSCs)-based therapies and anticoagulant treatment with heparin, clopidogrel and warfarin was tested using the ovine model during the healing period of 24 weeks. The results were compared to the ones obtained with standard expanded polyetetrafluoroethylene grafts (ePTFE graft). Blood flow, vessel and graft diameter measurements, graft appearance and patency rate (PR), thrombus, stenosis and collateral vessel formation were evaluated by B-mode ultrasound, audio and color flow Doppler. Graft and regenerated vessels morphologic evaluation was performed by scanning electronic microscopy (SEM), histopathological and immunohistochemical analysis. All PVA/Dx grafts could maintain a similar or higher PR and systolic/diastolic laminar blood flow velocities were similar to ePTFE grafts. CD14 (macrophages) and α-actin (smooth muscle) staining presented similar results in PVA/Dx/MSCs and ePTFE graft groups. Fibrosis layer was lower and endothelial cells were only detected at graft-artery transitions where it was added the MSCs. In conclusion, PVA/Dx graft can be an excellent scaffold candidate for vascular reconstruction, including clinic mechanically challenging applications, such as SDVGs, especially when associated to MSCs-based therapies to promote higher endothelialization and lower fibrosis of the vascular prosthesis, but also higher PR values.

Evaluation of biodegradable electric conductive tube-guides and mesenchymal stem cells.

AIM: To study the therapeutic effect of three tube-guides with electrical conductivity associated to mesenchymal stem cells (MSCs) on neuro-muscular regeneration after neurotmesis. METHODS: Rats with 10-mm gap nerve injury were tested using polyvinyl alcohol (PVA), PVA-carbon nanotubes (CNTs) and MSCs, and PVA-polypyrrole (PPy). The regenerated nerves and tibialis anterior muscles were processed for stereological studies after 20 wk. The functional recovery was assessed serially for gait biomechanical analysis, by extensor postural thrust, sciatic functional index and static sciatic functional index (SSI), and by withdrawal reflex latency (WRL). In vitro studies included cytocompatibility, flow cytometry, reverse transcriptase polymerase chain reaction and karyotype analysis of the MSCs. Histopathology of lung, liver, kidneys, and regional lymph nodes ensured the biomaterials biocompatibility. RESULTS: SSI remained negative throughout and independently from treatment. Differences between treted groups in the severity of changes in WRL existed, showing a faster regeneration for PVA-CNTs-MSCs (P < 0.05). At toe-off, less acute ankle joint angles were seen for PVA-CNTs-MSCs group (P = 0.051) suggesting improved ankle muscles function during the push off phase of the gait cycle. In PVA-PPy and PVA-CNTs groups, there was a 25% and 42% increase of average fiber area and a 13% and 21% increase of the "minimal Feret's diameter" respectively. Stereological analysis disclosed a significantly (P < 0.05) increased myelin thickness (M), ratio myelin thickness/axon diameter (M/d) and ratio axon diameter/fiber diameter (d/D; g-ratio) in PVA-CNT-MSCs group (P < 0.05). CONCLUSION: Results revealed that treatment with MSCs and PVA-CNTs tube-guides induced better nerve fiber regeneration. Functional and kinematics analysis revealed positive synergistic effects brought by MSCs and PVA-CNTs. The PVA-CNTs and PVA-PPy are promising scaffolds with electric conductive properties, bio- and cytocompatible that might prevent the secondary neurogenic muscular atrophy by improving the reestablishment of the neuro-muscular junction.

In vitro and in vivo evaluation of blood coagulation activation of polyvinyl alcohol hydrogel plus dextran-based vascular grafts.

Polyvinyl alcohol hydrogel (PVA) is a water-soluble synthetic polymer that is commonly used in biomedical applications including vascular grafting. It was argued that the copolymerization of PVA with dextran (Dx) can result in improvement of blood-biomaterial interactions. The focus of this experimental study was to assess that interaction through an in vivo and in vitro evaluation of the coagulation system activation. The thrombogenicity of the copolymer was determined by quantification of platelet adhesion through the lactate dehydrogenase assay, determination of whole blood clotting time, and by quantification of platelet activation by flow cytometry. The thrombin-antithrombin complex blood levels were also determined. The obtained results for the in vitro assays suggested a non-thrombogenic profile for PVA/Dx. Additionally in vivo coagulation and hematological parameters were determined in an animal model after PVA/Dx vascular graft implantation. For coagulation homeostasis assessment, the intrinsic and extrinsic pathway's activation was determined by measuring prothrombin time (PT) and activated partial thromboplastin time (aPTT). Other markers of coagulation and inflammation activation including d-dimers, interleukin-6, and C-reactive protein were also assessed. The PVA/Dx copolymer tended to inhibit platelet adhesion/activation process and the contact activation process for coagulation. These results were also confirmed with the in vivo experiments where the measurements for APTT, interleukin-6, and C-reactive protein parameters were normal considering the species normal range of values. The response to those events is an indicator of the in vitro and in vivo hemocompatibility of PVA/Dx and it allows us to select this biomaterial for further preclinical trials in vascular reconstruction.

