Charge controlled interactions between DNA-modified silica nanoparticles and fluorosurfactants in microfluidic water-in-oil droplets.

Microfluidic droplets are an important tool for studying and mimicking biological systems, e.g., to examine with high throughput the interaction of biomolecular components and the functionality of natural cells, or to develop basic principles for the engineering of artificial cells. Of particular importance is the approach to generate a biomimetic membrane by supramolecular self-assembly of nanoparticle components dissolved in the aqueous phase of the droplets at the inner water/oil interface, which can serve both to mechanically reinforce the droplets and as an interaction surface for cells and other components. While this interfacial assembly driven by electrostatic interaction of surfactants is quite well developed for water/mineral oil (W/MO) systems, no approaches have yet been described to exploit this principle for water/fluorocarbon oil (W/FO) emulsion droplets. Since W/FO systems exhibit not only better compartmentalization but also gas solubility properties, which is particularly crucial for live cell encapsulation and cultivation, we report here the investigation of charged fluorosurfactants for the self-assembly of DNA-modified silica nanoparticles (SiNP-DNA) at the interface of microfluidic W/FO emulsions. To this end, an efficient multicomponent Ugi reaction was used to synthesize the novel fluorosurfactant M4SURF to study the segregation and accumulation of negatively charged SiNP-DNA at the inner interface of microfluidic droplets. Comparative measurements were performed with the negatively charged fluorosurfactant KRYTOX, which can also induce SiNP-DNA segregation in the presence of cations. The segregation dynamics is characterized and preliminary results of cell encapsulation in the SiNP-DNA functionalized droplets are shown.

DNA-Directed Assembly of a Cell-Responsive Biohybrid Interface for Cargo Release.

The development of a DNA-based cell-responsive biohybrid interface that can be used for spatially confined release of molecular cargo is reported. To this end, tailored DNA-protein conjugates are designed as gatekeepers that can be specifically cleaved by matrix metalloproteases (MMPs), which are secreted by many cancer cells. These gatekeepers can be installed by DNA hybridization on the surface of mesoporous silica nanoparticles (MSNs). The MSNs display another orthogonal DNA oligonucleotide that can be exploited for site-selective immobilization on solid glass surfaces to yield micropatterned substrates for cell adhesion. Using the human fibrosarcoma cell line HT1080 that secretes MMPs, it is demonstrated that the biohybrid surface is specifically modified by the cells to release both MSN-bound gatekeeper proteins and the encapsulated cargo peptide KLA. In view of the enormously high modularity of the system presented here, this approach promising for applications in drug delivery, tissue engineering, or other areas of nanobiotechnology is considered.

Two-Step Laser Post-Processing for the Surface Functionalization of Additively Manufactured Ti-6Al-4V Parts.

Laser powder bed fusion (LPBF) is one of the additive manufacturing methods used to build metallic parts. To achieve the design requirements, the LPBF process chain can become long and complex. This work aimed to use different laser techniques as alternatives to traditional post-processes, in order to add value and new perspectives on applications, while also simplifying the process chain. Laser polishing (LP) with a continuous wave laser was used for improving the surface quality of the parts, and an ultrashort pulse laser was applied to functionalize it. Each technique, individually and combined, was performed following distinct stages of the process chain. In addition to removing asperities, the samples after LP had contact angles within the hydrophilic range. In contrast, all functionalized surfaces presented hydrophobicity. Oxides were predominant on these samples, while prior to the second laser processing step, the presence of TiN and TiC was also observed. The cell growth viability study indicated that any post-process applied did not negatively affect the biocompatibility of the parts. The presented approach was considered a suitable post-process option for achieving different functionalities in localized areas of the parts, for replacing certain steps of the process chain, or a combination of both.

Carbon-nanotube reinforcement of DNA-silica nanocomposites yields programmable and cell-instructive biocoatings.

