Recommendations and good practices for dissolved organic carbon (DOC) analyses at low concentrations.

Numerous protocols for dissolved organic carbon (DOC) measurements on natural water are used in the literature. An ISO protocol for the determination of DOC exists since 2018, but it is certified for DOC values ≥ 1 mg L-1, while many publications report DOC values much lower. In addition, this ISO protocol does not include indications on vials cleaning, filtering material, and type of caps and septa to be used. The purpose of this study was to evaluate protocols for measurements of low DOC concentrations (≤ 1 mg L-1). The effect of the sample container, type of septum, filtration material, nature of acid used for storage, and matrix effects on DOC concentration were evaluated.•The use of glass vials decontaminated at 450 °C or 500 °C for at least 1 h, 0.45 µm hydrophilic polytetrafluoroethylene (PTFE) membranes previously rinsed with 20 mL ultra-pure water and HCl acidification gives the lowest DOC contamination,•Sulfides (ΣH2S), sodium (Na+) or calcium (Ca2+) do not induce high matrix effect for the analysis (≤ 10%),•At low DOC concentrations (≤ 1 mg L-1), the use of pierced PTFE septa with acidified samples induce slight DOC contamination after storage at 4 °C, and dramatic contamination after storage at -18 °C.

Coupling metal stable isotope compositions and X-ray absorption spectroscopy to study metal pathways in soil-plant systems: a mini review.

Excess and limited trace metal contents in soils and plants can limit crop yields and pose a risk for the environment and human health. This mini-review reports on the emerging approach of combining X-ray absorption spectroscopy (XAS) with isotope analyses to improve the understanding of metal speciation and dynamics in soil-plant systems. In soils and their components, shifts in isotope compositions could be in some cases linked to changing metal speciation and thereby provide information on processes that control the phytoavailability of metals. In plants, the XAS-isotope approach has potential to improve the understanding of how complex interactions of metal speciation, redox processes, and membrane transport control metal uptake and translocation to edible plant parts. Yet, the XAS-isotope approach proves to be in a rather exploratory phase, and many research gaps remain. Such limitations can be overcome by methodological improvements and combining the approach with molecular biology and modelling approaches.

From soil to cacao bean: Unravelling the pathways of cadmium translocation in a high Cd accumulating cultivar of Theobroma cacao L.

The research on strategies to reduce cadmium (Cd) accumulation in cacao beans is currently limited by a lack of understanding of the Cd transfer pathways within the cacao tree. Here, we elucidated the transfer of Cd from soil to the nib (seed) in a high Cd accumulating cacao cultivar. Here, we elucidated the transfer of Cd from soil to the nib (seed) in a high Cd accumulating cacao cultivar through Cd stable isotope fractionation, speciation (X-Ray Absorption Spectroscopy), and localization (Laser Ablation Inductively Coupled Plasma Mass Spectrometry). The plant Cd concentrations were 10-28 higher than the topsoil Cd concentrations and increased as placenta< nib< testa< pod husk< root< leaf< branch. The retention of Cd in the roots was low. Light Cd isotopes were retained in the roots whilst heavier Cd isotopes were transported to the shoots (Δ 114/110 Cd shoot-root = 0.27 ± 0.02 ‰ (weighted average ± standard deviation)). Leaf Cd isotopes were heavier than Cd in the branches (Δ 114/110 Cd IF3 leaves-branch = 0.18 ± 0.01 ‰), confirming typical trends observed in annual crops. Nibs and branches were statistically not distinguishable (Δ 114/110 Cd nib-branch = -0.08‰ ± 0.06 ‰), contrary to the leaves and nibs (Δ 114/110 Cd nib-IF3 leaves = -0.25‰ ± 0.05 ‰). These isotope fractionation patterns alluded to a more direct transfer from branches to nibs rather than from leaves to nibs. The largest fraction (57%) of total plant Cd was present in the branches where it was primarily bound to carboxyl-ligands (60-100%) and mainly localized in the phloem rays and phelloderm of the bark. Cadmium in the nibs was mainly bound to oxygen ligands (60-90%), with phytate as the most plausible ligand. The weight of evidence suggested that Cd was transferred like other nutrients from root to shoot and accumulated in the phloem rays and phelloderm of the branches to reduce the transfer to foliage. Finally, the data indicated that the main contribution of nib Cd was from the phloem tissues of the branch rather than from leaf remobilization. This study extended the limited knowledge on Cd accumulation in perennial, woody crops and revealed that the Cd pathways in cacao are markedly different than in annual crops.

