Drug-Polymer Nanodroplet Formation and Morphology Drive Solubility Enhancement of GDC-0810.

Nanodroplet formation is important to achieve supersaturation of active pharmaceutical ingredients (APIs) in an amorphous solid dispersion. The aim of the current study was to explore how polymer composition, architecture, molar mass, and surfactant concentration affect polymer-drug nanodroplet morphology with the breast cancer API, GDC-0810. The impact of nanodroplet size and morphology on dissolution efficacy and drug loading capacity was explored using polarized light microscopy, dynamic light scattering, and cryogenic transmission electron microscopy. Poly(N-isopropylacrylamide-stat-N,N-dimethylacrylamide) (PND) was synthesized as two linear derivatives and two bottlebrush derivatives with carboxylated or PEGylated end-groups. Hydroxypropyl methylcellulose acetate succinate grade MF (HPMCAS-MF) and poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA) were included as commercial polymer controls. We report the first copolymerization synthesis of a PVPVA bottlebrush copolymer, which was the highest performing excipient in this study, maintaining 688 µg/mL GDC-0810 concentration at 60 wt % drug loading. This is likely due to strong polymer-drug noncovalent interactions and the compaction of GDC-0810 along the PVPVA bottlebrush backbone. Overall, it was observed that the most effective formulations had a hydrodynamic radius less than 25 nm with tightly compacted nanodroplet morphologies.

Process Robustness in Lipid Nanoparticle Production: A Comparison of Microfluidic and Turbulent Jet Mixing.

The recent clinical and commercial success of lipid nanoparticles (LNPs) for nucleic acid delivery has incentivized the development of new technologies to manufacture LNPs. As new technologies emerge, researchers must determine which technologies to assess and how to perform comparative evaluations. In this article, we use a quality-by-design approach to systematically investigate how the mixer technology used to form LNPs influences LNPstructure. Specifically, a coaxial turbulent jet mixer and a staggered herringbone microfluidic mixer were systematically compared via matched formulation and process conditions. A full-factorial design-of-experiments study with three factors and three levels was executed for each mixer to compare process robustness in the production of antisense oligonucleotide (ASO) LNPs. ASO-LNPs generated with the coaxial turbulent jet mixer were consistently smaller, had a narrower particle size distribution, and had a higher ASO encapsulation as compared to the microfluidic mixer, but had a greater variation in internal structure with less ordered cores. A subset of the study was replicated for mRNA-LNPs with comparable trends in particle size and encapsulation, but more frequent bleb features for LNPs produced by the coaxial turbulent jet mixer. The study design used here provides a road map for how researchers may compare different mixer technologies (or process changes more broadly) and how such studies can inform process robustness and manufacturing control strategies.

Correlating the Structure and Gene Silencing Activity of Oligonucleotide-Loaded Lipid Nanoparticles Using Small-Angle X-ray Scattering.

With three FDA-approved products, lipid nanoparticles (LNPs) are under intensive development for delivering wide-ranging nucleic acid therapeutics. A significant challenge for LNP development is insufficient understanding of structure-activity relationship (SAR). Small changes in chemical composition and process parameters can affect LNP structure, significantly impacting performance in vitro and in vivo. The choice of polyethylene glycol lipid (PEG-lipid), one of the essential lipids for LNP, has been proven to govern particle size. Here we find that PEG-lipids can further modify the core organization of antisense oligonucleotide (ASO)-loaded LNPs to govern its gene silencing activity. Furthermore, we also have found that the extent of compartmentalization, measured by the ratio of disordered vs ordered inverted hexagonal phases within an ASO-lipid core, is predictive of in vitro gene silencing. In this work, we propose that a lower ratio of disordered/ordered core phases correlates with stronger gene knockdown efficacy. To establish these findings, we developed a seamless high-throughput screening approach that integrated an automated LNP formulation system with structural analysis by small-angle X-ray scattering (SAXS) and in vitro TMEM106b mRNA knockdown assessment. We applied this approach to screen 54 ASO-LNP formulations while varying the type and concentration of PEG-lipids. Representative formulations with diverse SAXS profiles were further visualized using cryogenic electron microscopy (cryo-EM) to help structural elucidation. The proposed SAR was built by combining this structural analysis with in vitro data. Our integrated methods, analysis, and resulting findings on PEG-lipid can be applied to rapidly optimize other LNP formulations in a complex design space.

