Understanding the Decomposition of Dimethyl Methyl Phosphonate on Metal-Modified TiO2(110) Surfaces Using Ensembles of Product Configurations.

The decomposition of dimethyl methyl phosphonate (DMMP), a simulant for the nerve agent sarin, was investigated on Cu4/TiO2(110) and K/Cu4/TiO2(110) surfaces using a combination of near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory calculations (DFT). Mass-selected Cu4 clusters and potassium (K) atoms were deposited onto TiO2(110) as a metal catalyst and alkali promoter to improve the reactivity and recyclability of the TiO2 surface after exposure to DMMP. Surface reaction products resulting from decomposition of DMMP were probed by NAP-XPS measurements of phosphorus (P) 2p and carbon 1s core-level spectra. The Cu4/TiO2(110) surface is found to be very active for DMMP decomposition with highly reduced P-species observed even at room temperature (RT). The codeposition of K atoms and Cu4 clusters further improves the reactivity with no intact DMMP detectable. Temperature-dependent measurements show that the presence of K atoms promotes the removal of residual P-species at temperatures > 600 K. Detailed DFT calculations were performed to determine the surface structures and energetically accessible pathways for DMMP decomposition on Cu4/TiO2(110) and K/Cu4/TiO2(110) surfaces. The calculations show that DMMP and P-containing reaction products preferentially bind to the TiO2 surface, while the molecular fragments, i.e., methoxy and methyl, bind to both the Cu4 clusters and TiO2. The Cu4 clusters make the P-O, O-C, and P-C bond cleavages of DMMP markedly more exothermic. The Cu4 clusters are highly fluxional with atomic structures that depend on the configuration of fragments bound to them. Finally, the manifold of P 2p chemical shifts calculated for a large number of energetically favorable configurations of decomposition products is in good agreement with the observed XPS spectra and provides an alternative way of interpreting incompletely resolved core-level spectra using an ensemble of observed structures.

Stabilizing *CO2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO2 Reduction.

CO2 electroreduction (CO2 R) operating in acidic media circumvents the problems of carbonate formation and CO2 crossover in neutral/alkaline electrolyzers. Alkali cations have been universally recognized as indispensable components for acidic CO2 R, while they cause the inevitable issue of salt precipitation. It is therefore desirable to realize alkali-cation-free CO2 R in pure acid. However, without alkali cations, stabilizing *CO2 intermediates by catalyst itself at the acidic interface poses as a challenge. Herein, we first demonstrate that a carbon nanotube-supported molecularly dispersed cobalt phthalocyanine (CoPc@CNT) catalyst provides the Co single-atom active site with energetically localized d states to strengthen the adsorbate-surface interactions, which stabilizes *CO2 intermediates at the acidic interface (pH=1). As a result, we realize CO2 conversion to CO in pure acid with a faradaic efficiency of 60 % at pH=2 in flow cell. Furthermore, CO2 is successfully converted in cation exchanged membrane-based electrode assembly with a faradaic efficiency of 73 %. For CoPc@CNT, acidic conditions also promote the intrinsic activity of CO2 R compared to alkaline conditions, since the potential-limiting step, *CO2 to *COOH, is pH-dependent. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts and devices for acidic CO2 R.

H-Induced Restructuring on Cu(111) Triggers CO Electroreduction in an Acidic Electrolyte.

In acidic conditions, the electroreduction of CO or CO2 (noted CO(2)RR) on metal surfaces is conventionally hindered by intense competition with the hydrogen evolution reaction (HER). In this study, we present first-principles calculations of a mechanism wherein the formation of H-induced Cu adatoms on Cu(111) serves as a pivotal trigger for CORR in acidic environments. Through an analysis of the grand canonical surface state population, we elucidate that these newly formed adatoms create an array of active sites essential for both CO adsorption and subsequent reduction. Our ensemble-based kinetic models unveil the role of adatoms, enhancing the HER while simultaneously initiating CORR. Notably, the cumulative activity of the HER and CORR is contingent upon the combination of various surface states, with their individual contributions varying based on the electrode potential and pH. The interplay between surface state dynamics and electrochemical activity sheds new light on the potential-dependent nature of the active site and reaction kinetics governing CORR on Cu(111) in acidic media.

Establishing reaction networks in the 16-electron sulfur reduction reaction.