Physico-Chemical Transformation and Toxicity of Multi-Shell InP Quantum Dots under Simulated Sunlight Irradiation, in an Environmentally Realistic Scenario.

Quantum dots (QDs) are widely used in optoelectronics, lighting, and photovoltaics leading to their potential release into the environment. The most promising alternative to the highly toxic cadmium selenide (CdSe) QDs are indium phosphide (InP) QDs, which show reduced toxicity and comparable optical and electronic properties. QD degradation leads to the release of toxic metal ions into the environment. Coating the QD core with robust shell(s) composed of another semi-conductor material enhances their properties and protects the QD from degradation. We recently developed double-shelled InP QDs, which proved to be less toxic than single-shell QDs. In the present study, we confirm their reduced cytotoxicity, with an LC50 at 77 nM for pristine gradient shell QDs and >100 nM for pristine thin and thick shell QDs. We also confirm that these three QDs, when exposed to simulated sunlight, show greater cytotoxicity compared to pristine ones, with LC50 ranging from 15 to 23 nM. Using a combination of spectroscopic and microscopic techniques, we characterize the degradation kinetics and transformation products of single- and double-shell QDs, when exposed to solar light at high temperature, simulating environmental conditions. Non-toxic pristine QDs degrade to form toxic In−phosphate, In−carboxylate, Zn−phosphate, and oxidized Se, all of which precipitate as heterogeneous deposits. Comparison of their degradation kinetics highlights that the QDs bearing the thickest ZnS outer shell are, as expected, the most resistant to photodegradation among the three tested QDs, as gradient shell, thin shell, and thick shell QDs lose their optical properties in less than 15 min, 60 min, and more than 90 min, respectively. They exhibit the highest photoluminescence efficiency, i.e., the best functionality, with a photoluminescence quantum yield in aqueous solution of 24%, as compared to 18% for the gradient shell and thin shell QDs. Therefore, they can be considered as safer-by-design QDs.

Chemical status of zinc in plant phytoliths: Impact of burning and (paleo)environmental implications.

Phytoliths are microscopic structures made of amorphous opal (opal-A), an amorphous hydrated silica, dispersed within plant tissues and persisting after the decay of the plant. Silicon is known to alleviate metal toxicity in plants, but the role of phytoliths in metal sequestration and detoxification is unclear. Dry ashing, the most common protocol for phytolith extraction, was previously shown to lead to sequestration of metals by the phytoliths; however, the mechanisms of this process remained elusive. The purpose of this study was to evaluate whether the association between metals and phytoliths results from dry ashing or pre-exists in plant tissues. Thus, we compared phytoliths extracted by dry ashing at 700 °C and plant leaves before and after dry ashing. A combination of ICP-MS, XRD, SEM-EDX and Zn-K-edge EXAFS spectroscopy was used to assess elemental concentrations, morphology and crystallography of silica, and chemical status of Zn. Results demonstrated a phase transition from amorphous opal (opal-A) to opal-CT and α-cristobalite, and the sequestration of metal in phytoliths during dry ashing. For Zn, Mn and Pb, a linear relationship was found between the concentration in phytoliths and in leaves. In the phytoliths, Zn was sequestered in silica in tetrahedral configuration. We hypothesize that this association results form a solid-state reaction during ashing, involving a redistribution of Zn from the organic material to the silica, possibly promoted by the release of structural water from amorphous opal throughout the heating procedure. This study improves our understanding of the impact of high temperature treatments on plant biomass and phytoliths. It suggests that Zn toxicity alleviation in plants by silicon does not rely on its sequestration by phytoliths. In natural settings, wild fire events and biomass burning may lead to metal sequestration in low-soluble form, which should be considered in modeling of biogeochemical cycles and in paleoenvironmental studies.