Ultrasound-mediated delivery of flexibility-tunable polymer drug conjugates for treating glioblastoma.

Effective chemotherapy delivery for glioblastoma multiforme (GBM) is limited by drug transport across the blood-brain barrier and poor efficacy of single agents. Polymer-drug conjugates can be used to deliver drug combinations with a ratiometric dosing. However, the behaviors and effectiveness of this system have never been well investigated in GBM models. Here, we report flexible conjugates of hyaluronic acid (HA) with camptothecin (CPT) and doxorubicin (DOX) delivered into the brain using focused ultrasound (FUS). In vitro toxicity assays reveal that DOX-CPT exhibited synergistic action against GBM in a ratio-dependent manner when delivered as HA conjugates. FUS is employed to improve penetration of DOX-HA-CPT conjugates into the brain in vivo in a murine GBM model. Small-angle x-ray scattering characterizations of the conjugates show that the DOX:CPT ratio affects the polymer chain flexibility. Conjugates with the highest flexibility yield the highest efficacy in treating mouse GBM in vivo. Our results demonstrate the association of FUS-enhanced delivery of combination chemotherapy and the drug-ratio-dependent flexibility of the HA conjugates. Drug ratio in the polymer nanocomplex may thus be employed as a key factor to modulate FUS drug delivery efficiency via controlling the polymer flexibility. Our characterizations also highlight the significance of understanding the flexibility of drug carriers in ultrasound-mediated drug delivery systems.

Nonspherical ultrasound microbubbles.

Surface tension provides microbubbles (MB) with a perfect spherical shape. Here, we demonstrate that MB can be engineered to be nonspherical, endowing them with unique features for biomedical applications. Anisotropic MB were generated via one-dimensionally stretching spherical poly(butyl cyanoacrylate) MB above their glass transition temperature. Compared to their spherical counterparts, nonspherical polymeric MB displayed superior performance in multiple ways, including i) increased margination behavior in blood vessel-like flow chambers, ii) reduced macrophage uptake in vitro, iii) prolonged circulation time in vivo, and iv) enhanced blood-brain barrier (BBB) permeation in vivo upon combination with transcranial focused ultrasound (FUS). Our studies identify shape as a design parameter in the MB landscape, and they provide a rational and robust framework for further exploring the application of anisotropic MB for ultrasound-enhanced drug delivery and imaging applications.

Impact of non-ionizable lipids and phase mixing methods on structural properties of lipid nanoparticle formulations.

Lipid nanoparticles (LNPs) have been widely investigated for nucleic acid therapeutic delivery, and demonstrated their potential in enabling new mRNA vaccines. LNPs are usually formulated with multi-lipid components and the composition variables may impact their structural properties. Here, we investigated the impact of helper lipids on physicochemical properties of LNPs using a Design of Experiments (DoE) definitive screening design. Phospholipid head group, degree of unsaturation, ratio to cholesterol as well as PEG-lipid content were varied and a series of 14 LNPs were prepared by microfluidic- and solvent-injection mixing. Solvent-injection mixing by a robotic liquid handler yielded 50-225 nm nanoparticles with highly ordered, ∼5 nm inter-lamellar spacing as measured by small angle X-ray scattering (SAXS) and confirmed by cryo-transmission electron microscopy (cryo-EM). In contrast, microfluidic mixing resulted in less ordered, notably smaller (50-75 nm) and more homogenous nanoparticles. Significant impacts of the stealth-lipid DSPE-PEG2000 on nanoparticle size, polydispersity and encapsulation efficiency of an oligonucleotide cargo were observed in LNPs produced by both methods, while varying the phospholipid type and content had only marginal effect on these physicochemical properties. These findings suggest that from a physicochemical perspective, the design space for combinations of helper lipids in LNPs may be considerably larger than anticipated based on the conservative formulation composition of the currently FDA-approved LNPs, thereby opening opportunities for screening and optimization of novel LNP formulations.

Predictive high-throughput screening of PEGylated lipids in oligonucleotide-loaded lipid nanoparticles for neuronal gene silencing.