The sulfur reduction reaction (SRR) plays a central role in high-capacity lithium sulfur (Li-S) batteries. The SRR involves an intricate, 16-electron conversion process featuring multiple lithium polysulfide intermediates and reaction branches1-3. Establishing the complex reaction network is essential for rational tailoring of the SRR for improved Li-S batteries, but represents a daunting challenge4-6. Herein we systematically investigate the electrocatalytic SRR to decipher its network using the nitrogen, sulfur, dual-doped holey graphene framework as a model electrode to understand the role of electrocatalysts in acceleration of conversion kinetics. Combining cyclic voltammetry, in situ Raman spectroscopy and density functional theory calculations, we identify and directly profile the key intermediates (S8, Li2S8, Li2S6, Li2S4 and Li2S) at varying potentials and elucidate their conversion pathways. Li2S4 and Li2S6 were predominantly observed, in which Li2S4 represents the key electrochemical intermediate dictating the overall SRR kinetics. Li2S6, generated (consumed) through a comproportionation (disproportionation) reaction, does not directly participate in electrochemical reactions but significantly contributes to the polysulfide shuttling process. We found that the nitrogen, sulfur dual-doped holey graphene framework catalyst could help accelerate polysulfide conversion kinetics, leading to faster depletion of soluble lithium polysulfides at higher potential and hence mitigating the polysulfide shuttling effect and boosting output potential. These results highlight the electrocatalytic approach as a promising strategy for tackling the fundamental challenges regarding Li-S batteries.

Tuning the Hydrogenation Selectivity of an Unsaturated Aldehyde via Single-Atom Alloy Catalysts.

Selective hydrogenation of α,ß-unsaturated aldehydes to produce unsaturated alcohols remains a challenge in catalysis. Here, we explore, on the basis of first-principles simulations, single-atom alloy (SAA) catalysts on copper as a class of catalytic materials to enhance the selectivity for C═O bond hydrogenation in unsaturated aldehydes by controlling the binding strength of the C═C and C═O bonds. We show that on SAA of early transition metals such as Ti, Zr, and Hf, the C═O binding mode of acrolein is favored but the strong binding renders subsequent hydrogenation and desorption impossible. On SAA of late-transition metals, on the other hand, the C═C binding mode is favored and C═C bond hydrogenation follows, resulting in the production of undesired saturated aldehydes. Mid-transition metals (Cr and Mn) in Cu(111) appear as the optimal systems, since they favor acrolein adsorption via the C═O bond but with a moderate binding strength, compatible with catalysis. Additionally, acrolein migration from the C═O to the C═C binding mode, which would open the low energy path for C═C bond hydrogenation, is prevented by a large barrier for this process. SAA of Cr in Cu appears as an optimal candidate, and kinetic simulations show that the selectivity for propenol formation is controlled by preventing the acrolein migration from the more stable C═O to the less stable C═C binding mode and subsequent H-migration and by the formation of the O-H bond from the monohydrogenated intermediate. Dilute alloy catalysts therefore enable tuning the binding strength of intermediates and transition states, opening control of catalytic activity and selectivity.

Nature of Zirconia on a Copper Inverse Catalyst Under CO2 Hydrogenation Conditions.

The growing concern over the escalating levels of anthropogenic CO2 emissions necessitates effective strategies for its conversion to valuable chemicals and fuels. In this research, we embark on a comprehensive investigation of the nature of zirconia on a copper inverse catalyst under the conditions of CO2 hydrogenation to methanol. We employ density functional theory calculations in combination with the Grand Canonical Basin Hopping method, enabling an exploration of the free energy surface including a variable amount of adsorbates within the relevant reaction conditions. Our focus centers on a model three-atom Zr cluster on a Cu(111) surface decorated with various OH, O, and formate ligands, noted Zr3Ox (OH)y (HCOO)z/Cu(111), revealing major changes in the active site induced by various reaction parameters such as the gas pressure, temperature, conversion levels, and CO2/H2 feed ratios. Through our analysis, we have unveiled insights into the dynamic behavior of the catalyst. Specifically, under reaction conditions, we observe a large number of composition and structures with similar free energy for the catalyst, with respect to changing the type, number, and binding sites of adsorbates, suggesting that the active site should be regarded as a statistical ensemble of diverse structures that interconvert.

Elucidating the active phases of CoOx films on Au(111) in the CO oxidation reaction.