Distinguishing Engineered TiO2 Nanomaterials from Natural Ti Nanomaterials in Soil Using spICP-TOFMS and Machine Learning.

Identifying engineered nanomaterials (ENMs) made from earth-abundant elements in soils is difficult because soil also contains natural nanomaterials (NNMs) containing similar elements. Here, machine learning models using elemental fingerprints and mass distributions of three TiO2 ENMs and Ti-based NNMs recovered from three natural soils measured by single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOFMS) was used to identify TiO2 ENMs in soil. Synthesized TiO2 ENMs were unassociated with other elements (>98%), while 40% of Ti-based ENM particles recovered from wastewater sludge had distinguishable elemental associations. All Ti-based NNMs extracted from soil had a similar chemical fingerprint despite the soils being from different regions, and >60% of Ti-containing NNMs had no measurable associated elements. A machine learning model best distinguished NNMs and ENMs when differences in Ti-mass distribution existed between them. A trained LR model could classify 100 nm TiO2 ENMs at concentrations of 150 mg kg-1 or greater. The presence of TiO2 ENMs in soil could be confirmed using this approach for most ENM-soil combinations, but the absence of a unique chemical fingerprint in a large fraction of both TiO2 ENMs and Ti-NNMs increases model uncertainty and hinders accurate quantification.

Assessing implications of nanoplastics exposure to plants with advanced nanometrology techniques.

Despite the increasing attention given to the impacts of nanoplastics in terrestrial environments, there is limited data about the effects on plants, and the quantitative information on uptake. In the present study, wheat plants grown in hydroponics were exposed to Pd-doped nanoplastics. This allowed us to quantify nanoplastics uptake and translocation to the shoots. Visualization of nanoplastics in roots was performed with synchrotron micro X-ray fluorescence (µXRF). Nanoplastics accumulated on the root epidermis, especially at the root tip and in root maturation zones. A close relationship between plant roots, rhizodeposits and nanoplastics behaviour was shown. Reinforcement of the cell wall in roots was evidenced using Fourier transform infrared spectroscopy (FTIR) and synchrotron-computed microtomography (µCT). Synchrotron-computed nanotomography (nanoCT) evidenced the presence of globular structures but they could not be identified as nanoplastics since they were observed both in the control and treated roots. By utilizing the inorganic tracer in the doped-nanoplastics, this study paves the road for elucidating interactions in more complex systems by using an integrative approach combining classical phytotoxicity markers with advanced nanometrology techniques.

Changes of Cadmium Storage Forms and Isotope Ratios in Rice During Grain Filling.

Rice poses a major source of the toxic contaminant cadmium (Cd) for humans. Here, we elucidated the role of Cd storage forms (i.e., the chemical Cd speciation) on the dynamics of Cd within rice. In a pot trial, we grew rice on a Cd-contaminated soil in upland conditions and sampled roots and shoots parts at flowering and maturity. Cd concentrations, isotope ratios, Cd speciation (X-ray absorption spectroscopy), and micronutrient concentrations were analyzed. During grain filling, Cd and preferentially light Cd isotopes were strongly retained in roots where the Cd storage form did not change (Cd bound to thiols, Cd-S = 100%). In the same period, no net change of Cd mass occurred in roots and shoots, and the shoots became enriched in heavy isotopes (Δ114/110Cd maturity-flowering = 0.14 ± 0.04‰). These results are consistent with a sequestration of Cd in root vacuoles that includes strong binding of Cd to thiol containing ligands that favor light isotopes, with a small fraction of Cd strongly enriched in heavy isotopes being transferred to shoots during grain filling. The Cd speciation in the shoots changed from predominantly Cd-S (72%) to Cd bound to O ligands (Cd-O, 80%) during grain filling. Cd-O may represent Cd binding to organic acids in vacuoles and/or binding to cell walls in the apoplast. Despite this change of ligands, which was attributed to plant senescence, Cd was largely immobile in the shoots since only 0.77% of Cd in the shoots were transferred into the grains. Thus, both storage forms (Cd-S and Cd-O) contributed to the retention of Cd in the straw. Cd was mainly bound to S in nodes I and grains (Cd-S > 84%), and these organs were strongly enriched in heavy isotopes compared to straw (Δ114/110Cd grains/nodes- straw = 0.66-0.72‰) and flag leaves (Δ114/110Cd grains/nodes-flag leaves = 0.49-0.52‰). Hence, xylem to phloem transfer in the node favors heavy isotopes, and the Cd-S form may persist during the transfer of Cd from node to grain. This study highlights the importance of Cd storage forms during its journey to grain and potentially into the food chain.