Lipid nanoparticles (LNPs) are gaining traction in the field of nucleic acid delivery following the success of two mRNA vaccines against COVID-19. As one of the constituent lipids on LNP surfaces, PEGylated lipids (PEG-lipids) play an important role in defining LNP physicochemical properties and biological interactions. Previous studies indicate that LNP performance is modulated by tuning PEG-lipid parameters including PEG size and architecture, carbon tail type and length, as well as the PEG-lipid molar ratio in LNPs. Owing to these numerous degrees of freedom, a high-throughput approach is necessary to fully understand LNP behavioral trends over a broad range of PEG-lipid variables. To this end, we report a low-volume, automated, high-throughput screening (HTS) workflow for the preparation, characterization, and in vitro assessment of LNPs loaded with a therapeutic antisense oligonucleotide (ASO). A library of 54 ASO-LNP formulations with distinct PEG-lipid compositions was prepared using a liquid handling robot and assessed for their physiochemical properties as well as gene silencing efficacy in murine cortical neurons. Our results show that the molar ratio of anionic PEG-lipid in LNPs regulates particle size and PEG-lipid carbon tail length controls ASO-LNP gene silencing activity. ASO-LNPs formulated using PEG-lipids with optimal carbon tail lengths achieved up to 5-fold lower mRNA expression in neurons as compared to naked ASO. Representative ASO-LNP formulations were further characterized using dose-response curves and small-angle X-ray scattering to understand structure-activity relationships. Identified hits were also tested for efficacy in primary murine microglia and were scaled-up using a microfluidic formulation technique, demonstrating a smooth translation of ASO-LNP properties and in vitro efficacy. The reported HTS workflow can be used to screen additional multivariate parameters of LNPs with significant time and material savings, therefore guiding the selection and scale-up of optimal formulations for nucleic acid delivery to a variety of cellular targets.

Particle shape engineering for improving safety and efficacy of doxorubicin - A case study of rod-shaped carriers in resistant small cell lung cancer.

Therapeutic drug delivery is known to be influenced by interplay between various design parameters of delivery carriers which influence the drug uptake efficiency and subsequently the effectiveness of treatment. Amongst, the several design parameters such as size, shape and surface charge, particle shape is gaining attention as a crucial design parameter for development of robust and efficient delivery carriers. In this exploration, we investigated the influence of particle shape on injectability and therapeutic effectiveness of the delivery carriers using doxorubicin (DOX) conjugated polymeric microparticles. Results of injectability experiments demonstrated the influence of particle shape with anisotropic rod-shaped particles displaying increased injectability as against spherical particles. Impact of particle shape on therapeutic effectiveness was assessed against small cell lung cancer (SCLC) which was selected as a model disease. Results of cellular uptake studies revealed preferential uptake of rod-shaped particles than spherical particles in cancer cells. These results were further validated by in-vitro tumor simulation studies wherein rod-shaped particles displayed enhanced anti-tumorigenic activity along with distortion of tumor integrity against spheres. Furthermore, the impact of particle size was also assessed on cardiotoxicity, an adverse effect of DOX which limits its therapeutic use. Results illustrated that the high aspect ratio particles displayed diminished cardiotoxicity activity. These results provide valuable insights about influence of particle shape for designing efficient therapeutics.

Injectable hyaluronic acid hydrogels encapsulating drug nanocrystals for long-term treatment of inflammatory arthritis.

Antiproliferative chemotherapeutic agents offer a potential effective treatment for inflammatory arthritis. However, their clinical application is limited by high systemic toxicity, low joint bioavailability as well as formulation challenges. Here, we report an intra-articular drug delivery system combining hyaluronic acid hydrogels and drug nanocrystals to achieve localized and sustained delivery of an antiproliferative chemotherapeutic agent camptothecin for long-term treatment of inflammatory arthritis. We synthesized a biocompatible, in situ-forming injectable hyaluronic acid hydrogel using a naturally occurring click chemistry: cyanobenzothiazole/cysteine reaction, which is the last step reaction in synthesizing D-luciferin in fireflies. This hydrogel was used to encapsulate camptothecin nanocrystals (size of 160-560 nm) which released free camptothecin in a sustained manner for 4 weeks. In vivo studies confirmed that the hydrogel remained in the joint over 4 weeks. By using the collagen-induced arthritis rat model, we demonstrate that the hydrogel-camptothecin formulation could alleviate arthritis severity as indicated by the joint size and interleukin-1ß level in the harvested joints, as well as from histological and microcomputed tomography evaluation of joints. The hydrogel-nanocrystal formulation strategy described here offers a potential solution for intra-articular therapy for inflammatory arthritis.