Biomedical applications require substrata that allow for the grafting, colonization and control of eukaryotic cells. Currently available materials are often limited by insufficient possibilities for the integration of biological functions and means for tuning the mechanical properties. We report on tailorable nanocomposite materials in which silica nanoparticles are interwoven with carbon nanotubes by DNA polymerization. The modular, well controllable and scalable synthesis yields materials whose composition can be gradually adjusted to produce synergistic, non-linear mechanical stiffness and viscosity properties. The materials were exploited as substrata that outperform conventional culture surfaces in the ability to control cellular adhesion, proliferation and transmigration through the hydrogel matrix. The composite materials also enable the construction of layered cell architectures, the expansion of embryonic stem cells by simplified cultivation methods and the on-demand release of uniformly sized stem cell spheroids.

Biopebble Containers: DNA-Directed Surface Assembly of Mesoporous Silica Nanoparticles for Cell Studies.

The development of methods for colloidal self-assembly on solid surfaces is important for many applications in biomedical sciences. Toward this goal, described is a versatile class of mesoporous silica nanoparticles (MSN) that contain on their surface various types of DNA molecules to enable their self-assembly into micropatterned surface architectures useful for cell studies. Monodisperse dye-doped MSN are synthesized by biphase stratification and functionalized with an aptamer oligonucleotide that serves as gatekeeper for the triggered release of encapsulated molecular cargo, such as fluorescent dye rhodamine B or the anticancer drug doxorubicin. One or two additional types of oligonucleotides are installed on the MSN surface to enable DNA-directed immobilization on solid substrates bearing patterns of complementary capture oligonucleotides. It is demonstrated that this strategy can be used for efficient self-assembly of microstructured surface architectures, which not only promote the adhesion and guidance of cells but also are capable of affecting the fate of adhered cells through triggered release of their cargo. It is believed that this approach is useful for diverse applications in tissue engineering and nanobio sciences.

A set-up for simultaneous measurement of second harmonic generation and streaming potential and some test applications.

We present a measurement cell that allows simultaneous measurement of second harmonic generation (SHG) and streaming potential (SP) at mineral-water interfaces with flat specimen that are suitable for non-linear optical (NLO) studies. The set-up directly yields SHG data for the interface of interest and can also be used to obtain information concerning the influence of flow on NLO signals from that interface. The streaming potential is at present measured against a reference substrate (PTFE). The properties of this inert reference can be independently determined for the same conditions. With the new cell, for the first time the SHG signal and the SP for flat surfaces have been simultaneously measured on the same surface. This can in turn be used to unambiguously relate the two observations for identical solution composition. The SHG test of the cell with a fluorite sample confirmed previously observed differences in NLO signal under flow vs. no flow conditions in sum frequency generation (SFG) investigations. As a second test surface, an inert ("hydrophobic") OTS covered sapphire-c electrolyte interface was studied to verify the zeta-potential measurements with the new cell. For this system we obtained combined zeta-potential/SHG data in the vicinity of the point of zero charge, which were found to be proportional to each other as expected. Furthermore, on the accessible time scales of the SHG measurements no effects of flow, flow velocity and stopped flow occurred on the interfacial water structure. This insensitivity to flow for the inert surface was corroborated by concomitant molecular dynamics simulations. Finally, the set-up was used for simultaneous measurements of the two properties as a function of pH in automated titrations with an oxidic surface. Different polarization combinations obtained in two separate titrations, yielded clearly different SHG data, while under identical conditions zeta-potentials were exactly reproduced. The polarization combination that is characteristic for dipoles perpendicular to the surface scaled with the zeta-potentials over the pH-range studied, while the other did not. The work provides an advanced approach for investigating liquid/surface interactions which play a major role in our environment. The set-up can be upgraded for SFG studies, which will allow more detailed studies on the chemistry and the water structure at a given interface, but also the combined study of specific adsorption including kinetics in combination with electrokinetics. Such investigations are crucial for the basic understanding of many environmental processes from aquatic to atmospheric systems.

Percutaneous left atrial appendage closure with a novel self-modelizing device: a pre-clinical feasibility study.