A Critical Review on the Impacts of Nanoplastics and Microplastics on Aquatic and Terrestrial Photosynthetic Organisms.

Microplastic and nanoplastic contamination is widespread and affects aquatic and terrestrial ecosystems. Photosynthetic organisms are present in both media, they are primary producers, sink for CO2 , and they represent a major point of entry in the food chain. Here, the current knowledge on the fate and impacts of microplastics and nanoplastics in interaction with these organisms is reviewed. As a general trend, plastic characteristics (smaller size and positive charge) play a crucial role in their toxicity toward photosynthetic organisms. Plastic leachates (containing additives) also represent a major source of toxicity, and some harmful compounds such as phthalate esters are shown to accumulate in plants and generate a risk for the consumers. Adsorption of plastic particles is evidenced for each type of photosynthetic organism, and uptake and translocation in terrestrial plants is evidenced for nanoplastics, leading to concerns for trophic chain contamination. The available techniques for the detection of microplastics and nanoplastics and their secondary products in biological samples and media are also listed. Finally, the current gaps of knowledge, specific challenges, and future research directions are also discussed.

In Situ Formation of Silver Nanoparticles (Ag-NPs) onto Textile Fibers.

Silver nanoparticles (Ag-NPs) adhered/inserted on textile fibers have an effective antimicrobial role. However, their release due to low adherence and their fate in the natural settings have been questioned in terms of toxicity level. In order to overcome this recurrent problem of adherence, the in situ formation of Ag-NPs in five textile fibers (cotton (untreated and chemically bleached), sheep's wool, polyamide, and polyester) was assessed. Herein, the fibers were first immersed in a silver ion solution (1 g/L of AgNO3) for ion saturation at room T for 24 h followed by draining fibers and their reimmersion this time in a strong chemical reducing solution (0.25 g/L of NaBH4) at room T for 24 h. This latter step leads to the in situ formation of Ag-NPs where size (5 nm < size < 50 nm), surface covering concentration, and aggregation degree depend on the textile fiber kind as deduced from FESEM images. This simple lab chemical method allows instantaneous in situ formation of Ag-NPs onto fibers without the requirement of additional thermal treatment. Moreover, for natural fibers, the formation of Ag-NPs inside of them is also expected as confirmed from FESEM images in cotton cross sections. In complement, all textile fibers containing Ag-NPs (sheep's wool 10 mg/g > untreated cotton 2.3 mg/g > bleached cotton 1 mg/g > polyamide 0.62 mg/g > polyester 0.28 mg/g) were submitted to interact with strong oxidants in an aqueous media (7.5% v/v of H2O2, 0.5 and 0.05 M of HNO3 and ultrapure water as the control) using flow-through reactor experiments. Here, breakthrough curves reveal that the oxidative dissolution rate (given in mol/g min) of adhered Ag-NPs (ionic release) depends strongly on fiber nature, and nature and concentration of oxidant solution. In summary, this fundamental study suggests that Ag-NPs may be successfully adhered/inserted in natural fibers (wool and cotton) in a safety-design perspective with performant biocide properties as confirmed by using Bacillus subtilis.