Bioinspired particle engineering for non-invasive inhaled drug delivery to the lungs.

Pulmonary drug delivery is governed by several biophysical parameters of delivery carriers, such as particle size, shape, density, charge, and surface modifications. Although much attention has been given to other parameters, particle shape effects have rarely been explored. In this work, we assess the influence of particle shape of inhaled delivery carriers on their aerodynamic properties and macrophage uptake by using polymeric microparticles of different geometries ranging in various sizes. Doxorubicin was conjugated to the polymer particles and the bioconjugates were characterized. Interestingly, the results of in-vitro lung deposition, performed using a next generation impactor, demonstrated a significant improvement in the aerodynamic properties of the rod-shaped particles with a high aspect ratio as compared to spherical particles with the same equivalent volume. The results of a macrophage uptake experiment demonstrate that the high aspect ratio particles were phagocytosed less than spherical particles. Furthermore, the cytotoxicity of these doxorubicin-conjugated particles was determined against murine macrophages, resulting in reduced toxicity when treated with high aspect ratio particles as compared to spherical particles. This project provides valuable insights into the influence of particle shape on aerodynamic properties and primary defense mechanisms in the peripheral lungs, while using polymeric microparticles of various sizes and geometries. Further systematic development can help translate these findings to preclinical and clinical studies for designing efficient inhalable delivery carriers.

Hyaluronic acid conjugates for topical treatment of skin cancer lesions.

Skin cancer is one of the most common types of cancer in the United States and worldwide. Topical products are effective for treating cancerous skin lesions when surgery is not feasible. However, current topical products induce severe irritation, light-sensitivity, burning, scaling, and inflammation. Using hyaluronic acid (HA), we engineered clinically translatable polymer-drug conjugates of doxorubicin and camptothecin termed, DOxorubicin and Camptothecin Tailored at Optimal Ratios (DOCTOR) for topical treatment of skin cancers. When compared to the clinical standard, Efudex, DOCTOR exhibited high cancer-cell killing specificity with superior safety to healthy skin cells. In vivo studies confirmed its efficacy in treating cancerous lesions without irritation or systemic absorption. When tested on patient-derived primary cells and live-skin explants, DOCTOR killed the cancer with a selectivity as high as 21-fold over healthy skin tissue from the same donor. Collectively, DOCTOR provides a safe and potent option for treating skin cancer in the clinic.

Automated high-throughput preparation and characterization of oligonucleotide-loaded lipid nanoparticles.

Lipid nanoparticles (LNPs) are increasingly employed to improve delivery efficiency and therapeutic efficacy of nucleic acids. Various formulation parameters can affect the quality attributes of these nanoparticle formulations, but currently there is a lack of systemic screening approaches to address this challenge. Here, we developed an automated high-throughput screening (HTS) workflow for streamline preparation and analytical characterization of LNPs loaded with antisense oligonucleotides (ASOs) in a full 96-well plate within 3 hrs. ASO-loaded LNPs were formulated by an automated solvent-injection method using a robotic liquid handler, and assessed for particle size distribution, encapsulation efficiency, and stability with different formulation compositions and ASO loadings. Results indicated that the PEGylated lipid content significantly affected the particle size distribution, while the ionizable lipid / ASO charge ratio impacted the encapsulation efficiency of ASOs. Furthermore, results from our HTS approach correlated with those from the state-of-the-art scale-up method using a microfluidic formulator, therefore opening up a new avenue for robust formulation development and design of experiment methods, while reducing material usage by 10 folds, improving analytical outputs and accumulation of information by 100 folds.

A polymer-based systemic hemostatic agent.

Uncontrolled noncompressible hemorrhage is a major cause of mortality following traumatic injuries in civilian and military populations. An injectable hemostat for point-of-care treatment of noncompressible hemorrhage represents an urgent medical need. Here, we describe an injectable hemostatic agent via polymer peptide interfusion (HAPPI), a hyaluronic acid conjugate with a collagen-binding peptide and a von Willebrand factor-binding peptide. HAPPI exhibited selective binding to activated platelets and promoted their accumulation at the wound site in vitro. In vivo studies in mouse tail vein laceration model demonstrated a reduction of >97% in both bleeding time and blood loss. A 284% improvement in the survival time was observed in the rat inferior vena cava traumatic model. Lyophilized HAPPI could be stably stored at room temperature for several months and reconstituted during therapeutic intervention. HAPPI provides a potentially clinically translatable intravenous hemostat.