The aim of the study is to evaluate the feasibility and safety of a new left atrial appendage (LAA) occluder. Twelve pigs were included. In 2 pigs the implantation process failed due to pericardial tamponade in 1 pig and device embolization in the other pig. The placement of the devices was controlled via TEE and fluoroscopy. After 6 weeks of implantation the hearts were explanted. The devices were found to be easy to deploy and showed a very good adaptation to the LAA tissue. Eight out of 10 pigs had full closure of the LAA directly after implantation. After six weeks, due to the self-modelizing properties of the device, all pigs had a full closure of the LAA. The macroscopic evaluation of the explanted hearts showed that all devices were securely integrated in LAA tissues. There was one case of mild pericarditis but no macroscopic signs of inflammation on the device surrounding endocardium. The explantation revealed that device loops had penetrated the LAA tissue in three pigs. However, no signs of bleeding, pericardial effusion, or other damage to the LAA wall could be detected and the pigs were in good condition with normal weight gain and no clinical symptoms. The Occlutech® LAA occluder achieved complete closure of the LAA in all pigs, and remained in the LAA, with benign healing and no evidence of new thrombus or damage to surrounding structures. Moreover, the uncompromised survival of all implanted pigs demonstrates the feasibility and safety of the device.

Effects of radiographic contrast media on the micromorphology of the junctional complex of erythrocytes visualized by immunocytology.

Effects of radiographic contrast media (RCM) application were demonstrated in vitro and in vivo where the injection of RCM into the A. axillaris of patients with coronary artery disease was followed by a significant and RCM-dependent decrease of erythrocyte velocity in downstream skin capillaries. Another study in pigs revealed that the deceleration of erythrocytes coincided with a significant reduction of the oxygen partial pressure in the myocardium--supplied by the left coronary artery--after the administration of RCM into this artery. Further reports showed RCM dependent alterations of erythrocytes like echinocyte formation and exocytosis, sequestration of actin or band 3 and the buckling of endothelial cells coinciding with a formation of interendothelial fenestrations leading to areas devoid of endothelial cells. Key to morphological alterations of erythrocytes is the membrane cytoskeleton, which is linked to the band 3 in the erythrocyte membrane via the junctional complex. Fundamental observations regarding the cell biological and biochemical aspects of the structure and function of the cell membrane and the membrane cytoskeleton of erythrocytes have been reported. This review focuses on recent results gained, e.g., by advanced confocal laser scanning microscopy of different double-stained structural elements of the erythrocyte membrane cytoskeleton.

Effect of radiographic contrast media on the spectrin/band3-network of the membrane skeleton of erythrocytes.

The membrane of red blood cells consists of a phospholipid bilayer with embedded membrane proteins and is associated on the cytoplasmatic side with a network of proteins, the membrane skeleton. Band3 has an important role as centre of the functional complexes e.g. gas exchange complex and as element of attachment for the membrane skeleton maintaining membrane stability and flexibility. Up to now it is unclear if band3 is involved in the morphology change of red blood cells after contact with radiographic contrast media. The study revealed for the first time that Iopromide induced markedly more severe alterations of the membrane skeleton compared to Iodixanol whose effects were similar to erythrocytes suspended in autologous plasma. A remarkable clustering of band3 was found associated with an accumulation of band3 in spicules and also a sequestration of band3 to the extracellular space. This was evidently accompanied by a gross reduction of functional band3 complexes combined with a dissociation of spectrin from band3 leading to a loss of homogeneity of the spectrin network. It could be demonstrated for the first time that RCM not only induced echinocyte formation but also exocytosis of particles at least coated with band3.

Selective immobilization of Sonic hedgehog on benzylguanine terminated patterned self-assembled monolayers.