Cadmium transfer in contaminated soil-rice systems: Insights from solid-state speciation analysis and stable isotope fractionation.

Initial Cadmium (Cd) isotope fractionation studies in cereals ascribed the retention of Cd and its light isotopes to the binding of Cd to sulfur (S). To better understand the relation of Cd binding to S and Cd isotope fractionation in soils and plants, we combined isotope and XAS speciation analyses in soil-rice systems that were rich in Cd and S. The systems included distinct water management (flooded vs. non-flooded) and rice accessions with (excluder) and without (non-excluder) functional membrane transporter OsHMA3 that transports Cd into root vacuoles. Initially, 13% of Cd in the soil was bound to S. Through soil flooding, the proportion of Cd bound to S increased to 100%. Soil flooding enriched the rice plants towards heavy isotopes (δ114/110Cd = -0.37 to -0.39%) compared to the plants that grew on non-flooded soils (δ114/110Cd = -0.45 to -0.56%) suggesting that preferentially light Cd isotopes precipitated into Cd sulfides. Isotope compositions in CaCl2 root extracts indicated that the root surface contributed to the isotope shift between soil and plant during soil flooding. In rice roots, Cd was fully bound to S in all treatments. The roots in the excluder rice strongly retained Cd and its lights isotopes while heavy isotopes were transported to the shoots (Δ114/110Cdshoot-root 0.16-0.19‰). The non-excluder rice accumulated Cd in shoots and the apparent difference in isotope composition between roots and shoots was smaller than that of the excluder rice (Δ114/110Cdshoot-root -0.02 to 0.08‰). We ascribe the retention of light Cd isotopes in the roots of the excluder rice to the membrane transport of Cd by OsHMA3 and/or chelating Cd-S complexes in the vacuole. Cd-S was the major binding form in flooded soils and rice roots and partly contributed to the immobilization of Cd and its light isotopes in soil-rice systems.

Extreme Arsenic Bioaccumulation Factor Variability in Lake Titicaca, Bolivia.

Latin America, like other areas in the world, is faced with the problem of high arsenic (As) background in surface and groundwater, with impacts on human health. We studied As biogeochemical cycling by periphyton in Lake Titicaca and the mine-impacted Lake Uru Uru. As concentration was measured in water, sediment, totora plants (Schoenoplectus californicus) and periphyton growing on stems, and As speciation was determined by X-ray absorption spectroscopy in bulk and EDTA-extracted periphyton. Dissolved arsenic was between 5.0 and 15 µg L-1 in Lake Titicaca and reached 78.5 µg L-1 in Lake Uru Uru. As accumulation in periphyton was highly variable. We report the highest As bioaccumulation factors ever measured (BAFsperiphyton up to 245,000) in one zone of Lake Titicaca, with As present as As(V) and monomethyl-As (MMA(V)). Non-accumulating periphyton found in the other sites presented BAFsperiphyton between 1281 and 11,962, with As present as As(III), As(V) and arsenosugars. DNA analysis evidenced several taxa possibly related to this phenomenon. Further screening of bacterial and algal isolates would be necessary to identify the organism(s) responsible for As hyperaccumulation. Impacts on the ecosystem and human health appear limited, but such organisms or consortia would be of great interest for the treatment of As contaminated water.

Assessing the impacts of sewage sludge amendment containing nano-TiO2 on tomato plants: A life cycle study.

Increasing evidence indicates the presence of engineered nanoparticles (ENPs) in sewage sludge derived from wastewater treatment. Land application of sewage sludge is, therefore, considered as an important pathway for ENP transfer to the environment. The aim of this work was to understand the effects of sewage sludge containing nano-TiO2 on plants (tomato) when used as an amendment in agricultural soil. We assessed developmental parameters for the entire plant life cycle along with metabolic and bio-macromolecule changes and titanium accumulation in plants. The results suggest that the sewage sludge amendment containing nano-TiO2 increased plant growth (142% leaf biomass, 102% fruit yield), without causing changes in biochemical responses, except for a 43% decrease in leaf tannin concentration. Changes in elemental concentrations (mainly Fe, B, P, Na, and Mn) of plant stem, leaves and, to a lesser extent fruits were observed. Fourier-transformed infrared analysis showed maximum changes in plant leaves (decrease in tannins and lignins and increase in carbohydrates) but no change in fruits. No significant Ti enrichment was detected in tomato fruits. In conclusion, we evidenced no acute toxicity to plants and no major implication for food safety after one plant life cycle exposure.

