Bi2Te3 Thin Films Deposited by the Combination of Bi and Te Plasmas in a PLD Process.

Bismuth telluride thin films were grown by pulsed laser deposition by implementing a novel method that combines both Te and Bi plasmas resulting from the laser ablation of individual Bi and Te targets. Furthermore, the mean kinetic ion energy and density of the plasmas, as estimated by TOF curves obtained from Langmuir probe measurements, were used as control parameters for the deposition process. The obtained thin films exhibit a metallic mirror-like appearance and present good adhesion to the substrate. Morphology of the thin films was observed by SEM, yielding smooth surfaces where particulates were also observed (splashing). Chemical composition analysis obtained by EDS showed that apparently the films have a Te-rich composition (ratio of Te/Bi of 3); however, Te excess arises from the splashing as revealed by the structural characterization (XRD and Raman spectroscopy). The XRD pattern indicated that depositions have the rhombohedral (D3d5 (R3¯m)) structure of Bi2Te3. Likewise, Raman spectra exhibited the presence of signals that correspond to Eg2, A1u2 and A1g2(LO) vibrational modes of the same rhombohedral phase of Bi2Te3. Additionally, oxidation states, analyzed by XPS, resulted in signals associated to Bi3+ and Te2- that correspond to the Bi2Te3 compound. Finally, surface topology and thickness profiles were obtained from AFM measurements, confirming a combination of a smooth surface with particulates on top of it and a film thickness of 400 nm.

Cu2ZnSn(S,Se)4 thin-films prepared from selenized nanocrystals ink.

For the first time, CZTS ink was formulated using low-temperature heating up synthesis of NCs. Besides, the influence of powder concentration on the properties of the films was examined. Subsequently, the CZTS films were annealed under a selenium (Se)/argon (Ar) atmosphere at different temperatures to enhance their properties. The influence of selenization temperature on the properties of CZTS films was examined in detail. Structural analysis showed a peak shift towards lower 2θ values for CZTSSe films because of Se incorporation, resulting in larger lattice parameters for CZTSSe than CZTS. As the selenization temperature increases, an increment in the grain size was observed and the band gap was decreased from 1.52 to 1.05 eV. Hall Effect studies revealed a significant improvement in the mobility and carrier concentration with respect to selenization temperatures. Moreover, film selenized at 550 °C exhibited higher photoconductivity as compared to other films, indicating their potential application in the field of low-cost thin-film solar cells.

Colloidal synthesis of biocompatible iron disulphide nanocrystals.

The aim of this research was to synthesis biocompatible iron disulphide nanocrystals at different reaction temperatures using the colloidal synthesis methodology. Synthesis was conducted at the 220-240 °C range of reaction temperatures at intervals of 5 °C in an inert argon atmosphere. The toxicity of iron disulphide nanocrystals was evaluated in vitro using mouse fibroblast cell line. Two complementary assays were conducted: the first to evaluate cell viability of the fibroblast via an MTT assay and the second to determine the preservation of fibroblast nuclei integrity through DAPI staining, which labels nuclear DNA in fluorescence microscopes. Through TEM and HRTEM, we observed a cubic morphology of pyrite iron disulphide nanocrystals ranging in sizes 25-50 nm (225 °C), 50-70 nm (230 °C) and >70 nm (235 °C). Through X-ray diffraction, we observed a mixture of pyrite and pyrrohotite in the samples synthesized at 225 °C and 240 °C, showing the best photocatalytic activity at 80% and 65%, respectively, for the degradation of methylene blue after 120 minutes. In all experimental groups, iron disulphide nanocrystals were biocompatible, i.e. no statistically significant differences were observed between experimental groups as shown in a one-way ANOVA and Tukey's test. Based on all of these results, we recommend non-cytotoxic semiconductor iron sulphide nanocrystals for biomedical applications.

Nanomaterials made of non-toxic metallic sulfides: A systematic review of their potential biomedical applications.

Metallic sulfides involve the chemical bonding of one or more sulfur atoms to a metal. Metallic sulfides are cheap, abundant semiconductor materials that can be used for several applications. However, an important and emerging use for non-toxic metallic sulfides in biomedical applications has arisen quickly in the medical field. In this systematic review, the available data from electronic databases were collected according to PRISMA alignments for systematic reviews. This review shows that these metallic sulfides could be promising for biomedical uses and applications. This systematic review is focused primarily on the following compounds: silver sulfide, copper sulfide, and iron sulfide. The aim of this review was to provide a quick reference on synthesis methods, biocompatibility, recent advances and perspectives, with remarks on future improvements. The toxicity of metallic sulfides depends directly on the cytotoxicity of their interactions with cells and tissues. Metallic sulfides have potential biomedical applications due to their antibacterial properties, uses in imaging and diagnostics, therapies such as photothermal therapy and chemotherapy in tumors and cancer cells, drug delivery and the fabrication of biosensors for the sensitive and selective detection of moieties, among others. Although current evidence about metallic sulfide NPs is promising, there are still several issues to be addressed before these NPs can be used in biomedicine. The current review is a brief but significant guide to metallic sulfides and their potential uses in the biomedical field.

Molecular identification of a TTX-sensitive Ca(2+) current.

The TTX-sensitive Ca(2+) current [I(Ca(TTX))] observed in cardiac myocytes under Na(+)-free conditions was investigated using patch-clamp and Ca(2+)-imaging methods. Cs(+) and Ca(2+) were found to contribute to I(Ca(TTX)), but TEA(+) and N-methyl-D-glucamine (NMDG(+)) did not. HEK-293 cells transfected with cardiac Na(+) channels exhibited a current that resembled I(Ca(TTX)) in cardiac myocytes with regard to voltage dependence, inactivation kinetics, and ion selectivity, suggesting that the cardiac Na(+) channel itself gives rise to I(Ca(TTX)). Furthermore, repeated activation of I(Ca(TTX)) led to a 60% increase in intracellular Ca(2+) concentration, confirming Ca(2+) entry through this current. Ba(2+) permeation of I(Ca(TTX)), reported by others, did not occur in rat myocytes or in HEK-293 cells expressing cardiac Na(+) channels under our experimental conditions. The report of block of I(Ca(TTX)) in guinea pig heart by mibefradil (10 microM) was supported in transfected HEK-293 cells, but Na(+) current was also blocked (half-block at 0.45 microM). We conclude that I(Ca(TTX)) reflects current through cardiac Na(+) channels in Na(+)-free (or "null") conditions. We suggest that the current be renamed I(Na(null)) to more accurately reflect the molecular identity of the channel and the conditions needed for its activation. The relationship between I(Na(null)) and Ca(2+) flux through slip-mode conductance of cardiac Na(+) channels is discussed in the context of ion channel biophysics and "permeation plasticity."

Functional and structural features of gamma-zeathionins, a new class of sodium channel blockers.

Gamma1- and gamma2-zeathionins (gamma1-Z and gamma2-Z) are members of a family of small and basic peptides involved in plant protection. These plant defensins exhibit remarkable structural similarity to scorpion neurotoxins and insect defensins. In the present report, we used the whole-cell patch clamp technique to investigate the inhibition of the sodium current (I(Na)) by gamma1-Z and gamma2-Z in the GH3 cell line. Both gamma1-Z and gamma2-Z rapidly and reversibly inhibited I(Na) without changing the kinetics or voltage dependence of activation or inactivation. To our knowledge, this is the first example of a plant protein that inhibits the sodium channel. From structural comparisons with the mu-conotoxins, a family of peptides that block the sodium channel, we detected some similar features that could provide the basis of inhibition of sodium channels by gamma-zeathionins.