Layered self-assemblies for controlled drug delivery: A translational overview.

Self-assembly is a prominent phenomenon observed in nature. Inspired by this thermodynamically favorable approach, several natural and synthetic materials have been investigated to develop functional systems for various biomedical applications, including drug delivery. Furthermore, layered self-assembled systems provide added advantages of tunability and multifunctionality which are crucial for controlled and targeted drug release. Layer-by-layer (LbL) deposition has emerged as one of the most popular, well-established techniques for tailoring such layered self-assemblies. This review aims to provide a brief overview of drug delivery applications using LbL deposition, along with a discussion of associated scalability challenges, technological innovations to overcome them, and prospects for commercial translation of this versatile technique. Additionally, alternative self-assembly techniques such as metal-phenolic networks (MPNs) and Liesegang rings are also reviewed in the context of their recent utilization for controlled drug delivery. Blending the sophistication of these self-assembly phenomena with material science and technological advances can provide a powerful tool to develop smart drug carriers in a scalable manner.

Development of inhalable quinacrine loaded bovine serum albumin modified cationic nanoparticles: Repurposing quinacrine for lung cancer therapeutics.

Drug repurposing is on the rise as an atypical strategy for discovery of new molecules, involving use of pre-existing molecules for a different therapeutic application than the approved indication. Using this strategy, the current study aims to leverage effects of quinacrine (QA), a well-known anti-malarial drug, for treatment of non-small cell lung cancer (NSCLC). For respiratory diseases, designing a QA loaded inhalable delivery system has multiple advantages over invasive delivery. QA-loaded nanoparticles (NPs) were thus prepared using polyethyleneimine (PEI) as a cationic stabilizer. While the use of PEI provided cationic charge on the particles, it also mediated a burst release of QA and demonstrated potential particle toxicity. These concerns were circumvented by coating nanoparticles with bovine serum albumin (BSA), which retained the cationic charge, reduced NP toxicity and modulated QA release. Prepared nanoparticles were characterized for physicochemical properties along with their aerosolization potential. Therapeutic efficacy of the formulations was tested in different NSCLC cells. Mechanism of higher anti-proliferation was evaluated by studying cell cycle profile, apoptosis and molecular markers involved in the progression of lung cancer. BSA coated QA nanoparticles demonstrated good aerosolization potential with a mass median aerodynamic diameter of significantly less than 5 µm. Nanoparticles also demonstrated improved therapeutic efficacy against NSCLC cells in terms of low IC50 values, cell cycle arrest at G2/M phase and autophagy inhibition leading to increased apoptosis. BSA coated QA NPs also demonstrated enhanced therapeutic efficacy in a 3D cell culture model. The present study thus lays solid groundwork for pre-clinical and eventual clinical studies as a standalone therapy and in combination with existing chemotherapeutics.

Cyclodextrin modified erlotinib loaded PLGA nanoparticles for improved therapeutic efficacy against non-small cell lung cancer.

This study was aimed at developing a nanoparticle strategy to overcome acquired resistance against erlotinib in non-small cell lung cancer (NSCLC). To load erlotinib on biodegradable PLGA nanoparticles, erlotinib-cyclodextrin (Erlo-CD) complex was prepared using ß-cyclodextrin sulfobutyl ether, which was in turn loaded in the core of PLGA nanoparticles using multiple emulsion solvent evaporation. Nanoparticles were characterized for size distribution, entrapment and loading efficiency, in-vitro release, and therapeutic efficacy against different lung cancer cells. Effect of formulation on cell cycle, apoptosis, and other markers was evaluated using flow cytometry and western blotting studies. The efficacy of optimized nanoformulation was evaluated using a clinically relevant in-vitro 3D-spheroid model. Results showed that Erlo-CD loaded nanoparticles (210 ±â€¯8 nm in size) demonstrated 3-fold higher entrapment (61.5 ±â€¯3.2% vs 21.9 ±â€¯3.7% of plain erlotinib loaded nanoparticles) with ~5% loading efficiency and sustained release characteristics. Developed nanoparticles demonstrated significantly improved therapeutic efficacy against NSCLC cells in terms of low IC50 values and suppressed colony forming ability of cancer cells, increased apoptosis, and autophagy inhibition. Interestingly, 3D spheroid study demonstrated better anticancer activity of Erlo-CD nanoparticles compared to plain erlotinib. Present study has shown a premise to improve therapeutic efficacy against erlotinib-resistant lung cancer using modified nanoErlo formulations.

