Mass and energy balances of sludge processing in reference and upgraded wastewater treatment plants.

This paper describes the preliminary assessment of a platform of innovative upgrading solutions aimed at improving sludge management and resource recovery in wastewater treatment plants. The effectiveness of the upgrading solutions and the impacts of their integration in model reference plants have been evaluated by means of mass and energy balances on the whole treatment plant. Attention has been also paid to the fate of nitrogen and phosphorus in sludge processing and to their recycle back to the water line. Most of the upgrading options resulted in reduced production of dewatered sludge, which decreased from 45 to 56 g SS/(PE × day) in reference plants to 14-49 g SS/(PE × day) in the upgraded ones, with reduction up to 79% when wet oxidation was applied to the whole sludge production. The innovative upgrades generally entail an increased demand of electric energy from the grid, but energy recovery from biogas allowed to minimize the net energy consumption below 10 kWh/(PE × year) in the two most efficient solutions. In all other cases the net energy consumption was in the range of -11% and +28% of the reference scenarios.

Characterisation and evaluation of the emissions from the combustion of Orimulsion-400, coal and heavy fuel oil in a thermoelectric power plant.

An experimental campaign was carried out in a thermoelectric power plant in Southern Italy in order to evaluate the emissions released during the utilisation of three different fuels, Orimulsion-400, coal and heavy fuel oil (HFO) with high content of sulphur. Macropollutant concentrations in the exhaust gases were recorded by the continuous monitoring system and the Institute on Atmospheric Pollution of the Italian National Research Council (CNR) carried out samplings and analysis of Polycyclic Aromatic Hydrocarbons (PAHs), Polychlorodibenzo-p-dioxins (PCDD) and Polychlorodibenzofurans (PCDF), halogenidric acids and metals. The pollutant concentrations, mass flows and emission factors were compared. Each fuel met the air emission limits for all the pollutants. Coal showed the highest emission levels, whilst HFO and Orimulsion were fairly similar. NOx, SO2 and particulate matter showed constant concentration for all the fuels, while Orimulsion and HFO SO2 concentrations were critical at the highest operating power. Orimulsion showed the lowest PAHs values and PCDDs and PCDFs were much lower than the limits, for all the fuels. Particular attention must be paid with vanadium and nickel during Orimulsion utilisation. For these metals mass balances were carried out.