The poly-gamma-glutamate of Bacillus subtilis interacts specifically with silver nanoparticles.

For many years, silver nanoparticles, as with other antibacterial nanoparticles, have been extensively used in manufactured products. However, their fate in the environment is unclear and raises questions. We studied the fate of silver nanoparticles in the presence of bacteria under growth conditions that are similar to those found naturally in the environment (that is, bacteria in a stationary phase with low nutrient concentrations). We demonstrated that the viability and the metabolism of a gram-positive bacteria, Bacillus subtilis, exposed during the stationary phase is unaffected by 1 mg/L of silver nanoparticles. These results can be partly explained by a physical interaction of the poly-gamma-glutamate (PGA) secreted by Bacillus subtilis with the silver nanoparticles. The coating of the silver nanoparticles by the secreted PGA likely results in a loss of the bioavailability of nanoparticles and, consequently, a decrease of their biocidal effect.

Impact of a Model Soil Microorganism and of Its Secretome on the Fate of Silver Nanoparticles.

Sulfidation is a key process for silver nanoparticles released from consumer products in the environment. This study focuses on the impact of a model soil microorganism, Bacillus subtilis, on the fate of pristine and already sulfidized Ag-NPs. The nanoparticles were incubated with the initial growth medium, isolated secretome, and living bacteria, and characterized for their size and morphology, agglomeration state, structure, and Ag speciation. No Ag internalization or sorption on the cell wall was detected. A partial sulfidation, leading to an Ag-Ag2S core-shell structure, was observed in the presence of the secretome, and the rate limiting step of the reaction was the oxidation of Ag0, and it was favored near the crystal dislocations. The sulfidation was complete in the presence of the living bacteria and followed an indirect pathway. Both crystalline Ag2S and amorphous Ag2S and/or Ag-thiol were identified. At the opposite, the bacteria had no impact on Ag2S. These results suggest that microorganisms participate in the sulfidation of Ag-NPs in aerobic systems such as unsaturated soils, and thus affect the bioavailability of Ag. It is important to take these transformations into account during exposure experiments, since they drastically change the exposure conditions. Finally, the secretome of B. subtilis might be used for the green synthesis of Ag-Ag2S core-shell nanoparticles.

Fate and chemical speciation of antimony (Sb) during uptake, translocation and storage by rye grass using XANES spectroscopy.

Antimony (Sb) is a contaminant of increased prevalence in the environment, but there is little knowledge about the mechanisms of its uptake and translocation within plants. Here, we applied for the synchrotron based X-ray absorption near-edge structure (XANES) spectroscopy to analyze the speciation of Sb in roots and shoots of rye grass (Lolium perenne L. Calibra). Seedlings were grown in nutrient solutions to which either antimonite (Sb(III)), antimonate (Sb(V)) or trimethyl-Sb(V) (TMSb) were added. While exposure to Sb(III) led to around 100 times higher Sb accumulation in the roots than the other two treatments, there was no difference in total Sb in the shoots. Antimony taken up in the Sb(III) treatment was mainly found as Sb-thiol complexes (roots: >76% and shoots: 60%), suggesting detoxification reactions with compounds such as glutathione and phytochelatins. No reduction of accumulated Sb(V) was found in the roots, but half of the translocated Sb was reduced to Sb(III) in the Sb(V) treatment. Antimony accumulated in the TMSb treatment remained in the methylated form in the roots. By synchrotron based XANES spectroscopy, we were able to distinguish the major Sb compounds in plant tissue under different Sb treatments. The results help to understand the translocation and transformation of different Sb species in plants after uptake and provide information for risk assessment of plant growth in Sb contaminated soils.