MSCs conditioned media and umbilical cord blood plasma metabolomics and composition.

Human mesenchymal stem cells (hMSCs) from umbilical cord (UC) blood (UCB) and matrix are tested clinically for a variety of pathologies but in vitro expansion using culture media containing fetal bovine serum (FBS) is essential to achieve appropriate cell numbers for clinical use. Human UCB plasma (hUCBP) can be used as a supplement for hMSCs culture, since UCB is rich in soluble growth factors and due to worldwide increased number of cryopreserved UCB units in public and private banks, without the disadvantages listed for FBS. On the other hand, the culture media enriched in growth factors produced by these hMSCs in expansion (Conditioned medium--CM) can be an alternative to hMSCs application. The CM of the hMSCs from the UC might be a better therapeutic option compared to cell transplantation, as it can benefit from the local tissue response to the secreted molecules without the difficulties and complications associated to the engraftment of the allo- or xeno-transplanted cells. These facts drove us to know the detailed composition of the hUCBP and CM, by 1H-NMR and Multiplexing LASER Bead Technology. hUCBP is an adequate alternative for the FBS and the CM and hUCBP are important sources of growth factors, which can be used in MSCs-based therapies. Some of the major proliferative, chemotactic and immunomodulatory soluble factors (TGF-ß, G-CSF, GM-CSF, MCP-1, IL-6, IL-8) were detected in high concentrations in CM and even higher in hUCBP. The results from 1H-NMR spectroscopic analysis of CM endorsed a better understanding of hMSCs metabolism during in vitro culture, and the relative composition of several metabolites present in CM and hUCBP was obtained. The data reinforces the potential use of hUCBP and CM in tissue regeneration and focus the possible use of hUCBP as a substitute for the FBS used in hMSCs in vitro culture.

Cell therapy with human MSCs isolated from the umbilical cord Wharton jelly associated to a PVA membrane in the treatment of chronic skin wounds.

The healing process of the skin is a dynamic procedure mediated through a complex feedback of growth factors secreted by a variety of cells types. Despite the most recent advances in wound healing management and surgical procedures, these techniques still fail up to 50%, so cellular therapies involving mesenchymal stem cells (MSCs) are nowadays a promising treatment of skin ulcers which are a cause of high morbidity. The MSCs modulate the inflammatory local response and induce cell replacing, by a paracrine mode of action, being an important cell therapy for the impaired wound healing. The local application of human MSCs (hMSCs) isolated from the umbilical cord Wharton's jelly together with a poly(vinyl alcohol) hydrogel (PVA) membrane, was tested to promote wound healing in two dogs that were referred for clinical examination at UPVET Hospital, showing non-healing large skin lesions by the standard treatments. The wounds were infiltrated with 1000 cells/µl hMSCs in a total volume of 100 µl per cm(2) of lesion area. A PVA membrane was applied to completely cover the wound to prevent its dehydration. Both animals after the treatment demonstrated a significant progress in skin regeneration with decreased extent of ulcerated areas confirmed by histological analysis. The use of Wharton's jelly MSCs associated with a PVA membrane showed promising clinical results for future application in the treatment of chronic wounds in companion animals and humans.

Biocompatibility and hemocompatibility of polyvinyl alcohol hydrogel used for vascular grafting--In vitro and in vivo studies.