Noble metals supported on reducible oxides, like CoOx and TiOx, exhibit superior activity in many chemical reactions, but the origin of the increased activity is not well understood. To answer this question we studied thin films of CoOx supported on an Au(111) single crystal surface as a model for the CO oxidation reaction. We show that three reaction regimes exist in response to chemical and topographic restructuring of the CoOx catalyst as a function of reactant gas phase CO/O2 stoichiometry and temperature. Under oxygen-lean conditions and moderate temperatures (≤150 °C), partially oxidized films (CoOx<1) containing Co0 were found to be efficient catalysts. In contrast, stoichiometric CoO films containing only Co2+ form carbonates in the presence of CO that poison the reaction below 300 °C. Under oxygen-rich conditions a more oxidized catalyst phase (CoOx>1) forms containing Co3+ species that are effective in a wide temperature range. Resonant photoemission spectroscopy (ResPES) revealed the unique role of Co3+ sites in catalyzing the CO oxidation. Density function theory (DFT) calculations provided deeper insights into the pathway and free energy barriers for the reactions on these oxide phases. These findings in this work highlight the versatility of catalysts and their evolution to form different active phases, both topological and chemically, in response to reaction conditions exposing a new paradigm in the catalyst structure during operation.

Toward more accurate surface properties of ceria using many-body perturbation theory.

Despite the wide applications, the ab initio modeling of the ceria based catalyst is challenging. The partial occupation in the 4f orbitals creates a fundamental challenge for commonly used density functional theory (DFT) methods, including semilocal functionals with Hubbard U correction to force localization and hybrid functionals. In this work, we benchmark the random phase approximation (RPA) for ceria surface properties, including surface energy and hydrogenation energy, compared to the results utilizing the DFT + U approach or hybrid functionals. We show that, for the latter approaches, different surface properties require opposite directions of parameter tuning. This forms a dilemma for the parameter based DFT methods, as the improvement of a certain property by tuning parameters will inevitably lead to the worsening of other properties. Our results suggest that the parameter-free many-body perturbation theory methods exemplified by RPA are a promising strategy to escape the dilemma and provide highly accurate descriptions, which will allow us to better understand the catalytic reactions in ceria related systems.

Electrocatalytic Hydrogen Evolution at Full Atomic Utilization over ITO-Supported Sub-nano-Ptn Clusters: High, Size-Dependent Activity Controlled by Fluxional Pt Hydride Species.

A combination of density functional theory (DFT) and experiments with atomically size-selected Ptn clusters deposited on indium-tin oxide (ITO) electrodes was used to examine the effects of applied potential and Ptn size on the electrocatalytic activity of Ptn (n = 1, 4, 7, and 8) for the hydrogen evolution reaction (HER). Activity is found to be negligible for isolated Pt atoms on ITO, increasing rapidly with Ptn size such that Pt7/ITO and Pt8/ITO have roughly double the activity per Pt atom compared to atoms in the surface layer of polycrystalline Pt. Both the DFT and experiment find that hydrogen under-potential deposition (Hupd) results in Ptn/ITO (n = 4, 7, and 8) adsorbing ∼2H atoms/Pt atom at the HER threshold potential, equal to ca. double the Hupd observed for Pt bulk or nanoparticles. The cluster catalysts under electrocatalytic conditions are hence best described as a Pt hydride compound, significantly departing from a metallic Pt cluster. The exception is Pt1/ITO, where H adsorption at the HER threshold potential is energetically unfavorable. The theory combines global optimization with grand canonical approaches for the influence of potential, uncovering the fact that several metastable structures contribute to the HER, changing with the applied potential. It is hence critical to include reactions of the ensemble of energetically accessible PtnHx/ITO structures to correctly predict the activity vs Ptn size and applied potential. For the small clusters, spillover of Hads from the clusters to the ITO support is significant, resulting in a competing channel for loss of Hads, particularly at slow potential scan rates.

Hydrogen Evolution on Electrode-Supported Ptn Clusters: Ensemble of Hydride States Governs the Size Dependent Reactivity.

We report the size-dependent activity and stability of supported Pt1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with size-dependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (≈2 H/Pt). An ensemble-based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. The stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential- and adsorbate-coverage-dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.

Elucidation of the Active Site for the Oxygen Evolution Reaction on a Single Pt Atom Supported on Indium Tin Oxide.