Mercury speciation in Pinus nigra barks from Monte Amiata (Italy): An X-ray absorption spectroscopy study.

This study determined, by means of X-ray absorption near-edge structure (XANES) spectroscopy, the speciation of mercury (Hg) in black pine (Pinus nigra) barks from Monte Amiata, that were previously shown to contain exceptionally high (up to some mg kg-1) Hg contents because of the proximity to the former Hg mines and roasting plants. Linear fit combination (LCF) analysis of the experimental spectra compared to a large set of reference compounds showed that all spectra can be fitted by only four species: ß-HgS (metacinnabar), Hg-cysteine, Hg bound to tannic acid, and Hg0. The first two are more widespread, whereas the last two occur in one sample only; the contribution of organic species is higher in deeper layers of barks than in the outermost ones. We interpret these results to suggest that, during interaction of barks with airborne Hg, the metal is initially mechanically captured at the bark surface as particulate, or physically adsorbed as gaseous species, but eventually a stable chemical bond is established with organic ligands of the substrate. As a consequence, we suggest that deep bark Hg may be a good proxy for long term time-integrated exposure, while surface bark Hg is more important for recording short term events near Hg point sources.

Silver Nanoparticles and Wheat Roots: A Complex Interplay.

Agricultural soils are major sinks of silver nanoparticles in the environment, and crops are directly exposed to these emerging contaminants. A clear picture of their chemical transformations, uptake and transport mechanisms, and phytotoxic impacts is still lacking. In this work, wheat plants were exposed to pristine metallic (Ag-NPs) and sulfidized (Ag2S-NPs) silver nanoparticles and ionic Ag. Data on Ag distribution and speciation, phytotoxicity markers, and gene expression were studied. A multi-technique and multi-scale approach was applied, combining innovating tools at both the laboratory and synchrotron. Various chemical transformations were observed on the epidermis and inside roots, even for Ag2S-NPs, leading to an exposure to multiple Ag forms, which likely evolve over time. Genes involved in various functions including oxidative stress, defense against pathogens, and metal homeostasis were impacted in different ways depending upon the Ag source. This study illustrates the complexity of the toxicity pattern for plants exposed to Ag-NPs, the necessity of monitoring several markers to accurately evaluate the toxicity, and the interest of interpreting the toxicity pattern in light of the distribution and speciation of Ag.

Practical review on the use of synchrotron based micro- and nano- X-ray fluorescence mapping and X-ray absorption spectroscopy to investigate the interactions between plants and engineered nanomaterials.

The increased use of engineered nanomaterials (ENMs) in commercial products and the continuous development of novel applications, is leading to increased intentional and unintentional release of ENMs into the environment with potential negative impacts. Particularly, the partition of nanoparticles (NPs) to waste water treatment plant (WWTP) sludge represents a potential threat to agricultural ecosystems where these biosolids are being applied as fertilizers. Moreover, several applications of ENMs in agriculture and soil remediation are suggested. Therefore, detailed risk assessment should be done to evaluate possible secondary negative impacts. The impact of ENMS on plants as central component of ecosystems and worldwide food supply is of primary relevance. Understanding the fate and physical and chemical modifications of NPs in plants and their possible transfer into food chains requires specialized analytical techniques. Due to the importance of both chemical and physical factors to consider for a better understanding of ENMs behavior in complex matrices, these materials can be considered a new type of analyte. An ideal technique should require minimal sample preparation, be non-destructive, and offer the best balance between sensitivity, chemical specificity, and spatial resolution. Synchrotron radiation (SR) techniques are particularly adapted to investigate localization and speciation of ENMs in plants. SR X-ray fluorescence mapping (SR-XFM) offers multi-elemental detection with lateral resolution down to the tens of nm, in combination with spatially resolved X-ray absorption spectroscopy (XAS) speciation. This review will focus on important methodological aspects regarding sample preparation, data acquisition and data analysis of SR-XFM/XAS to investigate interactions between plants and ENMs.