Treating Tumors at Low Drug Doses Using an Aptamer-Peptide Synergistic Drug Conjugate.

Combination chemotherapy must strike a difficult balance between safety and efficacy. Current regimens suffer from poor therapeutic impact because drugs are given at their maximum tolerated dose (MTD), which compounds the toxicity risk and exposes tumors to non-optimal drug ratios. A modular framework has been developed that selectively delivers drug combinations at synergistic ratios via tumor-targeting aptamers for effective low-dose treatment. A nucleolin-recognizing aptamer was coupled to peptide scaffolds laden with precise ratios of doxorubicin (DOX) and camptothecin (CPT). This construct had an extremely low IC50 (31.9 nm) against MDA-MB-231 breast cancer cells in vitro, and exhibited in vivo efficacy at micro-dose injections (500 and 350 µg kg-1 dose-1 of DOX and CPT, respectively) that are 20-30-fold lower than their previously-reported MTDs. This approach represents a generalizable strategy for the safe and consistent delivery of combination drugs in oncology.

Influence of particle size and shape on their margination and wall-adhesion: implications in drug delivery vehicle design across nano-to-micro scale.

Intravascular drug delivery technologies majorly utilize spherical nanoparticles as carrier vehicles. Their targets are often at the blood vessel wall or in the tissue beyond the wall, such that vehicle localization towards the wall (margination) becomes a pre-requisite for their function. To this end, some studies have indicated that under flow environment, micro-particles have a higher propensity than nano-particles to marginate to the wall. Also, non-spherical particles theoretically have a higher area of surface-adhesive interactions than spherical particles. However, detailed systematic studies that integrate various particle size and shape parameters across nano-to-micro scale to explore their wall-localization behavior in RBC-rich blood flow, have not been reported. We address this gap by carrying out computational and experimental studies utilizing particles of four distinct shapes (spherical, oblate, prolate, rod) spanning nano- to-micro scale sizes. Computational studies were performed using the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) package, with Dissipative Particle Dynamics (DPD). For experimental studies, model particles were made from neutrally buoyant fluorescent polystyrene spheres, that were thermo-stretched into non-spherical shapes and all particles were surface-coated with biotin. Using microfluidic setup, the biotin-coated particles were flowed over avidin-coated surfaces in absence versus presence of RBCs, and particle adhesion and retention at the surface was assessed by inverted fluorescence microscopy. Our computational and experimental studies provide a simultaneous analysis of different particle sizes and shapes for their retention in blood flow and indicate that in presence of RBCs, micro-scale non-spherical particles undergo enhanced 'margination + adhesion' compared to nano-scale spherical particles, resulting in their higher binding. These results provide important insight regarding improved design of vascularly targeted drug delivery systems.

Bypassing adverse injection reactions to nanoparticles through shape modification and attachment to erythrocytes.

Intravenously injected nanopharmaceuticals, including PEGylated nanoparticles, induce adverse cardiopulmonary reactions in sensitive human subjects, and these reactions are highly reproducible in pigs. Although the underlying mechanisms are poorly understood, roles for both the complement system and reactive macrophages have been implicated. Here, we show the dominance and importance of robust pulmonary intravascular macrophage clearance of nanoparticles in mediating adverse cardiopulmonary distress in pigs irrespective of complement activation. Specifically, we show that delaying particle recognition by macrophages within the first few minutes of injection overcomes adverse reactions in pigs using two independent approaches. First, we changed the particle geometry from a spherical shape (which triggers cardiopulmonary distress) to either rod- or disk-shape morphology. Second, we physically adhered spheres to the surface of erythrocytes. These strategies, which are distinct from commonly leveraged stealth engineering approaches such as nanoparticle surface functionalization with poly(ethylene glycol) and/or immunological modulators, prevent robust macrophage recognition, resulting in the reduction or mitigation of adverse cardiopulmonary distress associated with nanopharmaceutical administration.