Single-atom catalysts (SACs) have attracted attention for their high catalytic activity and selectivity, but the nature of their active sites under realistic reaction conditions, involving various ligands, is not well-understood. In this study, we use density functional theory calculations and grand canonical basin hopping to theoretically investigate the active site for the oxygen evolution reaction (OER) on a single Pt atom supported on indium tin oxide, including the influence of the electrochemical potential. We show that the ligands on the Pt atom change from Pt-OH in the absence of electrochemical potential to PtO(OH)4 in electrochemical conditions. This change of the chemical state of Pt is associated with a decrease of 0.3 V for the OER overpotential. This highlights the importance of accurately identifying the nature of the active site under reaction conditions and the impact of adsorbates on the electrocatalytic activity. This theoretical investigation enhances our understanding of SACs for the OER.

Restructuring and Activation of Cu(111) under Electrocatalytic Reduction Conditions.

The dynamic restructuring of Cu surfaces in electroreduction conditions is of fundamental interest in electrocatalysis. We decode the structural dynamics of a Cu(111) electrode under reduction conditions by joint first-principles calculations and operando electrochemical scanning tunneling microscopy (ECSTM) experiments. Combining global optimization and grand canonical density functional theory, we unravel the potential- and pH-dependent restructuring of Cu(111) in acidic electrolyte. At reductive potential, Cu(111) is covered by a high density of H atoms and, below a threshold potential, Cu adatoms are formed on the surface in a (4×4) superstructure, a restructuring unfavorable in vacuum. The strong H adsorption is the driving force for the restructuring, itself induced by the electrode potential. On the restructured surface, barriers for hydrogen evolution reaction steps are low. Restructuring in electroreduction conditions creates highly active Cu adatom sites not present on Cu(111).

Electrochemical Oxidation of Methane to Methanol on Electrodeposited Transition Metal Oxides.

Electrochemical partial oxidation of methane to methanol is a promising approach to the transformation of stranded methane resources into a high-value, easy-to-transport fuel or chemical. Transition metal oxides are potential electrocatalysts for this transformation. However, a comprehensive and systematic study of the dependence of methane activation rates and methanol selectivity on catalyst morphology and experimental operating parameters has not been realized. Here, we describe an electrochemical method for the deposition of a family of thin-film transition metal (oxy)hydroxides as catalysts for the partial oxidation of methane. CoOx, NiOx, MnOx, and CuOx are discovered to be active for the partial oxidation of methane to methanol. Taking CoOx as a prototypical methane partial oxidation electrocatalyst, we systematically study the dependence of activity and methanol selectivity on catalyst film thickness, overpotential, temperature, and electrochemical cell hydrodynamics. Optimal conditions of low catalyst film thickness, intermediate overpotentials, intermediate temperatures, and fast methanol transport are identified to favor methanol selectivity. Through a combination of control experiments and DFT calculations, we show that the oxidized form of the as-deposited (oxy)hydroxide catalyst films are active for the thermal oxidation of methane to methanol even without the application of bias potential, demonstrating that high valence transition metal oxides are intrinsically active for the activation and oxidation of methane to methanol at ambient temperatures. Calculations uncover that electrocatalytic oxidation enables reaching an optimum potential window in which methane activation forming methanol and methanol desorption are both thermodynamically favorable, methanol desorption being favored by competitive adsorption with hydroxide anion.

Bifunctional Ultrathin RhRu0.5 -Alloy Nanowire Electrocatalysts for Hydrazine-Assisted Water Splitting.

Hydrazine-assisted water electrolysis offers a feasible path for low-voltage green hydrogen production. Herein, the design and synthesis of ultrathin RhRu0.5 -alloy wavy nanowires as bifunctional electrocatalysts for both the anodic hydrazine oxidation reaction (HzOR) and the cathodic hydrogen evolution reaction (HER) is reported. It is shown that the RhRu0.5 -alloy wavy nanowires can achieve complete electrooxidation of hydrazine with a low overpotential and high mass activity, as well as improved performance for the HER. The resulting RhRu0.5 bifunctional electrocatalysts enable, high performance hydrazine-assisted water electrolysis delivering a current density of 100 mA cm-2 at an ultralow cell voltage of 54 mV and a high current density of 853 mA cm-2 at a cell voltage of 0.6 V. The RhRu0.5  electrocatalysts further demonstrate a stable operation at a high current density of 100 mA cm-2 for 80 hours of testing period with little irreversible degradation. The overall performance greatly exceeds that of the previously reported hydrazine-assisted water electrolyzers, offering a pathway for efficiently converting hazardous hydrazine into molecular hydrogen.

Achieving Ultra-High Selectivity to Hydrogen Production from Formic Acid on Pd-Ag Alloys.