Polyvinyl alcohol hydrogel (PVA) is a synthetic polymer with an increasing application in the biomedical field that can potentially be used for vascular grafting. However, the tissue and blood-material interactions of such gels and membranes are unknown in detail. The objectives of this study were to: (a) assess the biocompatibility and (b) hemocompatibility of PVA-based membranes in order to get some insight into its potential use as a vascular graft. PVA was evaluated isolated or in copolymerization with dextran (DX), a biopolymer with known effects in blood coagulation homeostasis. The effects of the mesenchymal stem cells (MSCs) isolated from the umbilical cord Wharton's jelly in the improvement of PVA biocompatibility and in the vascular regeneration were also assessed. The biocompatibility of PVA was evaluated by the implantation of membranes in subcutaneous tissue using an animal model (sheep). Histological samples were assessed and the biological response parameters such as polymorphonuclear neutrophilic leucocytes and macrophage scoring evaluated in the implant/tissue interface by International Standards Office (ISO) Standard 10993-6 (annex E). According to the scoring system based on those parameters, a total value was obtained for each animal and for each experimental group. The in vitro hemocompatibility studies included the classic hemolysis assay and both human and sheep bloods were used. Relatively to biocompatibility results, PVA was slightly irritant to the surrounding tissues; PVA-DX or PVA plus MSCs groups presented the lowest score according to ISO Standard 10993-6. Also, PVA was considered a nonhemolytic biomaterial, presenting the lowest values for hemolysis when associated to DX.

Samarium doped glass-reinforced hydroxyapatite with enhanced osteoblastic performance and antibacterial properties for bone tissue regeneration.

A novel bioactive bone substitute with improved osteoblastic performance and effective antibacterial activity was developed, using a completely new approach based on samarium (Sm3+) doped P2O5 glass-reinforced hydroxyapatite composites (GR-HA). The composites were prepared by adding 2.5% (w/w) of the P2O5 glass to 97.5% (w/w) of HA. Four composites were developed, i.e. one non-doped composite, and three Sm3+ doped composites prepared with the P2O5 glass containing 0.5, 1 and 2 (mol%) of Sm2O3. The composites were labeled as GR-HA_control, GR-HA_0.5Sm, GR-HA_1Sm and GR-HA_2Sm. The composites were physicochemical and mechanically characterized, namely performing SEM, EDS and XRD analysis and flexural bending strength (FBS) assessment. The incorporation of Sm3+ in the GR-HA matrix resulted in the presence of a residual Sm3+ containing phase besides HA, ß-TCP and α-TCP phases, increased surface hydrophilicity and slightly higher FBS. Sm3+ doped composites exhibited improved osteoblastic cell response, as evidenced by a better F-actin cytoskeleton organization and higher cell proliferation and expression of relevant osteoblastic genes. In addition, adhesion of Staphylococcus aureus and Staphylococcus epidermidis was greatly reduced on these composites. The improved osteoblastic behavior and the antibacterial effects were dependent on the amount of Samarium in the composite, this being particularly evident in the composite with a higher Sm3+ content. Therefore, the developed composite GR-HA_2Sm appears as a successful bone substitute with osteoconductive and antibacterial properties.

A glass-reinforced hydroxyapatite and surgical-grade calcium sulfate for bone regeneration: In vivo biological behavior in a sheep model.

A glass-reinforced hydroxyapatite (HA) composite (Bonelike®) was developed for bone grafting. This biomaterial is composed of a modified HA matrix with α- and ß-tricalcium phosphate secondary phases, resulting in higher solubility than single HA type of materials. Several in vitro and in vivo studies demonstrated that Bonelike® has a highly bioactive behavior, which was also confirmed by employing granular forms of this biomaterial in orthopedics and dental applications. However, a fast consolidation vehicle was needed to promote the fixation of Bonelike® granules if applied in larger defects or in unstable sites. Surgical-grade calcium sulfate (CS), which is widely recognized as a well-tolerated and inexpensive bone graft material, was the chosen vehicle to improve the handling characteristics of Bonelike® as it can be used in the form of a powder that is mixed with a liquid to form a paste that sets in situ. After application in non-critical monocortical defects in sheep, histological, and scanning electron microscopy evaluations demonstrated that Bonelike® associated to CS functioned as a very satisfactory scaffold for bone regeneration as it achieved synchronization of the ingrowing bone with biomaterial resorption and subsequent preservation of the bone graft initial volume. Therefore, our results indicate that CS is an effective vehicle for Bonelike® granules as it facilitates their application and does not interfere with their proven highly osteoconductive properties. In the opposite way, the incorporation of Bonelike® improves the bone regeneration capabilities of CS.