Patterned two-component, self-assembled monolayers on gold were produced by UV lithography. An oligo(ethylene glycol) terminated disulfide served as inert matrix reducing unspecific protein adsorption and cell adhesion. The second component of the self-assembled monolayer (SAM) presented a benzylguanine moiety for the immobilization of Sonic hedgehog (Shh) fused to a mutant O(6)-alkylguanine-DNA alkyltransferase (SNAP-tag™). The enzymatic activity of the SNAP-tag allows selective and covalent immobilization of the linked Shh. Time-of-flight secondary ion mass spectrometry verified the correct lateral distribution of the benzylguanine head groups in the patterned SAM. The quantification of unspecific and specific protein binding to mixed SAMs showed increased adsorption of albumin with increasing benzylguanine/(ethylene glycol) ratios. However, the immobilization of SNAP-tagged Shh was not blocked by pre-adsorbed albumin. Furthermore, the obtained micro-patterned substrates permitted direct immobilization of SNAP-tagged Shh even in the presence of many competing proteins from conditioned media of transfected HEK293 cells. Therefore, the presented system is suited for the controlled immobilization of fusion proteins from complex mixtures avoiding purification steps.

Rapid prototyping of microstructures in polydimethylsiloxane (PDMS) by direct UV-lithography.

Microstructuring of polydimethylsiloxane (PDMS) is a key step for many lab-on-a-chip (LOC) applications. In general, the structure is generated by casting the liquid prepolymer against a master. The production of the master in turn calls for special equipment and know how. Furthermore, a given master only allows the reproduction of the defined structure. We report on a simple, cheap and practical method to produce microstructures in already cured PDMS by direct UV-lithography followed by chemical development. Due to the available options during the lithographic process like multiple exposures, the method offers a high design flexibility granting easy access to complex and stepped structures. Furthermore, no master is needed and the use of pre-cured PDMS allows processing at ambient (light) conditions. Features down to approximately 5 µm and a depth of 10 µm can be realised. As a proof of principle, we demonstrate the feasibility of the process by applying the structures to various established soft lithography techniques.

Laser modulated transmembrane convection: Implementation in cancer chemotherapy.

Transmembrane diffusion imposes fundamental limits to the uptake of cytostatic drugs executing their function intracellularly. Here, we report that transmembrane convection-a mechanism exploiting the effect of moderately intense 670nm laser light on the density and viscosity of nanoscopic interfacial water layers (IWL) in the cell-forces cancer cells to uptake high doses of cytostatic drugs in a short time. Transmembrane convection is a viable alternative to established uptake forms (i.e., it works complementary to diffusive processes) and breaks the limits imposed by diffusion. We demonstrate the potency of the method in human cervical cancer cells, HeLa, using the anticancer compounds doxorubicin (DOX), methotrexate (MTX) and epigallocatechin gallate (EGCG). The method is applicable to virtually the entire chemotherapeutic arsenal and is expected to help overcome multidrug resistance in cancer cells.

Extraordinary anticancer effect of green tea and red light.

OBJECTIVE: Increasing observational evidence suggests that epigallocatechin gallate--the major polyphenolic component of green tea--is instrumental in suppressing the growth of cancer cells. Therefore, methods that promise to enhance the suppressive potential of green tea have the highest clinical relevance. BACKGROUND DATA: Human cervical cancer cells, HeLa, the first continuous cancer cell line, represent a mainstay model in cancer research. Green tea inhibited their growth, whereas their exposure to moderate levels of laser light resulted in an opposite effect. Both effects are individually documented in the literature. METHODS: HeLa cells were supplemented with green tea, irradiated with moderately intense laser light (670 nm) for 1 min, and incubated for 52 h. RESULTS: We found an extraordinary inhibition of HeLa cells by a combination of green tea and red light. We achieved an inhibition of 1,460%, compared with non-irradiated samples. CONCLUSION: Our result receives clinical relevance from a recent study in which epigallocatechin gallate suppressed the growth of melanoma in vivo.

Influence of spray-dried hydroxyapatite-5-fluorouracil granules on cell lines derived from tissues of mesenchymal origin.