Palladium-silver-based alloy catalysts have a great potential for CO-free hydrogen production from formic acid for fuel cell applications. However, the structural factors affecting the selectivity of formic acid decomposition are still debated. Herein, the decomposition pathways of formic acid on Pd-Ag alloys with different atomic configurations have been investigated to identify the alloy structures yielding high H2 selectively. Several PdxAg1-x surface alloys with various compositions were generated on a Pd(111) single crystal; their atomic distribution and electronic structure were determined by a combination of infrared reflection absorption spectroscopy (IRAS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). It was established that the Ag atoms with Pd neighbors are electronically altered, and the degree of alteration correlates with the number of nearest Pd. Temperature-programmed reaction spectroscopy (TPRS) and DFT demonstrated that the electronically altered Ag domains create a new reaction pathway that selectively dehydrogenates formic acid. In contrast, Pd monomers surrounded by Ag are demonstrated to have a similar reactivity compared to pristine Pd(111), yielding CO and H2O in addition to the dehydrogenation products. However, they bind to the produced CO weaker than pristine Pd, demonstrating an enhancement in resistance to CO poisoning. This work therefore shows that surface Ag domains modified by interaction with subsurface Pd are the key active sites for selective decomposition of formic acid, while surface Pd atoms are detrimental to selectivity. Hence, the decomposition pathways can be tailored for CO-free H2 production on Pd-Ag alloy systems.

Atomic-Scale Mechanism of Platinum Catalyst Restructuring under a Pressure of Reactant Gas.

Heterogeneous catalysis is key for chemical transformations. Understanding how catalysts' active sites dynamically evolve at the atomic scale under reaction conditions is a prerequisite for accurately determining catalytic mechanisms and predictably developing catalysts. We combine in situ time-dependent scanning tunneling microscopy observations and machine-learning-accelerated first-principles atomistic simulations to uncover the mechanism of restructuring of Pt catalysts under a pressure of carbon monoxide (CO). We show that a high CO coverage at a Pt step edge triggers the formation of atomic protrusions of low-coordination Pt atoms, which then detach from the step edge to create sub-nano-islands on the terraces, where under-coordinated sites are stabilized by the CO adsorbates. The fast and accurate machine-learning potential is key to enabling the exploration of tens of thousands of configurations for the CO-covered restructuring catalyst. These studies open an avenue to achieve an atomic-scale understanding of the structural dynamics of more complex metal nanoparticle catalysts under reaction conditions.

Plasma Oxidation of Copper: Molecular Dynamics Study with Neural Network Potentials.

The formation of thin oxide films is of significant scientific and practical interest. In particular, the semiconductor industry is interested in developing a plasma atomic layer etching process to pattern copper, replacing the dual Damascene process. Using a nonthermal oxygen plasma to convert the metallic copper into copper oxide, followed by a formic acid organometallic reaction to etch the copper oxide, this process has shown great promise. However, the current process is not optimal because the plasma oxidation step is not self-limiting, hampering the degree of thickness control. In the present study, a neural network potential for the binary interaction between copper and oxygen is developed and validated against first-principles calculations. This potential covers the entire range of potential energy surfaces of metallic copper, copper oxides, atomic oxygen, and molecular oxygen. The usable kinetic energy ranges from 0 to 20 eV. Using this potential, the plasma oxidation of copper surfaces was studied with large-scale molecular dynamics at atomic resolution, with an accuracy approaching that of the first principle calculations. An amorphous layer of CuO is formed on Cu, with thicknesses reaching 2.5 nm. Plasma is found to create an intense local heating effect that rapidly dissipates across the thickness of the film. The range of this heating effect depends on the kinetic energy of the ions. A higher ion energy leads to a longer range, which sustains faster-than-thermal rates for longer periods of time for the oxide growth. Beyond the range of this agitation, the growth is expected to be limited to the thermally activated rate. High-frequency, repeated ion impacts result in a microannealing effect that leads to a quasicrystalline oxide beneath the amorphized layer. The crystalline layer slows down oxide growth. Growth rate is fitted to the temperature gradient due to ion-induced thermal agitations, to obtain an apparent activation energy of 1.0 eV. A strategy of lowering the substrate temperature and increasing plasma power is proposed as being favorable for more self-limited oxidation.

Hydrogen-Induced Restructuring of a Cu(100) Electrode in Electroreduction Conditions.