Degradation studies and biological behavior on an artificial cornea material.

PURPOSE: Patients with dry eye syndrome, Stevens-Johnson syndrome, or recurrent transplant rejections are unsuitable to receive a keratoprosthesis. The present work aims at developing a highly biocompatible keratoprosthesis that could be successfully implanted in such patients. METHODS: Glass-reinforced hydroxyapatite (GRHA) was used to construct this new artificial cornea. To grant the device an adequate porosity, a porogen agent was added in the following percentages: 10, 30, and 50%. Samples were physicochemically analyzed in terms of density, porosity, roughness, degradation, and surface imaging. Biological relevance was assessed by cell culture, MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrasodium bromide) assays, and cell imaging. RESULTS: Samples B (30% porogen) and C (50% porogen) were found to be the most porous and also had the roughest topography. Degradation studies showed that under simulated physiologic conditions, no mass loss was found. Conversely, under acidic conditions, a significant mass loss was found. The biological performance of these samples was satisfactory when cultured with human fibroblasts. The MTT assay revealed that samples B and C had greater propensity to cell invasion and proliferation than that of the other tested materials. Cell imaging demonstrated that fibroblasts organized around the pore edges before colonizing it. CONCLUSIONS: A material with physicochemical and biological characteristics close to an ideal artificial cornea has been fabricated. The GRHA cornea containing 30% porogen is the most promising substitute material due to the biological performance, adequate porosity, and low degradation propensity.

Physical, chemical and in vitro biological profile of chitosan hybrid membrane as a function of organosiloxane concentration.

We attempted to prepare chitosan-silicate hybrid for use in a medical application and evaluated the physico-chemical properties and osteocompatibility of the hybrids as a function of gamma-glycidoxypropyltrimethoxysilane (GPTMS) concentration. Chitosan-silicate hybrids were synthesized using GPTMS as the reagent for cross-linking of the chitosan chains. Fourier transform infrared spectroscopy, (29)Si CP-MAS NMR spectroscopy and the ninhydrin assay were used to analyze the structures of the hybrids, and stress-strain curves were recorded to estimate their Young's modulus. The swelling ability, contact angle and cytocompatibility of the hybrids were investigated as a function of the GPTMS concentration. A certain fraction of GPTMS in each hybrid was linked at the epoxy group to the amino group of chitosan, which was associated with the change in the methoxysilane group of GPTMS due to hybridization. The cross-linking density was around 80% regardless of the volume of GPTMS. As the content of GPTMS increased, the water uptake decreased and the hydrophilicity of the hybrids increased except when the content exceeded amolar ratio of 1.5, when it caused a decrease. The values of the mechanical parameters assessed indicated that significant stiffening of the hybrids was obtained by the addition of GPTMS. The adhesion and proliferation of the MG63 osteoblast cells cultured on the chitosan-GPTMS hybrid surface were improved compared to those on the chitosan membrane, regardless of the GPTMS concentration. Moreover, human bone marrow osteoblast cells proliferated on the chitosan-GPTMS hybrid surface and formed a fibrillar extracellular matrix with numerous calcium phosphate globular structures, both in the presence and in the absence of dexamethasone. Therefore, the chitosan-GPTMS hybrids are promising candidates for basic materials that can promote bone regeneration because of their controllable composition (chitosan/GPTMS ratio).

In vitro cytocompatibility of MG63 cells on chitosan-organosiloxane hybrid membranes.

Chitosan-silicate hybrids were synthesized using gamma-glycidoxypropyltrimethoxysilane (GPSM) as the agent for cross-linking the chitosan chains. CaCl2 was introduced in the hybrids in expectation that it would improve cell adhesion and differentiation of the hybrid surfaces. Fourier-transform infrared (FT-IR) spectroscopy and 29Si CP-MAS NMR spectroscopy were used to analyze the structures of the hybrids. Cytocompatibility of the hybrids was investigated in terms of proliferation of an osteoblastic cell line, MG63. The adhesion and proliferation of the osteoblastic cells cultured on the surface of a chitosan-GPSM hybrid without calcium were similar to those on a control culture plate, and were better than those on a chitosan membrane. The ALP activity of the cells cultured on this hybrid was higher than that on the chitosan membrane. Contrary to expectations, the incorporation of calcium ions into the hybrids did not improve cell attachment and proliferation on their surfaces.