In our previous work we described the preparation and characterization of spray dried hydroxyapatite micro granules loaded with 5-fluorouracil (5-FU). These loaded particles are used as a model drug delivery system (DDS). In this study we examined the in vitro response of two cell lines derived from different tissues to 5-FU loaded granules (LG). Both cell lines, either L929 cells of a mouse fibroblast lineage or cells originating from a rat osteosarcoma (ROS 17/2.8) showed a dose dependent decrease in cell proliferation in response to 5-FU-, either dissolved in the culture medium or loaded onto particles. The response of the two cell lines to loaded and nonloaded particles was different. The effect of LG and of a corresponding concentration of free 5-FU was practically the same for the ROS 17/2.8 cells indicating that ROS 17/2.8 cells were not affected by the carrier material. In contrast, L929 cells showed a slight decrease in cell proliferation also in the presence of granules not loaded with 5-FU. This is thought to be attributed to the inhibition of mitogenesis by phosphocitrates, already demonstrated in fibroblasts. In summary, we found that the loaded 5-FU kept its effectivity after the spray drying process and that the response towards the granules varied with cell type. This is the first step towards a tissue specific DDS.

Effects of fractions of traffic particulate matter on TH2-cytokines, IgE levels, and bronchial hyperresponsiveness in mice.

In recent decades an increased prevalence of allergic conditions has been observed in developed countries. Although lifestyles, exposure to infection, and diet are all likely important factors, many studies have also shown a strong link between industrialization and allergy. The aim of this study was to investigate which extract fractions from traffic particulate matter (TPM, collected in a tunnel in Prague) have the greatest impact on different inflammatory and immunological parameters, such as cytokine production, levels of immunoglobulin E (IgE) antibodies, and bronchial hyperresponsiveness (BHR) in mice, when the extracts are used together with birch pollen for immunization. BP2 mice were immunized with birch pollen and different fractions of TPM (fractions 1-8). They were provoked intranasally with a mixture of pollen and TPM or pollen alone before they were challenged with methacholine. The BHR was evaluated in a whole-body plethysmograph. Th2 cytokines and fibronectin concentrations were measured, and differential cell counts were performed in the bronchioalveolar lavage (BAL) fluid. Sera were collected for determination of antibody titers. The highest titers of IgE and the highest BHR were found in the positive control mice (immunized and provoked with a mixture of pollen and TPM), followed by mice immunized with pollen and fraction 2 (which contains organic acids). Fraction 2 also induced the highest number of eosinophils and increased levels of interleukin 5 (IL-5) in the BAL fluid. The highest levels of IL-5, in BAL fluid and sera, were obtained in mice immunized with fraction 6 (moderately polar compounds), a somewhat surprising result since those mice did not produce any IgE, did not have any eosinophils in their BAL, or showed almost no BHR. Our data demonstrate that fractions 2 (organic acids) and 7 (highly polar compounds) seem to contain potential adjuvants stimulating the IL-5 production, the IgE synthesis, the eosinophil recruitment, and the bronchial hyperreactivity. Further characterization at the molecular level is now necessary to be able to identify the exact nature of those potential adjuvants. This will be of help in the future to improve the quality of the urban air aerosol.

Epilithic Lichen-Atmospheric Deposition Monitors of Trace Elements and Organohalogens?

Epilithic lichen (Xanthoria elegans in Canada, Lecanora muralis in Germany) were gathered from 17 locations in Ontario, Canada (from Lake Ontario to James Bay) and 43 locations in Germany (from the Alps to the North Sea and from the Baltic Sea to the Erzgebirge). Sample aliquots were digested in nitric acid and trace elements were analyzed by inductively coupled plasma-mass spectrom-etry techniques. The organohalogens were determined as absorbable organic halogens (AOXs) by coulometry. Concentration ranges from Germany for trace element samples and AOXs were determined. The lichen showed high spatial resolution in their element enrichment patterns. This allowed for differentiation between natural and anthropogenic dominance in ambient air concentrations. This biomonitoring method has proven to be very sensitive, fast, and reliable. No clear relationship could be found between trace element and AOX concentrations. The AOX values may reflect individual metabolic rates of the fungal partner in lichen symbionts.