The rearrangement of Cu surfaces under electrochemical conditions is known to play a key role in the surface activation for major electrocatalytic reactions. Despite the extensive experimental insights into such rearrangements, from surface-sensitive spectroscopy and microscopy, the spatial and temporal resolution of these methods is insufficient to provide an atomistic picture of the electrochemical interface. Theoretical characterization has also been challenged by the diversity of restructuring configurations, surface stoichiometry, adsorbate configurations, and the effect of the electrode potential. Here, atomistic insight into the restructuring of the electrochemical interface is gained from first principles. Cu(100) restructuring under varying applied potentials and adsorbate coverages is studied by grand canonical density functional theory and global optimization techniques, as well as ab initio molecular dynamics and mechanistic calculations. We show that electroreduction conditions cause the formation of a shifted-row reconstruction on Cu(100), induced by hydrogen adsorption. The reconstruction is initiated at 1/6 ML H coverage, when the Cu-H bonding sufficiently weakens the Cu-Cu bonds between the top- and sublayer, and further stabilized at 1/3 ML when H adsorbates fill all the created 3-fold hollow sites. The simulated scanning tunneling microscopy (STM) images of the calculated reconstructed interfaces agree with experimental in situ STM. However, compared to the thermodynamic prediction, the onsets of reconstruction events in the experiment occur at more negative applied voltages. This is attributed to kinetic effects in restructuring, which we describe via different statistical models, to produce the potential- and pH-dependent surface stability diagram. This manuscript provides rich atomistic insight into surface restructuring in electroreduction conditions, which is required for the understanding and design of Cu-based materials for electrocatalytic processes. It also offers the methodology to study the problem of in situ electrode reconstruction.

Direct Observation of Solvent-Reaction Intermediate Interactions in Heterogeneously Catalyzed Alcohol Coupling.

The relative stability of reactive intermediates and reactants on a surface, which dictates the rate and selectivity of catalytic reactions in both gas and liquid phases, is dependent on numerous factors. One well-established example is secondary interactions, such as van der Waals interactions between the catalyst surface and the pendant group of the intermediate, which can govern reaction selectivity for coupling reactions. Herein, we directly show that interactions between adsorbed reaction intermediates and reactant molecules increase the binding energy and affects the geometrical arrangement of coadsorbed reactant/solvent molecules. Evidence for this effect is demonstrated for the oxidative coupling reaction of methanol on a single crystal gold (Au(110)) surface. The rate-limiting reaction intermediate for methanol self-coupling, methoxy, stabilizes excess adsorbed methanol, which desorbs as a result of beta-hydride decomposition of the adsorbed methoxy. Direct molecular-scale imaging by scanning tunneling microscopy, supplemented by density functional theory, revealed interactive structures formed by methoxy and coadsorbed methanol. Interactions between the methoxy intermediate and coadsorbed methanol stabilizes a hydrogen-bonded network comprising methoxy and methanol by a minimum of 0.13 eV per methanol molecule. Inclusion of such interactions between reaction intermediates and coadsorbed reactants and solvents in kinetic models is important for microkinetic analysis of the rates and selectivities of catalytic reactions in both the gas and liquid phases whenever appreciable coverages of species from the ambient phase exist.

Facilitating Hydrogen Dissociation over Dilute Nanoporous Ti-Cu Catalysts.

The dissociation of H2 is an essential elementary step in many industrial chemical transformations, typically requiring precious metals. Here, we report a hierarchical nanoporous Cu catalyst doped with small amounts of Ti (npTiCu) that increases the rate of H2-D2 exchange by approximately one order of magnitude compared to the undoped nanoporous Cu (npCu) catalyst. The promotional effect of Ti was measured via steady-state H2-D2 exchange reaction experiments under atmospheric pressure flow conditions in the temperature range of 300-573 K. Pretreatment with flowing H2 is required for stable catalytic performance, and two temperatures, 523 and 673 K, were investigated. The experimentally determined H2-D2 exchange rate is 5-7 times greater for npTiCu vs the undoped Cu material under optimized pretreatment and reaction temperatures. The H2 pretreatment leads to full reduction of Cu oxide and partial reduction of surface Ti oxide species present in the as-prepared catalyst as demonstrated using in situ ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. The apparent activation energies and pre-exponential factors measured for H2-D2 exchange are substantially different for Ti-doped vs undoped npCu catalysts. Density functional theory calculations suggest that isolated, metallic Ti atoms on the surface of the Cu host can act as the active surface sites for hydrogen recombination. The increase in the rate of exchange above that of pure Cu is caused primarily by a shift in the rate-determining step from dissociative adsorption on Cu to H/D atom recombination on Ti-doped Cu, with the corresponding decrease in activation entropy that it produces.